Feig LRU 2000 UHF reader - Transparent Command

Hi,
Does anyone have any idea how to construct a Transparent command using mode 1 in FEIG lru 2000 uhf reader, for EPC command SELECT? I have been trying to accomplish the same for several days, but cudnt come up with a solution.
Earnestly looking forward to hear regarding the same.
Thanks & Regards,
Sharmila.

Got it. I tried booting with MOD_AUTOLOAD set to yes, and it was working fine. Looks like I needed to specify some more modules in my list.

Similar Messages

What is use of Read-Text command in Sapscript plz replay

What is use of Read-Text command in Sapscript plz replay
i m geting problem with read-text command in sapscript as will as
perform and endperform .

Hi Majid,
It's a function module to read the texts from a text file. Generally it is used to retrieve the long texts.
The function module reads the desired text from the text file, the text memory, or the archive. You must fully specify the text using OBJECT, NAME, ID, and LANGUAGE. An internal work area can hold only one text; therefore, generic specifications are not allowed with these options.
After successful reading, the system places header information and text lines into the work areas specified with HEADER and LINES.
If a reference text is used, SAPscript automatically processes the reference chain and provides the text lines found in the text at the end of the chain. If an error occurs, the system leaves the function module and triggers the exception REFERENCE_CHECK.
CALL FUNCTION 'READ_TEXT'
EXPORTING
CLIENT = SY-MANDT
OBJECT = ?...
NAME = ?...
ID = ?...
LANGUAGE = ?...
ARCHIVE_HANDLE = 0
IMPORTING HEADER =
TABLES LINES = ?...
EXCEPTIONS ´
ID =
LANGUAGE =
NAME =
NOT_FOUND =
OBJECT =
REFERENCE_CHECK =
WRONG_ACCESS_TO_ARCHIVE =
Export parameters
Specify the client under which the text is stored. If you omit this parameter, the system uses the current client as default.
Reference field: SY-MANDT
Default value: SY-MANDT
OBJECT
Enter the name of the text object to which the text is allocated. Table TTXOB contains the valid objects.
Reference field: THEAD-TDOBJECT
NAME
Enter the name of the text module. The name may be up to 70 characters long. Its internal structure depends on the text object used.
Reference field: THEAD-TDNAME
ID
Enter the text ID of the text module. Table TTXID contains the valid text IDs, depending on the text object.
Reference field: THEAD-TDID
LANGUAGE
Enter the language key of the text module. The system accepts only languages that are defined in table T002.
Reference field: THEAD-TDSPRAS
ARCHIVE_HANDLE
If you want to read the text from the archive, you must enter a handle here. The system uses it to access the archive. You can create the handle using the function module ACHIVE_OPEN_FOR_READ.
The value '0' indicates that you do not want to read the text from the archive.
Reference field: SY-TABIX
Default value: 0
Import parameters:
HEADER
If the system finds the desired text, it returns the text header in this parameter.
Structure: THEAD
Table parameters:
LINES
The table contains all text lines that belong to the text read.
Structure: TLINE
Exceptions:
ID
The text ID specified in the parameter ID does not exist in table TTXID. It must be defined there together with the object of the text module.
LANGUAGE
The parameter LANGUAGE contains a language key that does not exist in table T002.
NAME
The parameter NAME contains the name of a text module that does not correspond to the SAPscript conventions.
Possible errors:
The field contains only blanks.
The field contains the invalid characters * or ,.
OBJECT
The parameter OBJECT contains the name of a text object that does not exist in table TTXOB.
NOT_FOUND
The system did not find the specified text module.
REFERENCE_CHECK
The text module to be read has no text lines of its own but refers to the lines of another text module. This reference chain can include several levels. For the current text, the chain is interrupted, that is, one of the text modules referred to in the chain no longer exists.
WRONG_ACCESS_ TO_ARCHIVE
The exception WRONG_ACCESS_TO_ARCHIVE is triggered if an archive is accessed using an incorrect or non-existing archive handle or an incorrect mode (that is, read if the archive is open for writing or vice versa).
Br,
laxmi.

FileFormat: Reading transparency and color data separatley

I have a problem reading data via my file format plugin.
I can read the different layers in the format in Lab color mode (8-Bit).
In the file there is a layer transparency mask (1 byte for every pixel), which is stored right before the image data.
Currently I tried 2 approaches:
1.
- Set transparencyPlane to 3
- Set loPlane, hiPlane to 3
- Set colBytes to 1
- Set rowBytes to image width
- Set data to a buffer with size of image width
- read row from the transparency mask
-> advanceState gives error (-30500)
2.
- read transparency mask completely (I know, bad idea)
- Set transparencyPlane to 3
- Set loPlane = 0, hiPlane = 3
- Set colBytes to 4
- Set rowBytes to image width * 4
- Set data to a buffer with size of image width * 4
- read row from file in a temp. buffer
- copy values from temp. buffer and transparency for every pixel to the data buffer
-> advanceState ok but image ks not correct in PS
I think there must be another, better way to apply this transparency mask.
Thank you for your help....

Problem solved.
I forgot to tell PS the correct count of planes in the readStart selector.
So approach 1 was right.

Proxy-protocols transparent command

Hi,
According to the documentation, if the command:
- proxy-protocols transparent default-server
- http proxy outgoing host a.b.c.d
are used, content engine forwards intercepted http proxy-style requests to the corresponding outgoing proxy server, a.b.c.d in this case.
If some of PC web browsers have proxy configured and some do not have, will the cache engine forward ALL the http requests to the proxy server a.b.c.d (regardless of whether the browser is configured to point to a proxy server or not) ?
Or the cache engine only forward those PC web browser with proxy configured to the proxy server a.b.c.d and PC without proxy configuration will not be forwarded to the proxy server a.b.c.d?

All the traffic intercepted by the cache will be forwarded to the proxy.
So, you also need to intercept the traffic with WCCP or another method.
regards,
Gilles.

FP-2000 FP Read.vi problem : too much time to call

Hi,
Since I installed LabVIEW 8.0 and all the latest softwares for Real-Time targets, I have a problem with my FieldPoint FP-2000 when I try to read an I/O on the Fieldpoint :
On the project, when I launch my VI on my computer, the FP Read.vi or FP write.vi executes instantly, so no problem.
But if I launch the exactly same VI on the RT Target, it deploys correctly, but takes about 5-10 seconds to execute EACH call to the FP VIs. It means, if I want to read for example 10 inputs on the Fieldpoint, it will take more than 1 minute! The VI hangs until the FP read executes, but I don't have any error message.
I discovered that it was the DLL call that takes a lot of time to execute. If I launch a VI without a DLL call, it will execute instantly.
I verified, the softwares on my FieldPoint target are exactly the same that on my host PC...
I hope somebody can help me, I'm very annoyed !

Hi Thomas,
Yes it's only the first call that's take time. And yes I can call all my I/O after the boot, but it takes a lot of time (I have 34 I/O to call, with 5-10 seconds for each).
But for the moment it's the only workaround...
Message Edité par sebk1 le 03-01-2006 06:18 AM

How to open url in acrobat reader using command line

Hi,
I need to open file from url using command line, but I'm still getting some error (wrong filename).
I've tried for example this command:
AcroRd32.exe http://www.adobe.com/devnet/acrobat/pdfs/pdf_open_parameters.pdf
Can anyone help me and tell me what's wrong?

You can't use a URL as parameter for AcroRd32.exe.

How to make the top bar opaque as it's hard to read transparent background.

The transparent bar at the top of the browser is terrible to read and is distracting. I want to get rid of it. How?

Hi,
please have a look at skinning
http://download.oracle.com/docs/cd/E15523_01/apirefs.1111/e15862/toc.htm
search for af:calendar
Skinning is explained in teh Web Developer Guide on
http://download.oracle.com/docs/cd/E15523_01/web.1111/b31973/toc.htm
Frank

Read a command sh ip cache

Hello,
can you please tell me how can I determine the dscp value in the results?
and why we have an asterisk in front of the line Se1 / 0 192.168.87.156?
Router#sh ip cache 10.136.89.1 255.255.255.255 flow
IP packet size distribution (1360944M total packets):
   1-32   64   96 128 160 192 224 256 288 320 352 384 416 448 480
   .002 .411 .481 .013 .007 .005 .004 .002 .001 .001 .001 .008 .001 .002 .000
    512 544 576 1024 1536 2048 2560 3072 3584 4096 4608
   .000 .000 .001 .007 .042 .000 .000 .000 .000 .000 .000
IP Flow Switching Cache, 278544 bytes
4079 active, 17 inactive, 445750941 added
1698726152 ager polls, 0 flow alloc failures
Active flows timeout in 30 minutes
Inactive flows timeout in 15 seconds
IP Sub Flow Cache, 165128 bytes
4079 active, 1041 inactive, 445750941 added, 445750941 added to flow
0 alloc failures, 1734 force free
5 chunks, 545 chunks added
last clearing of statistics never
Protocol         Total    Flows   Packets Bytes Packets Active(Sec) Idle(Sec)
--------         Flows     /Sec     /Flow /Pkt     /Sec     /Flow     /Flow
TCP-Telnet 1300843399    302.8         7   162   2239.3       1.2       0.5
TCP-FTP        4168409      0.9         4    47      4.5       0.6       1.4
TCP-FTPD         40373      0.0        14   674      0.1       0.0       1.4
TCP-WWW    31657473924   7370.8         4   401 32146.8       0.7       0.9
TCP-SMTP         55914      0.0         3   255      0.0       0.2       1.6
TCP-X         90872816     21.1         2   119     60.3       0.9       2.6
TCP-BGP           7426      0.0         1    51      0.0       0.0       0.3
TCP-NNTP         10494      0.0         1    49      0.0       0.0       0.4
TCP-Frag            12      0.0         8 1480      0.0       0.0       0.8
TCP-other 40417291290   9410.3         4   290 37753.5       0.3       2.1
UDP-DNS      101696764     23.6         2    77     68.5       0.6       3.6
UDP-NTP       13067239      3.0         1    78      3.1       0.0       5.0
UDP-TFTP        674721      0.1         6    86      1.0       3.5       3.8
UDP-Frag        489782      0.1       706 1424     80.5       1.5       1.8
UDP-other 46275723602 10774.4        22    82 243252.3       0.8       0.5
ICMP         767922077    178.7         5   283    988.4       1.2       2.5
GRE           74492207     17.3        15   114    271.3       2.3       0.2
IP-other           701      0.0         1    21      0.0       0.1       4.2
Total:     120704831150 28103.8        11   141 316870.2       0.6       1.2
SrcIf         SrcIPaddress    DstIf         DstIPaddress    Pr SrcP DstP Pkts
Gi0/0         10.136.89.1     Se1/0*        192.168.87.156 01 0000 0800     5
Gi0/0         10.136.89.1     Se1/0         192.168.87.156 01 0000 0800     5
Se1/0         192.168.67.176 Gi0/0*        10.136.89.1     01 0000 0000     5
Se1/0         192.168.67.16 Gi0/0         10.136.89.1     01 0000 0000     5

Hi,
To see QoS information you need to use this command : show ip cache verbose flow.
The asterisk signals you it is an egress flow.
Regards
Alain
Don't forget to rate helpful posts.

900 photos on iPhone, 2000 photos read by iTunes. How to set this right so it wouldn't eat up my storage?

I have 900 photos on my iPhone currently, but iTunes reads it as 2000 photos eventhough I've already transferred and deleted my previous photos (w/c did amount to 2k before). It's eating up 4.91 GB of my storage, and I don't know how to set it right. I want to add music and update my iOS, but it tells me I can't because my "4.91 GB" worth of photos is eating up my storage. Please help. Thanks.

I had same problem .... no photos still photos holding up space on my device here is the solution
https://www.youtube.com/watch?v=8WT3Z0Hals4
Its because of new update on iPhone, Old photos don't Get deleted itself you have to delete manually…

How can I create an Acrobat Reader menu command (like "open serachbar") to a button in Indesign?

In Acrobat Reader this is possible, but I can't find this interactive option in Indesign?!!

You can't. It has to be done in Acrobat Pro.

I am looking for what type/setup of Read/Write command in RSLogix 5000 to be used with the NI Ethernet I/P Driver

I am working on trying to get LabView to communicate with an Allen-Bradley Compact Logix PLC using the NI Ethernet I/P driver. I am currently getting errors on both system of a CIP Message instruction error and cannot determine if the problem is in the PLC or the NI. At this time we are leaning toward the PLC, thus I was wondering if anyone new what type/setup of message read and write to utilize.

Hello jabcae,
Thank you very much for posting your questions.
I recommend posting to the PLC Manufacture’s forums. They will be able to provide more insight on the PLC code.
I also recommend posting this question to the Industrial Communications forum:
http://forums.ni.com/t5/Industrial-Communications/bd-p/260
That forum is monitored by the developer’s of the EtherNet I/P Toolkit. They will be able to assist with the LabVIEW programming.
Regards,
Thomas C.
Applications Engineer
National Instruments

Have Voiceover read dictated commands

I'm helping out a blind relative test out Mac OS to see if it would be better for her than her current Windows setup (she uses JAWS and it is not a great experience).
I've noticed that, separate to VoiceOver, is the ability to dictate commands in the Dictation & Speech section of OS X. So, you can double-tap Fn then just start talking... "Launch Safari.... Open new window.... switch to Pages.... New document...." etc etc. This is great and could be really useful for her but the only problem is that VoiceOver is temporarily disabled while dictation is active! This means that while you are navigating the computer using Dictation, there is zero audible feedback of what you have just done. So there is no way of knowing if saying "Launch Safari" actually worked, and if did, what field the cursor is on.
Does anyone know if my understanding is correct or have I missed a setting somewhere? It would be so great to use Dictation to navigate the computer, and have VoiceOver narrate your progress by telling you where you have got to. The only workaround I've found is to end Dictatation (press Fn again) after every command, at which point VoiceOver kicks in again and says where you are, then double-tap Fn again and repeat, which is a bit clunky.
Thanks in advance for any help/ideas.

When Dictation is on all other sound is muted including systems sounds in response to Kenneth Meier
In order to do that you have to open Terminal and enter these two commands:
defaults write com.apple.SpeechRecognitionCore AllowAudioDucking -bool NO
defaults write com.apple.SpeechRecognitionCore AllowAudioDucking -bool NO
defaults write com.apple.speech.recognition.AppleSpeechRecognition.prefs DictationIMAllowAudioDucking -bool NO
Once you've entered it, turn off dictation in system preferences for a few seconds, then turn it back on. It worked for me.
to restore AudioDucking:
defaults write com.apple.SpeechRecognitionCore AllowAudioDucking -bool YES
defaults write com.apple.speech.recognition.AppleSpeechRecognition.prefs DictationIMAllowAudioDucking -bool YES

Help with reading in command from keyboard

i need to read user response from the keyboard, how should this be done with system.in. or should i used JOptionPane to show input dialog?

Depends on what you want to do.
using System.in:
import java.io.*;
public class rin
public static void main(String[] args)
DataInputStream ins=new DataInputStream(System.in);
try
String cmd =ins.readLine(); //Reading from Keyboard
System.out.println(cmd);
catch (IOException e)
System.out.println(e);
}

Is there a way to intercept 'Mark Read' and 'Read later' commands

I posted this into the wrong forum.
Can these commands be intercepted by a C3PO

They are standard token events
Token ID
BFTKN_MARK_READ or 477
BFTKN_READ_LATER or 352
You will have to combine the C3PO API with the Token API to
gain access to these. This is not something I can help with as I've
never created a C3PO.
Roger Thomas, DevNet SysOp 22
<[email protected]> wrote in message news:pu6wc.6690$[email protected]..
> I posted this into the wrong forum.
>
> Can these commands be intercepted by a C3PO

Command lines for reader

I want to use reader with command lines (to print a document for exemple) without open reader with the mouse.
Is someone knows the solution ?
Thanks

There's no pdf printer provided with reader, so there's no printing command associated with reader specifically. you need Adobe Acrobat for that purpose.
Instead, you can use commands to invoke your system printer and pass a pdf file to it.

Feig LRU 2000 UHF reader - Transparent Command

Similar Messages

Maybe you are looking for