Feild assignment not yet been made

Dear SD Gurus,
Whenever i try to create an access sequence with standard table such as 004 and 005 and assign it to a access. I get following error in Yellow saying "<b>Feild assignment not yet been made</b>". I am trying to create a pricing for an item. Your help will be greatly appreciated. Thank you! in advance.
Cheers
Raji

Hi,
When you are trying to create new access sequence with standard condition tables you should follow the step wise procedure.
1. Check the required condition tables available in T.Code V/04 ( Change)
2. If required condition tables are not avaibale -ceate the table using T.code v/03(create)
3. Go to access sequence ( v/07)
4.give the naming for new access sequence
5. add the table in access
6. select the table entered in the access sequnce
7. finally go to fields tab and check all the tables belongs to condition tables are available.
then save it.
regards,
Naveen Duggineni

Similar Messages

Why has this Z depth expression not yet been made?

I recently had an issue where I needed to composite two objects from a 3d application together on separate layers.. But the objects interact in such a way where sometimes an object from layer A is in front, and sometimes the object from layer B is in front..... But the layer order would give me a result where either A or B is in front the whole time depending which layer is on top in After effects.
(Yes I know in that example you could simply mask it, but in reality there were several objects all dealing with the issue named, and it would have been too complicated to do so.)
So in my search for the answer I found this tutorial...
http://www.digitaltutors.com/11/training.php?vid=22125&autoplay=1
This is a good answer if you're only dealing with two layers... But it doesn't have an answer if you're dealing with any amount of layers more then two.....
Soooo here's my question, why has nobody made a script, option, or button in After Effects yet that simply says "do you want to use the Z depth in your RPF/RLA file to determine where the objects should fit in the scene???"
I ask only because it seems like the most obvious thing to do. If the 3-d application went through the trouble to create the option to have Z depth information, and even has file types that support having that information, then why wouldn't the compositing program have an option to use the information in the most obvious way?

I was just looking more into that! And that seemed like an even better way to go. But I noticed an interesting issue. I'm rendering out of Maya 2012, and found that if I follow Autodesk's tutorial it runs me into an issue...In that youtube tutorial where they explain render passes with the space ship, the instructor adds the various objects to different contribution maps, then the layer with the background he tells maya to make a "beauty pass"....Then in the attribute editor he edits the beauty pass node by clicking on the "hold attribute." This masks out any area where the object is covered!! Great solution.... However this poses two problems for me...
1.That in the compositing program there exists about a one pixel area separating objects.... (This can be solved by duplicating the object, and adding a minmax effect to it, spreading the color out about one pixel, and setting that layer behind the original. But that means you're going to double every layer once, and add an effect to it. Not very efficient as far as render time goes...)....So if you have found a better way to solve this issue, I'm totally open to suggestions!
2.There's the issue that if I have a camera edit.....then I need to go back and re-render each image sequence... This could be ten different objects... And since the parallax changes the shape and alpha, there's nothing that can be done about that. But the real kicker is that if you used the contribution maps, you need to tell maya to batch render each contribution map individually one after the other, and name the image sequence correctly each time replacing your old image sequences....What a pain!! It'd be so much easier if it were just like the render layers... Just check mark each one you want to re-render and click batch render, and then boom! It re-renders each render layer correctly for you where the project is set, no need to re-name or anything... Far more organized. So why don't I just do that instead of using contribution maps you ask? Well that won't give me masked out renders becaus objects on separate render layers don't interact, so that "hold attribute" won't do me any good.
Since I'm new to this, I'm sure there's got to be an easier way to do this, or something that I've overlooked. Let me know if you have any ideas, thanks!

In t-code OBB8 - Short Dump "Field sysmbol has not yet been assigned"

Hi All,
While entering into the transaction OBB8, I am getting the dump "GETWA_NOT_ASSIGNED" "Field Symbol Not yet been assigned" in R/3 4.6c release. If anybody have idea about this please suggest ....
Thanks in advance.
Varsha.

Hi,
This dump is due to code corrections made through the SAP note 933848. To solve this dump, you should apply SAP Note 948961 first, and then apply the SAP Note 948967. Please take help of your ABAP Consultant to apply these SAP Notes. These notes can be accessed through service marketplace (www.service.sap.com).
There is no functional reason assigned for the dump. Code correction is the way to resolve this.
Hope this information helps you.

How to revert back a SAP NOTE? Dump- Field symbol has not yet been assigned

Hi Experts,
We r getting dump(cause: Field symbol has not yet been assigned) in production for ABUMN tx, so, when debugged, it came to know that, the Field symbol is coming from REUSE_ALV_LIST_DISPLAY!!
So, for some reason the system message text is not getting output in ALV-->Dump!!
So, found a NOTE causing this problem!!
So, pls. let me know that, How to revert back this/any SAP NOTE? pls. in detail steps wise!!
thanq
Edited by: Srinivas on Jan 24, 2008 4:32 PM

Hi
In SNOTE tcode, select the Note that you implemented and click on 'RESET SAP Note Implementation'
shylesh

Field symbol has not yet been assigned. ???

Dear Experts ,
W hen i tried to execute my program this error appears :
Short text
    Field symbol has not yet been assigned.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLSLVC" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
Error analysis
    You attempted to access an unassigned field symbol
    (data segment 32821).
    This error may occur if
    - You address a typed field symbol before it has been set with
      ASSIGN
    - You address a field symbol that pointed to the line of an
      internal table that was deleted
    - You address a field symbol that was previously reset using
      UNASSIGN or that pointed to a local field that no
      longer exists
    - You address a global function interface, although the
      respective function module is not active - that is, is
      not in the list of active calls. The list of active calls
      can be taken from this short dump.
and Here is my CODE :
*& Report ZPO
Report ZPO1.
type-pools slis.
PARAMETERS : PO_Doc like EKBE-EBELN DEFAULT '4800000007'.
PARAMETERS : Plant TYPE WERKS DEFAULT '1000'.
PARAMETERS : PO_ORG TYPE EKORG DEFAULT ''.
data TtlS type mara-wesch .
data TtlH type mara-wesch .
data Ttl type mara-wesch .
data ZEKBE type TABLE OF EKBE.
data ZEKBER type EKBE.
data ZEKPO type TABLE OF EKPO.
data ZEKPOR type EKPO.
data ZEKKOR TYPE EKKO.
data ZNAME1F type LFA1-LIFNR.
data ZWGBEZF TYPE T023T-WGBEZ.
data i type n.
data counter type n.
types : begin of SBAGDS,
Serial Type n, "Purchase Order
EBELN like EKKO-EBELN, "Purchase Order
MATNR like EKPO-MATNR, "Material
TXZ01 like EKPO-TXZ01, "Short Text
MATKL like EKPO-MATKL, "Material Group
WGBEZ like T023T-WGBEZ, "Material Group Desc"
SUBMI like EKKO-SUBMI, "GPM
CHARG like EKBE-CHARG, "Batch
LIFNR like EKKO-LIFNR, "Vendor
NAME1 like LFA1-NAME1, "Vendor Name
RECV like mara-wesch, "Received Quantity
REVR like mara-wesch, "Reversed Quantity
DELV like mara-wesch, "Delivered Quantity
end of SBAGDS .
DATA : BAGDS TYPE SBAGDS OCCURS 0 WITH HEADER LINE.
data Struc like BAGDS.
data: gr_table like BAGDS OCCURS 0 WITH HEADER LINE.
data: gt_fieldcat type slis_t_fieldcat_alv, gt_outtab type SBAGDS occurs 0 with header line.
INITIALIZATION.
i = 0.
counter = 0 .
perform field_cat_init using gt_fieldcat[].
FORM field_cat_init using rt_fieldcat type slis_t_fieldcat_alv.
data: ls_fieldcat type slis_fieldcat_alv,
         pos type i value 1.
clear LS_FIELDCAT.
*Column 1
ls_fieldcat-col_pos           = pos.
ls_fieldcat-fieldname        = 'Serial'.
ls_fieldcat-SELTEXT_L      = 'Serial'.
ls_fieldcat-DDICTXT          = 'L'.
append ls_fieldcat to rt_fieldcat.
clear ls_fieldcat.
pos = pos + 1.
*Column 2
ls_fieldcat-col_pos           = pos.
ls_fieldcat-fieldname        = 'EBELN'.
ls_fieldcat-SELTEXT_L      = 'Purchase Order'.
ls_fieldcat-DDICTXT          = 'L'.
append ls_fieldcat to rt_fieldcat.
clear ls_fieldcat.
pos = pos + 1.
*Column 3
ls_fieldcat-col_pos           = pos.
ls_fieldcat-fieldname        = 'MATNR'.
ls_fieldcat-SELTEXT_L      = 'Material'.
ls_fieldcat-DDICTXT          = 'L'.
append ls_fieldcat to rt_fieldcat.
clear ls_fieldcat.
pos = pos + 1.
*Column 4
ls_fieldcat-col_pos           = pos.
ls_fieldcat-fieldname        = 'TXZ01'.
ls_fieldcat-SELTEXT_L      = 'Short Text'.
ls_fieldcat-DDICTXT          = 'L'.
append ls_fieldcat to rt_fieldcat.
clear ls_fieldcat.
pos = pos + 1.
*Column 5
ls_fieldcat-col_pos           = pos.
ls_fieldcat-fieldname        = 'MATKL'.
ls_fieldcat-SELTEXT_L      = 'Material Group'.
ls_fieldcat-DDICTXT          = 'L'.
append ls_fieldcat to rt_fieldcat.
clear ls_fieldcat.
pos = pos + 1.
*Column 6
ls_fieldcat-col_pos           = pos.
ls_fieldcat-fieldname        = 'WGBEZ'.
ls_fieldcat-SELTEXT_L      = 'Material Group Desc'.
ls_fieldcat-DDICTXT          = 'L'.
append ls_fieldcat to rt_fieldcat.
clear ls_fieldcat.
pos = pos + 1.
*Column 7
ls_fieldcat-col_pos           = pos.
ls_fieldcat-fieldname        = 'SUBMI'.
ls_fieldcat-SELTEXT_L      = 'GPM'.
ls_fieldcat-DDICTXT          = 'L'.
append ls_fieldcat to rt_fieldcat.
clear ls_fieldcat.
pos = pos + 1.
*Column 8
ls_fieldcat-col_pos           = pos.
ls_fieldcat-fieldname        = 'CHARG'.
ls_fieldcat-SELTEXT_L      = 'Batch'.
ls_fieldcat-DDICTXT          = 'L'.
append ls_fieldcat to rt_fieldcat.
clear ls_fieldcat.
pos = pos + 1.
*Column 9
ls_fieldcat-col_pos           = pos.
ls_fieldcat-fieldname        = 'LIFNR'.
ls_fieldcat-SELTEXT_L      = 'Vendor'.
ls_fieldcat-DDICTXT          = 'L'.
append ls_fieldcat to rt_fieldcat.
clear ls_fieldcat.
pos = pos + 1.
*Column 10
ls_fieldcat-col_pos           = pos.
ls_fieldcat-fieldname        = 'NAME1'.
ls_fieldcat-SELTEXT_L      = 'Vendor Name'.
ls_fieldcat-DDICTXT          = 'L'.
append ls_fieldcat to rt_fieldcat.
clear ls_fieldcat.
pos = pos + 1.
*Column 11
ls_fieldcat-col_pos           = pos.
ls_fieldcat-fieldname        = 'RECV'.
ls_fieldcat-SELTEXT_L      = 'Received Quantity'.
ls_fieldcat-DDICTXT          = 'L'.
append ls_fieldcat to rt_fieldcat.
clear ls_fieldcat.
pos = pos + 1.
*Column 12
ls_fieldcat-col_pos           = pos.
ls_fieldcat-fieldname        = 'REVR'.
ls_fieldcat-SELTEXT_L      = 'Reversed Quantity'.
ls_fieldcat-DDICTXT          = 'L'.
append ls_fieldcat to rt_fieldcat.
clear ls_fieldcat.
pos = pos + 1.
*Column 13
ls_fieldcat-col_pos           = pos.
ls_fieldcat-fieldname        = 'DELV'.
ls_fieldcat-SELTEXT_L      = 'Delivered Quantity'.
ls_fieldcat-DDICTXT          = 'L'.
append ls_fieldcat to rt_fieldcat.
clear ls_fieldcat.
pos = pos + 1.
endform.
START-OF-SELECTION.
       select SINGLE * from EKKO into ZEKKOR where EBELN = PO_DOC.
       select SINGLE * from EKPO into ZEKPOR where EBELN = PO_DOC.
       select SINGLE NAME1 from LFA1 into ZNAME1F where LIFNR = ZEKKOR-LIFNR.
*         ' Buliding Structure
          Struc-EBELN = ZEKPOR-EBELN.
          Struc-SUBMI = ZEKKOR-SUBMI.
          Struc-LIFNR = ZEKKOR-LIFNR.
          Struc-Name1 = ZNAME1F.
       select * from EKPO into TABLE ZEKPO where EBELN = PO_Doc and WERKS = plant.
       LOOP at ZEKPO into ZEKPOR.
           select SINGLE WGBEZ from T023T into ZWGBEZF WHERE MATKL = ZEKPOR-MATKL .
           counter = counter + 1.
*         ' Buliding Structure
          Struc-Serial = counter.
          Struc-MATNR = ZEKPOR-MATNR.
          Struc-TXZ01 = ZEKPOR-TXZ01.
          Struc-MATKL = ZEKPOR-MATKL.
          Struc-WGBEZ = ZWGBEZF.
*          Calcualting Debit transactions from PO History
           select * from EKBE into table ZEKBE where EBELN = PO_Doc and MATNR = ZEKPOR-MATNR and EBELP = ZEKPOR-EBELP and BWART NOT LIKE '' and SHKZG = 'S'.
           LOOP AT ZEKBE INTO ZEKBER.
               TtlS = TtlS + ZEKBER-MENGE.
           ENDLOOP.
*          ' Buliding Structure
           Struc-CHARG = ZEKBER-CHARG.
           Struc-RECV = TtlS.
           Ttl = TtlS.
           clear TtlS.
*         Calcualting Credit transactions from PO History
         select * from EKBE into table ZEKBE where EBELN = PO_Doc and MATNR = ZEKPOR-MATNR and EBELP = ZEKPOR-EBELP and BWART NOT LIKE '' and SHKZG = 'H'.
           LOOP AT ZEKBE INTO ZEKBER.
               TtlH = TtlH + ZEKBER-MENGE.
           ENDLOOP.
*          ' Buliding Structure
           Struc-REVR = TtlH.
*          Calculating Total Delivered
           Ttl = Ttl - TtlH.
           clear TtlH.
*          ' Buliding Structure
           Struc-DELV = Ttl.
           clear Ttl.
*      Writtng ITAB
       APPEND Struc to BAGDS.
       ENDLOOP.
*      Reading ITAB
*       WRITE : / , 'ITAB Begin : '    .
*       loop at BAGDS into Struc.
*         counter = counter + 1.
*         write : /,'Serial : ',counter.
*         write : / ,'PO : ',Struc-EBELN.
*         write : / ,'Vendor : ',Struc-LIFNR.
*         write : / ,'Vendor Name : ',Struc-NAME1.
*         write : / ,'Material : ',Struc-MATNR.
*         write : /,'Short Text: ',Struc-TXZ01.
*         write : / ,'Model : ',Struc-MATKL.
*         write : / ,'Model Desc : ',Struc-WGBEZ.
*         write : /,'GPM : ',Struc-SUBMI.
*         write : /,'Lot : ',Struc-CHARG.
*         write : /,'Received : ',Struc-RECV.
*         write : /,'Reversed : ',Struc-REVR.
*         write : /,'Delivered : ',Struc-DELV,/,/,/.
*       ENDLOOP.
* Call ALV Grid Viewer
*BREAK-POINT.
gr_Table[] = BAGDS[].
   CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
        EXPORTING
             I_STRUCTURE_NAME   = 'SBAGDS'
             IT_FIELDCAT          = gt_fieldcat[]
        TABLES
             T_OUTTAB                  = gr_Table.
Please Advise
Edited by: Sap Sap on Jul 27, 2009 12:18 PM
Edited by: Sap Sap on Jul 27, 2009 12:22 PM
Edited by: Sap Sap on Jul 27, 2009 12:22 PM

Hi,
The problem seems to be in your ALV grid display.
The reason must be your field catalog.
Just check your fieldcatalog.
The value in the fieldname field of the fieldcatalog should be same as the fieldname in your internal table and should be in capital letters.
Probably you must have mistyped some field.
Kinldy check.
Regards,
Ankur Parab

RUn time error while saving po    Field symbol has not yet been assigned.

Hi Experts,
I am getting abap dump while saving PO in ME21N plz seee the below dump plzzzzzzzzzzzzzzzzzzzzz help me
Runtime Errors         GETWA_NOT_ASSIGNED
Date and Time          19.06.2009 11:24:46
Short dump has not been completely stored (too big)
Short text
     Field symbol has not yet been assigned.
What happened?
     Error in the ABAP Application Program
     The current ABAP program "SAPLKKBL" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Error analysis
     You attempted to access an unassigned field symbol
     (data segment 106).
     This error may occur if
     - You address a typed field symbol before it has been set with
       ASSIGN
     - You address a field symbol that pointed to the line of an
       internal table that was deleted
    - You address a field symbol that was previously reset using
      UNASSIGN or that pointed to a local field that no
      longer exists
    - You address a global function interface, although the
      respective function module is not active - that is, is
      not in the list of active calls. The list of active calls
      can be taken from this short dump.
How to correct the error
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "GETWA_NOT_ASSIGNED" " "
    "SAPLKKBL" or "LKKBLF99"
    "GEN_FIELD_OUT2"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
   In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
em environment
SAP-Release 700
Application server... "gplqty"
Network address...... "128.12.0.19"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "8x AMD64 Level"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "GPLQTY"
Database type..... "MSSQL"
Database name..... "GPQ"
Database user ID.. "gpq"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Aug 4 2008 02:33:25"
create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
Database version. "SQL_Server_8.00 "
Patch level. 172
Patch text.. " "
Database............. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
   NT 6.0"
Memory consumption
Roll.... 16192
EM...... 16759360
Heap.... 0
Page.... 237568
MM Used. 12036016
MM Free. 530432
er and Transaction
Client.............. 410
User................ "SAP_SUPPORT"
Language key........ "E"
Transaction......... "ME21N "
Transactions ID..... "9E955CDE97CBF1648B4C001A64C7B85A"
Program............. "SAPLKKBL"
Screen.............. "SAPLKKBL 0500"
Screen line......... 3
Information on where terminated
    Termination occurred in the ABAP program "SAPLKKBL" - in "GEN_FIELD_OUT2".
    The main program was "RM_MEPO_GUI ".
    In the source code you have the termination point in line 2908
    of the (Include) program "LKKBLF99".
Source Code Extract
Line SourceCde
2878       else.
2879         assign <fs11> to <field>.
2880         gs_fc = gs_sfc11.
2881       endif.
2882     when 012.
2883       if gs_out_flags-slave ne 'X'.
2884         assign <fm12> to <field>.
2885         gs_fc = gs_mfc12.
2886       else.
2887         assign <fs12> to <field>.
2888         gs_fc = gs_sfc12.
2889       endif.
2890     when 013.
2891       if gs_out_flags-slave ne 'X'.
2892         assign <fm13> to <field>.
2893         gs_fc = gs_mfc13.
2894       else.
2895         assign <fs13> to <field>.
2896         gs_fc = gs_sfc13.
2897       endif.
2898     when 014.
2899       if gs_out_flags-slave ne 'X'.

Hi,
this error occurs when you try to address a field-symbol before it has been assigned to a field or
the assignment has failed.
Use following code to remove this dump
Assign <mara-matnr> to <fs>.
if sy-subrc <> 0.
Error Message.
Endif.
Hope it helps,
Raj

Error While Executing Report - "Field symbol has not yet been assigned."

Dear All,
I am using Cube 0PP_C01 which filled with data Source 2LIS_04_P_MATNR.
Based on this Cube I had developed a report.
0MRP_CONTRL characteristic filled using 0MATERIAL master data.
Authorization in this report is based on Characteristic 0MRP_CONTRL & 0PLANT.
While running report User gets error u201CField symbol has not yet been assignedu201D & Analyzer just quit.
Also getting dump in tcode ST22.
This problem occurs when limited authorization of 0MRP_CONTRL & 0PLANT assigned to user & if I provide full authorization 0BI_ALL then report runs fine.
When I will remove 0MATERIAL characteristic from report then Report runs fine & at a time when I put 0MATERIAL in the report its gives error.
Please suggest me what to do as I can not give user 0BI_ALL right in RSECADMIN.
Please help.
Regards,
Divyesh Khambhati.

Hello Shashank,
Thanks for your reply.
No material is not checked for authorization relevant.
Is it required to make 0MATERIAL to be checked as Authorization relevant ??
I had make 0MATERIAL authorization relevant & assign all material Authorization to User but still error coming..
I do not have any idea regarding this colon authorization, if possible can you explaine me how I can use this colon authorization ?
Divyesh Khambhati
Edited by: Divyesh M Khambhati on Oct 2, 2010 10:29 AM

I cant download from appstore. I made my apple Id but when I try to download from app store it says this id has not yet been used in itunes. what should I do?

I cant download from appstore. I made my apple Id but when I try to download from app store it says this id has not yet been used in itunes. what should I do?

Follow the on screen instructions to set up an iTunes account using your Apple ID.

For 2 Zfields in Web UI, BSP err: Field symbol has not yet been assigned.

Hi,
I've created 3 ZFields (F1, F2, F3) in EEWB. I've assigned F1 in the configuration of Component WB (available fields to displayed fields). I can see ZField F1 in the Web UI.
But when i assign other 2 ZFields F2 & F3 in the configuration & check in Web UI, it showing the below error:
"Field symbol has not yet been assigned."
Anyone faced the similar issue, pls share the solution to fix this.
tnx in adv.
rgds,
balu

Hi there,
I think the problem is with the cookie handling. Cookies are really just raw data that needs to be placed into ABAP structure. This is something like the way I would do it....
Save Cookie
DATA: cookie type xstring.
EXPORT it_favourites FROM it_favourites TO DATA BUFFER cookie.
CALL METHOD cl_bsp_server_side_cookie=>set_server_cookie
    EXPORTING
      name                  = sy-uname
      application_name      = application_name
      application_namespace = application_namespace
      username              = sy-uname
      session_id            = session_id
      data_name             = 'COOKIE_ID_43CASE2'
      data_value            = cookie
      expiry_date_rel       = 7
      expiry_time_rel       = 0.
Retrieve cookie
CALL METHOD cl_bsp_server_side_cookie=>get_server_cookie
    EXPORTING
      name                  = sy-uname
      application_name      = application_name
      application_namespace = application_namespace
      username              = sy-uname
      session_id            = session_id
      data_name             = 'COOKIE_ID_43CASE2'
    CHANGING
      data_value            = cookie.
IF cookie IS NOT INITIAL.
    TRY.
        IMPORT it_favourites = it_favourites FROM DATA BUFFER cookie.
      CATCH cx_root INTO oref.
        " Error handling
    ENDTRY.
ENDIF.
Cheers
Graham Robbo

RFC_ERROR_SYSTEM_FAILURE: Field symbol has not yet been assigned.

I am on the newest patches for basically all things related to BI, and some of them are giving me trouble. The problem I am now encountering is when I try to jump from my Purchasing Query to my Purchasing Line Items Query, I get an error, stating RFC_ERROR_SYSTEM_FAILURE: Field symbol has not yet been assigned. Does anybody know what this means? I haven't changed either query recently, and it was working just fine.
Any help is appreciated.
Thanks,
Owen

Hi
Record a RSTT trace by refering to the note : 899572, and then execute the trace in RSTT.If will throw a dump and chekc where the issue is.It is difficult to say why the error has occured just from teh error "RFC_ERROR_SYSTEM_FAILURE: Field symbol has not yet been assigned."
Regards, Hyma

I just made my apple account today and when i tried hen i to install a app my email and my password didn't work it just said like '' this apple id has not yet been used before in itunes store''

i just made my apple id today abut when i tried to install a app from my iphone it didn't work it just said '' this apple id has not yet been used before in itunes store'' i hope u can help me ...thx

If you haven't already created an account in the app store:
Scroll down to the bottom of the FEATURED page touch APPLE ID and CREATE ACCOUNT
If you have already created an account in the app store:
First of all, double check you're spelling the password right.
If you're sure it's not the password, scroll down to the bottom of the FEATURED page in the App Store on your iPhone, touch APPLE ID: and then VIEW ACCOUNT and make sure you have the correct card details and billing address on your account.
Also, connect your iPhone to your computer, then log in to the iTunes store in iTunes on your computer and check all your details. After you've updated your details sync your iPhone.
If you still can't get it to work, book an appointment with a genius at your nearest Apple Store. They should be able to solve whatever the problem is.

How can i analize and solve Table /BI0/XCOMP_CODE has not yet been analyzed

Hi All,
i made a cube and among its chars is 0COMP_CODE, but the statistics appears in red, and the performance of the query is really bad, now in the TR RSRV i tried to solve it, in:
All Elementary Tests - Database -Database Statistics for an InfoCube and Its Aggregates
And appeared this message, i took the 0COMP_CODE in "Check Master Data for a Characteristic" and this doesnt tell me about something wrong, and now i dont know how can i solve this:
Message:
ORACLE: Table /BI0/XCOMP_CODE has not yet been analyzed
Message no. RSCV520
Diagnosis
Table /BI0/XCOMP_CODE has not yet been analyzed. There is, therefore, no statistical information in the database optimizer. This can lead to bad run schedules and, as a result, poor performance levels.
Procedure
Analyze table /BI0/XCOMP_CODE. Use a repair routine that is assigned to this analysis routine (function Remove error in transaction RSRV).
Help...

About "run your query using display run schedule. There your IOBJ field will come in yellow - click on the same and select analyze from the window that pops up..."
Hi Arun,
i did it, i clicked analyze, this take me to other window, the IO not appear, i suppose it doesnt appear because 0COMP_CODE is part of the cube, but the query that i execute in the RSRT with display run schedule doesnt has this IO, but anyway in the next screen when i clicked Analyze, i execute the table /BI0/XCOMP_CODE and it said, was succesfull, i go to the RSRV to check if the problem was solved, but its still in red, i dont know if there is something more to do in the window "Analysis of oracle tables for creating statistics"
i dont know what else can you tell me or i m doing something wrong?

While trying to upgrade to mavericks I received the following error during download "OS 10.9 has not yet been approved for software upgrade. Thanks! -SWN IT"

Hello, I am trying to upgrade an iMac to Mavericks. At the end of the download phase, a message pops up that says
"OS 10.9 has not yet been approved for software upgrade. Thanks! - SWN IT"
The download stops, and I cannot resume. Made several attempts to start the process of downloading again and receive the same message/error.
I am not familiar with any software that has the intials SWN or have SWN in the title.
Does this error look familiar to anyone?
Any clues as to how to find out the what application could be sending this message would be greatly apprciated.

Is this on a Mac that belongs to a company or did you buy it used?

Error "this apple id has not yet been used with the itunes store" when login from itune

when i go to itune and login via apple id there is error "this apple id has not yet been used with the itunes store"
how i can solve it..

I'm having the exact same issue as the two of you. I linked my paypal, I made a whole new Id, nothing works. I've emailed the support team @ Express Lane, and I'm waiting to hear from them. Have either of you gotten help with this issue?

When i try to authorize by computer its saying that "This Apple ID has not yet been used with the iTunes Store."

When i try to authorize by computer its saying that "This Apple ID has not yet been used with the iTunes Store." please someone help me

I had this same problem today. I have been battleing it for the past 5 hours, but it worked. You have to create a new account though.
What I did was go to iTunes and click Sign in, then made a new account.
But I didn't want to put in a Credit Card number, so what I did was
Open iTunes
Go to iTunes Store
Search a totaly free app. (I used Google Earth)
Click on the app from the list
Click the button under the icon that says "Free App"
Then it will ask you to sign in or make a new account, Select Make New Account
Follow All the steps on all the pages.
When you get to the page that you select your Credit Card, check "None"
Fill in the rest of the info and then click Complete
Verify your email
I hope this helped you. Strangely, you can only select "None" Under Credit Card if you do it this way. Must be some iTunes bug.

Feild assignment not yet been made

Similar Messages

Maybe you are looking for