FCC - Problem with occurence

Hi well i will have to transform data via FCC. The recieving data e.g. DT_Test has an element with occurence 0..1. because of '0' there is the possibilty that this element will be left blank, so nothing will be transferred.
in FCC on receiver side i have to give the parameter '.fieldFixedLengths' and i am not able to say XI: " Well if the field is blank, don't use the value given in fieldFixedLengths!
br Jens

Hi Jens,
you can solve that as well with XSLT and an if-condition on string lenght of source field:
<xsl:if test="//string-length(//myField) != 0"><fieldFixedLengths...
Regards,
Udo

Similar Messages

FCC - Problem with Occurence of values

Hi well i will have to transform data via FCC. The recieving data e.g. DT_Test has an element with occurence 0..1. because of '0' there is the possibilty that this element will be left blank, so nothing will be transferred.
in FCC on receiver side i have to give the parameter '.fieldFixedLengths' and i am not able to say XI: " Well if the field is blank, don't use the value given in fieldFixedLengths!
br Jens

Hi,
May be you can use "Exists" node function in the mapping program.
Hope this helps.
-Prasad Babu.

Sender FCC , problem with Repeating Field under a Sub-structure

Hi,
I have an Input File as
D,TH_ ,10/31/2008,ABC,pieces
PF, 10/31/2008,11/2/2008,11/3/2008,11/4/2008
P,mat,CS,100,120,130,125,150,170,120
P,mat,CS,100,120,100,110,140,120,110
I need to Implement an FCC to convert this to
a Structure like this
Recorset
    Header           1....1
        Unique Id
        date Time
        CustomerCode
        Code
        Unit
    Dates         1
     date          1....n
    Products       1....n
      product      1
      unit         1
      quantity     1.....n
This this is a Variable recordset type ( i.e each ROW has a Different Structure) the following keys D,PF,P are defined, for the header, dates, and Product Information.
The Following FCC parameters are applied
Document Name : MT_FILE_INPUt
Document NameSpace = http://xyz.com
Recordset Name = "Recordset"
Recordset structure = Header,1,Dates,1,Products,*
keyname              = Key
Keytype               = String
Header.FieldSeprator = ,
Header.FieldName = Unique Id,date Time,CustomerCode,Code,unit
Header.keyValue = 'H'
Dates.FieldSeprator = ,
Dates.Fieldname   = 'date'
Date.keyValue    = 'PF'
Products.FieldSeprator = ,
Product.FieldName = product,unit,quantity
Product.KeyValue = 'P'
Now the Problem is as Follows:
1) I have a Repeating Field Quantity under the Product and Date under the Dates Sub-structure, This is not getting Repeated at all.
Is there a Way to achieve the same
2) Another Point is That, i do not want to take the key Value in the XML structure after converion, is there a way to avoid it
Please let me know if any blogs are available
Any help would be appreciated.
Thanks,
Best Regards
Abhishek

can u try.. i haven't tired this.
quantity is occuring multiple times, but if that is fixed no# of occurance,, you can can try with this?
P,mat,CS,100,120,130,125,150,170,120
Product.FieldName = product,unit,quantity,quantity,quantity,quantity,quantity,quantity
let me try ..
As long as the quanitfy defined under Product.FieldName are more than the input msg quantity values (100,120..), you will be safe...
Edited by: Anand on Oct 31, 2008 3:54 PM

FCC: Problems with content conversion

Dear all,
I have a receiver FTP adapter with content conversion. In RWB I'm facing following error message:
Adapter Framework caught exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'java.lang.Exception: Consistency error: more fields found in XML structure than specified in conversion parameters! (Value 'FCOTUPI')', probably configuration error in file adapter (XML parser error)'
The field with value FCOTUPI could be found in POS recordset. I double check the length of columns but couldn't find
an error.
CC configuration:
Recordset structure: HEADER,POS,SUBPOS
HEADER.fieldFixedLengths = 8,4,8
POS.fieldFixedLengths = 8,20,15,3
SUBPOS.fieldFixedLengths = 5,5
HEADER.fixedLengthTooShortHandling = Cut
POS.fixedLengthTooShortHandling = Cut
SUBPOS.fixedLengthTooShortHandling = Cut
As you can see by the names, I am using as XML to convert a structure with subnodes. In documentation it said
that it is not allowed, but in some threads I found the information that structure could be processed.
Any ideas how to solve this problem?
Thanks
Chris

Dear Amit,
thanks for your answer. I already checked this blog, but hoped for other solutions.
My problem: I tried to map my hierarchical structure to a flat structure.
Source
Struc1 (0..unbounded)
-Item1.1
-Struc2 (0..unbounded)
--Item 2.1
--Struc3 (0..unbounded)
---Item3.1
Target:
Struc1 (0..unbounded)
-Item1.1
Struc2 (0..unbounded)
-Item 2.1
Struc3 (0..unbounded)
-Item3.1
But if e.g. the Struc2 appears two time it will be created two time in target structure before
the Struc3 is created. But ths Struc3 belongs to Struc2 and should be created in flat file under
Struc2 directly.
How can we created a flat structure like this
Struc1
Struc2
Struc3
Struc3
Struc2
Struc3
Thanks
Chris

Problem with several occurence of same ToolTip

For a test form, I am using Dreamweaver CS4 Spry Tooltip Widgets. In this form, I need to have several occurence of a same Tooltip. All works fine. But there is a problem with the W3C validator, which returns the error: id "sprytrigger2" already defined. Any help to help me on that
problem is welcome. Many thanks.
Part of the HTML code (below)
<img src="button.gif" ... id="sprytrigger1">
<img src="button.gif" ... id="sprytrigger2">
<img src="button.gif" ... id="sprytrigger2">
<div class="tooltipContent" id="sprytooltip1">--- GOOD---</div>
<div class="tooltipContent" id="sprytooltip2">--- You are Wrong ---</div>
<script type="text/javascript">

</script>
W3C Validator Error code returned:
id "sprytrigger2" already defined
An "id" is a unique identifier. Each time this attribute is used in a document it must have a different value. If you are using this
attribute as a hook for style sheets it may be more appropriate to use classes (which group elements) than id (which are used to identify
exactly one element).

If you are using true ToolTips, you have a different location for each on your page.
I would not personally worry about the additional variables adding much to your code.
But if you are concerned, and the messages are really all the same, you could do a show/hide and use an absolute positioning:
.ivorycrunch_pu
     position:absolute;
     border: #5b0085 2px solid;
     right: 50px;
     top: 50px;
     width:300px;
     height:300px;
     z-index:1000;
     visibility: hidden;
This particular one is set up to show a background image...a different one for each item (coded in a separate rule)...
<div class="ivorycrunch_pu">
     <h5><a onclick="MM_showHideLayers('ivorycrunch_pu','','hide')">close</a></h5>
</div>
But if you changed this to class="Okay" and altered the style to suit, remembering to make an item with an id of 'Okay' somewhere on your page, this should work, too. Play around with it. I did not customize this for your purpose. Note that I have a 'close' text link. You would put your text in this div, not necessarily as a link, but you would need a link to close it. I think you will need to add this as a behavior, so you get the appropriate javascript on your page.
I didn't work with this long enough to suit your uses, but you should be able to jimmie around with it to make it work. Because the position is set in relation to the div of the 'trigger' text, you might need to have each 'trigger' in its own div.
Personally, I would go the ToolTip route and let Dreamweaver do my positioning for me.
Beth
You might create one ToolTip and then set it up to use a class instead of an ID. Don't know if that would work. B

Problem with File Content Conversion

Hi All
I am facing a problem with file content conversion.
This is my sample file structure:
Header_Record (Occurance - 1)
Field1 in Header
Field2 in Header
Item(Occ-1 to n)
Field3 in Item
Field4 in Item
<<ItemType>> (Structure in Item) (Occ - 0 to n)
<<Field5>> in ItemType
<<Field6>> in ItemType
<<ItemTypeCategory>> (Structure in ItemType)(Occ - 0 to n)
<<<<Field7>>>> in ItemTypeCategory
<<<<Field8>>>> in ItemTypeCategory
Footer_Record (Occurance-1)
Field9
Field10
There is a key field 'Type' in all the above records with unique value in each record.
Now, I defined Field content conversion as follows:
Recordset Structure: Header_Record,1,Item, * , ItemType, * ,ItemTypeCategory, * ,Footer_Record,1
Recordset Sequence: Ascending
KeyField Name: Type
Following are parameters defiled:
Header_Record.Keyfieldvalue: 00
Header_Record.fieldseperator: ,
Header_Record.fieldnames: Field1,Field2
Header_Record.endseperator: 'nl'
Item.keyfieldvalue: 05
item.fieldseperator: ,
item.fieldfieldnames: field3,field4
item.endseperator: 'nl'
ItemType.keyfieldvalue: 10
itemType.fieldseperator: ,
itemType.fieldfieldnames: field5,field6
itemType.endseperator: 'nl'
ItemTypecategory.keyfieldvalue: 15
itemTypecategory.fieldseperator: ,
itemTypecategory.fieldfieldnames: field7,field8
itemTypecategory.endseperator: 'nl'
Footer.keyfieldvalue: 20
Footer.fieldseperator: ,
Footer.fieldfieldnames: field5,field6
Footer.endseperator: 'nl'
Now, i pass the following file:
00,111
05,222
10,333
15,444
20,555
What i expect out of my FCC is this (Sample output to show the hierarchy of field values):
00,111
05,222
<<10,333>>
<<<<15,444>>>>
20,555
But, I am getting this output (Hierarchy is missing. All the structures are in the same order without hierarchy):
00,111
05,222
10,333
15,444
20,555
Field values are being identified according to field content conversion, but, the hierarchy of the fields is missing.
Can you please tell me how should i change my FCC config?
Sorry for this long question.
Many Thanks
Chandra
Edited by: Chandra Sekhar H on Jan 30, 2009 7:10 PM
Edited by: Chandra Sekhar H on Jan 30, 2009 7:16 PM
Edited by: Chandra Sekhar H on Jan 30, 2009 7:17 PM

You will always get a flat structure from FCC. If you want hierarchichal strucuture, you have to create a target and map. You will get only like -
Root
--Recordset
Group1
Fields
Grop2
Fields
Group3
Fields
VJ

Problems with mapping after bundling messages into one XML-file

Hi all,
Case 1: one DebMas IDoc ==> XI ==> one XML-file : no problems with mapping.
Case 2: several DebMas IDoc's ==> XI ==> one XML-file : problems with mapping.
Explanation:
Incoming DebMas IDoc's:
Businesspartner 1 : no Customer Master Partner Functions (E1KNVPM).
Businesspartner 2 : Customer Master Partner Functions (E1KNVPM).
Businesspartner 3 : Customer Master Partner Functions (E1KNVPM).
Businesspartner 4 : Customer Master Partner Functions (E1KNVPM).
After bundling into one XML-file:
Businesspartner 1 : no Customer Master Partner Functions (E1KNVPM).
Businesspartner 2 : no Customer Master Partner Functions (E1KNVPM) !!!!
Businesspartner 3 : Customer Master Partner Functions of Bp 2 (E1KNVPM) !!!!.
Businesspartner 4 : Customer Master Partner Functions of Bp 3 (E1KNVPM) !!!!.
All the payloads of the IDoc's are correct.
In the message mapping we use a Container for the Partner Functions (shown as below)
Is this a serious bug in the mapping of SAP XI ?
Does anyone knows how to solve this serious problem.
E1KNVVM -
> Partner_Container
E1KNVPM -
> Partner
PARVW -
> ParnerRole
KUNN2 -
> PartnerNumber
Regards,
Theo Pijlman

Hi,
Example:
Input idoc has field F1 with occurence 0..unbnd
My input values for field F1 is
1
none
2
3
Say, I have a mapping, F1---->TargetF1
In the target only 3 TargetF1s will be created for the values 1,2,3 and nothing will be created for the field F1 with no value.
To overcome this, use collapse contexts.
F1->collapsecontexts>TargetF1
This way, the TargetF1 fields created will have the following values:
1
blank
2
3
Collapse contexts makes sure that a target is created, even if there is a context change specified at the source.
Hope this is clear.
Regards,
Smitha.

Problem with hissing noise of earphone on nokia e5...

I have a new brand of E50 but It's a problem with quality of sound on the earphone speaker.During the calls I hear the hissing
noise.Is it problem of this model or my headset is defect?

Hey. Really sorry for late answer. i got same model (but i7 , r7 m265 )
For the fan noise ; check out gpu and cpu temperatures . clean the fan dust with power manager program. and update drivers.
for the battery , %1 wear is nothing . only affects 1-2 mins . battery has internal smbus battery fuel gauge and it automatically calibrates battery full charge capacity. but you can manual calibrate fcc with power manager. we are very lucky because on some hp ,samsung etc laptops , battery comes with %10 wearage (like my old laptop).
you post this message 6 months ago. if your battery wear is >%15 now , send battery to service. they will replace a new battery. if battery wear <%10 , your battery is normal

Problem with Idoc Mapping

Hi,
Target field is : Bank Address 1:
Source mapping: it is a Idoc with the following requirements
IF E1IDB02 BA-FIIKWAER = CNY and LEN(E1IDB02 BB-FIIBKNAM)<=11
      then MID(E1IDB02 BB-FIIBKNAM,2,10)
IF E1IDB02 BA-FIIKWAER = CNY and LEN(E1IDB02 BB-FIIBKNAM)>11
       then MID(E1IDB02 BB-FIIBKNAM,12,11)
IF E1IDB02 BA-FIIKWAER <> CNY and LEN(E1IDB02 BB-FIIBKNAM)<=35
        then MID(E1IDB02 BB-STRAS,1,35)
IF E1IDB02 BA-FIIKWAER <> CNY and LEN(E1IDB02 BB-FIIBKNAM)>35
       then MID(E1IDB02 BB-FIIBKNAM,36,35)
E1IDB02 -- is a segment name with occurence 1..1
BA and BB are the qualifiers
FIIBKNAM is the field name.
I am unable to map this as the condition has to be given with two qualifiers at a time.
Can some one help me out on this. Can we define the UDF where we can store this information as temporary variable. If UDF can be defined, please let me know with the details.
Regards,
Manoj

HI,
Yes, but you have to write your own UDF ,
but i can give example use this to solve your problem.
IF E1IDB02 BA-FIIKWAER = CNY
then MID(E1EDKA1 BE-NAME1,12,11)
1)
input E1EDKA1 BE-NAME1,E1IDB02 BA-FIIKWAER
if (E1IDB02 BA-FIIKWAER = CNY) {
return substring(E1EDKA1 BE-NAME1,12,11);
2)
input E1EDKA1 BE-NAME1,E1IDB02 BA-FIIKWAER
IF (E1IDB02 BA-FIIKWAER <> CNY ) && ( (E1EDKA1 BE-NAME1).length<=35)
return substring(E1EDKA1 BE-STRAS,1,35);
3)
IF (E1IDB02 BA-FIIKWAER <> CNY) && ((E1EDKA1 BE-NAME1).length>35)
return substring(E1EDKA1 BE-NAME1,36,35);
Before map this first map with same level of empty constant and concat it, if it is empty,later map with substring.
Regards
Chilla

Numerous problems with X1 platform and error message RDK-03032

Daily I have problem with the X1 system where the TV signal goes out and I get a message that says " Call 1-800-XFINITY and reference RDK-03032." This problem is randum and can occur at any time of day, resulting in outages for many hours, or usually the remainder of the day. If I call Comcast customer service, usually the wait is usually about 20 minutes before someone comes on and goes through another process of sending signals to my box, at which time they say they need to send a technician out. I then get a call from the technician who says he doesn't need to come out because the problem is with XFINITY's network, and that they are working on it. If I call back into customer service, I need to first make sure I have about an hour for the process because the customer support person has to go through the same diagnostic test of sending signals to confirm the system is down, before they will refer the problem back to a technician in the field. Usually during this diagnostic process, the technician puts me on hold for another 30 minutes, at which time the phone is hung up, at which time I have to start the process all over again. RDK-03032 problem continues to occur with no resolution and no one seems to be able to tell me what the problem is, or how to fix it, and no one in customer support knows how to fix this problem. I have no idea how to get this problem resolved. Does anyone have any idea?

awsomely sad / they put this item on the market and i would recomemmend you contact the fcc for a form to fill out a complaint asap as i will be doing as soon as i receive the letter in the mail , they say it is a latency problem . late is late but no show at all for hours on end is the new future. what is that suppossed to keep us victoms happy untill they can figure out what to do to cover theyre mistakes , now they are trying to replace the incoming signal which has left me with no services 10 times in 14 days , i watched a tech install a new cable from pole to house with 2 supervisors standing rigth there , when the 12th visit by a tech i explained my story and the tech said let me look out side 1 hour later after my services were cut off again the tech came to my door and told me the cable from my house to the pole was terrible and rotten and needed to be replaced again , i knew he was lying but it was after 7 pm and i had enough , i saw them a week or so before , as did the 2 supervisors , cut a brand new peice of the roll in his truck replace it with new ends , a totally new peice , so i guess the cable they are using only has a 2 week life expectancy or the tech was lying , which i beleive the tech wanted to get paid for the call , so he probably did but once again my xi service is not right still , when they get to far in they start lying because they are probably getting screwed for have to service this x1 numerous times , when i sit here and listen to the supervisors and techs tell me that the system is the problem and they are trying every 3 months to figure what the last program upgrade has screwed up for them and laugh jokingly it doesent give you to much faith in theyre ability to resolve any issues with this system face it we have no recoarse . over 200 hrs on the phone . i must have talked to every employee in the company even tom karinshank yhe ceo was contacted and after his rep sat there and picked appart evry thing i said got rude and now wont return my calls or emails they pass it to the next person , ????????????????????????????????????

Form-based authentication problem with weblogic

Hi Everyone,
The following problem related to form-based authentication
was posted one week ago and no reponse. Can someone give it
a shot? One more thing is added here. When I try it on J2EE
server and do the same thing, I didn't encounter this error
message, and I am redirected to the homeage.
Thanks.
-John
I am using weblogic5.1 and RDBMSRealm as the security realm. I am having the following problem with the form-based authentication login mechanism. Does anyone have an idea what the problem is and how to solve it?
When I login my application and logout as normal procedure, it is OK. But if I login and use the browser's BACK button to back the login page and try to login as a new user, I got the following error message,
"Form based authentication failed. Could not find session."
When I check the LOG file, it gives me the following message,
"Form based authentication failed. One of the following reasons could cause it: HTTP sessions are disabled. An old session ID was stored in the browser."
Normally, if you login and want to relogin without logout first, it supposes to direct you to the existing user session. But I don't understand why it gave me this error. I also checked my property file, it appears that the HTTP sessions are enabled as follows,
weblogic.httpd.session.enable=true

Hi...
Hehe... I actually did implement the way you implement it. My login.jsp actually checks if the user is authenticated. If yes, then it will forward it to the home page. On the other hand, I used ServletAuthentication to solve the problem mentioned by Cameron where Form Authentication Failed usually occurs for the first login attempt. I'm also getting this error occasionally. Using ServletAuthentication totally eliminates the occurence of this problem.
I'm not using j_security_check anymore. ServletAuthentication does all the works. It also uses RDBMSRealm to authenticate the user. I think the biggest disadvantage I can see when using ServletAuthentication is that the requested resource will not be returned after authentication cause the page returned after authenticating the user is actually hard coded (for my case, it's the home.jsp)
cheers...
Jerson
"John Wang" <[email protected]> wrote:
>
Hi Jerson,
I tried your code this weekend, it didn't work in my case. But
I solved my specific problem other way. The idea behind my problem is that the user tries to relogin when he already logs in. Therefore, I just redirect the user into another page when he is getting the login page by htting the BACK button, rather than reauthenticate the user as the way you did.
But, I think your idea is very helpful if it could work. Problems such multiple concurrence logins can be solved by pre-processing.
In your new code, you solved the problem with a new approach. I am just wondering, do you still implement it with your login.jsp file? In other word, your action in login.jsp is still "Authenticate"? Where do you put the URL "j_security_check"?
Thanks.
-John
"Jerson Chua" <[email protected]> wrote:
I've solved the problem by using ServletAuthentication. So far I'm not getting the error message. One of the side effects is that it doesn't return the requested URI after authentication, it will always return the home page.
Jerson
package com.cyberj.catalyst.web;
import weblogic.servlet.security.*;
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
public class Authenticate extends HttpServlet {
private ServletAuthentication sa = new ServletAuthentication("j_username", "j_password");
public void doPost(HttpServletRequest request, HttpServletResponse response)
throws ServletException, java.io.IOException {
int authenticated = sa.weak(request, response);
if (authenticated == ServletAuthentication.NEEDS_CREDENTIALS ||
authenticated == ServletAuthentication.FAILED_AUTHENTICATION) {
response.sendRedirect("fail_login.jsp");
} else {
response.sendRedirect("Home.jsp");
public void doGet(HttpServletRequest request, HttpServletResponse response)
throws ServletException, java.io.IOException {
doPost(request, response);
"Jerson Chua" <[email protected]> wrote:
The problem is still there even if I use page redirection. Grrr... My boss wants me to solve this problem so what are the alternatives I can do? Are there any other ways of authenticating the user? In my web tier... I'm using isUserInRole, getRemoteUser and the web tier actually connects to EJBs. If I implement my custom authentication, I wouldn't be able to use this functionalities.
Has anyone solved this problem? I've tried the example itself and the same problem occurs.
Jerson
"Cameron Purdy" <[email protected]> wrote:
Jerson,
First try it redirected (raw) to see if that indeed is the problem ... then
if it works you can "fix" it the way you want.
Peace,
Cameron Purdy
Tangosol, Inc.
http://www.tangosol.com
+1.617.623.5782
WebLogic Consulting Available
"Jerson Chua" <[email protected]> wrote in message
news:[email protected]...
Hi...
Thanks for your suggestion... I've actually thought of that solution. Butusing page redirection will expose the user's password. I'm thinking of
another indirection where I will redirect it to another servlet but the
password is encrypted.
What do you think?
thanks....
Jerson
"Cameron Purdy" <[email protected]> wrote:
Maybe redirect to the current URL after killing the session to let the
request clean itself up. I don't think that a lot of the request (such
as
remote user) will be affected by killing the session until the nextrequest
comes in.
Peace,
Cameron Purdy
Tangosol, Inc.
http://www.tangosol.com
+1.617.623.5782
WebLogic Consulting Available
"Jerson Chua" <[email protected]> wrote in message
news:[email protected]...
Hello guys...
I've a solution but it doesn't work yet so I need your help. Because
one
of the reason for getting form base authentication failed is if an
authenticated user tries to login again. For example, the one mentionedby
John using the back button to go to the login page and when the user logsin
again, this error occurs.
So here's my solution
Instead of submitting the page to j_security_check, submit it to a
servlet
which will check if the user is logged in or not. If yes, invalidates its
session and forward it to j_security_check. But there's a problem in this
solution, eventhough the session.invalidate() (which actually logs theuser
out) is executed before forwarded to j_security_check, the user doesn't
immediately logged out. How did I know this, because after calling
session.invalidate, i tried calling request.RemoteUser() and it doesn't
return null. So I'm still getting the error. What I want to ask you guyis
how do I force logout before the j_security_check is called.
here's the code I did which the login.jsp actually submits to
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
public class Authenticate extends HttpServlet {
public void doPost(HttpServletRequest request, HttpServletResponseresponse)
throws ServletException, java.io.IOException {
if (request.getRemoteUser() != null) {
HttpSession session = request.getSession(false);
System.out.println(session.isNew());
session.invalidate();
Cookie[] cookies = request.getCookies();
for (int i = 0; i < cookies.length; i++) {
cookies.setMaxAge(0);
getServletContext().getRequestDispatcher("/j_security_check").forward(reques
t, response);
public void doGet(HttpServletRequest request, HttpServletResponseresponse)
throws ServletException, java.io.IOException {
doPost(request, response);
let's help each other to solve this problem. thanks.
Jerson
"Jerson Chua" <[email protected]> wrote:
I thought that this problem will be solved on sp6 but to my
disappointment, the problem is still there. I'm also using RDBMSRealm,same
as John.
Jerson
"Cameron Purdy" <[email protected]> wrote:
John,
1. You are using a single WL instance (i.e. not clustered) on that
NT
box
and doing so without a proxy (e.g. specifying http://localhost:7001),
correct?
2. BEA will pay more attention to the problem if you upgrade to SP6.If
you don't have a reason NOT to (e.g. a particular regression), then
you
should upgrade. That will save you one go-around with support: "Hi,I
am
on SP5 and I have a problem.", "Upgrade to SP6 to see if that fixes
it.
Call back if that doesn't work."
3. Make sure that you are not doing anything special before or after
J_SECURITY_CHECK ... make sure that you have everything configuredand
done
by the book.
4. Email BEA a bug report at [email protected] ... see what they say.
Peace,
Cameron Purdy
Tangosol, Inc.
http://www.tangosol.com
+1.617.623.5782
WebLogic Consulting Available
"John Wang" <[email protected]> wrote in message
news:[email protected]...
Cameron,
It seems to me that the problem I encountered is different a little
from
what you have, evrn though the error message is the same eventually.
Everytime I go through, I always get that error.
I am using weblogic5.1 and sp5 on NT4.0. Do you have any solutions
to
work
around this problem? If it was a BUG as you
pointed out, is there a way we can report it to the Weblogic
technical support and let them take a look?
Thnaks.
-John
"Cameron Purdy" <[email protected]> wrote:
John,
I will verify that I have seen this error now (after having read
about it
here for a few months) and it had the following characteristics:
1) It was intermittent, and appeared to be self-curing
2) It was not predictable, only seemed to occur at the first
login
attempt,
and may have been timing related
3) This was on Sun Solaris on a cluster of 2 Sparc 2xx's; the
proxy
was
Apache (Stronghold)
4) After researching the newsgroups, it appears that this "bug"
may
have gone away temporarily (?) in SP5 (although Jerson Chua
<[email protected]> mentioned that he still got it in SP5)
I was able to reproduce it most often by deleting the tmpwar and
tmp_deployments directories while the cluster was not running,
then
restarting the cluster. The first login attempt would fail(roughly
90%
of
the time?) and that server instance would then be ignored by the
proxy
for a
while (60 seconds?) -- meaning that the proxy would send all
traffic,
regardless of the number of "clients", to the other server in thecluster.
As far as I can tell, it is a bug in WebLogic, and probably has
been
there
for quite a while.
Peace,
Cameron Purdy
Tangosol, Inc.
http://www.tangosol.com
+1.617.623.5782
WebLogic Consulting Available
"John Wang" <[email protected]> wrote in message
news:[email protected]...
Hi Everyone,
The following problem related to form-based authentication
was posted one week ago and no reponse. Can someone give it
a shot? One more thing is added here. When I try it on J2EE
server and do the same thing, I didn't encounter this error
message, and I am redirected to the homeage.
Thanks.
-John
I am using weblogic5.1 and RDBMSRealm as the security realm. I
am
having
the following problem with the form-based authentication login
mechanism.
Does anyone have an idea what the problem is and how to solve it?
When I login my application and logout as normal procedure, it
is
OK.
But
if I login and use the browser's BACK button to back the login
page
and
try
to login as a new user, I got the following error message,
"Form based authentication failed. Could not find session."
When I check the LOG file, it gives me the following message,
"Form based authentication failed. One of the following reasons
could
cause it: HTTP sessions are disabled. An old session ID was stored
in
the
browser."
Normally, if you login and want to relogin without logout first,
it
supposes to direct you to the existing user session. But I don'tunderstand
why it gave me this error. I also checked my property file, it
appears
that
the HTTP sessions are enabled as follows,
weblogic.httpd.session.enable=true

Problem with "Prohibited name". Disk Utility can't repair the disk!

Hello,
Sorry if my english is not perfect, but I do my best!
I have a problem with almost all applications. When I quit an application, it appear the crashed window. I can submit to Apple support the report, but I don't because there is too much.
I start on a cd-rom and lauch Disk utility. It can't repair the disk because of two "prohibited name" lines in red. No more information!
What are the two "prohibited name"? File? Folder?
How to repair the disk?
Any idea?
Please, help me.
Thank.

Bienvenue To  Discussions GMDC!
Exactly which model Mac G5 is it?
What size is the Hard Drive, and how much space is available?
How much RAM is installed, and is it original or added?
What peripherals do you have connected? A keyboard, mouse, printer, external drive or modem, router, etc?
What happened between the last time the Mac functioned successfully, and when it didn't?
Have you made any changes, like upgrading the system, updated or installed any applications or programs, etc?
Have there been any unusual occurences, like freezes, crashes, power outages, etc?
See if you are able to perform the procedures posted below, and post the results.
THESE ARE THE STEPS FOR USING DISK UTILITY TO REPAIR YOUR HD
1.Insert the System Install disk, Mac OS X CD-ROM disk, or Restore DVD disk, then restart the computer while holding the C key. Use the System disk, of the OS, that is currently installed.
2.Once started up from CD or DVD, on the Menubar at the top of the screen, choose Disk Utility from the Installer contextual menu for Panther, or Utilities for Tiger.
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from disc to access Disk Utility.
3.Click the First Aid tab.
4.Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5.Select your Mac OS X volume, if necessary.
6.Click Repair. If DU reports errors it has fixed, re-run Repair Disk until no errors are reported.
7.Repeat steps 5 & 6, but select the Hard Drive this time. It's usually the first listed with the manufacturer's model number. Make note of the S.M.A.R.T. status.
8.When finished, select Quit Disk Utility from the Installer menu.
9.Select Quit Installer from the Installer menu.
10.In the resulting pop-up window, choose restart.
11.After the computer has restarted, you can eject the CD.
TO REPAIR PERMISSIONS ON THE STARTUP DISK
1.Open Disk Utility, located in Applications/Utilities, and select the startup disk in the left column.
2.Click First Aid.
3.Click Verify Disk Permissions to test permissions or Repair Disk Permissions to test and repair permissions. (I never "Verify". Just run "Repair".)
When "Repair Permissions" is complete. Quit "Disk Utility".
ali b

I hv a problem with my iphone when i rester is not working ...

hi . I have a problem with my I phone .16GB model number is A1303 FCC ID;***** IC ID;****... WHEN I RESATE MY IPHONE AFTER THAN IS NOT ON ...IS NOT OPEN ,IS NOT WORKING THANK U .....
<Edited By Host>

okay. I tried the airplane mode and do not disturb on and off thing, resetting the network settings and all settings, restoring the iPhone using iTunes, draining phone using flashlight, reheating the phone using hair dryer and freezing the phone.. the freezing makes my wifi work again but it only last a couple of hours and I didn't want to try it anymore because I'm afraid it may cause another problem to my phone if I keep doing that.

Problem with single quote around ANYINTERACT

CREATE TABLE JUNK
as SELECT s.survey_id,s.shape,s.original_depth
FROM bathyuser.sounding s,m_covr r
WHERE SDO_GEOM.RELATE (s.shape, 'ANYINTERACT', R.geom, 0.5) = 'TRUE'
AND R.DSNM=CNT.DSNM
and
s.SURVEY_ID in
(SELECT unique s.survey_id FROM header s, m_covr r
WHERE SDO_GEOM.RELATE (s.shape, 'ANYINTERACT', r.geom, 0.5) = 'TRUE'
AND DSNM=CNT.DSNM)';
This above SQL works fine in SQL prompt. But when I put it together in PL/SQL it gives me this error :
WHERE SDO_GEOM.RELATE (s.shape, 'ANYINTERACT', R.geom, 0.5) = 'TRUE'
ERROR at line 17:
ORA-06550: line 17, column 39:
PLS-00103: Encountered the symbol "ANYINTERACT" when expecting one of the
following:
* & = - + ; < / > at in is mod remainder not rem
<an exponent (**)> <> or != or ~= >= <= <> and or like LIKE2_
LIKE4_ LIKEC_ between || multiset member SUBMULTISET_
Could someone help me fix this error. I know I have to try it with "EXECUTE IMMEDIATE" command, but I'm having problem with "||" (concatinate).
Thanks so much
Cuong

This is how you go about debugging execute immediate statements. I am assuming that you fixed the first problem as marias suggested and cam up with something like this. Note, I changed the table in your surso to dual since I do not have your tables, but the effect is the same. I changed the EXECUTE IMMEDIATE to DBMS_OUTPUT.Put_Line so you can actually see what you are trying to execute. I also added some carriage returns to make the formatting a littel easier to see. This is what I got:
SQL> DECLARE
2     statement varchar2(1000);
3 CURSOR C_DSNM5 IS
4     SELECT dummy dsnm FROM dual;
5 BEGIN
6     FOR CNT IN C_DSNM5 LOOP
7        STATEMENT := 'CREATE TABLE JUNK'||
8                     ' AS SELECT s.survey_id,s.shape,s.original_depth'||CHR(10)||
9                     ' FROM bathyuser.sounding s,m_covr r '||CHR(10)||
10                     'WHERE SDO_GEOM.RELATE (s.shape, '||
11                     '''ANYINTERACT'''||
12                     ', R.geom, 0.5) = '||'''TRUE'''||CHR(10)||
13                     ' AND R.DSNM = CNT.DSNM '||CHR(10)||
14                     ' AND s.SURVEY_ID IN '||
15                     ' (SELECT UNIQUE s.survey_id FROM HEADER s, m_covr r'||CHR(10)||
16                     ' WHERE SDO_GEOM.RELATE (s.shape, '||
17                     '''ANYINTERACT'''||
18                     ', r.geom, 0.5) = '||
19                     '''TRUE'''||CHR(10)||
20                     ' AND R.DSNM = '||CNT.DSNM||' )';
21        DBMS_OUTPUT.Put_Line (statement);
22     END LOOP;
23 END;
24 /
CREATE TABLE JUNK AS SELECT s.survey_id,s.shape,s.original_depth
FROM bathyuser.sounding s,m_covr r
WHERE SDO_GEOM.RELATE (s.shape, 'ANYINTERACT', R.geom, 0.5) = 'TRUE'
AND R.DSNM = CNT.DSNM
AND s.SURVEY_ID IN (SELECT UNIQUE s.survey_id FROM HEADER s, m_covr r
WHERE SDO_GEOM.RELATE (s.shape, 'ANYINTERACT', r.geom, 0.5) = 'TRUE'
AND R.DSNM = X )
PL/SQL procedure successfully completed.You have at least two issues with this CREATE TABLE statement. The last line needs to have the X (which came from dual) quoted since it is a string. You also still have a reference to CNT.DSNM, unless you fixed both occurences.
Another major problem is that if your cursor will return more than one row, and by the structure of this I assume that it might, the on the second record you are going to get:
ORA-00955: name is already used by an existing object.
Although I see no reason why you need dynamic sql here, you really need to use bind variables whereever possible (everywhere you use a variable except ofr names of database objects. So, your procedure should look more like:
DECLARE
   statement varchar2(1000);
   CURSOR C_DSNM5 IS
      SELECT distinct DSNM from M_COVR where dsnm like 'US5%';
BEGIN
   FOR CNT IN C_DSNM5 LOOP
      STATEMENT := 'CREATE TABLE JUNK'||
                   ' AS SELECT s.survey_id,s.shape,s.original_depth'||
                   ' FROM bathyuser.sounding s,m_covr r '||
                   'WHERE SDO_GEOM.RELATE (s.shape, '||
                   '''ANYINTERACT'''||
                   ', R.geom, 0.5) = '||'''TRUE'''||
                   ' AND R.DSNM = :b1 '||
                   ' AND s.SURVEY_ID IN '||
                   ' (SELECT UNIQUE s.survey_id FROM HEADER s, m_covr r'||
                   ' WHERE SDO_GEOM.RELATE (s.shape, '||
                   '''ANYINTERACT'''||
                   ', r.geom, 0.5) = '||
                   '''TRUE'''||
                   ' AND R.DSNM = :b2 )';
      EXECUTE IMMEDIATE statement USING cnt.dsnm, cnt.dsnm
   END LOOP;
END;But it is still very wrong.
Perhaps if you can explain in words what you are trying to accomplish someone can provide a much better response.
John

Has anyone had a problem with their imac because the power company installed a smart meter which broadcasts the readings to the company?

Has anyone had a problem with their imac after the power company--in my case Pepco in Washington DC--installed "smart meters" which read the meter and transmit the data via wireless? I've had trouble and when I move the imac downstair it disappears. Help!

barryfromwashington wrote:
would putting up a metal shield by the meter help?
It might, as long as the shield is grounded. Metallic (such as copper) window screen is often sufficient.
As mentioned, it would not hurt to file a complaint. The burden of proper shielding should probably belong to Pepco. Among other things, the FCC frowns upon RF leakage and its interfereing with radio communications. Besides, Pepco probably would not want you to affix a shield around their gear - liability issues, etc.
You could experiment by temporarily hanging a shield-screen on the inside of the wall, behind where the meter transmitter device is located, and see if there is any beneficial change.

FCC - Problem with occurence

Similar Messages

Maybe you are looking for