FB50 posting to internal order not possible.

I have another problem. We wanted to settle costs collected on internal orders to a balance sheet account. So I created a new order type, allocation structure, settle profile. But when I try to do fb50 and debit some expenses on this internal order I get a message "FI postings not allowed". Can you please help me with this.
Thanks.

Hi,
You would not have released the Order.
Once you release the order then only postings are possible.
If you have released and still you are unable to post transactions:
Then u need to check the status profile that you are using
Please award points suitably
Best Regards
Surya

Similar Messages

  • Internal order not posted, backdating

    Hello,
    When AUC is created with investment order was given as reference, but unfortunately, system configuration was given to hide the investment order, hence forth, Controlling document debiting the order didn't take place.
    The order hence forth attached with the budget didn't reduce the budget value.
    Is it possible to update the accounting document to post to internal order, without reversing the original document.
    Regards,
    Keith

    Hello
    Are  u using SAP version lower then ECC5 then you can do this by FI-CO reconcilation transaction.
    thanks
    alok

  • Posting settled internal order costs to PM Order

    Hi,
    Our client doesn't have PM module upto now. So they posted all the maintenance costs to internal orders. All the internal orders are settled properly. Now they want to implement PM module. They want the costs previously posted in internal order should be reflected in PM orders.
    How it will possible?  Any inputs please.. is the historical PM order helps???
    Regards
    Radha

    Radha,
    Technically speaking, yes its possible.
    But do you know which costs were booked against each equipment?
    Even if you do, then you will need to write an ABAP program to create PM orders and then move the costs from the settlement orders to the PM orders in the period thatg they were accrued. This is a big job.
    If you only need a record of the equipment costs (ie not move the actual costs) then the simpler approach would be to use Historical Orders.
    PeteA

  • Payroll Posting to Internal order

    Hi,
    We are  not able to do payroll posting to defined internal order for one PERNR.
    We have maintned IT 0027, IT 315 for that EMP.
    Within IT 0027 we have maintained Master cost center(default from IT 0001),Co code, Internal Order number .
    But while doing payroll posting system is not posting payroll results to defined Internal order as per IT 0027. Amount is getting posted to Cost center as per IT 0001.
    Please advice us what config/ tables need to check for proper payroll posting to Internal orders.
    Regards,
    Pradeep.

    Hello Pradeep,
    IT 0027 is for cost distribution and if you maintain correct distribution rule and correct orders there the system should post to the specific order. However, you may check the order master data to find out whether the order is released for postings and also check that the order is not statistical.
    Kind Regards // Shaubhik

  • Internal order not settling as asset is already deactivated.

    Hi friends,
    when iam trying to post KO88 internal order settlement it is giving the message that "ASSET xxxxxxxxxx is deactivated",in my settlement rule there is not that asset another asset no is there,
    where is the link for asset and IO ?
    How to see the deactivated asset?
    thanks,
    Srini.

    Hello,
    Might be your said asset number is sub asset no. which is coming in the error msg asset no.
    first check the relation between error msg asset and which asset you are going to do settelement.
    The asset deacivation button will available in the Asset master record general data.
    If helpful pls assign points,
    Rams

  • Perform Payroll Posting using Internal Order

    Hi All,
    I would like to know what configuration that must be done to ensure that during payroll posting budget checking is performed using internal order.
    I already searched in all available resources but found nothing. I read SAP Note 648594 but I still do not understand how the integration is built. Now we use cost center as cost object instead of internal order, and in the new requirement user wants to perform payroll posting to cost center and also perform budget checking via internal order.
    For your information, I tried to maintained IT0027 and entered internal order with percentage 100% but when I posted the payroll result, expenses of the employee was posted to internal order instead of cost center.
    Thank you,
    Regards,
    MAL

    You may either enter in IT27, or against the position or org unit in PPOME.
    If you entered an internal order as 100%, then the posting will of course post to the internal order.
    regards

  • Internal Order not being created in cProjects-Accounting Integration

    Dear All,
    We are working on cProjects 4.0 with ECC 6.0,
    Trying to do Accounting Integration.
    For only one Project I am able to create Internal Order,
    But I am getting following error.
    “Cost/revenue rate YP002 is not valid in organization 00000000   “
    Inspite of assigning these rates to the organization 00000000
    For other projects, when I click on accounting:
    I get following error
    "Single-Obj.Controlling on InternalOrders 0188993B3E343947A046B554FD886E03 000006000032 does not exist"          
    When I go to Controlling Cockpit, I see this Internal Order not being created.
    Have revisited all settings, project type, etc.
    How do I go about this.
    Kindly help,
    Navendu

    Dear All,
    I was able to solve the one of the problem, with the following settings,
    Assign Cost Elements & Activity Types:
    Choose Organization, Start & End Dates, Cost and Revenue Elements, Currency.
    The start and end date of the cost/ revenue did not fall within the start and end date of the Organization.
    Regards,
    Navendu Shirali

  • Posting of retirement/transfer not possible (error in the asset)

    Dear All,
    I have been trying to retire 3 assets by ABAVN. After I try to simulate the posting, it says:
    Posting of retirement/transfer not possible (error in the asset)
    Message No.465
    Diagnosis
    An inconsistency was found for the asset 10 during the last recalculate values.
    Posting was rejected,
    Choose the function recalculate values in the master data maintanance transaction, and remove any inconsistencies.
    My question is that what is the asset 10..is it the depreciation area? C's I haven't input 10 assets...only 3.
    What is the recalculate values for asset master data maintanance? Is it the depreciation or other input to the asset master?
    Thank you.
    Emma

    Hi,
    I checked AFAR and found it would re-valuate 2 assets in 1999 and 2000 for depreciation area 10 (which is the tax depreciation). In 1999, the assets are retired partially. I am checking on the values AFAR calculated and find what happened that made it necessary to re-valuate the assets.
    Thank you.
    Emma

  • Posting of retirement/transfer not possible (error in the asset) Mes: AA465

    Dear Experts,
    while doing ABUMN, i am getting the following error
    Posting of retirement/transfer not possible (error in the asset)
    Message no. AA465
    Diagnosis
    An  inconsistency was found for the asset 01  during the last recalculate values.
    System Response
    Posting is rejected.
    Procedure
    Choose the function Recalculate values in the master data maintenance transaction, and remove any inconsistencies.
    Regards,
    Venkat

    Thanks ravi,
    I run the AFAR but nothing is visible in test run.
    I am defined the cut off key(5%) and assigned in to the dep key.
    we run the depreciation for the last 5 months. some of the assets fully depreciated before lagacy data upload. in AW01N those assets showing the error message. Now that asset(fully depreciated asset) is transfer to another business area. then it showing that:
    Posting is rejected.
    Procedure
    Choose the function Recalculate values in the master data maintenance transaction, and remove any inconsistencies.
    Run the depreciation in AFAR means. in which period i can run.
    Thanks
    Venkat

  • Internal Order not allowed for revenue posting

    Hello all,
    I have a problem, while doing migo for subcontracting materials(movement type 105) following error has occurred:
    Message no. KO014:Order 5000012 cannot carry revenues
    Steps i have followed:
    Step-1: In transaction MB1B materials are transferred to stock with subcontractor with movement type -541(Transfer posting to stock with subcontractor from unrestricted.-use stock) and with reference to scheduling agreement number. (A material document is generated).
    Step-2: Creation of Subcontracting Challan through T-code-J1IF01 with reference to material document generated in step-1 above.
    Step-3:  Goods receipt through T-Code-MIGO with movement type 103(Goods receipt for purchase order into GR blocked stock) with reference to scheduling agreement number mentioned above. (A material document number is generated)
    Step-4: Release of GR blocked through T-Code-MIGO with movement type 105(GR from blocked stock) and with reference to material document generated in step-3 above.
    When the material document is checked, system does not give any error but at the time of posting the same system displays the following message:
    Order 5000012 cannot carry revenues
    The above order is an internal order and is assigned to Stock Change Account (a primary cost element) in OKB9 (Default account assignment).

    Hi
    Go to T.code KO02 and check in the Control data tab if your Internal Order is blocked for Revenue Posting or not.
    Regards
    Hari

  • Revenue Posting to Internal Order (through VA01)

    Is it possible to post the revenue to an internal order using VA01 (rel. 4.7 level 27).
    Thanks
    Karla

    Hi,
    As per your query you can do the same but in case you have not reced the purchase order quantity then you have to go for make reverse entry to correct this.
    I will suggest you, do not configure this type of setting othewise you will never know the the difference value of your po and actual payment.
    Anil

  • Third Party Order - Not possible to determine a consumption account

    Hi All,
    I know there are a number of threads on this subject but the answer for me doesn't seem to be here.
    The scenario I am trying to configure is around buying and selling software licenses using a Third Party Sales Order process (Item Cat TAS).
    My material is set up as a DIEN with and Account Assignment Group of BANS and a Valuation Class of 3200 (service). I'm assuming that as the license key is a notional concept rather than a physical stocked item as such - a service is the more appropriate material type but maybe I'm wrong?
    I have entered two entries using transaction OBYC (Maintain FI Configuration: Automatic Posting - Accounts) for Transaction Key GBB:
    i) General Modification = blank
    ii) General Modification = 'AUF'
    ... but this made no difference.
    Can anyone advise how to resolve this issue please?
    As an aside I am not sure how you ever know what entries are required in this table - how can you tell what General Modification values are relevant to any given scenario?

    Hi Raja - yes this was useful but I am still having difficulties.
    OK - So I can see from your notes that the Account Modifier that I was looking for was VAX associated with the Account Assigment Group of 'X' - good so I fixed the  OBYC - GBB table to ensure I has a VAX - 3200 entry for consumption and it worked - great! BUT ...
    I then wanted to get it so that my PO would create automatically so I:
    i) Set the Auto PO on the Item Category
    ii) Set the ALE paramenters asociated with the Sales Org definition
    iii) Set the Auto PO on the Vendor Master
    but that didn't work
    I wanted to set the AUTO PO on the material master but as my MM was a DIEN this option was not available to me so I created another material that was NLAG (non-stocked) and tried again - this time I marked the Auto PO on material as well but it still didn't work because I am now geti8ng the message "Not possible to determine a consumption account" - Aaaarrrggghhhhh!!!
    Everything else remains unchanged - BANS - CS etc.
    Any ideas?

  • Recurring posting with Internal Order

    Dear Team,
    I want to create a service purchase order for 1 year and down payment is made for entire amount. How can i monthly book the expenses automatically. I need to post a service entry sheet and invoice automatically for every month. is it possible through internal order.
    Regards
    Rajesh Kumar

    Thanks but it will help in automatic posting of service entry,invoice every month.
    regards
    rajesh

  • Foreign currency posting to Internal order and settlement

    Hi All,
    The payment posted to an internal order was in a foreign currency then translated into usd.  The settlement used a different exchange rate so in usd there was a balance.
    How do we rectify this..?
    Regards
    Ashok PRabhu

    Hi
    I am not sure how IS-H works.. But for sure, it should allow you to enter 3 stat objects...
    There would be some ABAP trick pertaining to IS-H which I am not aware of...
    I can guide you a bit...  During SD billing, ask abaper to put a break point and manually enter the values for cost center and IO and then post the doc.... One of these 2 will be the outcomes
    a. Either it will get posted or
    b. It will get over written before posting....
    based on the outcome, you will have to decide your next course of action
    Also, if your cost center to IO is one to one mapping (Chances would be rare), you can simply write a substitution which would always prevail
    I am sorry I could not offer you a complete solution.. But, this is what comes to my mind...
    Regards
    Ajay M

  • Posting to Internal order

    Hi,
    I am trying to post transaction in f-02 for internal orders i created. But it's giving a message that " Cost/Profit center XXXXXXXX is not valid for Account XXXXXXX ( This is my Cost Element ) in FI ". Could some one help me out
    thanks for a early reply

    Hi,
    Looks like a custom message. Check if there is any validation defined in transaction OB28 with this message. If yes, do as per the prerequisite defined for that step.
    Hope this helps.

Maybe you are looking for