[Feature Request] Option to disable auto-scrolling

LG Nexus 4, Android 4.4.4, Vodafone, Skype 5.0.0.52727
Please provide an option to get rid of that automatical scrolling to end of conversations when someone texts in it. Can't read older content on my Android phone when people keep writing.

This makes Skype unusable with group chats!
Also, if I scroll up, open an older link, when I get back to Skype it autoscrolls down to bottom of the conversation - that is also really bad, I typically want to continue reading from where I left.

Similar Messages

IOS 7 feature request: Option for home button to home not folder.

IOS 7 feature request: Option for home button to home not folder. Maybe for some this workflow is good but not for me. To many clicks. At least give the option to have my home button take me to my home page. 9 times out of 10 that's where I want to go. Not back to my folder.

send your feedback here http://www.apple.com/feedback/

Feature Request: Ultrabeat: Load Sample auto copy file name to Drum Voice

Feature Request: Ultrabeat: Load Sample auto copy file name to Drum Voice
I wish that when I load a sample into a drum voice, that it would automatically copy the name of the sound file I'm importing to the drum voice minus the extension. If I were importing BD01.wav I'd like for the drum voice to display BD01. As it is, I have to import the file, then name or rename the drum voice to BD01. When importing large quntities, this becomes a giant pain, and I'm looking for anything programmatic that could save me a load of time. When I think of all the time I'm going to waste...and if you multiply that by all the number of users...that's a lot of wasted time.
I wish of course that the program could suck up and autoload all of the sound files within a directory, names too, until the voices were full. Then I could just fine tune and kick out ones I don't want or want in different order. Not a big deal for users who are importing from all kinds of different sources, but say for impoting libraries like NI's Battery, it's a big deal.
Maybe these could be choices in the load sample menu.
powerbook G4 Mac OS X (10.4.4)
pb g4 Mac OS X (10.4.4)

Microsoft pulled the plug on DirectSound HAL in Vista due to lack of hardware support. The SAL exists for
software compatibility, good intention but bad performance as there is no longer a direct path from
DirectSound to audio drivers.
People choose DirectSound for its Direct-ness
but there is no reason to choose it now.
DirectX SDK was integrated
with WIndows SDK which ships with Visual Studio 2012 so you don't need additional downloads for
WASAPI and XAudio 2.
Just look up the documentation for headers/librarieslike every other Windows API you use. If you have a hard time to find the documentation then you need to go to search engines and find search engine tutorials.
There are plenty of samples for both WASAPI and XAudio 2, both in the Windows SDK and online. The DirectX team has some suggestions on which to use on their team blog.
You can find experts for those APIs at the Windows Desktop Pro-Audio Application Development forum and the
Audio/XACT forum on MSDN (link left out for you to practice your search skills). Again, it is fine to ask for hints but don't ask the whole
solution. You are competing with others who just need a hint to finish work here. The time spent on working on your assignment would be better spent on helping on giving hints to others.
Visual C++ MVP

Feature Request: Option to Not Autohide Video Controller

Curently, when you enable the built in video controller it will auto-hide when the cursor is not over the movie. I'd like to request you make the autohide feature a checkbox option in the Video properties area and have the video controller stay on the screen as the default behavior. Here's why.
When students come to a sheet with an enbedded video, they have no idea it's a video unless they accidentially move the cursor over the video area. It would be great to have the video controller always visible to let users know there is a video on the sheet, and would save developers some time from having to add instructions on the sheet to play the video. I'd like to remove any/all confusion the students might have in using content built by ROME.
Thanks.
David Egbert

Thanks David! This is now added to the feature request list.
Best,
Sarah
Sarah
Forum Moderator

Blackberry Desktop Software - Request Option to Disable Software from Loading During Start-Up

After Blackberry Desktop Software automatic updates. Software become part of Start-Up option or menu. I do not want Blackberry Desktop Software to automatically load during Start-Up. The Desktop Software does not have a user friendly option to disable the desktop software from loading during start-up. Am writing you to add this feature to your desktop software. I've just completed loading v5.0.1 and again I need to hunt and peck a way through windows to delete this software from loading during start-up. This software needs to have a user friendly option to disable the desktop software from loading during start-up. When I loaded v4.x.x when I bought my blackberry your set-up wizard had this disable option, but all your subsequent software upgrades change my windows start-up to load blackberry desktop manager software. Please add this feature to your software.

Hello and Welcome to the Forums!
In regards to your hope that RIM will see your message -- these forums are a user-to-user support channel, not a user-to-RIM conduit. As such, it is unlikely that they will see what you have written. However, if you have specific and constructive ideas for them, I have heard that they accept such via email to [email protected]
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Feature Request:- Option to reply to reply to emails in text

Hi there....
Is it possible to set up replying to emails to send text (with no html)
If not, can i get a feature request to send emails in text, or is there an app that has this feature?
It is sad I get maybe between 40 and 100 emails a day, that I cannot reply to on my Touchpad, or Pre 2, as they only allow text email return.
as of 2007, there were over 109 million yahoo group members across 8.8 million groups. Mostly support forums, sending and recieving emails to and from 109 million people.
These support forums and other ghelp yahoo groups, require emails to be received in text, and in our email apps had to set for text only, to avoid viruses and other attempts at marketting.
I get my yahoo support emails, on webos, but cannot reply from webos, and have to wait until i get to my laptop with thunderbird.
please can you add text send/reply option for those 109 million plus yahoo group users who cannot reply to yahoo groups emails.
thanks....
this is a major pain and must be for others.
ta
Ralph :-)
Sorry for typos
Post relates to: Pre 2 p102ueu (Unlocked EU)

Managing layered PSD files in Aperture
For those who absolutely must manage layered PSD files in Aperture, here is the way to do it...
1- In your original PSD file, HIDE ALL LAYERS above the background layer
2- IMPORT this PSD file into Aperture
3- CREATE A VERSION in Aperture by choosing to edit externally in Photoshop.
4- Back in Photoshop OPEN THE ORIGINAL PSD file along with the new version
5- LINK all the LAYERS in the original PSD file and DRAG them TO the new VERSION (holding the shift key down so they pin register)
6- SAVE the new version in Photoshop
7- Back in Aperture your version is now an exact layered copy of your original which will not flatten when reopened from Aperture into Photoshop.
Obviously this process will be rather tedious if you need to deal with hundreds of layered PSD files, but if you are in that situation that implies you already have a workflow and a storage strategy that works well for you. So why change, especially to Aperture?
Adobe Bridge or Media Pro or Portfolio are the obvious programs for you !
Dual 2ghz G5 Mac OS X (10.4.3)

Feature Request - Options to Size & Align Type by Cap Height

I have repeated this feature request at least a couple or more times in this forum over the years. It's a pretty fundamental, basic design thing that bears repeating until the feature is incorporated somehow.
From its first version up to now Adobe Illustrator has only sized type according to the height of the Em Square. That's the standard convention for print and doesn't really need to change for print publishing. However the Em square methods are really pretty bad in other areas. Designers need pixel-level control for creating and positioning type on electronic, pixel-based screens. For large format printing, sign design and outdoor advertising designers need to size type by cap height in units of inches, centimeters or pixels when designing for LED variable message center signs.
Adobe Illustrator currently can't even do something as simple as accurately aligning lettering vertically inside of a box. When aligning by way of the Em square the type is never correctly aligned. The fundamentals needed for this have never been present in the application. It really stinks. Designers have to employ all sorts of time-wasting work-arounds to get the type looking correct. This makes basic tasks like button creation far more of a time wasting chore than it should be.
All fonts have built-in values that establish a capital letter height in numerical terms (the units between the base line and M height line). Industry specific sign design software applications like Flexi and Gerber Omega access that font data and allow designers to accurately size, align and position type according to its capital letter height. Adobe Illustrator can and should be able to do the very same thing. Not only that, but Illustrator could let designers size, position and align type in terms of inches, centimeters and pixels.
I'm not sure how this feature should be incorporated. Perhaps it could be something that users can enable in the document setup. Or it could be an optional type palette. Nevertheless, it is a badly needed, very basic feature rooted in the core of Adobe Illustrator's vector object editing purposes.

I'll also add this is a feature that should be carried over into Adobe Photoshop too.
Within Adobe Photoshop if you want to size type in terms of pixels the type is, again, sized according to the Em square. Unless you're setting type at pretty large pixel sizes the rendered type really ends up looking pretty bad. That's because the edge of the baseline and the edge of the cap height line are never aligned to the pixel grid. You end up with type that's fuzzy looking on all sides. If designers were able to tell Photoshop "make this lettering 20 pixels tall according to the capital letters" the lettering would looking a whole lot better. Perfectly crisp edges on the base lines and cap height lines.

Feature request: option to deactivate builtin screen when monitor connected

This is a feature request for laptops, or rather for the Air specifically. To see why it might be a good thing, see this thread:
http://forums.macrumors.com/showthread.php?t=449778
I'd like a checkbox in the display preferences to deactivate the internal monitor when an external monitor is plugged in. This would save load on the Air's GPU and reduce heat while using an external monitor.
Users of the regular Macbook might want this as well.

Apple doesn't monitor the forum for feature requests and the like. It's just for user-to-user help.
Also note that this feature already exists: all Mac laptops sold in the past few years, including the MacBook Air, can be run with only an external monitor. It's called closed-lid mode.
http://docs.info.apple.com/article.html?artnum=86286
http://docs.info.apple.com/article.html?artnum=307315
If you then want to open the lid to increase cooling, you can. Once the external display is attached, the internal display does not come on automatically when you open it.
If you still want to give Apple feedback on another issue relating to the MacBook Air, the link is:
http://www.apple.com/feedback/macbookair.html

Feature Request: Option to Quit via "X" and Disable Autostart Without Logging In

To elaborate on the subject for the DEVs, I would like to request the ability to quit the application quickly or even the option to do so in the settings. Also, I would like to be able to disable autostart without having to log in. I don't use Skype all the time and the accumulation of applications running in the background becomes cumbersome on systems as many other applications each have similar issues of "closing to system tray" or running in the background.

You might be able to get where you want using Chaotic Software's MediaRage. It can automate and batch tag editing, including building a Title tag that combines Artist and Title and, to possibly address you other problem, blanking the Artist tag.
MediaRage is not expensive and it is very powerful, you can even define regexs for how to parse tags.
HTH. - Tom

Feature Request: Audio Level Control + Auto-accept chat

Hi all,
Just a quick note...
I am using iChat to monitor my elderly Grandfather who has mobility problems. He lives with me, but in a different room in my home.
I watch and listen in case he falls, or calls for help.
I use Bonjour to initiate a video chat and use his built in iSight in his iMac (intel).
The problem I am having is that there is no volume control on iChat, therefore the only way to control the level is via the main system volume. That doesn't work well since it affects all other things I am doing (music, videos, other chats, web pages...etc).
So basically I have to listen to his iChat session at system volume and 23 hours a day that's just coughing, or his TV, or whatnot.
It would be very useful if iChat had an independent volume control/mute for applications like this, and even for regular audio/video chat (some people listen to music while chatting).
The other request I would like up for consideration is a password protected auto-accept feature.
This would allow the host to automatically accept and initiate text/audio/video chats requested by authorized clients.
This way I don't have to initiate a chat, then run down to the other room to accept it.
Also this would be useful for security monitoring and baby monitoring purposes.
Thanks for listening
Sean

In the Alerts tab of iChat preferences, select Video Invitation from the Event pop-up menu. Then select the Run Applescript checkbox and select Auto Accept.applescript from the adjacent pop-up menu.
Granted, this doesn't give you password authentication, but I don't believe anything is available for providing that capability.
Hope this helps.
Palms831

Is it possible to disable auto scroll

When my cursor moves to an edge of a spreadsheet that has additional content
not visible in the window the window automatically scrolls in that direction.
Also if a part of a cell is visible putting the cursor in that cell automatically
scrolls that cell to become fully visible.
This is very irritating.
I’ve left feedback.
Does anyone know how to disable this?
Terminal hack?
Thanks ... Ken

I am not aware Numbers has this "feature". The only panning feature I know of comes from the OS and can be controlled by zooming in using the Universal access.
Universal Access can be found in System Preferences (menu item " > System Preferences"):
Do you have "Zoom" enabled?

JAAS Kerberos Feature Request:-- Option: forwardable = true in configfile

Hello,
in order to request a forwardable ticket from the kdc (without using native cache)
you have to provide the krb5.ini (or krb5.conf) file
with proper krb connection infos (REALM, domain ...)
AND
forwardable = true
It is not possible to configure
com.sun.security.auth.module.Krb5LoginModule with this option.
folowing jaas.conf should work
KerberosClient {
   com.sun.security.auth.module.Krb5LoginModule required
   useTicketCache=false
   forwardable = true
};thanks

I have just been pulling my hair out with this same issue! I'm fairly new to Illustrator, so figured it was me just not knowing how to do something simple.
Also I don't think the pen tool in Ideas is really a pen tool as we know it.

Disabling "auto scroll to the bottom function" on JScrollPane

Hi all!
I have a little problem with JScrollPane.
I have a JEditor Pane on my JScrollPane which content type is text/html. When the content of html code is too large scrollbars are appear and vertical scrollbar automatically scrolls down to the bottom of my JEditorPane. How can I disable this "function", because I don't want to see the bottom of the page after contet is loaded. (Only in case when the user scrolls down manually.)
Thanks for your help!

after loading the file you should be able to use:
textComponent.setCaretPosition(0);

Disable auto-scroll when using shape tool in full screen

I have a task that requires tracing in full screen mode on an image that is exactly the same size and resolution as the screen. Unfortunately when I draw shapes near the edges the screen scrolls even though there is nothing more to show. This makes me have to move the screen back into alignment over and over, or settle on using paint tools only near the edges.
Does anyone know how to turn off this "feature"?
Thanks!!

I am in the middle of a similar task and am having the same prolem. Please does any one know how to turn scrolling off?

Canon 5D3 Feature Request / Wish -- Manual exposure auto shutter speed toggle

I've been using Canon gear the last six years & I don't know if this is currently possible in any camera body. If not, I believe it would prove highly helpful for working professionals.
When working in time-sensitive situations, I find myself frequently forced to use Av mode when I would prefer to remain in Manual exposure. Additionally, I find myself slowed down within Manual exposure mode when moving between inddor and outdoor light and/or other situations of dramatic ambient light fluctuation.
My wish would be for a menu assignment function for the "multi-function" button (next to the shutter release). Pressing the button while in M exposure mode would then set the shutter speed (like in Av mode--and another option could emulate Tv mode), and releasing the button would resume normal M exposure mode usage.
Personally, this is my biggest wish for the 5D3, and I would LOVE to see it implemented. (My second wish would be for the flash exposure lock to set the exposure of Flashes which are otherwise set to manual flash exposure, but that's another story).
Thanks,
Bert

Nope. That's a 1D X feature.

[Feature Request] Option to disable auto-scrolling

Similar Messages

Maybe you are looking for