FCP hangs when speeding up AVCHD video.

Just what the title says. I import a large MTS file and start a new project. Everything is fine until I try to speed the video up whether that be 2x, 4x, 8x, etc. If I remove the audio it all works again. So it seems the audio is really causing issues when trying to speed up the video. What I am trying to do is speed the video up and maintain the audio pitch and I do have that checked, but my late 2013 Retina MacBook Pro i7 quad 2.6GHz 16GB 512GB SSD laptop gets very upset. Also, I have noticed by using the Activity Monitor that the process that speeds video up only uses one thread to do so which is highly disappointing since this is a very intensive operation. Is this a bug and is anyone else experiencing this?

The Original Media folder definitely has the .mts file and the Transcoded Media has the .mov files.
Tracked it down and it was me not being patient. If I try to accelerate the video right after I import the video and not wait for the background tasks to complete (I am guessing the transcoding of the video after the import in this case) FCPX hangs pretty hard. Sometimes it recovers after a long wait, but never fully acts normal after that. If I wait for the background tasks to complete and the meter reaches 100% all is good. I can understand my MacBook Pro being upset when the Activity Monitor looks like this and I am trying to load more on top of it.
I would say this is taking full use of my late 2013 MacBook Pro's quad core i7 2.6GHz CPU. 8 threads screaming and on-board fans whistling. Poor little guy.

Similar Messages

Freezing/hanging when taking pictures and videos in i phone 4

freezing/hanging when taking pictures and videos in i phone 4 with flash on.

Hi Mister.
Let's try to answer your questions.
- The E5 does not have a red light when you take pictures.
- I don't know about battery life comparing with E6 and E72, just can say on the E5 is quite good. It has a 1200 mAh battery, you should check the others, but also the features of each one, i.e. the E6 is a touchscreen one, so it consumes more power.
- It has a notification white light, around the navigation button.
Regards.

What's the most effective way to speed up AVCHD video editing?

Hello Everyone,
I'm having the same problem, my wife and I have a small wedding videography company, I film jobs on weekends when I'm not working full time and my wife stays home with our 2 year old daughter and edits during the week.
When jobs come in we both are using our macbook pro's for the import process because it takes SOOO long to import all the avchd clips. We're filming with the Panasonic HMC40 shooting in 720/30p on Class 10 16GB SDHC Cards.
I have an early 2008 macbook pro, 2.4Ghz Core 2 Duo 2GB of ram, and my wife has a 2010 unibody with a dual core i5 w/ 4GB of ram.
As a test, I imported an 8 minute and 47 second clip in my machine, and the import takes 20:39. I went to my local apple store and ran the same import test on brand new machines and here are the results:
mbp Core 2 duo 2GB ram time: 20:39 (my machine)
mbp dual core i5 4GB ram time: 7:08 (my wife's machine)
mbp quad core i7 4GB ram time: 4:50
mba core 2 duo 1.86Ghz 2GB ram SSD 64GB drive time: 12:17
imac quad core 2.7Ghz 4GB ram time: 4:54
imac quad core 2.8Ghz 3GB ram 4:27
mac pro 2.8Ghz 3GB ram 3:42
I watched the quad core i7 macbook pro's performance monitor, and at one point it had 63 iMovie threads running to import the footage. The biggest bottleneck for importing avchd seems to be the processor. With an import time of about have of the real time, that has the biggest appeal to me, but comes at a starting price of $1799 + tax, and is expensive.
What I'm looking for is the most cost effective way to cut down on import and export times for either new hardware or software. I haven't tested the elgato h.264 HD encoder yet, nor have I tested the new Final Cut X. Has anyone done this? What about Adobe Premier Elments or Premier Pro
Our compeditors are offering 'same day edit' services, and making basically a trailer of the events that happen at the ceremony, then editing them on site in a 3-4 hour time window between the ceremony and reception, then using a projector and screen to show that trailer at the beginning of the reception, usually added to the slide show.
That's the kind of thing that we want to be able to do for our customers, but also to cut down the massive amount of editing time it takes to get every finished product out the door.
What does everyone think? Is the elgato h.264 HD encoder worth it? Is there a more professional avchd / h.264 hardware / software solution that can speed up the import process faster?
I'd love to know everyone's thoughts.
Thanks.
Chris
[URL="http://freedomvideography.com"]Wisconsin Wedding Videography[/URL]

One thing you might consider...
Go to Final Cut Pro X.
In FCP 10, you can import AVCHD and begin editing immediately. You can edit natively in AVCHD if your needs are very simple, but most people would use FCP to "optimize" the AVCHD to ProRes 422, which is an intermediate codec like Apple Intermediate Codec, but provides higher quality. The optimizing to ProRes 422 as well as analyzing for stabilization, sound, and color takes place in the background if you have cores available.
But you can edit immediately, and as the optimized clips become available, FCP will automatically use them instead of the AVCHD clips.

FCP Freezes When Exporting to Flash Video (FLV)

Final Cut Pro 7.0.2 freezes when exporting to Flash Video (FLV). The resulting FLV file contains only a few seconds of the exported video. A 2009 Apple Support notice offers this re. FCP 6 and CS3 Flash Video Encoder...
===
Final Cut Pro: May quit unexpectedly when exporting to Flash
Last Modified: February 13, 2009
Article: TS2593
Symptoms
Final Cut Pro may quit unexpectedly when you export using QuickTime Conversion if you choose Flash Video (FLV) from the Format menu.
Products Affected
Final Cut Pro 6.x, Adobe Creative Suite 3 Flash Video Encoder
Resolution
This can happen if you use the Adobe Creative Suite 3 Flash Video Encoder and Final Cut Pro together. This issue does not occur with the Flash Video Encoder in Adobe Creative Suite 4. To work around the issue:
Choose File > Export > QuickTime Movie.
Be sure to enable Make Movie Self-Contained.
Open the exported movie in QuickTime Player.
Export the movie to Flash from QuickTime Player.
===
I just installed CS5, so I would think I shouldn't be bothered with an older, problematic Flash Video Encoder. I don't think I should have to convert an MOV file to an FLV file using QuickTime Reader or anything else. Why doesn't it export correctly out of FCPro 7.0.2?

oh well.

MAC HANGS WHEN I WRITE DVD VIDEO USING TOAST OR IDVD

DEAR SIR,
I HAVE A PROBLEM WITH MY SONY DVD .. EVERY TIME I TRY TO WRITE DVD VIDEO MY MAC HANGS WHEN TOAST ROXIO 10 STARTS TO LEAD OUT AFTER ENCODING THE VIDEO .. AND IT HANGS ALSO WITH IDVD AFTER ENCODING THE VIDEO .. AND I MUST RESTART MY MAC ...PLEASE TELL ME HOW TO FIX IT ??
Model: SONY DVD RW DRU-835A
Revision: SS02
Removable Media: Yes
Detachable Drive: No
BSD Name: disk2
Protocol: ATAPI
Unit Number: 1
Socket Type: Internal
Low Power Polling: No
Mac OS 9 Drivers: No
Partition Map Type: Unknown
S.M.A.R.T. status: Not Supported
THANK YOU FOR YOUR TIME
TAHA TALAAT
[email protected]

This is a user forum.
Caps is considered yelling, inappropriate, a left over from DOS, too. Oh, and it actually is HARDer to read.

Premiere Pro cs4 hangs when trying to import video

just as the title insues it hangs when i try to import a clip......i just need to shed some ligt on it...so anything will help
im kinda new to premiere is it because it is mpeg4 is so this is a short topic

>it's all too big.
What does that mean? File size? Scale?
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

MacBook (Early 2009) - Screen freezes (hang) when playing music or video

Hi,
I have an strange problem with MacBook (Early 2009). Whenever I play music using ITunes or DVD with IDVD or even watch a video on youtube, my macbook will hang suddenly and a strange sound will come out.
To recover from this problem, i have to power off the system and power on the system again.
Initially, I thought it is related to iTunes but the same problem occurs even i use other alternatives (e.g. songbird) for playing of songs.
Please kindly advice me.
Thank you.
Michael.

I have a similar problem since the last update 10,5,7.
Always when I connect my iPod80GB the computer hangs, the problem only exist when running Mac OS X. It won't happen while running windows.
The same problem when I connect an external hard drive the computer hangs aswell (Mac OS X) (not in windows).
My personal feeling is that there are serious bugs in the last program update.

FCP Hangs for no discernible reason

FCP 7.0.2 has been hanging a lot lately - crashing several times a day. I'm working on a ProRes HD timeline, and sometimes when I try to play the timeline, I get the beachball. Ultimately, I have to force quit, but although the FCP process is not in top or in the Activity Monitor, the OS seems to think it's still active. The icon is still in the dock with the white dot and if I alt-tab, it's there, too. If I quit the app, and let the computer sleep, FCP hangs when starting back up.
I have a Blackmagic Decklink SDI card that I thought might be the culprit, but I stopped sending the video signal through it - still the same problem. I tried trashing my prefs and the cache - no dice. Any help would be greatly appreciated.

Probably no help but I recently had the beachball show up for the first time in manyyears. Turned out I was trying to use MP3 and WAV music files in my timeline. Exported them as AIFF and things smoothed right out. Disconcerting with the new hardware and OS, I figured I 'd be gaining, not losing functionality and speed.
bogiesan

Apparent bios bug when there is no video card

I have a system that shouldn't use a video card. I have tested several KT4V and they all hang when there is no video card, even though the bios is set to "Primary Display: Absent".
Any suggestions of a workaround will be highly appreciated.
Thanks

not bad, in UK value thats probably about £15. here in UK if we really want a crappy 3D graphics card , we would go for something like this: http://www.ebuyer.com/customer/products/index.html?action=c2hvd19wcm9kdWN0X292ZXJ2aWV3&product_uid=55029
thats the same value to us as 5 bottles of Budweiser, or 16 litres of petrol

FCP hangs using external fw800 drive

FCP hangs when editing. Using Glyph GT062 in Raid 1, connected with fw800
The problem occurs when accessing large files on the fcp timeline - specially after taking a break.
Please help !
2x2.66 Ghz Dual-core MacPro
4GB 667 Mhz DDR2 FB-DIMM
FCP 6.0.6
Attached stack trace taken during the hang:
Sampling process 162 for 3 seconds with 1 millisecond of run time between samples
Sampling completed, processing symbols...
Analysis of sampling Final Cut Pro (pid 162) every 1 millisecond
Call graph:
1171 Thread_2507
1171 start
1171 _start
1171 main
1171 KGMainEvent(void*)
1171 RunApplicationEventLoop
1171 ToolboxEventDispatcher
1171 SendEventToEventTarget
1171 SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*)
1171 DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*)
1171 ToolboxEventDispatcherHandler(OpaqueEventHandlerCallRef*, OpaqueEventRef*, void*)
1171 SendEventToEventTarget
1171 SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*)
1171 DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*)
1171 Events(OpaqueEventHandlerCallRef*, OpaqueEventRef*, void*)
1171 DoEvent(OpaqueEventRef*, KGDictInt*)
1171 HandleMouseDown(OpaqueEventRef*)
1171 pKGSendWindowMessage(KGWindowRec*, long, long, KGDictInt*)
1171 pKGPanelWindowProc(long, long, KGDictInt*, void*)
1171 TimelineMessageProc(long, long, KGDictInt*, KGPanelRecord*)
1171 ServicesPanelsMessageProc(long, long, KGDictInt*, KGPanelRecord*)
1171 pKGPanelMessage(long, long, KGDictInt*, KGViewRecord*)
1171 PPassMouseEvent(KGPanelRecord*, KGDictInt*, long)
1171 pKGRulerMessage(long, long, KGDictInt*, KGViewRecord*)
1171 pKGPlayerScrubAudio(KGPlayerRec*, double)
1171 KGPlayerScrubAudioFull(KGPlayerRec*, double, KGDictInt*)
1171 pKGAudioMixerDoScrub
1171 pKGAudioSetTransportRate
1171 STTransportStart
1171 STTransport::Start()
1171 STMixer::Start()
1171 AudioUnitGraph::Start()
1171 AudioOutputUnitStart
1171 CallComponentDispatch
1171 DefaultOutputAUEntry
1171 AUGenericOutputEntry
1171 AudioDeviceStart
1171 HALDevice::StartIOProc(long (*)(unsigned long, AudioTimeStamp const*, AudioBufferList const*, AudioTimeStamp const*, AudioBufferList*, AudioTimeStamp const*, void*))
1171 HALPlugIn::DeviceStartIOProc(HALObject const&, long (*)(unsigned long, AudioTimeStamp const*, AudioBufferList const*, AudioTimeStamp const*, AudioBufferList*, AudioTimeStamp const*, void*))
1171 HPHardwarePlugInDeviceStart(AudioHardwarePlugInInterface**, unsigned long, long (*)(unsigned long, AudioTimeStamp const*, AudioBufferList const*, AudioTimeStamp const*, AudioBufferList*, AudioTimeStamp const*, void*))
1171 HPDevice::ExecuteCommand(HPCommand*)
1171 HP_Device::StartIOProc(long (*)(unsigned long, AudioTimeStamp const*, AudioBufferList const*, AudioTimeStamp const*, AudioBufferList*, AudioTimeStamp const*, void*))
1171 HP_IOProcList::StartIOProc(long (*)(unsigned long, AudioTimeStamp const*, AudioBufferList const*, AudioTimeStamp const*, AudioBufferList*, AudioTimeStamp const*, void*))
1171 HP_IOProc::AllocateBufferList(bool)
1171 HPIOProc::AllocateBufferList(HPDevice const&, bool, std::vector<bool, std::allocator<bool> > const&, unsigned long, std::vector<IOBuffer*, std::allocator<IOBuffer*> >&, bool, bool)
1171 IOA_Stream::RegisterIOBuffer(unsigned long, unsigned long, void*)
1171 IOA_HWDevice::RegisterIOBuffer(unsigned int, long, void*, unsigned long, unsigned long)
1171 IOConnectCallMethod
1171 ioconnectmethod
1171 mach_msg
1171 machmsgtrap
1171 machmsgtrap
1171 Thread_2603
1171 thread_start
1171 pthreadstart
1171 select$DARWIN_EXTSN
1171 select$DARWIN_EXTSN
1171 Thread_2703
1171 start_wqthread
1171 _workqops
1171 _workqops
1171 Thread_2803
1171 start_wqthread
1171 _workqops
1171 _workqops
1171 Thread_2903
1171 0x0
1171 0x0
1171 Thread_2a03
1171 0x0
1171 0x0
1171 Thread_2b03
1171 thread_start
1171 pthreadstart
1171 kevent
1171 kevent
1171 Thread_2c03
1171 thread_start
1171 pthreadstart
1171 glvmDoWork
1171 pthreadcondwait$UNIX2003
1171 _semwaitsignal
1171 _semwaitsignal
1171 Thread_2d03
1171 thread_start
1171 pthreadstart
1171 Thread::RunHelper(void*)
1171 DisplayQueue::Run()
1171 Synchronizable::Wait()
1171 pthreadcondwait
1171 pthread_condwait
1171 semaphorewait_signaltrap
1171 semaphorewait_signaltrap
1171 Thread_2e03
1171 thread_start
1171 pthreadstart
1171 Thread::RunHelper(void*)
1171 WorkUnitPerformer::Run()
1171 Synchronizable::Wait()
1171 pthreadcondwait
1171 pthread_condwait
1171 semaphorewait_signaltrap
1171 semaphorewait_signaltrap
1171 Thread_2f03
1171 thread_start
1171 pthreadstart
1171 Thread::RunHelper(void*)
1171 WorkUnitPerformer::Run()
1171 Synchronizable::Wait()
1171 pthreadcondwait
1171 pthread_condwait
1171 semaphorewait_signaltrap
1171 semaphorewait_signaltrap
1171 Thread_3003
1171 thread_start
1171 pthreadstart
1171 Thread::RunHelper(void*)
1171 WorkUnitPerformer::Run()
1171 Synchronizable::Wait()
1171 pthreadcondwait
1171 pthread_condwait
1171 semaphorewait_signaltrap
1171 semaphorewait_signaltrap
1171 Thread_3103
1171 thread_start
1171 pthreadstart
1171 AVS::DestroyAVCDeviceController(AVS::AVCDeviceController*)
1171 CFRunLoopRun
1171 CFRunLoopRunSpecific
1171 mach_msg
1171 machmsgtrap
1171 machmsgtrap
1171 Thread_3203
1171 thread_start
1171 pthreadstart
1171 CAPThread::Entry(CAPThread*)
1171 HALRunLoop::OwnThread(void*)
1171 CFRunLoopRunInMode
1171 CFRunLoopRunSpecific
1171 mach_msg
1171 machmsgtrap
1171 machmsgtrap
1171 Thread_3303
1171 thread_start
1171 pthreadstart
1171 CAPThread::Entry(CAPThread*)
1171 MIO::DAL::RunLoop::OwnThread(void*)
1171 CFRunLoopRunInMode
1171 CFRunLoopRunSpecific
1171 mach_msg
1171 machmsgtrap
1171 machmsgtrap
1171 Thread_3403
1171 thread_start
1171 pthreadstart
1171 ReadSchedulerThreadEntryPoint
1171 TSWaitOnSemaphoreCommon
1171 TSWaitOnConditionTimedRelative
1171 pthreadcond_timedwait_relativenp
1171 pthread_condwait
1171 semaphoretimedwait_signaltrap
1171 semaphoretimedwait_signaltrap
1171 Thread_3503
1171 thread_start
1171 pthreadstart
1171 AIOFileThread(void*)
1171 TSWaitOnSemaphoreCommon
1171 TSWaitOnConditionTimedRelative
1171 pthreadcond_timedwait_relativenp
1171 pthread_condwait
1171 semaphoretimedwait_signaltrap
1171 semaphoretimedwait_signaltrap
1171 Thread_3603
1171 thread_start
1171 pthreadstart
1171 PrivateMPEntryPoint
1171 DecompressFramesMPTask
1171 MPWaitOnSemaphore
1171 semaphoretimedwaittrap
1171 semaphoretimedwaittrap
1171 Thread_3703
1171 thread_start
1171 pthreadstart
1171 PrivateMPEntryPoint
1171 DecompressFramesMPTask
1171 MPWaitOnSemaphore
1171 semaphoretimedwaittrap
1171 semaphoretimedwaittrap
1171 Thread_3803
1171 thread_start
1171 pthreadstart
1171 PrivateMPEntryPoint
1171 DecompressFramesMPTask
1171 MPWaitOnSemaphore
1171 semaphoretimedwaittrap
1171 semaphoretimedwaittrap
Total number in stack (recursive counted multiple, when >=5):
15 pthreadstart
15 thread_start
6 pthread_condwait
Sort by top of stack, same collapsed (when >= 5):
machmsgtrap 4684
semaphorewait_signaltrap 4684
semaphoretimedwaittrap 3513
0x0 2342
_workqops 2342
semaphoretimedwait_signaltrap 2342
_semwaitsignal 1171
kevent 1171
select$DARWIN_EXTSN 1171
Sample analysis of process 162 written to file /dev/stdout

I had the same problem
using exactly the same hardware.
This is my stack file:
Sampling process 193 for 3 seconds with 1 millisecond of run time between samples
Sampling completed, processing symbols...
Analysis of sampling Final Cut Pro (pid 193) every 1 millisecond
Call graph:
1208 Thread_2507
1208 start
1208 _start
1208 main
1208 KGMainEvent(void*)
1208 RunApplicationEventLoop
1208 ToolboxEventDispatcher
1208 SendEventToEventTarget
1208 SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*)
1208 DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*)
1208 ToolboxEventDispatcherHandler(OpaqueEventHandlerCallRef*, OpaqueEventRef*, void*)
1208 SendEventToEventTarget
1208 SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*)
1208 DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*)
1208 StandardWindowEventHandler(OpaqueEventHandlerCallRef*, OpaqueEventRef*, void*)
1208 HandleMouseEvent(OpaqueEventHandlerCallRef*, OpaqueEventRef*)
1208 CallNextEventHandler
1208 SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*)
1208 DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*)
1208 HIObject::EventHook(OpaqueEventHandlerCallRef*, OpaqueEventRef*, void*)
1208 HIObject::HandleEvent(OpaqueEventHandlerCallRef*, OpaqueEventRef*)
1208 SendEventToEventTargetWithOptions
1208 SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*)
1208 DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*)
1208 StandardWindowEventHandler(OpaqueEventHandlerCallRef*, OpaqueEventRef*, void*)
1208 HandleMouseEvent(OpaqueEventHandlerCallRef*, OpaqueEventRef*)
1208 SendEventToEventTarget
1208 SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*)
1208 DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*)
1208 HIObject::EventHook(OpaqueEventHandlerCallRef*, OpaqueEventRef*, void*)
1208 HIObject::HandleEvent(OpaqueEventHandlerCallRef*, OpaqueEventRef*)
1208 SendEventToEventTargetWithOptions
1208 SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*)
1208 DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*)
1208 WheelEventHandler(OpaqueEventHandlerCallRef*, OpaqueEventRef*, void*)
1208 HandleWheelMove(long, long, long)
1208 pKGRulerMessage(long, long, KGDictInt*, KGViewRecord*)
1208 pKGPlayerStep(KGPlayerRec*, double, unsigned char, double)
1208 pKGPlayerGoto(KGPlayerRec*, double, long, unsigned char)
1208 pKGPlayerScrubAudio(KGPlayerRec*, double)
1208 KGPlayerScrubAudioFull(KGPlayerRec*, double, KGDictInt*)
1208 pKGAudioMixerDoScrub
1208 pKGAudioSetTransportRate
1208 STTransportStart
1208 STTransport::Start()
1208 STMixer::Start()
1208 AudioUnitGraph::Start()
1208 AudioOutputUnitStart
1208 CallComponentDispatch
1208 DefaultOutputAUEntry
1208 AUGenericOutputEntry
1208 AudioDeviceStart
1208 HALDevice::StartIOProc(long (*)(unsigned long, AudioTimeStamp const*, AudioBufferList const*, AudioTimeStamp const*, AudioBufferList*, AudioTimeStamp const*, void*))
1208 HALPlugIn::DeviceStartIOProc(HALObject const&, long (*)(unsigned long, AudioTimeStamp const*, AudioBufferList const*, AudioTimeStamp const*, AudioBufferList*, AudioTimeStamp const*, void*))
1208 HPHardwarePlugInDeviceStart(AudioHardwarePlugInInterface**, unsigned long, long (*)(unsigned long, AudioTimeStamp const*, AudioBufferList const*, AudioTimeStamp const*, AudioBufferList*, AudioTimeStamp const*, void*))
1208 HPDevice::ExecuteCommand(HPCommand*)
1208 HP_Device::StartIOProc(long (*)(unsigned long, AudioTimeStamp const*, AudioBufferList const*, AudioTimeStamp const*, AudioBufferList*, AudioTimeStamp const*, void*))
1208 HP_IOProcList::StartIOProc(long (*)(unsigned long, AudioTimeStamp const*, AudioBufferList const*, AudioTimeStamp const*, AudioBufferList*, AudioTimeStamp const*, void*))
1208 HP_IOProc::AllocateBufferList(bool)
1208 HPIOProc::AllocateBufferList(HPDevice const&, bool, std::vector<bool, std::allocator<bool> > const&, unsigned long, std::vector<IOBuffer*, std::allocator<IOBuffer*> >&, bool, bool)
1208 IOA_Stream::RegisterIOBuffer(unsigned long, unsigned long, void*)
1208 IOA_HWDevice::RegisterIOBuffer(unsigned int, long, void*, unsigned long, unsigned long)
1208 IOConnectCallMethod
1208 ioconnectmethod
1208 mach_msg
1208 machmsgtrap
1208 machmsgtrap
1208 Thread_2603
1208 thread_start
1208 pthreadstart
1208 select$DARWIN_EXTSN
1208 select$DARWIN_EXTSN
1208 Thread_2703
1208 start_wqthread
1208 _workqops
1208 _workqops
1208 Thread_2803
1208 start_wqthread
1208 _workqops
1208 _workqops
1208 Thread_2903
1208 0x0
1208 0x0
1208 Thread_2a03
1208 0x0
1208 0x0
1208 Thread_2b03
1208 thread_start
1208 pthreadstart
1208 kevent
1208 kevent
1208 Thread_2c03
1208 thread_start
1208 pthreadstart
1208 glvmDoWork
1208 pthreadcondwait$UNIX2003
1208 _semwaitsignal
1208 _semwaitsignal
1208 Thread_2d03
1208 thread_start
1208 pthreadstart
1208 Thread::RunHelper(void*)
1208 DisplayQueue::Run()
1208 Synchronizable::Wait()
1208 pthreadcondwait
1208 pthread_condwait
1208 semaphorewait_signaltrap
1208 semaphorewait_signaltrap
1208 Thread_2e03
1208 thread_start
1208 pthreadstart
1208 Thread::RunHelper(void*)
1208 WorkUnitPerformer::Run()
1208 Synchronizable::Wait()
1208 pthreadcondwait
1208 pthread_condwait
1208 semaphorewait_signaltrap
1208 semaphorewait_signaltrap
1208 Thread_2f03
1208 thread_start
1208 pthreadstart
1208 Thread::RunHelper(void*)
1208 WorkUnitPerformer::Run()
1208 Synchronizable::Wait()
1208 pthreadcondwait
1208 pthread_condwait
1208 semaphorewait_signaltrap
1208 semaphorewait_signaltrap
1208 Thread_3003
1208 thread_start
1208 pthreadstart
1208 Thread::RunHelper(void*)
1208 WorkUnitPerformer::Run()
1208 Synchronizable::Wait()
1208 pthreadcondwait
1208 pthread_condwait
1208 semaphorewait_signaltrap
1208 semaphorewait_signaltrap
1208 Thread_3103
1208 thread_start
1208 pthreadstart
1208 AVS::DestroyAVCDeviceController(AVS::AVCDeviceController*)
1208 CFRunLoopRun
1208 CFRunLoopRunSpecific
1208 mach_msg
1208 machmsgtrap
1208 machmsgtrap
1208 Thread_3203
1208 thread_start
1208 pthreadstart
1208 CAPThread::Entry(CAPThread*)
1208 HALRunLoop::OwnThread(void*)
1208 CFRunLoopRunInMode
1208 CFRunLoopRunSpecific
1208 mach_msg
1208 machmsgtrap
1208 machmsgtrap
1208 Thread_3303
1208 thread_start
1208 pthreadstart
1208 CAPThread::Entry(CAPThread*)
1208 MIO::DAL::RunLoop::OwnThread(void*)
1208 CFRunLoopRunInMode
1208 CFRunLoopRunSpecific
1208 mach_msg
1208 machmsgtrap
1208 machmsgtrap
1208 Thread_3403
1208 thread_start
1208 pthreadstart
1208 ReadSchedulerThreadEntryPoint
1208 TSWaitOnSemaphoreCommon
1208 TSWaitOnConditionTimedRelative
1208 pthreadcond_timedwait_relativenp
1208 pthread_condwait
1208 semaphoretimedwait_signaltrap
1208 semaphoretimedwait_signaltrap
1208 Thread_3503
1208 thread_start
1208 pthreadstart
1208 AIOFileThread(void*)
1208 TSWaitOnSemaphoreCommon
1208 TSWaitOnConditionTimedRelative
1208 pthreadcond_timedwait_relativenp
1208 pthread_condwait
1208 semaphoretimedwait_signaltrap
1208 semaphoretimedwait_signaltrap
1208 Thread_3603
1208 thread_start
1208 pthreadstart
1208 PrivateMPEntryPoint
1208 DecompressFramesMPTask
1208 MPWaitOnSemaphore
1208 semaphoretimedwaittrap
1208 semaphoretimedwaittrap
1208 Thread_3703
1208 thread_start
1208 pthreadstart
1208 PrivateMPEntryPoint
1208 DecompressFramesMPTask
1208 MPWaitOnSemaphore
1208 semaphoretimedwaittrap
1208 semaphoretimedwaittrap
1208 Thread_3803
1208 thread_start
1208 pthreadstart
1208 PrivateMPEntryPoint
1208 DecompressFramesMPTask
1208 MPWaitOnSemaphore
1208 semaphoretimedwaittrap
1208 semaphoretimedwaittrap
Total number in stack (recursive counted multiple, when >=5):
15 pthreadstart
15 thread_start
6 DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*)
6 SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*)
6 pthread_condwait
Sort by top of stack, same collapsed (when >= 5):
machmsgtrap 4832
semaphorewait_signaltrap 4832
semaphoretimedwaittrap 3624
0x0 2416
_workqops 2416
semaphoretimedwait_signaltrap 2416
_semwaitsignal 1208
kevent 1208
select$DARWIN_EXTSN 1208
Sample analysis of process 193 written to file /dev/stdout

Imovie on my ipad ...refuses to recognize AVCHD Video. Also when i remove video clips already used in a project, it is unable to recognize missing clips after I've put them back. How do I get around these 2 issues?

My iMovie refuses to recognize, import, or work with AVCHD Video. It also refuses the same video clips even after I have converted them to Mp4. Also, when I delete a video clip already used in a project, then later import the same clip back to my ipad, the software is unable to recognize and find the clip again! Help! How do I get around these issues?

Hi Craig,
I also got the second problem. The storyboard on iMovie trailer has all these missing videos. If I import them on my iPad it doesn't find them.
If you find a solution it would be much appreciated to share it here ... I'll do the same.
Thanks,
Rafael

Macbook Pro 2008 hangs when running video on nvidia 9400M

My MBP (2.4GHz unibody) freezes whenever I run youtube videos for a few minutes. Resetting the PRAM and SMC didn't solve the problem. It seems to happen more often when running on batteries rather than plugged in.
This MBP model has two graphic cards integrated. By default it runs on the nvidia 9400m. I haven't had the problem since switching over to the 9600M (crossing fingers) although the laptop does run a lot hotter now and I really don't need the extra graphics boost given by the 9600M.
Has anyone else had this problem?
I don't know if it makes any difference but I purchased the computer from a reseller with extra RAM (4GB total). It has all the latest updates and minimum extra software (it's brand new).
Message was edited by: kookahunter

Try downloading this video to see if it plays properly.
http://www.apple.com/macbook/the-new-macbook/
If the video that you have downloaded plays properly, then I would think that the issue is related to your Internet service.
If the video that you have downloaded plays poorly, then I would contact Apple to try to have it exchanged or serviced.
PS:
Does the video hang when you watch the live stream at the following URL? You may need Adobe Flash player to view this site.
http://live.pirillo.com
Message was edited by: LukeD

Please help. When exporting a 720p video using Quicktime Conversion in FCP it saves some extra temporary files to my computer. The file is called ICMMultiPassStorage. This file gets so large that eventually the program and exporting process crashes.

Please help. When exporting a 720p video using Quicktime Conversion in FCP it saves some extra temporary files to my computer. The temporary file it saves is called ICMMultiPassStorage. This file gets so large that eventually the program and exporting process crashes. I have been able to locate the file using GrandPerspective and close out of FCP to delete it. But when I try exporting the movie again it creates the ICMMultiPassStorage file again. I have made sure my scratch disks are set to my external hard drive so I know that isn't the issue. How do I fix this problem so these temporary files are not being stored on my internal hard drive instead of my external?Thanks!

Try exporting the timeline "using current settings" via Make QuickTime Movie, then submit that clip to Compressor for the transcode. This should be faster and less painful.

PSE13: no sound when playing AVCHD videos

In the PSE 13 Organizer I'm not getting any sound when playing AVCHD files:
These files play just fine in PSE12
These files play just fine in Premiere Elements 13 and 12
The files are from various cameras (Sony RX100M3, Sony and Panasonic camcorders)
Other video formats work fine (e.g., .wmv, .mov files from an iPhone, .avi etc)
Any ideas? A quick search indicates this problem has occurred occasionally over the last several years across various versions of PSE.
Thanks

Hi Anewsha
I use .mts.
To clarify : The problem occurs in the organizer part, where sound
disappears after palying 30 seconds. I run a fairly powerful computer, Core
i7, 16 G Memory with NVIDIA GeForce GTX 750
BR Ulf
2015-02-11 16:02 GMT+01:00 yossi000 <[email protected]>:
PSE13: no sound when playing AVCHD videos created by yossi000
<https://forums.adobe.com/people/yossi000> in Photoshop Elements - View
the full discussion <https://forums.adobe.com/message/7184570#7184570>

Bug: Lightroom 3.3 hang when importing video

On Windows, Lightroom 3.3 will hang when importing .AVI videos when the following is true:
- Move or Copy (not Add)
- Rename Files is selected
- Filename pattern includes "exposure"
Changin to a pattern that only includes date and time will make the import succeed.

If it really failed in ntdll.dll it might be a system issue. Make sure you disable all real-time anti-virus processes, and make sure your Windows system is up-to-date.
Otherwise, it will be hard to know what is going on. If it persists, open a support ticket with Adobe. Take a look in the event viewer to make sure you have all the details of the crash.

FCP hangs when speeding up AVCHD video.

Similar Messages

Maybe you are looking for