Check/Validate Line item Amount against Credit Balance of Customer in FBL5N

Hi ,
I need to Check/Validate Line item Amount BSEG -WRBTR (Screen 301, Prg. SAPMF05A ) in F-02 against Credit Balance of Customer in FBL5N.If amount entered in F-02 with posting key 01 and same company code is greater than total credit balance with customer ,then i need to pop up error message.
I have tried this with GGB0 using my own exit incl & including ZRGGBR000 in neccesay customization.Still not working.
Pls suggest a solutiion for this
Regds,
abhee
Edited by: abheesawant on Jul 29, 2010 6:59 AM

HI,
To trigger user exit form pool (ZRGGBR000) you need to do setting in OB28 and activate it.
Regards,
Sri

Similar Messages

Withholding tax amount exceeds the customer/vendor line item amount

Hi experts
I am having one problem please help me
My user created one down payment, entry is like this
Vendor Dr-193914
To TDS 3878
To Bank 190036
After this he has booked MIRO with the same value 193914 & has deducted TDS 3878 over that invoice
Now when he is going to adjjust that down payment against that MIRO with specific line item 62
system is throwing that error.
Withholding tax amount exceeds the customer/vendor line item amount 002
Message no. 7Q321
I checked invoice booked correctly & TDS also dedcuted properly why system is throwing that error message
please help me
Regards
Nitin Shukla

Hi Madhu
thanks a lot for instant reply
We are using F-54 Down Payment adjustment at this time we are facing problem & we are clearing against invoice
& with specific line item
For Eg. 5100001596 & line item - 53
Regards
Nitin Shukla

Vendor open line item amount payment in app through different house banks

Hi,
Kindly Help me.
Our client requirment is vendor open line item amount payment in app through using different house banks is it possible.
Please let me known
Thanks & Regards
Ramu

Hi
Generally , you can assign a default house bank and account id in the vendor master record. During execution of Automatc payment program this house bank will be used ( provided your APP configuration via FBZP and APP parameters are in line ). However, you can change the default house bank at the document line item level to a different house bank and this would be checked with house bank configuration via FBZP ( and your APP parameters ) and payment made via the preferred house bank .
You may also change the house bank while editing the Automatic payment proposal through a re-allocation of house bank .
Hope this helps.
Regards
VidhyaDhar

Change of line item amount in miro

hi,
i have a doubt on the change of line item amount field value at PO reference tab in MIRO.
1) when vendor invoice price higher than PO, although knowing that the price is incorrectly quoted by vendor, we need to change the amount in PO reference tab line item according to invoice?
2) the difference in point 1 will hit stock account (map) or price difference.
3) when vendor later on give CN, we need to do subsequent credit.
4) in subsequent credit, need to create with reference to PO.
5) we need to change the amount at PO reference item line according to CN?
thanks

Hi,
1) when vendor invoice price higher than PO, although knowing that the price is incorrectly quoted by vendor, we need to change the amount in PO reference tab line item according to invoice? --- Yes you have to change it to Vemdor invoice amount
2) the difference in point 1 will hit stock account (map) or price difference. --- Yes
3) when vendor later on give CN, we need to do subsequent credit. -
Yes with ref to PO
4) in subsequent credit, need to create with reference to PO. -
Yes
5) we need to change the amount at PO reference item line according to CN? -- yes.
Other Option
You can use invoice reduction - System will create Inoice and credit memo in the same document.
SPRO Steeting require :
1. G/L account should be assigned to RKA trnsaction ket in OBYC.
2. Document type KG should be defined in Transaction code MIRO in customizing for doucment type invoice verification / Valuation in SPRO.
3. Number range should be defined for Doc type KG.
Regards,
Shailesh Mackwan

Withholding tax amount exceeds total bank line item amounts

Dear Sir,
While I am trying to make down payment to the WHT vendor I have found the above error. Can anybody help. I am not giving any base amount in WHT information while down payment. It is picking automatically tax code P9. I am trying to post the down payment 10000/- and P9 tax code amount is 2.266%.
BSR

HI,
If the Error is 7Q 320 'Withholding tax amount exceeds total bank line item amounts'
then follow
Kindly check in the relevant bank GL account master whether you have
activated the field "relevant to cash flow" in the create/bank/interest
tab in the GL account master FS02. Also refer the SAP Note 198368.
Reg
Madhu M

With holding tax amount exceeds the cutomer/vendor line item amount 001

Hi Guru's,
I have an issue, is there any impact to change the withholding tax base amount 20% instead of 10%.When I change the base amount to 20% and post a document system return error message
"With holding tax amount exceeds the cutomer/vendor line item amount 001".Guide me on this issue.
And tell me the impact of previous open item documents.
Regards
Maruthi.

Thanks for all,
MY problem solved.
Regards
Maruthi

Withholding tax amount exceeds the customer/vendor line item amount 001

Hi Guys,
I am trying to release an invoice using VF02 transaction but I recieved the below error message:
Message no. 7Q321
Withholding tax amount exceeds the customer/vendor line item amount 001
There are 2 SAP (718078 and 513201) notes regarding that but they are not applicable in ECC 6.0.
How can I figure out this issue?
Thanks,
Daniel Dorta

Hi,
This may happen because you have give base exemption and after that charge tax. In this case you have posted earlier invoice w/o wht and now you are posting the small amount of invoice on which wht is calculated including the earlier exempt amt. In this case the wht exceeds the base amt.
In this case if possible you first post the invoice with sufficient amount which can deduct the WHT .
If your scenario is different give details.
Regards
Milind Sonalkar

Wht tax amount exceeds the customer/vendor line item amount 001Mess no7Q321

Dear Experts,
We are also getting same error in production"Withholding tax amount exceeds the customer/vendor line item amount 001 Message no. 7Q321"
Please gudie me how to resolve this issue, while posting vendor invoice in T-code - F-43 i am getting bellow error message why because we client requirement is accumulation activity required so is there any solution for this with out changing accumulation activity.
We need to use this accumulation activity.
I would be greatful if you could help us to resolve this issue.
thanks
Seshu

If its relating to TRM- Transaction manager, please implement note no " 1961340 - Calculation of withholding tax for 2nd or 3rd local currency "
Regards
Anil

How to check plan line items for plan cost at network activity level?

Dear all,
How to check plan line items for plan cost at network activity level? The plan cost is done in network activity in CJ20N.
I am not able to check using CJI4 or CJI9 report.
Kindly advise.
Thanks and regards,
Jessie

Hi Jess,
Have you checked the navigation part which is being displayed on left hand side of report S_ALR_87013565 and S_ALR_87013533.? There you have option to check transaction currency and object currency when you double click on it.
In case if it is not being displayed under navigation. Then you can bring them on from transaction code CJE2. For eg: Report group for S_ALR_87013533 is 12KST1C. Double click on it and it will open up to do changes in report layout and many more. There you also have options to bring on transaction currency too. Similarly, you can check for other report groups as well just by checking the report description.
But I am not sure if suits your requirements. Wait for other experts to comment on this.
Regards,
Amit

F-48 - Withholding tax amount exceeds total bank line item amounts.

Dear all
In F-48 i am getting following error msg,
Withholding tax amount exceeds total bank line item amounts.
Message no. 7Q320
All Config settings or ok.
Kindly suggest with suitable solution.
With thanks
Jai

Dear,
Select Relevant to cash flow field for Bank GL you are using for making down payment.
Regards,
Chintan Joshi
Edited by: Chintan Joshi on Jan 21, 2010 10:21 AM

FBCJ check withdrawal line item

I have a problem in fbcj
I have posted check receipt entry in fbcj check receipts tab successfully.
while present check it was not generated ceck withdrawel line item and lot status is check withdrawal line item saved.
I have to change this status.
is there any solution to change this otherwise any other procedure.

HI,
To trigger user exit form pool (ZRGGBR000) you need to do setting in OB28 and activate it.
Regards,
Sri

Line item disapperaed in F-32 but appeared in FBL5N.

When we are trying to clear the open line item via F-32 for a customer where we are not able to see the all the open line item which are displayed in FBL5N, need help to fix this issue.
Thanks a lot in advance.

Hi Rajesh,
Please enter the special GL indicator in selection screen of F-32, those used while posting of those customer open items.
If you have multiple spl gl indicators, combine them and enter there.
Thanks,
Srinu

Is Credit Check Per Line Item in Sales Order Possible?

Dear All,
Hope you all are doing well !!!
Infact i am currently implementing OPM and SCM modules for a CSD (carbonated soft drinks) industry. They have a specific requirement on Credit Management. Please look at the Requirement Below.
Credit Management Per Line on SO
Client Charges Distributors for both Liquids (Finished Product) + [Return Glass Bottles and Shells) for the First Time.
Subsequently while returning RGB(Return Glass Bottles)'s and Shell's are being given Credit memos.
CBL gives credit only on Bottles & shells but not on Liquids.
For Liquids CBL takes the Prepayment & Its Compulsory.
So the Credit limit needs to be check on the bottles and shells only.
Oracle E-Business Suite Credit Management does not work per line item for a
Particular Sales Order. It works on total Sales Order. as this is not a standard Process in Oracle how we can achieve this without customization.
Please suggest me through any workaround we can achieve this and its a show stopper for us and business critical for my client.Please help me on this regard.
Thanks & Regards,
Aditya

I'd suggest writing your own might be easier. Oracle buckets the exposure as per the list below whereas you are probably only interested in seeing a total order exposure (by line item for bottles/shells) and total AR exposure summary.
Also the standard report will look at the unit sell * the ordered quantity in calculating transaction amounts on open orders which is your problem. If I've understood your requirement correctly, you only want to consider the shells and bottles in the credit check because you enforce prepayment for liquids so presumably your AR o/s balances are only for money owing on shells and bottles.
In that case, your only real issue is at the order entry stage (again because Oracle will be considering the total transaction value if you're using the standard automated credit check) which is why I suggested the manual workaround there.
1     Header uninvoiced orders
2     Header uninvoiced orders tax
3     Line uninvoiced orders
4     Line uninvoiced orders tax
5     Line uninvoiced freight
6     Header uninvoiced freight
7     Header and line freight
8     Invoices
9     Payments at risk
10     Order holds
11     Line holds
13     Order tax holds
14     Line tax holds
15     Order freight holds
16     Line freight holds
17     Header and line freight holds
18     External exposure
21     G_BR_INVOICES
22     G_BR_PAYMENTS_AT_RISK
23     G_HEAD_RETURN_UNINV_ORDERS
24     G_LINE_RETURN_UNINV_ORDERS
25     G_ORDER_RETURN_HOLDS
30     G_ORDER_RETURN_HOLDS
31     G_LINE_RETURN_HOLDS

Credit Check Per Line Item in Sales Order is Possible?

Dear All,
Hope you all are doing well !!!
Infact i am currently implementing OPM and SCM modules for a CSD (carbonated soft drinks) industry. They have a specific requirement on Credit Management. Please look at the Requirement Below.
Credit Management Per Line on SO
Client Charges Distributors for both Liquids (Finished Product) + [Return Glass Bottles and Shells) for the First Time.
Subsequently while returning RGB(Return Glass Bottles)'s and Shell's are being given Credit memos.
CBL gives credit only on Bottles & shells but not on Liquids.
For Liquids CBL takes the Prepayment & Its Compulsory.
So the Credit limit needs to be check on the bottles and shells only.
Oracle E-Business Suite Credit Management does not work per line item for a
Particular Sales Order. It works on total Sales Order. as this is not a standard Process in Oracle how we can achieve this without customization.
Please suggest me through any workaround we can achieve this and its a show stopper for us and business critical for my client.Please help me on this regard.
Thanks & Regards,
Aditya

I'd suggest writing your own might be easier. Oracle buckets the exposure as per the list below whereas you are probably only interested in seeing a total order exposure (by line item for bottles/shells) and total AR exposure summary.
Also the standard report will look at the unit sell * the ordered quantity in calculating transaction amounts on open orders which is your problem. If I've understood your requirement correctly, you only want to consider the shells and bottles in the credit check because you enforce prepayment for liquids so presumably your AR o/s balances are only for money owing on shells and bottles.
In that case, your only real issue is at the order entry stage (again because Oracle will be considering the total transaction value if you're using the standard automated credit check) which is why I suggested the manual workaround there.
1     Header uninvoiced orders
2     Header uninvoiced orders tax
3     Line uninvoiced orders
4     Line uninvoiced orders tax
5     Line uninvoiced freight
6     Header uninvoiced freight
7     Header and line freight
8     Invoices
9     Payments at risk
10     Order holds
11     Line holds
13     Order tax holds
14     Line tax holds
15     Order freight holds
16     Line freight holds
17     Header and line freight holds
18     External exposure
21     G_BR_INVOICES
22     G_BR_PAYMENTS_AT_RISK
23     G_HEAD_RETURN_UNINV_ORDERS
24     G_LINE_RETURN_UNINV_ORDERS
25     G_ORDER_RETURN_HOLDS
30     G_ORDER_RETURN_HOLDS
31     G_LINE_RETURN_HOLDS

Credit Check at Line Item Level

We are trying to carry out credit checking at the line item level. So that user can release each line item from VKM1 or VKM3. Need to know how to achive this does any boday know any enhancements or notes we can apply to achieve this as Standard SD only has credit checking at the document level.

Hi,
This is a requirement user wants each line item should be released by VKM1 and VKM3.
I am looking for any user exit or enhancement which does this
Thanks
Krushnakumar

Check/Validate Line item Amount against Credit Balance of Customer in FBL5N

Similar Messages

Maybe you are looking for