FATAL: Database "myDB" does not exist in the system catalog.

hi there everyone,
just having a problem to create a database in the system catalog.
i am a beginner to JDBC.
i have created a database by using ''create database myDB'' under cygwin (winXP).
but still getting the error.
so am i doing it right??
FATAL: Database "myDB" does not exist in the system catalog.
my java code
String url = "jdbc:postgresql://localhost:5432/myDB";
thx in advance

ok,,, i've solved the problem...
when i '' create database myDB'', it actually crreated ''mydb'' instand of ''myDB'', so myDB does not exist.
also need to connected to mydb not in template1..... stupid me.

Similar Messages

Cannot drop the table because it does not exist in the system catalog. Transaction context in use by another session

Hi Every one,
An error has occurred during report processing. (rsProcessingAborted)
Get Online Help
Query execution failed for data set 'NonFinTran'. (rsErrorExecutingCommand)
Get Online Help
Cannot drop the table '#NonFinTran', because it does not exist in the system catalog. Cannot drop the table '#MultipleNonFinTran',
because it does not exist in the system catalog. Transaction context in use by another session.
NOTE: NonFinTran &
MultipleNonFinTran are
the Temp table in my storedPoc.
Please any help me to solve this issue.
Thanks & Regards,
Anil Kumar
Anil Kumar

Hi Harsh,
Below is my Stored Proc
SELECT @ServerName=datasource from master.dbo.sysservers WHERE catalog='Voyager'
SELECT @ServerName3=datasource from master.dbo.sysservers WHERE catalog='AuditLog'
SELECT @ServerName2=datasource from master.dbo.sysservers WHERE catalog='Portal'
IF @ServerName IS NOT NULL SET @ServerName='[' + @ServerName + '].' ELSE SET @ServerName=''
IF @ServerName3 IS NOT NULL SET @ServerName3='[' + @ServerName3 + '].' ELSE SET @ServerName3=''
IF @ServerName2 IS NOT NULL SET @ServerName2='[' + @ServerName2 + '].' ELSE SET @ServerName2=''
IF Exists(Select * From tempdb.dbo.SysObjects Where Name Like '#NonFinTran%')
DROP TABLE #NonFinTran
IF Exists(Select * From tempdb.dbo.SysObjects Where Name Like '#MultipleNonFinTran%')
DROP TABLE #MultipleNonFinTran
CREATE TABLE #NonFinTran (FirstName VARCHAR(40), TaxId VARCHAR(40), TrxID VARCHAR(40), Status VARCHAR(255), Field1 VARCHAR(255), Field2 VARCHAR(255),
Field3 VARCHAR(255), Field4 VARCHAR(255), Field5 VARCHAR(255), Field6 VARCHAR(255), DateTime DATETIME,
BranchID CHAR(3), BankID CHAR(1), FromAccountID VARCHAR(255), FromAccountType VARCHAR(255))
CREATE TABLE #MultipleNonFinTran (FirstName VARCHAR(40), TaxId VARCHAR(40), TrxID VARCHAR(40), Status VARCHAR(255), Field1 VARCHAR(255), Field2 VARCHAR(255),
Field3 VARCHAR(255), Field4 VARCHAR(255), Field5 VARCHAR(255), Field6 VARCHAR(255), DateTime DATETIME,
BranchID CHAR(3), BankID CHAR(1), FromAccountID VARCHAR(255), FromAccountType VARCHAR(255))
INSERT #NonFinTran
EXEC('SELECT FirstName, TaxID,
TrxID, Status, TrxField1, TrxField2, TrxField3, TrxField4, TrxField5, TrxField6, DateTime, '''', '''', '''', ''''
FROM ' + @ServerName3 + 'AuditLog.dbo.CCAuditLogEntryView AS Audit, ' + @ServerName + 'Voyager.dbo.CCUser AS CCUser
WHERE CCUser.UserID = Audit.UserID
AND Audit.Succeeded = 1
AND Audit.TrxID IN (''ChangeBillPayDefaultAccountEdit'',''ChangeExpiryUserPassword'',''ChangePasswordEdit'',
''ChangeUserPassword'',''ManageAddressMaint'',''ManageContactMaint'',''ManageSecretQuestionAnswerEdit'',
''ManageTransLimitMaint'',''OtherBankAccountMaintAdd'',''OtherBankAccountMaintDelete'',''OtherBankAccountMaintEdit'',
''WithinAmBankAccountMaintAdd'',''WithinAmBankAccountMaintDelete'',''WithinAmBankAccountMaintEdit'',
''SetAccountMaskPreferenceAudit'',''ChangeLoginIdAudit'')
AND DATEDIFF(DAY, CONVERT(DATETIME, CONVERT(VARCHAR(10), ''' + @StartDate + '''), 103), Audit.DateTime) >= 0
AND DATEDIFF(DAY, CONVERT(DATETIME, CONVERT(VARCHAR(10), ''' + @EndDate + '''), 103), Audit.DateTime) <= 0 ')
INSERT #MultipleNonFinTran
EXEC('SELECT DISTINCT FirstName, TaxID,
TrxID, Status, TrxField1, TrxField2, TrxField3, TrxField4, TrxField5, TrxField6, Audit.DateTime as AuditDateTime,
(SELECT DISTINCT SUBSTRING(A.BranchCode,3,3) FROM ' + @ServerName + 'AuditLog.dbo.CCAuditLogEntryView X INNER JOIN ' + @ServerName + 'Voyager.dbo.CCuser U
ON X.UserId = U.UserId INNER JOIN ' + @ServerName + 'Voyager.dbo.AMHZ_CustomerProfile P ON P.EnrolId = U.TAXID
INNER JOIN ' + @ServerName + 'Voyager.dbo.AMHZ_AccountListing A ON A.CIFNO = P.CIFNO
WHERE X.UserId = Audit.UserId AND A.AccountNo = SUBSTRING(Audit.TrxField1,11,16) AND P.CIFNO = A.CIFNO
AND (SUBSTRING(A.BranchCode,3,3) <> NULL OR SUBSTRING(A.BranchCode,3,3) <> '''')
AND CHARINDEX(''AccountID='', Audit.TrxField1, 1) > 0),
SUBSTRING(TrxField1,14,1), CASE WHEN CHARINDEX(''AccountID='', TrxField1, 1) > 0 THEN
SUBSTRING(TrxField1,11,16) ELSE '''' END, CASE WHEN CHARINDEX(''AccountType='', TrxField2, 1) > 0 THEN SUBSTRING(TrxField2,13,3) ELSE '''' END
FROM ' + @ServerName3 + 'AuditLog.dbo.CCAuditLogEntryView AS Audit, ' + @ServerName + 'Voyager.dbo.CCUser AS CCUser
WHERE CCUser.UserID = Audit.UserID
AND Audit.Succeeded = 1
AND Audit.TrxID IN (''SetAccountAttributesAudit'',''SetAccountFriendlyNameAudit'',
''AccountProfileMaintULDelete'',''AccountProfileMaintLHAAdd'',''AccountProfileMaintLSCAdd'')
AND DATEDIFF(DAY, CONVERT(DATETIME, CONVERT(VARCHAR(10), ''' + @StartDate + '''), 103), Audit.DateTime) >= 0
AND DATEDIFF(DAY, CONVERT(DATETIME, CONVERT(VARCHAR(10), ''' + @EndDate + '''), 103), Audit.DateTime) <= 0 ')
SET @stmt = '
SELECT * FROM
SELECT BranchName,
CASE WHEN SUBSTRING(FromAccountID,1,6) IN (''519901'',''559409'') THEN ''DC''
ELSE
CASE FromAccountType WHEN ''01'' THEN ''SA '' WHEN ''02'' THEN ''CA '' WHEN ''03'' THEN ''FD ''
WHEN ''SA'' THEN ''SA '' WHEN ''CA'' THEN ''CA '' WHEN ''FD'' THEN ''FD '' ELSE FromAccountType + '' ''
END
END +
case when Len(FromAccountID) =16 Then
CASE FromAccountType WHEN ''VC'' THEN
SUBSTRING(FromAccountID,1,6)+''******''+SUBSTRING(FromAccountID,13,4)
WHEN ''MC'' THEN SUBSTRING(FromAccountID,1,6)+''******''+SUBSTRING(FromAccountID,13,4) END
when Len(FromAccountID) =15 Then
CASE FromAccountType WHEN ''VC'' THEN
SUBSTRING(FromAccountID,1,6)+''******''+SUBSTRING(FromAccountID,13,3)
WHEN ''MC'' THEN SUBSTRING(FromAccountID,1,6)+''******''+SUBSTRING(FromAccountID,13,3) END
ELSE FromAccountID
ENd
AS FromAcctNo,
CASE TrxId
WHEN ''AccountProfileMaintLHAAdd'' THEN ''Link Account/Card''
WHEN ''AccountProfileMaintLSCAdd'' THEN ''Link Account/Card''
WHEN ''APMFamilyFirstAdd'' THEN ''Link Family First Account''
WHEN ''AccountProfileMaintULDelete'' THEN ''Unlink Account/Card''
WHEN ''BalInqFD'' THEN CASE WHEN Field3 IN (''APMLink=SUCCESS'') THEN ''APMLink Success'' ELSE ''Fixed Deposit Balance Inquiry'' END
WHEN ''BalInqCASA'' THEN CASE WHEN Field3 IN (''APMLink=SUCCESS'') THEN ''APMLink Success'' ELSE
   CASE WHEN FromAccountType IN (''SA'',''01'') THEN ''Savings Account Balance Inquiry''
   ELSE ''Current Account Balance Inquiry''
   END
  END
WHEN ''StopCheck'' THEN ''Stop Cheque Request''
WHEN ''CheckReorder'' THEN ''Order Your Cheque''
WHEN ''CheckInquiry'' THEN ''Cheque Inquiry''
WHEN ''TransHistFD'' THEN ''Fixed Deposit Transaction History''
WHEN ''TransHistCASA'' THEN
CASE WHEN FromAccountType IN (''SA'',''01'') THEN ''Savings Account Transaction History'' ELSE ''Current Account Transaction History'' END
WHEN ''StmtInqCC'' THEN
CASE WHEN FromAccountType IN (''DR'',''03'') THEN ''Debit Card Statement Inquiry'' ELSE ''Credit Card Statement Inquiry'' END
WHEN ''StmtInqDA'' THEN
CASE WHEN FromAccountType IN (''SA'',''01'') THEN ''Savings Account Statement Inquiry'' ELSE ''Current Account Statement Inquiry'' END
WHEN ''StmtReq'' THEN ''Printed Statement Request''
WHEN ''StmtInqIAMSTAR'' THEN ''E-AMSTAR Statement Inquiry''
WHEN ''Repayment/Transfer Inquiry'' THEN ''Repayment/Transfer Inquiry''
WHEN ''Account Inquiry'' THEN ''Account Inquiry''
WHEN ''Payment Inquiry'' THEN ''Payment Inquiry''
END AS TransType,
FirstName AS CustomerName,
TaxId, CONVERT(VARCHAR, DateTime, 103) AS Date, CONVERT(VARCHAR, DateTime, 108) AS Time
FROM #NonFinTran, ' + @ServerName3 + 'Portal.dbo.TB_Branch AS TB_Branch
WHERE
BranchId = TB_Branch.BranchCode
AND (TB_Branch.InstCode IN (''00001'', ''00003'',''001'',''002''))
AND (FromAccountType IN (''SA'', ''CA'', ''FD'', ''01'', ''02'', ''03'')))'
EXEC (@stmt)
IF Exists(Select * From tempdb.dbo.SysObjects Where Name Like '#NonFinTran%')
DROP TABLE #NonFinTran
IF Exists(Select * From tempdb.dbo.SysObjects Where Name Like '#MultipleNonFinTran%')
DROP TABLE #MultipleNonFinTran
Anil Kumar

Error while creating connection pool "FATAL: database "null" does not exist

Hi,
Iam trying to create a XA connection pool using postgres driver (postgresql-8.3-603.jdbc3.jar) on Weblogic 8.1.6.0 from the Admin Console.
I have provided the following info in the JDBC config
Driver Class Name: org.postgresql.xa.PGXADataSource.
JDBC URL: jdbc:postgresql://192.168.192.112:5432/sample1
UserName: postgres
Password: Postgres
When i click Test Driver Configuration. Iam getting the following error
"FATAL: database "null" does not exist"
if i change the Driver Class Name to "org.postgresql.Driver", it is working fine. But as iam trying to create XA datasource i need to use the XA Driver class name.
Can someone tell me how to resolve this issue ?
The postgres version iam using is 8.3.1

Hi Joe,
The driver is in the classpath.
Please find the stack trace.
org.postgresql.util.PSQLException: FATAL: database "null" does not exist
at org.postgresql.core.v3.ConnectionFactoryImpl.readStartupMessages(Conn
ectionFactoryImpl.java:444)
at org.postgresql.core.v3.ConnectionFactoryImpl.openConnectionImpl(Conne
ctionFactoryImpl.java:99)
at org.postgresql.core.ConnectionFactory.openConnection(ConnectionFactor
y.java:66)
at org.postgresql.jdbc2.AbstractJdbc2Connection.<init>(AbstractJdbc2Conn
ection.java:124)
at org.postgresql.jdbc3.AbstractJdbc3Connection.<init>(AbstractJdbc3Conn
ection.java:30)
at org.postgresql.jdbc3.Jdbc3Connection.<init>(Jdbc3Connection.java:24)
at org.postgresql.Driver.makeConnection(Driver.java:386)
at org.postgresql.Driver.connect(Driver.java:260)
at java.sql.DriverManager.getConnection(DriverManager.java:512)
at java.sql.DriverManager.getConnection(DriverManager.java:171)
at org.postgresql.ds.common.BaseDataSource.getConnection(BaseDataSource.
java:83)
at org.postgresql.xa.PGXADataSource.getXAConnection(PGXADataSource.java:
47)
at org.postgresql.xa.PGXADataSource.getXAConnection(PGXADataSource.java:
32)
at weblogic.management.console.utils.JDBC.testConnection(JDBC.java:185)
at weblogic.management.console.actions.mbean.JDBCConnectionPoolTestActio
n.prePerform(JDBCConnectionPoolTestAction.java:114)
at weblogic.management.console.actions.mbean.DoMBeanWizardAction.perform
(DoMBeanWizardAction.java:215)
at weblogic.management.console.actions.internal.ActionServlet.doAction(A
ctionServlet.java:182)
at weblogic.management.console.actions.internal.ActionServlet.doPost(Act
ionServlet.java:86)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run
(ServletStubImpl.java:1077)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:465)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:348)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationActio
n.run(WebAppServletContext.java:7047)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Authenticate
dSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:
121)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppSe
rvletContext.java:3902)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestIm
pl.java:2773)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:224)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:183)

Connect-SPOService : The Application ID (AppID) for which the service ticket is requested does not exist on the system.

I am trying to connect to SharePoint in my Office 365 environment by following https://support.office.com/article/Set-up-the-SharePoint-Online-Management-Shell-environment-7b931221-63e2-45cc-9ebc-30e042f17e2c and I am getting:
Connect-SPOService : The Application ID (AppID) for which the service ticket is requested does not exist on the system.
Is there some setting I need to change on the O365 side? Thanks.

Hi,
Based on your description, my understanding is that you want connect SharePoint Online using PowerShell.
Please make sure that the following software is installed.
Windows Management Framework 3.0
SharePoint Online Management Shell
And then, open the SharePoint Online Management Shell and use the Script below to test
whether it works.
$User = "[username]@[tenant].onmicrosoft.com"
$Pass = "[password]"
$creds = New-Object System.Management.Automation.PSCredential($User,(ConvertTo-SecureString $Pass -AsPlainText -Force));
Connect-SPOService -Url https://[tenant]-admin.sharepoint.com -Credential $creds
Get-SPOSite
More information:
http://blog.falchionconsulting.com/index.php/2013/01/using-powershell-to-manage-sharepoint-2013-online/
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support

Tax Code does not exist in the system (T007A)

Hi All
When we try to create a receipt for a particular expense type in ESS Travel & Expenses, we get the follwing error "Tax code Z0 does not exist in the system (T007A)". Upon creating a tax code Z0 it gives the following error "Tax code does not exist in the system (T007A)". When we change the Receipt currency to USD instead of Bristish Pound it gets accepted without the error. It works perfectly fine when expense report created using GUI. The error occurs only when we create the expense report using Portal ESS T&E. I was not able to find anything related to this in the SDN. If any of you could help me out, that would be great.
Thanks, Raj

Hello Mr. Raj!
I checked the related issues that other customers reported.
I came up with a list of things you can try that may help you solve your issue.
a) Check if the field V_706D_B-LAND1 is filled with the home country in the IMG step 'Define Global Settings'. So may I ask you to check. Moreover, if this is not the reason, may I also ask you, if you get the same error when using our backend test transaction PR_WEB_1200? Thank you,
b) Could you please check that you don't have any expense type with value " "(blank) in the tax code field in V_T706B1?
c) Apply Note 1129853 - Web: Input tax code for credit card receipts
d) Please follow in IMG:
Financial Accounting
Travel Management
Travel Expenses
   Master Data
    Control Parameters for Travel Expenses
     Define Global Settings
Input Tax
Country                                       { Your country here }
Enter an input tax code for 0% input tax [    ] <<<
If here it's blank, this must be filled with a tax code. I found this out when I set the field "Input Tax per Travel Expense" then I get a warning "Enter an input tax code for 0% input tax".
The reason for this is that in your system, you don't have a "blank" tax code and it looks for this entry. Please kindly define a tax code in this setting.
I hope I was able to help you with this information.
Wilian Segatto
SAP Support - HCM/XSS

Checklist _ product does not exist in the system

Hello experts,
I am customizing Checklist for CRM 7 Service.
However, I am struggling as I have the following error : "Item 20: The product does not exist in the system". Indeed, I have seen that the checklist creates an item with the item category 'FCHK' in the transaction type. However, the product for this item is empty in 'crmd_order' and creates error in the web_ui. Another error appears, which is linked to the first one, 'Item20:The item category FCHK is not permitted for the product'.
Any help on the checklist customizing would be appreciated.
Regards,
Anaïs Jaussaud

Hi Anais,
Please go through : How to Configure Checklists in SAP Solution Manager 7.1 -- Part 1
Also please see that item category determination has to be set for the check list product other wise no determination will take place properly
<Transaction type> + CKCU = CHKL
/Hasan

Tax code V1 does not exist in the system (T007A)

Hi all,
Need some expert help here. I'm testing this travel management solution provided by SAP. I have configured all so that the functionalities are apparent in the ESS Business package. Unfortunately, when i tried to create a 'travel request' via SAP Portal, i'm getting the error message "Tax code V1 does not exist in the system (T007A)". The error message appears once on review page.
Since this is a Sandpit environment, i believe taht there might be numerous missing config. Can anyone point me to the right direction? Thanks
Regards

Hi All,
Thanks for the quic reply. That solved the problem for travel request. I maintained tax type V1 and N1 and all is good. However, i got another new error now when i try to create my travel expense. After filling up all the necessary info (tested for accomodation booking), i got the following error:
"Entry not found in table T706V. Argument: 14P EUR L 0191520080909"
I went to that table but couldn't make sense out of it. Any pointers please? Thanks
Regards

Trip schema PL does not exist in the system (T706S)

Hi Guru's,
I have configured Travel Management. When saving Travel request tcode - 'TRIP', it gives an error 'Trip schema PL does not exist in the system (T706S) Message no. PTRA_WEB_INTERFACE036'. I have maintained schema for Variant '40' Indian Accounting.
Thanks in Advance.
Kapil Nehra

Hi Kapil,
I am also facing the same problem....Please let me know how u had solved the problem.
Its important.
Thanks
vnk

Trip type does not exist in the system (T702G)

Hi,
In HR - Module - Travel Management.
I am trying to create a travel request for an employee.
i am getting the error message :
Statutory trip type does not exist in the system (T702G)
how to assign the trip type to a particular employee.
regards
sam

If you are applying as employee you need to configure trip schema and single field control for webdynpro provided you are using webdynpro application as employee.
there in the tri provision variant you need to enter the variant you have created.
Under that select the travel planning trip schema PL.
on right hand side you have a field trip schema: statutory where you need to select appropriate schema from drop-down.

PO does not exist in the system

Hi,
While creating sales order PO not given and saved the Sales order with out PO No. Again in change mode realised that PO not given and when im trying to give PO following are the error message.
Purchase order 428264 does not exist in the system (see long text)
Message no. V1583
Kindly send the responses.
Thanks
Madhu.

Hi,
I am taking two different posts from this thread:
1st:
1. Sales order been created with out PO number.
2. In the change mode system allows to key in PO number.
3. When keying in the PO number system throws an error ' PO 12345 does not exist in the system".
Now my query is how to find the right PO number.
Following are the long text.
Purchase order 12345 does not exist in the system (see long text)
Message no. V1583
Diagnosis
You are creating an order for a consolidated company and must eliminate internal business volume. For this reason, the system tries to determine if the related purchase order exists. This is not the case, however.
Procedure
Enter the relevant purchase order number
This sounds as you go to T. Code: VA02, Keyed-in your Sales Order No. and then hit "Enter". Now inside Sales Order, you are trying to key-in P.O. No.
Now, 2nd post:
Im sorry the issue is not resolved yet. The PO No which user is keying in the sales order is quite unique. When i checked the previous PO's in that series it is there. But the issue is for the given set of sales area it is not there.
Following are the steps performed:
1. In VA02 in search critria given the series (OCJ*).
2. There are set of sales orders available for the given series.
3. But these series of sales order are from different set of sales area.
4. There are no sales order available in the series for the given sales area.
Kindly suggest whether im missing any config setting?
Which suggests as you go to T. Code: VA02, and inside field: Sales Order, you Press F4 (or you have entered P.O. No. under Tab: Search Criteria).
Now, there are few queries:
1. Have you entered P.O. No. within Sales Order, while created? If not, then how come System will search for Sales Order, having specified P.O. No.?
Secondly,
If, you are searching through F4 and you have created Sales Order with the same P.O. No., then within new window that pops-up; go to tab: Sales Document according to Customer PO No.
Field: Purchase Order No.
key in your filter condition (P.O. series with appropriate *) and make Field: Maximum hits, blank. System will throw all the Sales Order, having P.O. Series based upon filter condition.
Now, SORT the output based upon either "Purchase Order No." or "Sales Org".
Hope, i have understood your query, now.
Best Regards,
Amit.
Note: Remember, if there is no such Sales Order with desired P.O. No., system will not list-out it in search. To do so, you have to attach P.O. No. within Sales Order under field: Purchase Order.

What is supposed to happen if the font for a control on the startup form does not exist on the system?

Say you put a button on a form and dont change the font ie ms san serif, then the app is installed on a system that does not have the font ms san serif installed. Is it supposed to throw an error when the form initializes? Since this happens before any user
code the error can go untrapped in the start up form and crashes to the system.
I discovered it does this if you specify the font in the designer to be "Arial Narrow" and it is not installed. But whats funny is the error is not font does not exist, it is "Arial Narrow" does not support style Regular. Even though
I set the font in the IDE for the control. How can I be setting it with the IDE to something that does not exist for the font I set (Arial Narrow is on the IDE system)?
I have always thought that vb would just use a different font if the control font did not exist without an error. In my case it was a secondary form so the error was trapped. But, I don't see how to trap the error if it is the startup form.

PS
"I meant that you should set the buttons font to something like
MS Sans Serif "
What if ms sans is not on the system? Then you cant do anything.
Maybe I am being picky but just sayin...
I don't suppose you're being picky specifically although I think I got a headache attempting to do the below.
I do think this is a bug though which you should probably report.
However I tried this and it worked fine. Except I had to alter the Form1.Designer.vb file to do this. I tested this. I didn't test without this to see if I would get the exception you received.
I downloaded a Font called Kingsthings Christmas from the second link in my post for links to download fonts. Added that to my systems Fonts and tested the code. Removed that from my systems fonts and tested the code. It worked in both instances.
I suspect that the Font in the Form1.Designer.VB file for the New Font for the TabControl and TreeView would work with the default system font set to use 21.75! and font style regular but if the default system font didn't support both of those then an issue
could occur obviously. So if somebody used Control Panel to set the default system font to something that doesn't support those two things then you will need to alter the code to detect what the default system font can use for those two settings
possibly.
Form1's code
Option Strict On
Imports System.Drawing.Text
Public Class Form1
Private Sub Form1_Load(sender As Object, e As EventArgs) Handles MyBase.Load
Me.Location = New Point(CInt((Screen.PrimaryScreen.WorkingArea.Width / 2) - (Me.Width / 2)), CInt((Screen.PrimaryScreen.WorkingArea.Height / 2) - (Me.Height / 2)))
TreeView1.BeginUpdate()
TreeView1.Nodes.Add("Parent")
TreeView1.Nodes(0).Nodes.Add("Child 1")
TreeView1.Nodes(0).Nodes.Add("Child 2")
TreeView1.Nodes(0).Nodes(1).Nodes.Add("Grandchild")
TreeView1.Nodes(0).Nodes(1).Nodes(0).Nodes.Add("Great Grandchild")
TreeView1.EndUpdate()
For Each f As FontFamily In New InstalledFontCollection().Families
RichTextBox1.AppendText(f.Name.ToString & vbCrLf)
Next
End Sub
End Class
Form1.Designer.VB files code which you're not supposed to alter of course.
Option Strict On
Imports System.Drawing.Text
<Global.Microsoft.VisualBasic.CompilerServices.DesignerGenerated()> _
Partial Class Form1
Inherits System.Windows.Forms.Form
'Form overrides dispose to clean up the component list.
<System.Diagnostics.DebuggerNonUserCode()> _
Protected Overrides Sub Dispose(ByVal disposing As Boolean)
Try
If disposing AndAlso components IsNot Nothing Then
components.Dispose()
End If
Finally
MyBase.Dispose(disposing)
End Try
End Sub
'Required by the Windows Form Designer
Private components As System.ComponentModel.IContainer
'NOTE: The following procedure is required by the Windows Form Designer
'It can be modified using the Windows Form Designer.
'Do not modify it using the code editor.
Dim FontToUse As Font
<System.Diagnostics.DebuggerStepThrough()> _
Private Sub InitializeComponent()
For Each f As FontFamily In New InstalledFontCollection().Families
If f.Name.ToString = "Kingthings Christmas 2" Then
FontToUse = New Font(f.Name.ToString, 24)
Exit For
Else
FontToUse = New Font(SystemFonts.DefaultFont.FontFamily.Name.ToString, 24)
End If
Next
Me.TabControl1 = New System.Windows.Forms.TabControl()
Me.TabPage1 = New System.Windows.Forms.TabPage()
Me.TabPage2 = New System.Windows.Forms.TabPage()
Me.TabPage3 = New System.Windows.Forms.TabPage()
Me.TabPage4 = New System.Windows.Forms.TabPage()
Me.TabPage5 = New System.Windows.Forms.TabPage()
Me.TreeView1 = New System.Windows.Forms.TreeView()
Me.RichTextBox1 = New System.Windows.Forms.RichTextBox()
Me.TabControl1.SuspendLayout()
Me.SuspendLayout()
'TabControl1
Me.TabControl1.Controls.Add(Me.TabPage1)
Me.TabControl1.Controls.Add(Me.TabPage2)
Me.TabControl1.Controls.Add(Me.TabPage3)
Me.TabControl1.Controls.Add(Me.TabPage4)
Me.TabControl1.Controls.Add(Me.TabPage5)
Me.TabControl1.Font = New System.Drawing.Font(FontToUse.FontFamily.Name.ToString, 21.75!, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, CType(0, Byte))
Me.TabControl1.Location = New System.Drawing.Point(6, 32)
Me.TabControl1.Name = "TabControl1"
Me.TabControl1.SelectedIndex = 0
Me.TabControl1.Size = New System.Drawing.Size(600, 183)
Me.TabControl1.TabIndex = 0
'TabPage1
Me.TabPage1.Location = New System.Drawing.Point(4, 43)
Me.TabPage1.Name = "TabPage1"
Me.TabPage1.Padding = New System.Windows.Forms.Padding(3)
Me.TabPage1.Size = New System.Drawing.Size(592, 136)
Me.TabPage1.TabIndex = 0
Me.TabPage1.Text = "TabPage1"
Me.TabPage1.UseVisualStyleBackColor = True
'TabPage2
Me.TabPage2.Location = New System.Drawing.Point(4, 43)
Me.TabPage2.Name = "TabPage2"
Me.TabPage2.Padding = New System.Windows.Forms.Padding(3)
Me.TabPage2.Size = New System.Drawing.Size(592, 136)
Me.TabPage2.TabIndex = 1
Me.TabPage2.Text = "TabPage2"
Me.TabPage2.UseVisualStyleBackColor = True
'TabPage3
Me.TabPage3.Location = New System.Drawing.Point(4, 43)
Me.TabPage3.Name = "TabPage3"
Me.TabPage3.Padding = New System.Windows.Forms.Padding(3)
Me.TabPage3.Size = New System.Drawing.Size(592, 136)
Me.TabPage3.TabIndex = 2
Me.TabPage3.Text = "TabPage3"
Me.TabPage3.UseVisualStyleBackColor = True
'TabPage4
Me.TabPage4.Location = New System.Drawing.Point(4, 43)
Me.TabPage4.Name = "TabPage4"
Me.TabPage4.Padding = New System.Windows.Forms.Padding(3)
Me.TabPage4.Size = New System.Drawing.Size(592, 136)
Me.TabPage4.TabIndex = 3
Me.TabPage4.Text = "TabPage4"
Me.TabPage4.UseVisualStyleBackColor = True
'TabPage5
Me.TabPage5.Location = New System.Drawing.Point(4, 43)
Me.TabPage5.Name = "TabPage5"
Me.TabPage5.Padding = New System.Windows.Forms.Padding(3)
Me.TabPage5.Size = New System.Drawing.Size(592, 136)
Me.TabPage5.TabIndex = 4
Me.TabPage5.Text = "TabPage5"
Me.TabPage5.UseVisualStyleBackColor = True
'TreeView1
Me.TreeView1.Font = New System.Drawing.Font(FontToUse.FontFamily.Name.ToString, 21.75!, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, CType(0, Byte))
Me.TreeView1.Location = New System.Drawing.Point(9, 229)
Me.TreeView1.Name = "TreeView1"
Me.TreeView1.Size = New System.Drawing.Size(704, 235)
Me.TreeView1.TabIndex = 1
'RichTextBox1
Me.RichTextBox1.Location = New System.Drawing.Point(9, 475)
Me.RichTextBox1.Name = "RichTextBox1"
Me.RichTextBox1.Size = New System.Drawing.Size(702, 124)
Me.RichTextBox1.TabIndex = 2
Me.RichTextBox1.Text = ""
'Form1
Me.AutoScaleDimensions = New System.Drawing.SizeF(6.0!, 13.0!)
Me.AutoScaleMode = System.Windows.Forms.AutoScaleMode.Font
Me.ClientSize = New System.Drawing.Size(720, 606)
Me.Controls.Add(Me.RichTextBox1)
Me.Controls.Add(Me.TreeView1)
Me.Controls.Add(Me.TabControl1)
Me.Name = "Form1"
Me.Text = "Form1"
Me.TabControl1.ResumeLayout(False)
Me.ResumeLayout(False)
End Sub
Friend WithEvents TabControl1 As System.Windows.Forms.TabControl
Friend WithEvents TabPage1 As System.Windows.Forms.TabPage
Friend WithEvents TabPage2 As System.Windows.Forms.TabPage
Friend WithEvents TabPage3 As System.Windows.Forms.TabPage
Friend WithEvents TabPage4 As System.Windows.Forms.TabPage
Friend WithEvents TabPage5 As System.Windows.Forms.TabPage
Friend WithEvents TreeView1 As System.Windows.Forms.TreeView
Friend WithEvents RichTextBox1 As System.Windows.Forms.RichTextBox
End Class
La vida loca

Error: The specified mailbox database [Mailbox Database Name] does not exist, when you try to export mailbox in Exchange 2007

[Symptom]
======================
In Exchange 2007, when you want to export mailbox to a .pst file, you should run the
Export-Mailbox cmdlet from a 32-bit computer that has the following installed:
The 32-bit version of the Exchange management tools
Microsoft Office Outlook 2003 SP2 or later versions
If not, you may encounter the following error message:
You check that you have these required installed, but you get the error below when you run Export-Mailbox in EMS.
“The specified mailbox database [Mailbox Database Name] does not exist.”
[Cause Analysis]
=======================================
This is because that the account you use to run Export-Mailbox cmdlet don’t have the Exchange Server Administrator role assigned.
You can check if this account has been delegated the Exchange Server Administrator role through the following path.
EMC -> Organization Configuration-> Check permissions in the result pane.
To delegate this Exchange Server Administrator role, right click on the
Organization Configuration node and choose Add Exchange Administrator,
you will see the Add Exchange Administrator window.
[More Information]
==============================
Export-Mailbox
http://technet.microsoft.com/en-gb/library/aa998579(v=exchg.80).aspx
How to Export and Import mailboxes to PST files in Exchange 2007 SP1
http://blogs.technet.com/b/exchange/archive/2007/04/13/3401913.aspx
Exchange 2007 cannot export pst files via its powershell
http://social.technet.microsoft.com/Forums/forefront/en-US/b3bc0dce-35f3-4a69-9a33-4f2a855b9f94/exchange-2007-cannot-export-pst-files-via-its-powershell?forum=exchangesvrgenerallegacy
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Hi,
Based on my test, if you make the user the owner of the database (rather than a user with the db_owner role), when you create a query, it creates it under the dbo schema rather than DOMAIN\username.
Steps to do so (in Management Studio):
Right click database, select Properties
Click File
Change Owner in the textbox
OK to confirm
Downside - other users under db_owner role will still have their username appended. So schemas have to be created for these users.
Jaynet Zhang
TechNet Community Support

DBIF_RSQL_TABLE_UNKNOWN Table AUSPN_V1 does not exist in the database with ID R/3

Hi All,
We are encountering numerous short dumps in our system caused by Table AUSPN_V1 does not exist in the database with ID R/3.
Can anyone advise how to solve the issue? Please find below portion of the short dumps.
Category               ABAP Programming Error
Runtime Errors         DBIF_RSQL_TABLE_UNKNOWN
ABAP Program           SAPLCLVF
Application Component CA-CL-CL
Date and Time          11.06.2014 12:08:28
Short text
     A table is unknown or does not exist.
What happened?
     Error in the ABAP Application Program
     The current ABAP program "SAPLCLVF" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Error analysis
     A table is referred to in an SAP Open SQL statement that either does not
      exist or is unknown to the ABAP Data Dictionary.
     The table involved is "AUSPN_V1" or another table accessed in the statement.
Source Code Extract
Line SourceCde
104     if dupl = kreuz.
105       insert auspc_v2 client specified from table auspcv2
106                              accepting duplicate keys.
107     else.
108       insert auspc_v2 client specified from table auspcv2.
109       if syst-subrc ne 0.
110         message a585 with tabausp.
111       endif.
112     endif.
113     refresh auspcv2.
114   endif.
115   read table auspcv3 index 1.
116   if syst-subrc = 0.
117     if dupl = kreuz.
118       insert auspc_v3 client specified from table auspcv3
119                              accepting duplicate keys.
120     else.
121       insert auspc_v3 client specified from table auspcv3.
122       if syst-subrc ne 0.
123         message a585 with tabausp.
124       endif.
125     endif.
126     refresh auspcv3.
127   endif.
128   read table auspnv1 index 1.
129   if syst-subrc = 0.
130     if dupl = kreuz.
131       insert auspn_v1 client specified from table auspnv1
132                              accepting duplicate keys.
133     else.
>>>>>       insert auspn_v1 client specified from table auspnv1.
135       if syst-subrc ne 0.
136         message a585 with tabausp.
137       endif.
138     endif.
139     refresh auspnv1.
140   endif.
141   read table auspnv2 index 1.
142   if syst-subrc = 0.
143     if dupl = kreuz.
144       insert auspn_v2 client specified from table auspnv2
145                              accepting duplicate keys.
146     else.
147       insert auspn_v2 client specified from table auspnv2.
148       if syst-subrc ne 0.
149         message a585 with tabausp.
150       endif.
151     endif.
152     refresh auspnv2.
153   endif.

Hello
Please check on transaction SE11 if this table exists and if it is active.
Also, it may be a database issue. What is your database?
BR
Caetano

Database does not exist in the specified path

Just bought a USB 6009 DAQ and for some reason I now keep getting this error: "Database does not exist in the specified path" in VI Logger 2.0.1 it was working. Can anyone help??

Jared,
It sounds like VI Logger somehow lost its association with its
database. Please open MAX and check out the "Historical
Data"->"Citadel 5 Universe" entry. Under "My Computer" in the
right-hand pane, you should have a database called "VI Logger Data". It
must be spelled, spaced, and capitalized the exact same way. If you do
not have this database (which I suspect you do not), right click on "My
Computer" and select "Create/Attach Database..." The default database
path (if you want to have access to your old data) is C:\Documents and
Settings\All Users\Application Data\National Instruments\VI Logger,
with the database name as "VI Logger Data". If you want to create a new
database, then specify a new path.
If "VI Logger Data" does appear, a possible fix is to detach and
reattach it. Right click on "VI Logger Data," select
"Detach/Delete...," and chose the "Detach" option. Finally, reattach
the database as described above.
Hope this helps,
Ryan Verret
Product Marketing Engineer
Signal Generators
National Instruments

Table /xyz/abc does not exist in the database

Hi experienced developers,
I created two transparent tables in customer name space in development system, transport to quality together with program using the tables, everything fine, no errors, no warnings.
Then transported to production. No errors, no warnings. Detailed protocol shows tables have been activated, no errors or warnings.
First try to use the program gives a dump.
line 1191:
""/xyz/abc" is not defined in the ABAP Dictionary as a table, p"
"rojection view, or database view."
Double-click on the table in program code gives a popup information message
Table/xyz/abc does not exist in the
database
After acknowleding the popup, the usual dictionary entry is shown, table is active. Utilities -> database object -> Display leads to an empty screen
Fields of /xyz/abc
Fld name Position Data Type Length Decimals Not null Default
Indexes for /xyz/abcI
Utilities -> runtime object -> Display shows the table name followed by message
There is no active runtime object for ...
prededed by big icon exclamation mark.
We created a new transport with exactly the same result.
Basis people have no idea.
The only thing special (but OK I think) is that the tables have key fields only.
Database is Oracle 11.2.0.2.0, SAP ECC 6.0
SAP_ABA     701     0008     SAPKA70108     Cross-Application Component
SAP_BASIS     701     0008     SAPKB70108     SAP Basis Component
PI_BASIS     701     0008     SAPK-70108INPIBASIS     Basis Plug-In
ST-PI     2008_1_700     0005     SAPKITLRD5     SAP Solution Tools Plug-In
SAP_BS_FND     701     0009     SAPK-70109INSAPBSFND     SAP Business Suite Foundation
SAP_BW     701     0008     SAPKW70108     SAP Business Warehouse
SAP_AP     700     0022     SAPKNA7022     SAP Application Platform
WEBCUIF     700     0009     SAPK-70009INWEBCUIF     SAP WEBCUIF 700
Yes I know, this is a DDIC forum question but I hope for more (experienced) readers here.
Thank you all for any hint leading to a solution.
Best regards
Clemens Li

Hi,
thank you for the comments although it does not help.
Here is the excerpt from productive system import protocol (original table names replaced as customer requirement)
*** Activate objects at level 1
Too low cost (2.100) for parallel processing. Minimum: 6.000
* Synchronous execution, no parallel processing *
Activate table /xyz/abcd1
Table /xyz/abcd1 was activated successfully
Activate table /xyz/abcd2
Table /xyz/abcd2 was activated successfully
Synchronous processing: 4 sec., 2 objects, 2.100 costs
      Object Activation
End phase 001 ***********************************************************
Start phase 002 **********************************************************
      Statistics on Activated and Deleted Objects
Number of objects to be activated............: 2
Objects not activated........................: 0
Activated objects with errors in dependencies: 0
Objects activated with warning...............: 0
Successfully activated objects...............: 2
Number of objects to be deleted..............: 0
Objects not successfully deleted.............: 0
Successfully deleted objects.................: 0
Tables/views with DROP/CREATE................: 0
No. of them marked for DROP/CREATE: 0
Not marked for DROP/CREATE: 0
Number of nametabs to be deleted.............: 0
Successfully deleted nametabs................: 0
Nametabs that were not successfully deleted..: 0
      Statistics on Activated and Deleted Objects
End phase 002 ***********************************************************
=========================================================================
Mass Activation
=========================================================================
Process..................: ENNIPROD_10
Return code..............: 0
Phase 001..................: 00:00:04 (Object Activation)
Phase 002..................: < 1 sec. (Statistics on Activated and ...)
Program runtime..........: 00:00:05
Date, time...............: 08.03.2012, 16:30:43
Program end==============================================================
ABAP Dictionary: Activation
End date and time : 20120308163043
Ended with return code: ===> 0 <===
Actually, I don' understand it.
Regards,
Clemens

FATAL: Database "myDB" does not exist in the system catalog.

Similar Messages

Maybe you are looking for