FD10N and FBL5N Reports are not matching

Hi,
When i execute FD10N FBL5N reports for customer balance, Both are showing different balances, why they are not matching with each other?
My FBL5N open item blance is not matching with FD10N.what could be the reason?
Is there any other report to show customer opening balances other than FD10N?
thaanks

Dear Dogdays
This is selection parameters problems- means please check once again what you selected check boxes  and also check for Dates what you given
To check both the above cases, FD10N for the year you see the difference. Double click on the balance value for the period where you have seen the difference. The double click will call FBL5N for the period and customer. If the total of the line item report matches the balance in FD10N, then the issue is selection criteria
Regards
shankar

Similar Messages

  • Reports are not matching

    Hi,
    There is a reporting problem with one of our projects. We use reports S_ALR_87013542 (Display Actual Cost Line Items for Project) and CN41(Structure Overview). The balance being displayed by these two reports are not matching. Why the different amounts are showing up in these two reports and how do I find out the correct amount which still remains in the Project.
    Your suggestions/inputs will be highly appreciated.
    Regards,
    Bala

    Hi,
    Thanks for your inputs. I have 2 queries here...
    1. Whether the reports S_ALR_87013542 & CN41 are same displaying the same information?
    2. How can I check the Balance amount still remaining in the project? Is there any report?
    Thanks & regards,
    Bala

  • Open Item and Line Items are not matching

    Hi Gurus,
    I ran the EFT for vendor #1600109 for payment on 10/18/07.  If I run the vendor open items report (ZFI019) for today, it shows the balance net of the EFT that is $203,466 ( $263869 - EFT Value is $60,403). 
    When I ran the vendor line items display (FBL1N), it shows all the invoices including the invoices paid on the Oct 18 EFT $263,869 which is (2034,66+60,403). 
    User wants the open item report should tally the line item display.
    I will assign good points.
    Thanks for your help
    Prashanth

    Hi Gurus,
    EFT is working fine. But the Vendor Open item Report (Custom Report) and Vendor line item report (FBL1N) is different.
    We are looking a balance for a vendor as on 15th where the balances are not matching between the reports but if i run FBL1N on 18th the balances are matching.
    Clearning date is 18th
    Posting Date is 15th.
    Thanks
    Prashanth

  • ETD and Base line are not matching

    Hi All,
    My requirement is in production server, for some invoices the Expected time departure and base line date are not matching,
    What will be the reason behind this? Can you please advice how to approach to this problem.?
    Thanks in advance
    jaya.G

    Hi,
    could you please eloborate the issue?
    Thanks,
    Srinu

  • In 27q form Amount deducted and amount payable are not matching

    Dear All
    Here we made a z programm for form 24 qa as zf24q.But what is happening means in the excell the Amount Tax deducted and Tax deposited is showing correctly but in display these two amounts are not matching.so kindly give any suggestion for me
    Regards
    lakshman

    not answered yet.

  • DB Connect DataSource PSA records and DSO records are not matching...

    Dear All,
    I'm working with SAP NetWeaver BW 7.3 and for the first time, I have loaded from Source System DB Connect. I have created a DataSource and pulled all records and found 8,136,559 records in PSA. When I designed and created DSO with Key Fields 0CALDAY, Item No and Company Code, it has transferred records about 8,136,559 and added records about 12,534 only. Similarly following InfoCube has about 12,534 records into its Fact table. When I tried to reconcile the data/records with source DBMS for a month, the records/data could not matched?
    1. What could be the reason behind the issue? why I am unable to load the records/data correctly?
    2. Have I not mentioned the Key Fields of DSO in a correct manner?
    3. Is it possible to load the records/data into DSO without giving any field as Key Fields?
    4. How should I resolve this issue?
    5. Is it could be of DSO Overwrite and summation function utilization if yes, then how to utilize it?
    Many thanks,
    Tariq Ashraf

    Dear Tariq,
    1. What could be the reason behind the issue? why I am unable to load the records/data correctly?
    Ans:  Check transformation once. Is there any start routine you have used or direct assignments. What kind of DTP settings you have done.
    Check the messages at the DTP monitor. You will surely find some clue. Any duplicate records are being detected or not check once if you are using semantic keys in your DTP.
    2. Have I not mentioned the Key Fields of DSO in a correct manner?
    Ans:  The transformation key and the DSo key are they same in your case?
    What kind of DSO is it? Like for sales order DSO you take Order number as a key field., So you have to define the key fields according to business semantics I suppose. Do you agree?
    3. Is it possible to load the records/data into DSO without giving any field as Key Fields?
    Ans:  I dont think so as the keys you defined will help in having unique data records isnot it?
    4. How should I resolve this issue?
    Ans: Please check the above as in Ans:1 please share your observation.
    5. Is it could be of DSO Overwrite and summation function utilization if yes, then how to utilize it?
    Ans: DSO overwriting of key figures is useful when you have full loads in picture. Are you always going to perform full loads ?
    For reference would you like to check this thread:  Data fileds and key fields in DSO
    Lets see what experts give their inputs.
    Thank You...

  • Netflow is not showing on prime infra 1.2 and also reports are not generating

    Hi friends,
    I add my router to cisco prime for netflow and configured it by temelate as mentioned by cisco in deployment guide. I got netfloe till last friday but today i am getting anyflow on prime.
    second I am not able to generate raw netflow.
    how can i removed any device from data sources ifthis is nolonger present there. for better understanding i am also ataching the snapshot.

    Hi,
    Thanks
    Yes I have configured the command “aaa accounting exec default start-stop group tacacs+”
    As I have mentioned all the other reports are working. Which user and when he has logged in and what commands he has used. Only the TACAS+ Accounting and logned user is not working.
    Regards,
    Vineet

  • Requirement quantity and quantity withdrawn are not matching

    From a production order the requirement quantity of one component is 4 and for another component, it is 2. But the withdrawn quantity for the first component is 5 and for the 2nd component it is 0. This has caused a COGI error.
    Also the total quantity and the delivered quantity is shown as 6.
    How can this be corrected and prevented from happening in the future.

    Hi Jeby,
                Thanks very much for your reply.
    Batch management is not used for both the components.
    For both the components the storage location is mentioned in the components overview of the production order. When I checked in the material master the same storage location is existing in the materiala master also

  • Refreshed universe and now reports are not working

    I added Restricked key figures and calculated key figures and I when I run my webi report I get this error message:
    Query 1 - Maintenance Orders Maintenance Plan and Actual - Regular Hours
    A database error occured. The database error text is: The MDX query SELECT { Measures.4IDV96Q35XYNK4WT6ECMO487E, Measures.4IDV96IEMZCY1IDD0KAAE29HM, Measures.4IDV96XROWKD2RG9C8EYY66X6 } ON COLUMNS , NON EMPTY CROSSJOIN( 0COORD_TYPE.LEVEL01.MEMBERS, 0PMPLANGRP.LEVEL01.MEMBERS ) DIMENSION PROPERTIES 0COORD_TYPE.20COORD_TYPE, 0PMPLANGRP.20PMPLANGRP ON ROWS FROM ZPM_M04/ZPM_M04_REGULARHOURS SAP VARIABLES !V000002 INCLUDING 0BUS_AREA.75 !V000001 INCLUDING 0MAINTPLANT.7500 !V000010 INCLUDING 1/1/2007 12:00:00 AM : 7/6/2010 12:00:00 AM failed to execute with the error Unknown error. (WIS 10901)
    I see the universe in the query pane and I am and I see LOV and run query button.
    What do I have to do in the universe to get this fixed
    Thanks for your help
    Mike

    1 ZCM Primary server, 8 Satellite servers
    ZCM version 11.2.1, Running on SLES 11 sp1
    Currently working with a customer that wishes to move their...

  • The YTD figure in Profit and Loss report is not matching whereas the Periodic figure is matching.Please suggest?

    Please need help how to solve this issue.

    With that question I doubt anyone will be able to help you.
    You need to be more descriptive and add more information about your issue.
    Regards

  • Totals for CKF are not matching

    Hi All,
    We recently upgraded to BI7 and we created Aggregates in the system. We have few calculated key figures (CFK) in the system. When we execute the queries they are not hitting the aggregates in the system because of the property, calculation before aggregation.
    We changed that property calculation before aggregation to calculation after aggregation then the queries are hitting the aggregates. So we moved the aggregates to BQ and BP. There the values for the totals in the report are not matching. For ex: we have value 10 for a CKF in five rows then the total in the result row should be 50 but that is not the case now, it is showing as 45 or 55 some value. The totals are not matching in all the reports where this CKF is involved.
    But when we keep the calculation before aggregation property as it is, then the total values for this CKF are matching in the report. But now the problem is that the queries do not hit the aggregates.
    So instead of going for a CKF we tried with creating a formula in the query with the same calculation as it is in the CKF, but for that formula also the total values are not matching. When we check and compared the formula calculation with other CKFu2019s in the system, we found out that those CKFs which involved the calculations such as multiplication and division the totals are not matching but if the CKF is containing addition and subtraction then the Totals are matching. This is the same case in across all the systems except in Production.
    We have testing system (BT), which is a copy of production; the totals are matching for this CKF in one report. But if we include the same CKF in some other report then the totals for this CKF are not matching in that report.
    We are unable to figure out why the same CKF with same properties and calculations is not behaving in the same way across all the systems. If anybody comes across such issue please let us know how to proceed further.
    Thanks for your patience.
    Hope for your response...

    Hi himanshu,
    If you are using Addition, subtraction with Multiplication & Division, just maintain all in the Sequence how you required using brackets.
    If you are using formula in Row & Column also try to use formula Collision.
    http://help.sap.com/saphelp_nw04/helpdata/EN/d2/02223c5f00612be10000000a11402f/content.htm
    Regards,
    Rajdeep.

  • Aging report and Control account value not matching

    Hi All
    The value what i am getting from   Vendor liabilities aging and Control account is not matching  for the same dates, all my parameters or selection criteria are same
    Same report if i am taking for the current date it giving correctly,
    If i am trying for a previous day the problem is happening
    How can i solve this issue

    Hi,
    Please check if the transactions are done for different Control Accounts and both the account balances are included in the Aging Report.
    Also, check that ALL the customers/vendor groups are taken.
    Make sure that you are running the backdated aging with the checkbox as mentioned in the Note 800294.
    If still facing problems may be you can provide with more details as to what the control account balances and what is the Aging, difference.
    PS: Check if there is any manual journal entry is created in the control account?
    Kind Regards,
    Jitin
    SAP Business One Forum Team

  • OBIEE 11g Report-When drilling down to lower level, totals are not matching

    Hi All,
    I am creating a report in Analytics 7.9.6.3 , OBIEE 11g - Let’s say Budget Cost/Actual Cost based on the Date Dimension
    Have selected the Fiscal Year Dim, Fact Budget Cost, Fact Actual Cost
    FY BCost ACost
    2011 100 120
    2012 150 140
    Total 250 260
    But here when I am drilling down from Year to Quarter and Period - The values are not matching with the totals....
    FY FY Qrt BCost ACost
    2011 2011 Q1 80 100
    2011 Q2 100 90
    2011 Q3 110 120
    2011 Q4 90 130
    Total 380 440
    Fiscal Year, Fiscal Quarter Budget Cost and Actual Cost are not returning correct results – When selecting cost's by fiscal year, or filtering on a specific fiscal year, the amount returned does not equal the fiscal year total;
    when I am drilling down to Quarter and Period Level the BCost & ACosts are bumping the Numbers as above and not matching with totals
    Any suggestions?

    Check out the query in both the times.Execute against database and try to sum the data for quarter/period and compare it with Year data.
    Just try to differentiate is it a report total that is getting wrong or the data in the database table itself is getting wrong stored.
    Mark as helpful if it helps.
    Regards,
    Veeresh Rayan

  • Fund center reports Assigned values are not matching with ledger balances.

    Thanks for your Support. We have activated funds management in May-2009. And deactivated one or two times. Now the status is active.
    Now we are taking reports the assigned values are not matching with gl ledger balances.
    1. We need to update records for April- May.
    2. Records in between deactivated and activate time.
    Please suggest updating fund centers and commitments.
    Regards

    hi ELI
    i have checked the follwoing secnarios
    1. funds management deactivated.
    2. one document posted  with amount10000
    3. funds management activated.
    4. we have executed FMN0
    here no document is selected after execution.
    Please suggest what are the activities we need to do if i am wrong...
    Regards

  • Monthly Aggregate Values are Not matching between Two Reports

    Hi,
    I have two custom reports (Pivot Table View)
    _1) National Report_ This report renders data for the 10/11 Season (From 04/01/2010 To 03/31/2011). It includes Monthly Aggregate as well as 10/11 Season Grand Total. This report shows the correct information. We don't have to do any changes.
    _2) YOYOY Report_
    This report renders data for the 10/11, 09/10, 08/09 Season (From 04/01/2008 To 03/31/2011). It includes Monthly Aggregate for each of the three seasons as well as Grand Total for each Season.
    Issue:
    Monthly Aggregate Total for the YOYOY Report is not matching with the National Report Monthly Aggregate Total.
    Technical Background:
    - For 10/11 Season, the expressions used to arrive at the Monthly Aggregate Total is the same.
    - Filter Criteria for (1) Report is specific to 10/11 Season (Rest of the criteria is similar)
    - Filter Criteria for (2) Report is for 08/09, 09/10, 10/11 Season (Rest of the criteria is similar)
    - In Report (1), Date Expressions are based on the following Attributes
    Column Name: Month
    Expression: MONTHNAME(Activity."Created Date")
    Column Name: Sort on Created Month
    Expression: CASE MONTH(Activity."Created Date") WHEN 4 THEN 1 WHEN 5 THEN 2 WHEN 6 THEN 3 WHEN 7 THEN 4 WHEN 8 THEN 5 WHEN 9 THEN 6 WHEN 10 THEN 7 WHEN 11 THEN 8 WHEN 12 THEN 9 WHEN 1 THEN 10 WHEN 2 THEN 11 WHEN 3 THEN 12 END
    Column Name: 10/11 Season
    Expression: /* Metric column name: # of high risk infants identified since last visit */ CASE WHEN "- Activity Custom Metrics".S_INT_10 IS NULL THEN 0 ELSE "- Activity Custom Metrics".S_INT_10 END
    Aggregation Rule: Sum
    - In Report (2), Date Expressions are based on the following Attributes
    Column Name: Month Column
    Expression: Date."Calendar Month"
    Column Name: Sort on Created Month
    Expression: CASE Date."Calendar Month" WHEN 4 THEN 1 WHEN 5 THEN 2 WHEN 6 THEN 3 WHEN 7 THEN 4 WHEN 8 THEN 5 WHEN 9 THEN 6 WHEN 10 THEN 7 WHEN 11 THEN 8 WHEN 12 THEN 9 WHEN 1 THEN 10 WHEN 2 THEN 11 WHEN 3 THEN 12 END
    Column Name: 10/11 Season
    Expression: CASE WHEN Activity."Created Date" BETWEEN /* First Day of Current Season */ timestampadd(sql_tsi_day, -dayofmonth(current_date)+1, timestampadd(sql_tsi_month, -(month(current_date) - 4), Current_DATE)) AND Current_DATE THEN "- Activity Custom Metrics".S_INT_10 ELSE 0 END
    Aggregation Rule: Sum
    Key Information:
    - For 10/11 Season, Activity."Created Date" attribute is used for all the calculations based on date.
    - For 08/09 and 09/10 Season, Date.Date attribute is used for all the calculations based on date. This is because the data was migrated from Asset Record Type to Activity Record Type for these seasons.
    I have tried variety of options and nothing seems to get the Monthly Aggregate matching. Kindly suggest what changes do we require.
    Regards,
    Muddessar Nadeem Alanji
    +91-98456 13180

    Hi,
          Are you saying that you loaded the same excel document to both planning area and cube but the data in both is not matching??
    How did you load the excel data to planning area?
    Can you give more details on what data is not matching? Is the cube value smaller than the value you see in planning book?
    Secondly if you are looking at data, make sure your selections are right. In cube, you have to specify the characteristics and at the bottom of the screen you specify the number of records to be displayed. Increase that to some big number like 9999 so that you can see all the records.

Maybe you are looking for