Feedback not appearing on retake of quiz

When a person takes the quiz, fails it, then retakes it, the answer feedback is not showing up on the second attemp at the quiz questions. Any ideas????

Hi,
I could not reproduce it on Presenter 7.0.7
Could you verify one thing:
Goto MAnage Quiz->select the question and press Edit.
Select Options tab.
Verify that the options 'Show correct message', 'Show error message' are checked.
If not, please check them.
If this do not resolve the problem, then I need to know all other setting syou made inside the Manage Quiz.
Thanks,
Alpi Agarwal

Similar Messages

Retake button does not appear after test review in Captivate 6

Hello All,
I can't figure this out and it is really causing problems.
I have a 20 question quiz randomly pulled from questions pools. I am publishing this as Scorm 2004 and delivering via I SPring scorm compliant LMS.
The requirement to pass is 100%.
On the results slide I have a review quiz button, retake quiz button, and a continue button.
If a user does not pass the first time they either retake the quiz or review the quiz first.
If they review the quiz, when they return to the results slide the Retake quiz button is no longer there, and I cannot seem to come up with a way to make it appear, or reset the quiz for a 2nd attempt.
I have Completed settings to 100% on Quiz.
Pass settings to 100% on quiz.
I am showing the retake button.
I have set it to "Unlimited attempts"
Any suggestions? It seems to lie in the link between reaching the results slide from the review path rather from an attempt path?
Thanks you.

Hello,
Bad news, because that is the way Quizzes are designed in Captivate. Reviewing will disable any future attempts, is meant only to be used after attempts are exhausted. For that reason personally I will hide the Review button by dragging it under the Retake button for quizzes.
Have a look at my blog post about question/score slides (hurry, Posterous will close down soon):
http://lilybiri.posterous.com/question-question-slides-in-captivate
Lilybiri

How to get a question in the course placed anywhere in the course and does not appear in the quiz result or total number of questions. Pretest would work except it can't go anywhere in the course (at least for me it can't)

How to get a question in the course placed anywhere in the course and does not appear in the quiz result or total number of questions. Pretest would work except it can't go anywhere in the course (at least for me it can't)

Use a normal question, and do not add the score to the total score. That will give you a correct score at the end. But the total number of questions, that system variable will still take into account all questions. You'll need a user variable, and calculate its value by subtracting 1 from the system variable cpQuizInfoTotalQuestionsPerProject. Same for the progress indicator if you want to show it?
Customized Progress Indicator - Captivate blog
If you want to allow Review, you'll have to tweak as well. You didn't specify the version, and all those questions I now mentioned.
And my approach, since you talk about only one question: create a custom question, because you'll have total control then.

Radio Buttons Not Appearing in Quiz

I created a quiz in Captivate 5.5 then upgraded to Captivate 6. When I run the quiz locally, the radio buttons appear next to the possible answers and everything works fine. When I run the quiz in our LMS, the radio buttons do not appear. Anyone else having this issue or have any insight?

Hi Anjaneai,
For some clarification, we are loading the Captivate 6 quiz swf into another swf. When we play the quiz swf alone, the radio buttons appear. However when we play the quiz swf within the other swf, the radio buttons disappear. To reiternate, we loaded Captivate 5.5 quiz swfs into another swf and the buttons appeared. Do you what the difference between the Captivate versions could be or have any insight?
We've already looked into some of your suggestions (the Flash player is not the issue) and am looking into your other suggestions.
Below is the screen shot you requested.
Thanks again for your assistance.

Button not appearing on quiz pass

Hi All,
I'm trying to get a button to appear on a quiz when someone passes successfully. This button will be a link to another .swf file that will pulled into the project in Aggregator. The link is working fine, but I cannot get the smartshape to appear successfully when the quiz is passed. I have used the cpInfoPassFail Advanced Action set to greater than 1, visibility is turned off and execute advanced action is set in the Action property box, but still it does not show. I've working round and round and circles with this all day, trying different advanced actions, visibility on, off... and nothing is working with it.
If anyone has any suggestions how and why this not working, I'd really appreciate it. I'm not finding Captivate particularly intuitive at the moment and am seriously considering heading over the Storyline.

cpInfoPassFail will never be greater than 1; it has only two values: 0 if failed, and 1 if passed. It is a boolean variable.
When looking at your action: I thought you wanted to open the URL using the shape button, but you put the command Open immediately after showing the shape? That part should be triggered by the shape button. I hope you configured it as a button?
http://lilybiri.posterous.com/why-i-like-shape-buttons-captivate-6
Have a look at this blog post, it has a link to a list explaining all system variables.
http://lilybiri.posterous.com/system-variables-in-captivate-6
Lilybiri

Quiz Slides not appearing second time through

Good afternoon,
In my current project, I have used self-built quizzing slides using clickboxes (thank you lilybari!) and used some quiz slides. In this part, I am not reporting the data as this is only the teaching section. For SCORM purposes, I am only recording slide views. I have also created my own navigation buttons for forward and back.
When I view the section the first time through, I see the quiz and other slides properly. For some reason however, if they use the back button to see the section again, the quiz slides either appear again and get stuck or do not appear at all. I would like for them to see all slides again if they go back as that is the whole purpose of the back button feature.
I have attached a portion of my project where this is occuring. Any suggestions would be greatly appreciated!
Eric
PS Thanks Captivatr for your help earlier!

Hello Eric,
Will try to have a look at your project later on today (exams for the moment). Cannot open your file, no CP here.
Lilybiri

How can I allow the user to retake a quiz from the middle of it in Captivate 7?

Hello Captivaters,
I would like to force the learner to pass a quiz before he can continue on with the training. If he doesn't pass the quiz, he will need to go back and take it again. The "retake" button allows him to do this, but I will actually like to have 4-5 of these "quiz checkpoints" in the eLearning -- each separated with presentation material -- so that the user proves he understands the material before advancing.
Therefore I would like to create my own "retake" button at the end of every "quiz checkpoint" that takes the learner back to the first question of that checkpoint (not to the first question in the training). So far, I have been able to create a button that appears after he gets a certain amount correct to allow him to continue, and I want to create a button that appears that takes him back to the first question in the checkpoint if does not get the required amount correct and retake those questions. The first part is easy, but I also need to add the function or reassign some variable to allow the user to retake the quiz. I hope I am making sense.. Any help would be much appreciated!
- Ryan

It's great! Thanks again.
Here is the issue now. I guess it's not a huge problem, it's just if I can't find a better way, what I need to do will take a lot of time.
Like I mentioned before, I created this "results" slide that on enter either shows a "congrats" button or a "retry" button, depending on whether or not the user passed the quiz. I have copied this slide and pasted it behind all of the other sub-quizzes in the training, but when I do that, of course the link between the buttons and the conditional advanced action break.
As you know, when you duplicate a slide, all of the names of the objects on that slide are "refreshed" and are replaced with new generic names because you are in fact creating new objects as well. This means that I need to rename all of the objects on that slide (even though its a duplicate) and then replace all of the "old names" in the advanced action with these new object names.. Is there a faster way to do that?
Thanks again!!
Ryan

Retake/Review Quiz

Hi all,
I have a project where I added the button for the user to be allowed to retake the quiz infinite times. It is working ok so far until the quiz slide is followed by a content slide. When the user has re-answered the quiz and click on "next", it goes to the content slides again. What I want it to do is just go through all the quizes that are marked wrong originally so the user can retake the quiz.
There is also a simulation within the whole course. If the user failed, for some reason, it doesn't allow them go through the simulation again. I dindt create these files. I inherited them and I can't seem to find the connections that make it behave such. Please help.
Thanks.
Todd
OR,
since it appears to be going through the content, can i make the Retake Quiz button go from the beginning of the course instead of just from the first screen? I can't find the place to edit the action for the Retake Quiz button.
Thanks

Captivate doesn't currently support the workflow you are describing here.
The Retake Quiz button that you can enable for the Quiz Results slide will jump the user back to the first scored object or quiz question in the module and set the quiz score back to zero at the same time. This button will be available on the Quiz Results slide every time the user completes the quiz UNTIL they either pass the quiz or exhaust their allowed number of quiz attempts. There is currently no provision in the Quiz options to only require the user to redo quiz questions they failed.
If you have set up your own button somewhere that jumps the user back to the beginning of the module or to the beginning of the quiz, this is not going to be able to reset the quiz as well. The quizzing variables are not controlled by Advanced Actions.
With regard to your simulation, if you do not have the source files for it, then there's little hope of changing the way it works. Sorry.

Hello I don't know who to complain to as you do not appear to have a complaints department, despite searching the web, I trust you can pass this to relevant department for action, as I'm very angry over my recent repair. Following my issue relating to a

Hello
I don't know who to complain to as you do not appear to have a complaints department, despite searching the web, I trust you can pass this to relevant department for action, as I'm very angry over my recent repair.
Following my issue relating to a blank screen 2 weeks ago, your advisor arranged for my iMac to collected by Amsys, for repair and return, this was done and it was returned to me last Tuesday, onWednesday I set up my iMac again and instantly realised I had problems, much worse than before. I called Amsys to inform them of the issue of the computer being very very slow and unable to open iPhoto and pages, and document listing would not show up, plus I had no sound on the mac.They informed me that they had only replaced the video card and what they had done would have not affected the computers performance. He suggested I reinstall OSX again which I did, but this made no difference to the programs, so I called you.
Your technician on the phone was very good as they have always been, and made an appointment for me to go into the Milton Keynes Apple store the next day at 1 pm, which I did.
The gentleman on the Genius Bar was very good and was able to run tests on the iMac in my presence, and diagnosed immediately an issue with the sound problem, and advised me that this could not be fixed while I wait and I would need to leave it for repair. I made him aware of the previous repair, and he was able to see via your system, the list of logged issues I have had with this since purchasing in September 2012. I'm sure you can see from the way you record all calls and issues the problems I have had.
Today I called to ask if my iMac would soon be ready for collection, I was told the repairs had been completed and it was being tested. However to my dismay, I learned of another serious issue relating to the repair carried out by Amsys. I was informed that 6 screws were missing from the the iMac internally, which caused me much distress and concern, they also told me I had to wait even longer as the screws had to be ordered and installed on arrival before I could collect it.
My issues here are: I trusted the Amsys repairer as it was arranged and recommend by you, it is very evident they are not competent to repair, as they have caused more problems with my iMac on its return, despite enclosing a checklist, fully ticked showing everything working well, it clearly wasn't ! Plus the issue of missing parts (screws) during the repair, I have already expressed my disgust with Amsys, by email and had a response, within the hour, apologising and told me they were looking into this.
This where I stand on this, I have not had my iMac for almost two weeks and I do not know when I will get it back. I'm also very worried about what other damage has been caused by Amsys and the quality of my iMac now. I want to know what you, Apple is going to do about this ? I have already been very inconvenienced by this and until now I have been a very loyal apple customer with 2 iPads, and 4 iPhones in our household, not to mention the iMac.
I feel I have been very let down by this experience, on my iMac, which cost a lot of money, I have also lost a lot of money with lost work and unable to carry out my business without it, and I will be seeking compensation.
I trust you will take this complaint seriously and pass it to the relevant department for action.
Yours sincerely
Des Withey
Sent from my iPad
On 26 Feb 2014, at 11:44, Apple Support <[email protected]> wrote:
Thanks for contacting us.
Thanks for contacting Apple Support. If you need more help later, you can open the case below or start a new support request online.
Case ID:
Open this case
Sincerely,
Apple Support
Get help online
Visit Apple Support to learn more about your product, download software updates, and much more.
Join the conversation
Find and share solutions with Apple users around the world.
TM and copyright © 2014 Apple Inc. 1 Infinite Loop, MS 96-DM, Cupertino, CA 95014.
All Rights Reserved / Privacy Policy / Apple Support / Give us feedback
On behalf of Apple Distribution International

Call Apple Customer Relations - 1-800-275-2273. Ask politely & firmly that you want to be transferred to Customer Relations. Tell them exactly what you stated in your post.
GOOD LUCK!
These are user-to-user forums where everyday folk (volunteers) post questions and offer answers (technical support) to each other.

AED not appearing for utilization

Hi all
I am reposting the question having hopes of getting replies..
A similar question asked in this forum has also been included.
This particular case is for import trading scenario
Purchase Order is made in MM and during MIGO excise invoice is captured.Addnl CVD value 4% will be taken as AED.The same can be displayed in transaction J1IG.
Client has the requirement of displaying AED in J1IJ while capturing the excise invoice created during MIGO itself i.e, during goods inward as the same will be considered for RG23D reporting purposes.
But AED (Addl CVD 4%) is not being displayed in J1IJ for depo sales.
Also there is no field called as AED for capturing the same in J1IJ,but there are additional fields TAX1 and TAX2 in J1IJ.
BED,ECS,SEcess is transferred from J1IG to J1IJ but not AED
Awaiting all your useful feedbacks to display AED in J1IJ
similar question posted in the forum on Jul 8..
AED not appearing for utilization-Urgent
Posted: Jul 8, 2008 4:01 PM
Click to report abuse...      E-mail this message      E-mail this message             Click to reply to this thread      Reply
Hi All,
I am having input credit available for AED whereas the payable amount is not there for AED. So I want to utilise this AED amount against other payable amounts but this AED credit balance is not showing for utilization. When I have checked for other plant where AED payable is available then the AED input credit is also showing for utilization.
I have checked the CIN settings: In excise registration details for the plant, the Liable to AED option is ticked and under Account determination settings--- RG23 AED account has been assigned to UTLZ ETT.
Can anybody please suggest that what other settings needs to be done or is there any specific settings for cross utilization which I might have missed out on.
Thanks & Regards,
Antima
any inputs guys...........
Rgds
Shashidhar

Hi,
If i am correct you are referring to ADC (Additional Customs duty) in case of imports. This duty value is similar to AED (In screens it will be in AED column only) but in customization you will be using subtransaction type "IP" to differentiate AED from ADC, you need to maintain G/L accounts for Excise transaction types and subtransaction type IP, so that the duty values are passed on to those G/L accounts.
Cheers,
Santosh

Presenter 8 is not appearing in the ribbon

I have just installed the trial of this product on a Win 7SP1 system with Office 2010 (64bit). These meet the system requirements specified here:
http://www.adobe.com/products/presenter/tech-specs.html
Presenter does not appear in the ribbon. I have run the installer twice now. There is no disabled COM add-in.
What have I done wrong please?

Hi Alpi,
Thanks for your assistance. I did download the 64 bit version I believe: "Presenter_8_1_x64_LS12"
I have uninstalled and re-installed but still the same problem. I assume I can add the add-in manually but am not sure which file.
The reason for trying this software is to see if I can use it instead of Captivate to produce some training that comprises a series of videos clips (one per slide) with a quiz and table of contents. This will be delivered via an LMS and provide a certificate on completion of the whole (or most) of the presentation. The problem with Captivate is that I am having problems with iPad delivery; there is no playback control for the videos.
TIA

DateTimeControl Not Appearing for some Users

Hi,
I have the DateTimeControl on SharePoint web part. It works fine for most people but for others the calendar selection button does not appear. Only the textbox appears.
Why is this?
Thanks!
using Microsoft.SharePoint.WebControls;
protected DateTimeControl dtc = new DateTimeControl();
dtc.LocaleId = 2057;
dtc.DateOnly = true;
dtc.DateChanged += new EventHandler(dtc_DateChanged);
this.Controls.Add(dtc);
dtc.RenderControl(writer);

Hi,
We can do as follows:
1. We can create a new user with the same permissions as the user who can not see the calendar selection button.
Then use the new user login site and see whether the issue occurs.
2. Use the new user to debug your code.
3. Use IE8 to check whether the calendar selection button appears.
Here is an example for your reference:
Using the SharePoint date control in a web part
http://www.sharepoint-tips.com/2007/10/using-sharepoint-date-control-in-web.html
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support

IMSS Min Normalized Measure not appearing in imsmanifest.xml file

Hello,
The IMSS Min Normalized Measure line is not appearing in my imsmanifest.xml file. It used to, but since I upgraded to Captivate 5.5, I don't see it anymore. I have thoroughly checked my settings:
Reporting is enabled
SCORM 2004/Manifest/Default is selected
Report Status: Pass/Fail
Report to LMS as: Percent
Report Data: Quiz Results and Slide Views
Reporting Level: Interactions and score
Did Captivate 5.5 fix it so we don't have to add the minimum score into the zip file anymore? If not, how do I correct this so the line shows up?
Thanks,
Barb

Hi Melody,
What I've been told by Adobe is that Captivate 5.5 produces a different looking manifest file than previous versions of Captivate. For our LMS (Knowlagent), we require this line of coding so that we can manually input the minimum passing grade in a course.
Adobe said I could try to edit the default SCORM template to suit our LMS, but our LMS said it wasn't possible.
So instead, our LMS told us that if we adjusted the line of coding in each manifest file, it would work. And it has (it's just a little extra work each time you publish).
This is what you need to do:
Find the below block of code in your imsmanifest.xml file and change the value for satisfiedByMeasure from false (default) to true. Once that line is changed, in the same block of code paste in the minNormalizedMeasure line that was present in the file previously (both settings are highlighted below). The .80 is what we chose as our minimum passing grade (80%) but you can change that number to whatever you want.
                                                            <imsss:sequencing>
                                                                                <imsss:objectives>
                                                                                                     <imsss:primaryObjective objectiveID="PRIMARYOBJ" satisfiedByMeasure="true">
                                                                                                                         <imsss:minNormalizedMeasure>.80</imsss:minNormalizedMeasure>
                                                                                                     </imsss:primaryObjective>
                                                                                </imsss:objectives>
Hope that helps! Are you using Captivate 5.5 too? Which LMS are you using?
Thanks,
Barb

Lync Contacts not appearing in Lync 2010 after user is moved to Lync 2013

Good Morning,
Our company recently migrated all of our users to Lync 2013 from Lync 2010. Most of our clients are still running the Lync 2010 client on their workstations. There is an ongoing project where we are upgrading to Office 2013 as well.
When a user signs into Lync, clicks on their contacts, the list is blank. They see their frequent contacts and are able to search for people. Some people are able to manage their contacts through OWA 2013 since we have the integration in
place. If they try to add contacts in Lync, they receive the message:
Cannot Add, Remove or move contacts or groups at this time. Please try again later.
I have tried going into the %appdata%\Microsoft\communicator directory and deleting the .cache and .idx and opening Lync again and still they do not appear.
Found this article: https://support.microsoft.com/kb/2757458?wa=wsignin1.0, but we cannot role people back to Lync 2010. So they will just have to live with it until they receive Lync 2013 and use OWA 2013 to manage them until their office
client is upgraded.

Hi BrianDougherty,
I’m not sure whether this is caused by UCS, but you can test it by disabling UCS for a test user.
Run the following command and then check the result.
New-CsUserServicesPolicy -Identity NoUCS -UcsAllowed $False
Grant-CsUserServicesPolicy –Identity “test user” –PolicyName NoUCS
Invoke-CsUcsRollback –Identity “test user”
Best regards,
Eric
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Bounced files do NOT appear in finder immediately

I'm posting this in the Logic forum, because I believe it is an issue only happening with Logic and the Finder in 10.5.4.
When I bounce files from Logic7 or Logic8, and then switch to the "Bounces" folder in the finder window that I usually have open in the background, the file that I just bounced does not appear there. The only way to get it to appear is to manually browse to another folder and then back to the "Bounces" folder so that the finder refreshes that folder's contents.
This was not a problem until I upgraded to 10.5.4 and Logic8. I was previously on 10.4.9 and Logic 7.2.
Other apps seem to be able to save documents and files to a folder, and they immediately appear in the finder window. What gives? Anyone else noticing this behavior?
This is giving me a headache and carpal tunnel pain. It's a 2 for 1 special!

But I've seen it with FCP, Compressor, Snapz Pro video capture and other software as well, that I can't bring to mind at the moment.
Ok - so if it's quite common, then indeed it could be a common implementation of file writing that's not quite working right (due to changes in the OS perhaps) or is particular system routines themselves that have this issue. Makes sense.
What I am pretty sure about is that I've seen it more often with software that takes a while to stream its data to the file (which might imply that there is a bug in the file close routine or that the app still have the file handle open when it ought to close it) and that might imply it a problem in the Pro Apps support routines (if they handle streaming to files, which I doubt) or some aspect of file management which, guessing that these things are all done through OS file management objects, would imply incorrect use of the object or a bug in the object itself.
Yes, agreed. A much more eloquently written version of my above paragraph
I've certainly seen it elsewhere so it's wider than Logic.
I'm not up on the OSX reporting things - are there OSX feedback places where you can report OS bugs? There's always the ADC bug tracker I guess...

Feedback not appearing on retake of quiz

Similar Messages

Maybe you are looking for