FCE and Euphonix MC Transport

Is there any reason why Euphonix MC transport does not support FCE4 when it works with Logic, FCP,Garage Band and Sound track pro?

Because Apple decided not to?
Who knows...well, Apple does. And they don't hang out here.
Shane

Similar Messages

Final Cut Express 4 and Euphonix MC transport

Is there any reason why Euphonix MC transport does not support FCE4 when it works with Logic, FCP,Garage Band and Sound track pro

Final Cut Express HD are older versions of the application. The HD has been dropped from the name with FCE4.

Enhancements is not active and cannot be transported

Hi All,
We are getting following error message when releasing a Transport request in CRM system which is on 7.0 version on MaxDB.
"Enhancements is not active and cannot be transported".
The strange thing is that the Tasks underneath are all released successfully , but only the TR is not getting released.
Also, the logs in transports do not point to which enhancement is not active as well.
Any help in this issue is highly appreciated.
Regards,
Murali Narayanan

Hi Murali,
Go to the enhancement and check the tables.fields,includes and it request nos.Go to that transport request ,double click on that see what and all there under it. Post if need help.
Regards,
Madhu.

Hello, i created 5 different books (photo album) and i would like to know if it's possible to make one single order (and pay the transportation fees only once...) i couldn't find how

hello, i created 5 different books (photo album) and i would like to know if it's possible to make one single order (and pay the transportation fees only once...) i couldn't find how

Soory, no, it is not possible. You can only combine multiple copies of the same book into one order.
Regards
Léonie

Transport Layers and sharing of transport directories

Hello Experts,
We are on R/3 4.7 Enterprise extension set 1.10 with oracle 9i .
In a three tier architecture in R/3 with development , quality and production , how do we assign transport layers and how many transport layers do we need at the time of TMS configuration ?
Secondly in our R/3 three tier landscape , we hv transport directories (trans ) on every system on all the three systems ,then how are they shared with each other , i mean on wt basis do they recognise each other and transport continues frm DEV to QUA and then to production
Requested to revert at earliest as this is very urgent . points guaranteed .
Regards,
Somya

Hi ,
1) sap and Zdev are transport layers....which will be assigned by default when you configure TMS.
what does SAP and ZDEV do ?you can take it like this..standard programs..will go through sap...and customized like (Z or Y programs )will go thorough Zdev path.
the program routing is taken care automatically..(just for your info)
you never need to define transport layer between QA and PRD unless you want add one more Sandbox system for more quality testing..(normally in 3 system landscape you dont configure transport layers between QA and PRD
2) as of now in your scenerio ..its not being shared..
if you plan your DEV as transport domain controller..then in QAS system execute STMS-->system Overview >QAS double click>Communication (change transport domain to Domain controller transport domain) and also transport tool >transdir>(should poing to
<domain controller>\sapmnt\trans)
save the changes..
on the domain controller . in TMS you will see a system waiting for inclusion onto domain ..approve that..and follow the same procedure to add PRD system also..
then all the systems will share the same transport directory..
(Caution: once you setup the landscape like this ..changes to any system using STMS like QAS and DEV has to be done only on Domain controller.)
Cheers
Kamal

Quality and aspect ratio with FCE and iPhoto

Project started by importing hundreds of slides shot by different cameras with difference settings. Slides were imported into i-photo where I used the slideshow function to make several segments. As I was choosing the photos and dragging them into slideshows I cropped them all into 16x9 ratio so they would all be uniform. I then sent to QuickTime movie using the built in iPhoto export button and selected “custom export” setting with DV/DVCPRO-NTSC compression with quality set to “Best” and aspect ratio to 16x9.
Then imported into FCE and did serious editing (music, effects, titles, etc.). When finished I tried exporting as both a QT self-contained movie and QT conversion (using DV/DVCPRO and 16:9) but the quality is terrible and when I make a iDVD the picture is squeezed and distorted into a 4:3 ratio despite the fact that the IDVD is set to 16:9. I have spent over a month on this project and have fellow travelers waiting for my “creative” touch. Can anyone tell me where I went wrong on both aspect ratio and quality? Thanks.
PS: Am using MacBook Pro, OS 10.7.4 FCE 4.0.1 and iPhoto-11 9.3.2

Hi
I'm not shure - but I can share my thoughts
I tried exporting as both a QT self-contained movie and QT conversion (using DV/DVCPRO and 16:9)
I DO NEVER - Use Export as QuickTime CONVERSION
I DO - Share as QuickTime .mov - straight off
I had problems with 16x9 until I understood that
• I had to select type of project as WideScreen in FC
• Browser Window in FinalCut E and Pro - can extend far to the Right with several Columns. One Column states Anamorphic. When set my material to this. THEN introduced it into TimeLine. Can not be done in after hand.
• Export as above
• In iDVD there are TWO places to set 16x9
- When creating a NEW iDVD Project - SELECT --> WideSrceen
- In iDVD Project / Projectinfo [ Shift+cmd+I ]- ALSO set 16x9
Yours Bengt W

First Project - Poor resolution when working between FCE and LT

I've put together a 1 minute sequence in FCE 4 (1920X1080) and it looks great when I export to QuickTime movie.
I then use that movie as a background in LiveType, adding a bunch of titles and graphics.
If I then render the movie in LiveType the rendered movie chokes and skips. If I import it back into FCE and export it back to a QT movie, it looks poor - compression artifacts and the text doesn't look crisp.
Is there a better way to:
1) Sequence and edit my clips (1 min movie)
2) Add tiles/graphics throughout
3) Output to HD format
Thanks!

I figured it out.....
Rather than rendering the movie in LT and importing to FCE, I just imported the LT project itself. Working between the two apps simultaneously, I can position the text and graphics from LiveType, save, then instantly see the results in FCE.
Everything is looking crisper....

ChaRM: usage of ChaRM and none-Charm transport strategy

Hi ChaRM-TMS Gurus!
We have the following [SAP system landscape |http://www.file-upload.net/view-1086963/SDN_TMS_Ist_Soll.jpg.html] and would like to use ChaRM approach simultaneously.
What are the minimal requirements concerning transport layers/routes, which settings should be changed?
How much and which transport layer/routes does ChaRM need?
a) 1 any new transport layer/route
b) standard transport layer, transport layer "SAP" and others
Should all the standard transport layer/routes from virtual systems to real QAS and PRD systems or can I start as follows:
1) Leave the current TMS settings unchanged
2) Activate the extended transport control
Result: the current setting will be client specific and all the old transport requests will be moved to client specific transport routes
3) change the transport strategy (from mass transport to single transport)
3) Define new transport layer
4) Define new transport route for SAP objects from DEV to QAS
and assign the transport layer from 3) (client specific)
5) Define new transport route ZXXX from DEV to QAS
and assign the transport layer from 3) (client specific)
6) Define the delivery transport route from QAS to PRD (client specific)
7) activate and distribute the settings
Thank you very much indeed!
Thom

Hi Martin,
Solmaniacs' assumptions are correct. You can have as many source clients as you want.
As long as
- STMS configuration (transport routes, and domain links) are consistent
- SMSY configuration (logical components are declared properly with assigning the right role types to systems/clients)
- Project declaration are done correctly (so that from Solman solar_project_admin you can read the STMS as confiured in the distant STMS domain)
- IMPORTANT: those configuration GO ALONG with each other !! (SMSY should nt contradict STMS for example...)
The tasklist that is generated for each Solman project will be as follow
- Node 1: Header Tasks (commun to all systems)
- Node x: Corresponding to track x declared in Project (each Source System will have his own node with the corresponding track under)
- Node x+1
- Node ...
- Last Node : Tasks for Tasklist closure - checks on scma consistancy and CTS projects closure
So you'll always have n+2 nodes in your tasklist; n beeing the number of declared source (=dev) systems in project
For each action launched from change docuemnts like creation of TR, release of TR or Retrofit (as Solmaniac said) you'll have an additional pop-up that will appears letting you choose the system you want to use for the action
Hope its helpful
Regards
Khalil

Can I digitize in FCE and then transfer these into FCP?

Hi,
I have FCE 4 at the moment and looking to get FCP shortly. But I have some footage that I'd really like to get digitized now while waiting for FCP. Can I digitize in FCE and then import into FCP?
Thanks

Hey Tom,
Thanks for that. So does edited stuff open perfectly in FCP, or are there any potential problems?

Resolution recommendations for HDV, FCE and iDVD

The Canon HV30 camcorder outputs HDV in 1080/60i, 1080/24p, 1080/30F, 1080/24F, 1080/30p. Which of these would yield the best results from a workflow and image quality point of view through FCE and iDVD for creating a DVD to be used on an HDTV fed by a progressive-scan DVD player?
Can any of these formats be edited and then written back to tape without losing a lot of image quality?
Also interested if iMovie 9 is the same in these areas as FCE (which I already have).
Thanks in advance!
MikeR

So, it doesn't matter what I shoot in - the quality will be equal no matter if it's progressive to start with or interlaced? I might have thought that keeping things progressive all the way through would be the best for a DVD played on an HD set.
MikeR

I'm sorry, I have to convert the mov file. for use with fce and / or imovie11, better ProRes422 or intermediate codec?

I'm sorry, I have to convert the mov file. for use with fce and / or imovie11, better ProRes422 or intermediate codec?

FCE only used AIC for HD.
Al

FCE and FCE HD Firewire Connection Issues

Hello, I just recently cleaned out my hard drive and reinstalled Tiger 10.4.11. I reinstalled all my previous applications with out any problems, but I had an issue with both versions of FCE. For some reason it won't recognize my firewire port. I don't know if there was something else I had to do to get it to recognize. The cable is fine and the camera, because I got it to work with my Power Mac G4 last night, but it doesn't work for my laptop. Any ideas? Thanks, Matt

All HDV is MPEG-2 based. It's an HDV tape camera. The problem is QT7.4 and the older version of FCE. Some people have got this to work. I don't know how, but many others have had problems using that and older versions of FCE and newer versions of QuickTime, 7.3 and probably 7.4 as well.

Just setting up FCE and have question

This is probably a stupid question but when I set up FCE and select my external drive as my scratch drive, where will the project folder be created? Is it on the external drive with the clips etc. I import or will it be located in the documents folder on the system hard drive?
Thanks

If you set your scratch disk to an external drive, all files created by FCE during capture, rendering, auto-saving, and all support files (waveforms, thumbnails etc.) will be stored into the external drive. Instead your project file (.fcp) will be saved where you decide to, when you issue the Save Project As command. Project files are usually saved into the user document folder of the startup disk.
A Final Cut Express Documents folder is created by FCE in the scratch disk, containing subfolders specific for each use. One specific subfolder (Capture Scratch) will store all media captured by FCE, and you must never delete files from that subfolder, unless you remove the whole project, because they contain your actual movies.
A warning: in FCE a "clip" is in fact a "pointer to" a portion of the media file in the capture scratch folder, it is not the media file itself. When you capture, a new media file is created in the capture scratch folder and a new clip is created in the FCE browser pointing to that media file. But if you remove the clip in FCE you do not remove the corresponding media file. The opposite is also true: if you remove the media file from the folder the clip will still be in the FCE browser (or timeline) pointing to nothing. This is called an offline clip, which may also be reconnected to the same media file manually.
Piero

Planning Ahead FCE and HD

So I bought a Sony HD camcorder. I have shot some footage and copied the resulting files in the camcorder (folders named AVCHD, AVF_INFO, DCIM, and MODELCFG.IND) on to my desktop into a folder SONY. I shall move that folder SONY to an ext HD. If I understand (and please correct me) I need FCE 4 to handle the AVCHD video. When I get FCE 4, I import the SONY into FCE and carry on. Do I have it right? Thanks. Happy Thanksgiving. Happy Black Friday

So I installed FCE per the directions. All appears right. Refer to the documentation to see how to do the Log and Transfer trick. Move the above mentioned folder Sony to the ext HD. Set System Settings scratch disk, etc. to Sony on the ext HD. Create a bin Test in the browser. Click Cmd-Sh-8 to open the L & T window. The documentation says the assets will appear in the window. But they don't. Now what?

Green flashing behind clip in FCE and clip in corner?!

Hi, I recently started a new project in FCE and started to add clips. As I added them I realised the clip was in the top left hand corner and the background flashes green and black?! I've tried deleting the clips and re-importing them and I've also tried closing FCE and reopening it but nothing seems to work?
Please help

Where did these files come from?
You need a third party application like Streamclip from Squared 5 (free).
You then bring a clip into Streamclip and export as a Quicktime file using settings that match an FCE Easy Setup.
The current files look very non-standard for FCE use.
I'm not even sure if they are DV NTSC or HD that has been manipulated somewhere else.
Any file/clips that are used in FCE should match one of the Easy Setup specs or FCE is forced to render or in a worst case not even play. Your files sit in the middle, sort of playing.
Al

FCE and Euphonix MC Transport

Similar Messages

Maybe you are looking for