FCPX 10.0.6 appears to have bugs with Compound Clips

Just a warning -- I upgraded to 10.0.6 and am finding annoying problems with the handling of Compound Clips. After any non-trivial editing of Compound Clips, FCPX will just stop rendering most of your video. You will just see a black screen, occasionally with some of your titles or shapes, but the bulk of the video is suddenly not rendered any more. Sometimes you can see it briefly in flashes inbetween black screens if you frame advance with right-arrow. But the only way to get out of this situation that I have found so far is to completely exit and re-enter FCPX. Which is really tedious and annoying to have to do this every time you edit the contents of a Compound Clip.
A secondary note: Beware -- they significantly changed the behavior of Compound Clips. Compound Clips are now "linked" so if you aren't aware of this change and do something like copy and paste a Compound Clip, then innocently edit one of the pasted Compound Clips, you will unknowingly change them all. Perhaps a nice feature, but if you don't realize this change was made, and you go about doing what you used to do, you will waste some time because you will destroy all those linked Compound Clips since you didn't know they are all now linked. Kind of amazing that they would just change the behavior like this and make the new behavior the default. If you're being nice to your users, you usually try to make things work compatibily with how they worked before, requiring you to do something different to get the new behavior. I guess I learned that I better read the release notes carefully before upgrading because who knows what behavior may have changed.

After spending some time on the Phone with support, we concluded that this FCPX project has been corrupted in some unrecoverable way which caused the black screen problems with Compound Clips. I will need to rebuild the project from scratch. Whether it was corrupted by the new version or it is a coincidence that it became corrupted right about the same time is not known.

Similar Messages

K7tpro(6330) BIOS have BUGs with Geforce2 GTS on linux !

MSI K7T Pro (6330) motherboards working with Geforce2 GTS GPU can't load driver correctly on linux !
I use the newest SBIOS v3.6 and the newest GPU driver NVIDIA-Linux-x86-1.0-7184, While loading driver It report:
Code: [Select]
nvidia: no version for "struct_module" found: kernel tainted.
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
NVRM: request_mem_region failed for 496M @ 0xe0ffffff. This can
NVRM: occur when a driver such as rivatv is loaded and claims
NVRM: ownership of the device's registers. nvidia: probe of 0000:01:00.0 failed with error -1
NVRM: The NVIDIA probe routine failed for 1 device(s).
NVRM: None of the NVIDIA graphics adapters were initialized!
I contacted with Nvidia's supporter, They say, If report "request_mem_region failed for 496M @ 0xe0ffffff" that's bec. of motherboard's System BIOS have Bugs, more details on:
http://www.nvnews.net/vbulletin/showthread.php?t=80587
(include all system information and error report )
When MSI could update 6330's BIOS ?

My Geforce card is running well on win32 system. So It will be in order.
I use the offical FC4 release, also the kernel is FC4's release version 2.6.11-1.1369_FC4. The Nvidia's driver is recompiled with Kernel's(2.6.11-1.1369_FC4) source, So there is no compatibility problem. There is no problem on compile-time, But errored while loading nvidia.ko.
As I know MSI-6330 had BIOS peoblem working with Geforce card historically, According to the BIOS update notes:
e.g.: on 2000-09-13 relaseed v1.5 BIOS to fix problem on Geforce 256 and MX card
e.g.: on 2001-08-03 released v2.9 BIOS to fix problem on Geforce2 AGP card ( I use this card )
So It already released serval BIOS updates up to v3.6, I'm afraid there are some hidden problems.
Quote
You are sure the Geforce card is in order? Especially the memory chip?
Please also say what parts you have in the system.

HT1369 my 5th generation nano appears to have frozen with the apple logo appearing continually. It will not switch off and is not recognised any more on my computer.

My 5th generation nano appears to have frozen. It only shows the apple logo and will not switch off. It is also now not recognised by my computer. I have downloaded the latest itunes but that has made no difference.
Any suggestions?

Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
Fixing an iPad Home Button
http://tinyurl.com/om6rd6u
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

Security update appears to have issues with DKIM support

I noticed this in the logs this morning after installing the security update..
Apr 19 08:14:03 org.amavis.amavisd[41]: fetch_modules: error loading optional module Mail/SpamAssassin/Plugin/DKIM.pm:
Apr 19 08:14:03 org.amavis.amavisd[41]: Can't locate Mail/DKIM.pm in @INC (@INC contains: /Library/Perl/Updates/5.10.0 /System/Library/Perl/5.10.0/darwin-thread-multi-2level /System/Library/Perl/5.10.0 /Library/Perl/5.10.0/darwin-thread-multi-2level /Library/Perl/5.10.0 /Network/Library/Perl/5.10.0/darwin-thread-multi-2level /Network/Library/Perl/5.10.0 /Network/Library/Perl /System/Library/Perl/Extras/5.10.0/darwin-thread-multi-2level /System/Library/Perl/Extras/5.10.0) at /System/Library/Perl/Extras/5.10.0/Mail/SpamAssassin/Plugin/DKIM.pm line 60.
Apr 19 08:14:03 org.amavis.amavisd[41]: BEGIN failed--compilation aborted at /System/Library/Perl/Extras/5.10.0/Mail/SpamAssassin/Plugin/DKIM.pm line 60.
Has anyone else seen this and know what broke? Cursory investigation looks like a Perl version mismatch and somebody in build land at Apple didn't catch it?

The issue is that amavisd-new got updated to 2.6.4, whereas a stock install of 10.6 server had an older version of amavisd, amavisd-new 2.5.1
See http://www.ijs.si/software/amavisd/release-notes.txt
search for:
amavisd-new-2.6.0 release notes
and see the information about introduction of DKIM signing and verification.
So what's happening now is that amavisd is attempting to load DKIM features.
So - since you haven't demonstrated any information about attempting to pursue this matter on your own, it's probably best to just disable it for now. Because it's something you weren't using previously, and so you probably aren't going to miss it for now.
Edit amavisd.conf (please don't use a GUI editor, go with nano or vi) and add:
$enabledkimverification = 0;
$enabledkimsigning = 0;
save the change and ensure the permissions are still good on your amavisd.conf file.
Stop mail services wait 30 seconds and start mail services again.

My synchronized clips (audio and video) have lost their compound clip icon after I bought the full version of FCP X, why is that?

I have noticed a few changes to my FCP workflow after installing FCPX from the trial version I had before. I've noticed that when I sync audio and video files together via Clip > Synchronize Clips.. the icon at the top left corner of the thumnail is no longer there as it was in the trial version. I also have to right click and select 'open in timeline' to work on the files. I much preferred clicking on the thumnail's icon in the event library and it opening up in the timeline. Also Stabilization is missing from my video effects! How odd.

I no longer have the trial version this is the point. Bought the 'release' version about 6 weeks ago. Still doesn't explain why the stabilization option randomly appears for some clips and not for others. Also would like to know if I can get the compound icon back on the thumbnails for synchonized clips.

Bugs with iOS 4.0.1?

I'm having trouble saving the changes I made to my note. It seems to me that iOS 4.0.1 may have bugs with the "Notes" software.

I posted on this topic in another thread and I think I have an answer for you. Here's the thread with my solution:
http://discussions.apple.com/thread.jspa?threadID=2530080&tstart=0
My brother's iPhone had this issue. We solved his problem. Hopefully this info will help you with your problem.

Okay, i have 2 bugs with maverick. First, when I delete a file within a window, the files deletes but the preview doesn't delete until I close the window and reopen it. Second, I work on a network of computers and the search feature is now buggy...

Okay, i have 2 bugs with maverick. First, when I delete a file within a window, the files deletes but the preview doesn't delete until I close the window and reopen it. Second, I work on a network of computers and the search feature is now buggy... When I search for a file, A) it asks me if it's a name, or it wont produce anything, and B), its slower than in prior OS versions and in some instances I have to toggle to a different directory and go back to my original directory in the search: menu bar or the search wont produce anything... Very buggy.

It appears to me that network file access is buggy in Maverick.
In my case I have a USB Drive attached to airport extreme (new model) and when I open folders on that drive they all appear empty. If I right click and I select get info after a few minutes! I get a list of the content.
It makes impossible navigate a directory tree.
File access has been trashed in Maverick.
They have improved (read broken) Finder. I need to manage a way to downgrade to Lion again.

In iPhoto most of my photos appear to have been replaced by much smaller versions. What has happened and how can I get the full size photos back?

In iPhoto most of my photos appear to have been replaced by much smaller versions. What has happened and how can I get the full size photos back?

That is either a bug in Firefox 5 or the script has a problem with Firefox 5.<br />
It works in all other Firefox versions like Firefox 3 and 4 and 6 (Aurora) and 7 (Nightly).

I have problem with account that i can't make update or buy from app store There is massage appear in my payment page that i must contact with i tunes support to complete this transaction Please help me to fixe this problem as soon possible Hany hassan 00

I have problem with account that i can't make update or buy from app store
There is massage appear in my payment page that i must contact with i tunes support to complete this transaction
Please help me to fixe this problem as soon possible
Hany hassan
0096597617317
0096596677186
Thank you

You need to Contact iTunes Support...
Apple Support iTunes Store Contact Us

Hello I don't know who to complain to as you do not appear to have a complaints department, despite searching the web, I trust you can pass this to relevant department for action, as I'm very angry over my recent repair. Following my issue relating to a

Hello
I don't know who to complain to as you do not appear to have a complaints department, despite searching the web, I trust you can pass this to relevant department for action, as I'm very angry over my recent repair.
Following my issue relating to a blank screen 2 weeks ago, your advisor arranged for my iMac to collected by Amsys, for repair and return, this was done and it was returned to me last Tuesday, onWednesday I set up my iMac again and instantly realised I had problems, much worse than before. I called Amsys to inform them of the issue of the computer being very very slow and unable to open iPhoto and pages, and document listing would not show up, plus I had no sound on the mac.They informed me that they had only replaced the video card and what they had done would have not affected the computers performance. He suggested I reinstall OSX again which I did, but this made no difference to the programs, so I called you.
Your technician on the phone was very good as they have always been, and made an appointment for me to go into the Milton Keynes Apple store the next day at 1 pm, which I did.
The gentleman on the Genius Bar was very good and was able to run tests on the iMac in my presence, and diagnosed immediately an issue with the sound problem, and advised me that this could not be fixed while I wait and I would need to leave it for repair. I made him aware of the previous repair, and he was able to see via your system, the list of logged issues I have had with this since purchasing in September 2012. I'm sure you can see from the way you record all calls and issues the problems I have had.
Today I called to ask if my iMac would soon be ready for collection, I was told the repairs had been completed and it was being tested. However to my dismay, I learned of another serious issue relating to the repair carried out by Amsys. I was informed that 6 screws were missing from the the iMac internally, which caused me much distress and concern, they also told me I had to wait even longer as the screws had to be ordered and installed on arrival before I could collect it.
My issues here are: I trusted the Amsys repairer as it was arranged and recommend by you, it is very evident they are not competent to repair, as they have caused more problems with my iMac on its return, despite enclosing a checklist, fully ticked showing everything working well, it clearly wasn't ! Plus the issue of missing parts (screws) during the repair, I have already expressed my disgust with Amsys, by email and had a response, within the hour, apologising and told me they were looking into this.
This where I stand on this, I have not had my iMac for almost two weeks and I do not know when I will get it back. I'm also very worried about what other damage has been caused by Amsys and the quality of my iMac now. I want to know what you, Apple is going to do about this ? I have already been very inconvenienced by this and until now I have been a very loyal apple customer with 2 iPads, and 4 iPhones in our household, not to mention the iMac.
I feel I have been very let down by this experience, on my iMac, which cost a lot of money, I have also lost a lot of money with lost work and unable to carry out my business without it, and I will be seeking compensation.
I trust you will take this complaint seriously and pass it to the relevant department for action.
Yours sincerely
Des Withey
Sent from my iPad
On 26 Feb 2014, at 11:44, Apple Support <[email protected]> wrote:
Thanks for contacting us.
Thanks for contacting Apple Support. If you need more help later, you can open the case below or start a new support request online.
Case ID:
Open this case
Sincerely,
Apple Support
Get help online
Visit Apple Support to learn more about your product, download software updates, and much more.
Join the conversation
Find and share solutions with Apple users around the world.
TM and copyright © 2014 Apple Inc. 1 Infinite Loop, MS 96-DM, Cupertino, CA 95014.
All Rights Reserved / Privacy Policy / Apple Support / Give us feedback
On behalf of Apple Distribution International

Call Apple Customer Relations - 1-800-275-2273. Ask politely & firmly that you want to be transferred to Customer Relations. Tell them exactly what you stated in your post.
GOOD LUCK!
These are user-to-user forums where everyday folk (volunteers) post questions and offer answers (technical support) to each other.

Continuous Disconnections "Appear" To Have Stopped...

BACKGROUND (cutting a VERY long story "long") [skip to the next section if you're bored to tears]:
- With BT Broadband since early February. Had continuous disconnections since joining, which added to the dreaded DLM from BT resulted in ever-slow speeds (at some popint we wre under 0.1 Mbps)
- Previously with Virgin Media BroadBand + BT line rental. We never had any issues of disconnections or slow speeds. Couldn't fault VM (except that they got riff of their BB customers to focus on Fibre services not available in our area).
- The first-tier of Customer Services are all very polite people but, frankly, have been of no help at all. Countless line checks were made, mostly "concluding that the line was OK and the connection stable". Well, one only had to check the Event Logs, which would soon be out of memory within a day, showing disconnection after disconnection.
- The second-tier could not help also and finally decided an engineer had to call at the property.
- The engineeer failed to show up.
- The engineer visit was rescheduled, the engineer did show up. He confirmed our internal installation is OK, put the onus on some
work needed "down a manhole in a road nearby" and that a different team had to take over.
- As far as I am aware, this work had been seen to (although I initially had my doubts: BT phone services told me "everything (was) sorted now" whilst I was tearing out my hair with the same problems and speeds under 0.1 Mbps
- I *think* that my profile was reset once or twice by now, our speeds would get about 6 Mbps, rapidly dropping after
disconnections.
- I have noticed BB disconnections when using the internet on my Pc but ALSO when the PC was off and there was no wired or wireless use whatsoever.
- BT KEEPS CLOSING UP THE FAULTS I OPEN & RE-OPEN (HOW VERY CONVENIENT!) OUR FAULT HAS BEEN PRESENT FOR NEAR 3 MONTHS NOW, IS THAT TOO EMBARRASSING TO DISPLAY IN bt.com/fault?
- Online complaint filed... Ignored by BT.
- 3-page letter of complaint sent to BT... Got an awfully generic reply: "Hopefully you know by now what BT is doing to sort this problem" I DO ACTUALLY KNOW... THEY ARE DOING ABSOLUTELY NOTHING! BT gave an email address to reply: I replied 7 days ago asking what's going on, now have re-sent the e-mail (2 days ago): Nothing. MAYBE THE SUPPLIED OMBUDSMAN CONTACT WILL NEED TO BE USED NEXT?
- I keep being promised refunds of line rental, etc. These are yet to materialize as "I will get this when the fault is solved". This of course works on the assumption that my fault will EVER be solved. ALL I REALLY WANT IS: SORT THIS NEVERENDING FAULT.
- Oh, and BT Direct Debit was increased to more than advised (yes, our experience was dreadful so far in ALL aspects) - We are dealing with this separately, DD has now been now reduced... I'm looking forward to the next quarterly bill to confirm I'm not being overcharged (I've honestly lost all trust in all things BT).
- I am an engineer myself and the kindest assessment of the situation would be that BT Customer Services are applying ZERO LOGIC in trying to sort this problem.
CURRENT SITUATION:
- BT Customer Services appear to be avoiding us. They did not call us back to follow up the case and frankly, I am very busy these days and have little time to engage in another gruelling wait + futile conversation (typically near an hour in total) to get absolutely nowhere.
- Stable connection for almost 7 days now.
- Speed capped at 2 Mbps, actual speed is 1.4 to 1.5 Mbps (and has been so for at least 4-5 days).
Onto the technical stuff........
OUR CONNECTION:
- Wired (ethernet) to desktop PC.
- Hub4 Connected to test socket of NTE5, using supplied filter.
- Only one phone connected, via the same filter at the main (test) socket.
- At different times during troubleshooting (weeks ago), I took to, one by one, changing the filter, the ethernet cable and the phone cable supplied by BT. I also changed to different ethernet ports of the Hub, no joy... None of this made any difference so all original cables and filter are again in place.
- The engineer neglected to check the HUb, convinced it was a line problem. Over a month ago, I temporarily replaced the Hub with an old Netgear supplied by Virgin. At that time this made no difference but then the disconnection rate was appalling and wonder if there was an actual fault in the line now and now this stabilized? Regardless, I've been thinking whether my old Netgear would perform better but I have been patient and trying to build up more days of stable connection... BUT 6 days+ of solid connection and I'm still at 1.4 Mbps????
- There are NO other phones or telephone extensions at the property.
- We occasionally use our mobile phones via wireless. Wireless connection is fine (when main connection is present, of course)
Hub "Helpdesk" Info:
1. Product name:   BT Home Hub
2. Serial number:   +068340+NQ44321122
3. Firmware version:   Software version 4.7.5.1.83.8.130.1.17 (Type A) Last updated Unknown
4. Board version:   BT Hub 4A
5. ADSL uptime:   6 days, 15:01:52
6. Bandwidth:   96 / 1888
7. Data sent/received:   229.6 MB / 3.5 GB
8. Broadband username:    [xxedited_out_xx]@btbroadband.com
9. BT FON:   No
10. 2.4 GHz Wireless network/SSID:    [xxedited_out_xx]
11. 2.4 GHz Wireless connections:   Enabled (802.11 b/g/n (Recommended)) 20 MHz, WPS enabled
12. 2.4 GHz Wireless security:   WPA and WPA2
13. 2.4 GHz Wireless channel:   Automatic / 6
14. 5 GHz Wireless network/SSID:    [xxedited_out_xx]
15. 5 GHz Wireless connections:   Enabled (802.11 n 40 MHz (Recommended)) 20/40 MHz, WPS enabled
16. 5 GHz Wireless security:   WPA2
17. 5 GHz Wireless channel:   Automatic / 40
18. Firewall:   Default
19. MAC Address:   d0:84:b0:e4:51:c6
20. VPI/VCI:   0 / 38
21. Modulation:   G.992.1 Annex A
22. Latency type:   Interleaved
23. Software variant:   -
24. Boot loader:   -
Noise Rates Margin and Line Rates of last "events" at the time of last noted disconnections (Note log dates, no updates since 15 April, when last disconnections occurred):
04:50:49, 15 Apr.   (611767.630000) DSL noise margin: 7.00 dB upstream, 1.20 dB downstream
04:50:49, 15 Apr.   (611767.560000) DSL line rate: 96 Kbps upstream, 1888 Kbps downstream
04:48:38, 15 Apr.   (611636.000000) DSL noise margin: 28.00 dB upstream, 15.10 dB downstream
04:48:38, 15 Apr.   (611635.920000) DSL line rate: 448 Kbps upstream, 7168 Kbps downstream
04:48:04, 15 Apr.   (611602.640000) DSL noise margin: 13.00 dB upstream, 15.20 dB downstream
04:48:04, 15 Apr.   (611602.560000) DSL line rate: 448 Kbps upstream, 1408 Kbps downstream
04:45:30, 15 Apr.   (611448.390000) DSL noise margin: 28.00 dB upstream, 15.20 dB downstream
04:45:30, 15 Apr.   (611448.320000) DSL line rate: 448 Kbps upstream, 7808 Kbps downstream
04:45:06, 15 Apr.   (611423.970000) DSL noise margin: 14.00 dB upstream, 14.80 dB downstream
04:45:06, 15 Apr.   (611423.900000) DSL line rate: 448 Kbps upstream, 1536 Kbps downstream
BT Availability Checker:
Telephone Number [xx_edited_out_xx] on Exchange LYNDHURST is served by Cabinet 6
Featured Products / Downstream Line Rate(Mbps) / Upstream Line Rate(Mbps) / Downstream Range(Mbps) / Availability Date
ADSL Max    Up to 8    --    7 to 8    Available
Fixed Rate    2    --    --    Available
BTWholesale Speed test:
1. Best Effort Test: -provides background information.
Download Speed: 1.47 Mbps
Max Achievable Speed: 2 Mbps
Download speedachieved during the test was - 1.47 Mbps
For your connection, the acceptable range of speeds is 0.4 Mbps-2 Mbps.
Additional Information:
Your DSL Connection Rate :1.89 Mbps(DOWN-STREAM), 0.1 Mbps(UP-STREAM)
IP Profile for your line is - 1.5 Mbps
Questions/Comments:
- I thought it took 3 to 5 days of solid connection for broadband speed to be bumped up? How long should I now wait???
- Does my IP profile need to be reset? (Note: I'm dreading that this will again result in 1-2 days of 6Mbps, followed by disconnections, followed by unusable sepeeds again, as this pattern a few times now).
- Last DSL noise margin stats : "7.00 dB upstream, 1.20 dB downstream"... Any comments on this? Isn't 6 dB considered normal, and the lower this figure the better?
- Can anyone help here before we abandon all hope, stop paying our bill and complain to Trade Standards/Ombudsman/etc??

@ imjolly: Many thanks.
I set the alarm 5 minutes early in order to restart the Hub this morning. Do I believe in coincidences? Sometimes... After 7 days of solid connection, several restarts occurred while my PC was off (Hub's always on) in the early hours of this morning.
As such, I was correct in my cautiousness when naming the thread "Disconnections APPEAR To Have Stopped... " and I am now able to offer new stats without any manual intervention:
06:06:35, 22 Apr.   ( 6977.200000) DSL noise margin: 16.00 dB upstream, 15.00 dB downstream
06:06:35, 22 Apr.   ( 6977.130000) DSL line rate: 448 Kbps upstream, 2272 Kbps downstream
06:03:52, 22 Apr.   ( 6814.210000) DSL noise margin: 15.00 dB upstream, 15.00 dB downstream
06:03:52, 22 Apr.   ( 6814.140000) DSL line rate: 448 Kbps upstream, 2176 Kbps downstream
06:01:57, 22 Apr.   ( 6698.960000) DSL noise margin: 16.00 dB upstream, 14.90 dB downstream
06:01:57, 22 Apr.   ( 6698.890000) DSL line rate: 448 Kbps upstream, 2176 Kbps downstream
06:00:35, 22 Apr.   ( 6616.720000) DSL noise margin: 27.00 dB upstream, 15.10 dB downstream
06:00:35, 22 Apr.   ( 6616.650000) DSL line rate: 448 Kbps upstream, 7808 Kbps downstream
05:53:58, 22 Apr.   ( 6219.650000) DSL noise margin: 15.00 dB upstream, 15.00 dB downstream
05:53:58, 22 Apr.   ( 6219.580000) DSL line rate: 448 Kbps upstream, 2176 Kbps downstream
05:39:17, 22 Apr.   ( 5339.020000) DSL noise margin: 16.00 dB upstream, 15.00 dB downstream
05:39:17, 22 Apr.   ( 5338.950000) DSL line rate: 448 Kbps upstream, 2208 Kbps downstream
05:38:52, 22 Apr.   ( 5314.130000) DSL noise margin: 11.00 dB upstream, 24.80 dB downstream
05:38:52, 22 Apr.   ( 5314.060000) DSL line rate: 448 Kbps upstream, 3072 Kbps downstream
04:11:23, 22 Apr.   ( 64.660000) DSL noise margin: 11.00 dB upstream, 14.90 dB downstream
04:11:23, 22 Apr.   ( 64.500000) DSL line rate: 448 Kbps upstream, 1952 Kbps downstream
Prior to disconnections I note in the main log entries like this one:
04:09:57, 22 Apr.   (1214109.300000) PPP LCP Send Termination Request [User request]
"User request" is not at all MY request... Does this indicate any manual intervention from BT? (I expect not, but I'm only curious). May post full logs if required.
Thanks in advance for any help.

I have just downloaded a free app and there is no icon and it will not open from the list even tho it appears to have downloaded and the "open" button is available. Does not show up when I search for it. Plenty of memory . . .

I Have an iPad mini running iOS 7.1.2, I downloaded a new app and it's icon does not appear anywhere ( have ~ 180 apps so not at limit) and it won't open from the purchased apps list. It does not show up when I search for it so can't open t that way either. It doesn't require iOS 8. Can't delete and reinstall, cause not icon. This is not a normal "app won't open" question. it doesn't start the. Stop it just doesn't seem to exist. Any help is appreciated

Hello Chelleuri,
Thank you for using Apple Support Communities.
The following article provides information to trroublehshoot issues with installed apps, including not opening.
iOS: An app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
Regards,
Jeff D.

Help please - have a Nano and a Shuffle and neither are working! The Nano wheel appears to have stopped working - I can't get it to do anything. I've done the reset,it worked the first time but not since. And the shuffle won't sync with my library!

Hi,
I have an iPod shuffle 4th generation and an iPod Nano 5th generation . The Nano wheel appears to have stopped working - I can't get it to play or anything. I've done the reset and it worked the first time, but now the only way I can get it to play anything is to shake it and go with the shuffle choices - I can't change volume, song, pause or turn it off.
So, I decided to start using the Shuffle which I was given as a present last year. I've plugged it into my laptop (running windows 8 and newest version of iTunes). It appears in iTunes on the left hand side, but when I click to sync (whether I tick sync all or choose artists) it says synched but has no music. It seems to not be linked to the music library - when I tick synch all songs, next to the "sync music" it says 0 songs?
Any help to fix either would be really appreciated - I'm without any music at the moment and I'm going away this weekend!
Thanks

Hi Bblairjones,
If you are having issues with your Nano and Shuffle, you may want to try the Troubleshooting Assistants on the following page:
Apple Support: iPod Troubleshooting Assistants
http://www.apple.com/support/ipod/five_rs/
Regards,
- Brenden

Service Pack 3 appears to have broken the Report Builder click once installation

We are running SQL Server reporting services on SQL Server 2008 R2. Recently we installed the service pack 3 and we now get the following error when a user clicks the Report Builder link:
Application validation did not succeed. Unable to continue.
And from the Log:
ERROR DETAILS
Following errors were detected during this operation.
* [10/14/2014 9:04:32 AM] System.Deployment.Application.InvalidDeploymentException (HashValidation)
  - File, Microsoft.ReportingServices.ComponentLibrary.Controls.dll, has a different computed hash than specified in manifest.
  - Source: System.Deployment
  - Stack trace:
   at System.Deployment.Application.ComponentVerifier.VerifyFileHash(String filePath, Hash hash)
   at System.Deployment.Application.ComponentVerifier.VerifyFileHash(String filePath, HashCollection hashCollection)
   at System.Deployment.Application.ComponentVerifier.VerifyComponents()
   at System.Deployment.Application.DownloadManager.DownloadDependencies(SubscriptionState subState, AssemblyManifest deployManifest, AssemblyManifest appManifest, Uri sourceUriBase, String targetDirectory, String group, IDownloadNotification
notification, DownloadOptions options)
   at System.Deployment.Application.ApplicationActivator.DownloadApplication(SubscriptionState subState, ActivationDescription actDesc, Int64 transactionId, TempDirectory& downloadTemp)
   at System.Deployment.Application.ApplicationActivator.InstallApplication(SubscriptionState& subState, ActivationDescription actDesc)
   at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String& errorPageUrl)
   at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state)
I'm at a bit of a loss of what to do since all recommended solutions I've found are for installing the latest service pack or cumulative update (from threads several years old). By installing service pack 3 we are at the latest upgrade path for 2008
R2 and ironically enough, this is what appears to have broken the click once installer.

Hi Matt,
This is an known issue in SSRS 2008 R2 SP3. For this issue, Microsoft has published an article addressing this issue. It is not planning to release a fix for this defect. But there's workarounds for this issue. Please refer to the link below:
Report Builder of SQL Server 2008 R2 Service Pack 3 does not launch.
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

My Mail programme appears to have locked up. It's showing as open in my doc but in reality I can't open it and it won't quite. If I try to shut the machine down it tells me that I need to quite mail but I can't! Any hints please?

My Mail programme appears to have locked up. It's showing as open in my doc but in reality I can't open it and it won't quit. If I try to shut the machine down it tells me that I need to quit Mail but I can't! Any hints please?

Open  > Force Quit and press Mail

FCPX 10.0.6 appears to have bugs with Compound Clips

Similar Messages

Maybe you are looking for