FERT - PRT - EQUIPMENT FOR TOOL MAINTENANCE USING PM CONCEPT.
Hello,
I need to convert the finished product (produced in our toolroom) to PRT and maintain them as equipment. By this the maintenance cost can be easily captured for these equipment PRT.
It will be helpful if anyone can guide me for step by step prcedure.
Hey Maheshwaran,
Thanks for your reply, but I found my answer. I wanted to get exact equipment number that is used as PRT in order which I found as below:
From Table VIAUFKST with respect to a particular AUFNR i got AUFPL which i used in table AFFH and got OBJID which further I used in table CRVE_B and got EQUNR that is the exact equipment number I wanted in my report.
Thanks once again.
Similar Messages
-
Material PRT or Material Tools to use? or...?
Hi Gurus,
Need your advice.
User have many PRTs (1 assembly may use 1000 type of PRTs).
Purchase lead time about 6 weeks.
User requirement are:
1. They need to know whether they have the required PRT or not; is the quantity sufficient or not.
2. They need to know when to buy these PRTs, and how much to buy (optimum quantity, don't want to over purchase, based on the production volume)
3. They don't want to consume / GI the material during backflush
4. They don't want it to be costed to the production order or anywhere (once the PRT can't be use, then it'll be scrapped).
Is there a way to accomodate these requirements?
Should I use material PRT, or material Tools? Or, is there any other option?
Thank you.Hi,
You can use the FM BAPI_OBJCL_GETDETAIL...
Check this thread.
Re: need to know a function that gives value of characteristic for mat.classifi
Also please search in SCN...I am sure you will get lot of forums...which already discuss about this..
Thanks
Naren -
Tools and spares used for machine maintenance -table and fields -reg
Hi,
for a machine while attending breakdowns we use some spares and tools
which table of SAP stores this data like
for the equippment -
this notification /order ........ which spares/ tools are used ...........cost center to which these are issued
regards,
madhu kiranHi,
How to explore the given link ?
where the relevant information i have asked for can be seen ?
regards,
madhu kiran -
PP and PM integration for PRT equipment
Hi,
i got integration issue when implementing PP and PM.
i used PRT equipment with counter, PP confimation will update the counter.
If it reach some value it is overhaul and maintenance order created.
1, if it is overhaul, can i automatically set the PRT so it is not available (status)
2. can PP people know this and the they reschedule the PP order and it schedule automatically considering the maintenance order for the PRT equipment they use.
after PRT equipment i will user work center as equipment too and then we will have botj issue as above
is it really possible for pp and pm integration like this.
please kindly help.
best regards,
Freddy Hahi
In the normal process once your production order is confirmed ,your maintenance order from plan will be triggered ,but your PRT status is in release only which will not be updated as LOCK automatically .it can be locked manually in the Master data.
check with abaper whether it is possible to update the status using measurement document ,for say once it reaches 2000 pc
Once the status is locked it cannot be used for maintenance or production order
for Workcenter as equipment then you can process with System condition as Not in operation which will show the maintenance order while checking the production order planning table
regards
thyagarajan -
Produce equipment for internal use (cost center)
Hi,
We are a high tech company selling and producing configurable equipment.
Sometimes our marketing department orders such an equipment for demo reasons. After this demo the equipment must be returned to be disassembled or returned into stock until it is needed in another demo or by our engineering department. In other words we would like to produce equipment and have them in stock until a cost center needs it. We think we have some solutions to counter this problem :
- using a dummy customer in SD (--> our finance department is not in favour of this). If the equipment returns we can make a return and put it into stock.
- create an independent requirement using transaction MD81. If a cost center needs it we do a goods issue (more difficult to keep track on things)
-create a planned order
Are there other solutions ? If not which one do you prefer and why ?
Also these equiments sometimes needs to be repaired or modified. We use the module CS (customer service) to do repairs for customers but in this case we are our own customer. The idea of using a dummy customer is not preferred by our finance department. Can we use the module PM (plant maintenance) for this ?
Thanks for the help.
with regards
Erik> our own customer. The idea of using a dummy customer
> is not preferred by our finance department. Can we
> use the module PM (plant maintenance) for this ?
Yes, of course. You can. Pls see my earlier answers. -
One order for several maintenance equipment
Hi
Is it possible on SAP-PM to create an order for several equipment
Thinkshi
The object list is a central part of the order. You use it to assign technical objects, notifications or objects, which are identified by a combination of material and serial numbers, to the order.
When you make entries in the object list for an order, you are linking it to the objects you enter. When you make entries in the object list for an order, you are linking it to the objects you enter.
Even if no reference object has been entered for the order on the header data screen, you can still assign technical objects, notifications or objects, which are identified by a combination of material and serial numbers, to the order in the object list
Two features are available for the object list:
An object list, in which you can enter technical objects (equipment, functional locations, assemblies) and notifications
An object list, in which you can enter objects, which are identified by a combination of material and serial numbers, and notifications
Which of these two versions is used in the order depends on:
The choice of reference object in the notification/order
The view setting for the Reference object frame in the notification/order
If you create the order with reference to a notification, for which a reference object has been entered, the system copies the reference object from the notification as the reference object for the order. The system writes the notification number in the order header and in the object list for the order.
You can group together several notifications that can be processed together using a "worklist for notifications" for a maintenance or service order. In this case, the notifications are also included in the object list of the order
check
http://help.sap.com/saphelp_erp2005/helpdata/en/5b/ae2ed74b8611d182ba0000e829fbfe/content.htm
-ashok -
Tools for mac maintenance? imac quite slow
are there any good free tools (or out of the box ones) for mac maintenance? my imac seems to have slowed down considerably over the last months, and i'm wondering if i can do anything to scan/repair. I know a usual answer is buy more RAM, but hoping to avoid that if possible. here's what i got for output from etrescan:
EtreCheck version: 1.9.15 (52)
Report generated October 4, 2014 at 9:45:31 AM PDT
Hardware Information: ?
iMac (21.5-inch, Mid 2011) (Verified)
iMac - model: iMac12,1
1 2.5 GHz Intel Core i5 CPU: 4 cores
4 GB RAM
Video Information: ?
AMD Radeon HD 6750M - VRAM: 512 MB
iMac 1920 x 1080
System Software: ?
OS X 10.9.5 (13F34) - Uptime: 7 days 23:43:18
Disk Information: ?
ST3500418AS disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (40.6 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
OPTIARC DVD RW AD-5690H
USB Information: ?
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. iPod
Apple Computer, Inc. IR Receiver
Apple Internal Memory Card Reader
Firewire Information: ?
Seagate GoFlex Pro Mac 800mbit - 800mbit max
S.M.A.R.T. Status: Verified
EFI (disk1s1) <not mounted>: 209.7 MB
FreeAgent GoFlex Drive (disk1s2) /Volumes/FreeAgent GoFlex Drive: 499.76 GB (13.53 GB free)
Thunderbolt Information: ?
Apple Inc. thunderbolt_bus
Gatekeeper: ?
Mac App Store and identified developers
Kernel Extensions: ?
[loaded] com.Cycling74.driver.Soundflower (1.6.6 - SDK 10.6) Support
[loaded] com.logmein.driver.LogMeInSoundDriver (1.0.0) Support
Problem System Launch Daemons: ?
[failed] com.apple.AOSNotificationOSX.plist
[failed] com.apple.wdhelper.plist
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.google.keystone.daemon.plist Support
[not loaded] com.logmein.logmeinserver.plist Support
[loaded] com.logmein.raupdate.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
Launch Agents: ?
[loaded] com.divx.dms.agent.plist Support
[loaded] com.divx.update.agent.plist Support
[loaded] com.google.keystone.agent.plist Support
[running] com.logmein.logmeingui.plist Support
[not loaded] com.logmein.logmeinguiagent.plist Support
[not loaded] com.logmein.logmeinguiagentatlogin.plist Support
User Launch Agents: ?
[failed] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
[loaded] com.valvesoftware.steamclean.plist Support
[running] com.victorpimentel.TVShowsHelper.plist Support
[loaded] uk.co.markallan.clamxav.freshclam.plist Support
User Login Items: ?
Skype
ClamXavSentry
ClamXav
Internet Plug-ins: ?
LogMeInSafari64: Version: 1.0.586 Support
OVSHelper: Version: 1.1 Support
Default Browser: Version: 537 - SDK 10.9
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
DivX Web Player: Version: 3.2.3.1164 - SDK 10.6 Support
LogMeIn: Version: 1.0.586 Support
Flash Player: Version: 15.0.0.152 - SDK 10.6 Support
LogMeInSafari32: Version: 1.0.586 Support
CitrixICAClientPlugIn: Version: 11.4.3 - SDK 10.0 Support
QuickTime Plugin: Version: 7.7.3
GarminGpsControl: Version: 4.0.2.6 Beta - SDK 10.6 Support
SharePointBrowserPlugin: Version: 14.4.4 - SDK 10.6 Support
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
Safari Extensions: ?
Ultimate
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins ?
WebEx64: Version: 1.0 - SDK 10.6 Support
3rd Party Preference Panes: ?
Flash Player Support
Perian Support
TVShows Support
Time Machine: ?
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 464.96 GB Disk used: 427.15 GB
Destinations:
FreeAgent GoFlex Drive [Local] (Last used)
Total size: 465.44 GB
Total number of backups: 82
Oldest backup: 2013-04-25 15:05:03 +0000
Last backup: 2014-09-28 06:42:19 +0000
Size of backup disk: Too small
Backup size 465.44 GB < (Disk used 427.15 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU: ?
3% WindowServer
2% Finder
0% coreaudiod
0% iTunes
0% fontd
Top Processes by Memory: ?
168 MB iTunes
135 MB softwareupdated
74 MB Google Chrome
74 MB Messages
70 MB mds_stores
Virtual Memory Information: ?
904 MB Free RAM
935 MB Active RAM
512 MB Inactive RAM
941 MB Wired RAM
15.36 GB Page-ins
6.45 GB Page-outs
Thank you in advanceI addition to running less concurrent processes or installing more RAM as Kappy mentioned.
I also see that you have less than 10% of free space left on your HDD.
Disk Information: ?
ST3500418AS disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (40.6 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
Which is fairly low and forcing it to work on the slowest part of the HDDs platter. -
What to use for System Maintenance???
There are so many apps for cleaning up your system:
Tiger Cache Cleaner
Ice Clean
Onyx
Cocktail
Maintenance
(maybe more that i haven't heard anything about...?)
can anyone give me a recommendation?
what are the advantages/disadvantages of each?
What do you use? Why?
Any feed back will be appreciated.
Thank you!
MacBook Pro Mac OS X (10.4.8) 2 GB RAM, 200 GB HDDKappy's Personal Suggestions for OS X Maintenance
For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utilities are: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.0 is now Intel Mac compatible. TechTool Pro provides additional repair options including file repair and recovery, system diagnostics, and disk defragmentation. TechTool Pro 4.5.2 is Intel Mac compatible; Drive Genius is similar to TechTool Pro in terms of the various repair services provided. The current version, 1.5.1, is Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep.
OS X automatically defrags files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems.
I would also recommend downloading the shareware utility TinkerTool System that you can use for periodic maintenance such as removing old logfiles and archives, clearing caches, etc.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the commandline.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Retrospect Desktop (Commercial - not yet universal binary)
2. Synchronize! Pro X (Commercial)
3. Synk (Backup, Standard, or Pro)
4. Deja Vu (Shareware)
5. PsynchX 2.1.1 and RsyncX 2.1 (Freeware)
6. Carbon Copy Cloner (Freeware - 3.0 is a Universal Binary)
The following utilities can also be used for backup, but cannot create bootable clones:
1. Backup (requires a .Mac account with Apple both to get the software and to use it.)
2. Toast
3. Impression
4. arRSync
Apple's Backup is a full backup tool capable of also backing up across multiple media such as CD/DVD. However, it cannot create bootable backups. It is primarily an "archiving" utility as are the other two.
Impression and Toast are disk image based backups, only. Particularly useful if you need to backup to CD/DVD across multiple media.
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac Maintenance Quick Assist.
Referenced software can be found at www.versiontracker.com and www.macupdate.com.
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values. -
Table for Preventive Maintenance Generated Maintenance Orders for Equipment
Dear All,
I want to Extract no of Preventive Maintenance Orders (PM02) for a month (according to Planned Date) for a set of Equipments.
Which table I should refer so i wll get the Orders with specific order type , for specific equipments for a month ( Date Range).
With best regards,
Narendrafor that use the following tables for report generation:
AFIH : for equipment number selection and order numbers
AUFK: For order dates and other data
T003P: for order type.
In a single you will not get all the answers. You have to join three four table for this. try using these tables. Or also you can create a query for this using SQ01. -
Test scripts for oracle applications using qtp testing tool
hi
i want some test scripts for oracle applications using qtp testing tool
regardsYou will need to create separate scripts for Load testing. The functional scripts cannot be used in OLT. The exceptions to this would be the "General" items (Java Code Script & Web Services) which can also be used in OLT.
e.g. Instead of selecting "Functional Testing - Oracle EBS/Forms"
select "Load Testing (Protocol Automation) - Oracle EBS/Forms"
Once you get into load testing you'll realise that you want to create very specific scripts and won't want to try re-using functional scripts. I know a lot of such tools are 'sold' on the fact that functional scripts can be re-used for load, but when it comes down to it you'll want to design your load scripts seperately anyway! -
Which tool is used for database designing
Hi,
Can you please share which tool is used for database(Oracle) designing most
ThanksKim Berg Hansen wrote:
Personally I use brain, pen and paper for designing/modelling - then simply write scripts to create those tables.Me too.
But of course I realize that is not the way of a modern programmer :-)No, modern programmers rely less on the brain part.
I have heard other people saying that the (now free) [url http://www.oracle.com/technetwork/developer-tools/datamodeler/overview/index.html]SQL Developer Data Modeler is helpful for modelling. I haven't any personal experience, though.
I have used it to reverse engineer the design resulting from the brain / pen / paper / scripts process and produce pretty pictures for the modern programmers to try and understand. It works quite well for this. -
Tool Tip for VO attribute using Groovy
Hi All,
I was wondering how to use groovy for Tool Tip of a view object attribute.
What I am basically looking for is return the String from a RowImpl class method and set it as a Tool Tip text.
my method:
public String applyToolTip(){
return "This is my Tool Tip";
Groovy used for Tool Tip Attribute
adf.object.applyToolTip()
also tried with,
adf.object.viewObject.applyToolTip()
None of them work. Also I tried writing the same method in VOImpl class. No luck.. Please help with explanation.
Thanks.Hi,
Groovy is not used throughout ADF BC. It can be used in validation and to define default values to an attribute but not for UI hints. For tool tips you would use message bundles (assuming your question is towards internationalization). Tool tips are defined on the AttributeDef of a View Object attribute and thus not defined per VO instance.
Frank -
Which tools can use for XSLT mapping?
which tools can use for XSLT mapping?
Hi,
Altova map force tool , u will get it for 1month trial.and later you can create xslt mapping in notepad itself.
reg,
avinash M -
What tools to use developing JAX-WS for AS 10.1.3
Hello,
now I use JDeveloper 10.1.3, but I see it lacks some features (for example, I'd like to see JAX-WS development support).
I develop applications for Application Server 10.1.3 (as this is the latest stable version too), but I'd like to use JAX-WS there. as this is the latest technology.
I know, i can deploy JAX-WS for 10.1.3.4 with some efforts.
But what is the best tool to use for development? JDev 10.1.3 - a lot of "coding by hand", Jdev 11 TP4 - maybe, not stable, and how to test - with JDev 11 TP4 embedded OC4J? And then try to deploy to AS 10.1.3? Or, maybe, better to use other IDE, that supports JAX-WS? At the end, I need to deploy to AS 10.1.3.4.... Any ideas?Hi,
JAX-WS requires a Java EE runtime environment, and AS 10.1.3 has a Java EE 1.4 runtime environment, which means that JAX-WS wont run here. JDeveloper 11, though in Technology Preview" allows you to build JAXWS web services. However, the deployment still requirs Java EE 1.5
Frank -
Asking for permission to use a iPhone prototype in our Prototyping Tool
Hello,
We are a company in Barcelona called Justinmind (http://www.justinmind.com ). We are developing a software prototyping tool called Visual Prototyper. With this software you can prototype easily and fastly your applications before you start the development process. In our predesigned examples we would like to include an iPhone template, to help to prototype iPhone software.
For this reason we emailed 2 weeks ago to apple asking for permission to use this example in our software. We received an automatic message saying thtat we would be hearing from apple in 3 business days, but we still waiting for an answer.
Anyone know if this is possible or what we have to do to receive an answer?
thanks very much!
SergiHi,
Thanks for the idea! I need to update my .sig profile - I'm currently running 10.6.4, and as far as I know, all my other software and apps (including Firefox) are up to date.
Huxley
Maybe you are looking for
-
Crystal ActiveX Report Viewer Control 11.0 not exporting to excel
I have a wierd problem, I have crystal report XI R2 installed on the server. Client when login on the my application gets prompt to install the activx control; installing of which the report is opening fine. Whenever the user clicks on the "Export to
-
Hi Experts, I wanted complete notes on SAP-BI 7.0, which talks about the background process and also the flow of it, immediately. Awaiting to hear from you. cheers, CHK
-
Curious effect of plugging in AC power
Hi I have a Lenovo Thinkpad T510 I am experiencing a curious problem. Video runs perfectly with the power cable unplugged, but when I plug it in it becomes very jerky. The problem is not merely video playback, but, for example, scrolling in web bro
-
Installing OAS 10.1.3 and Database 10.2 on same host
I am trying to install 10g R2 and OAS 10.1.3 on same host(linux 2.6.9.-11.ELS). Database installation went fine but OAS is not coming up. Netstat shows all the ports are used. I followed all the instructions for Database and OAS. Is this a 2 tier con
-
Heya., Been running my Neo4 Ultra Plat. since they first came out. This is a PCB v1.0. Thought i'd pop a Opty 175 in it and test drive it. It's running the latest 1D bios and all the most recent drivers. It's really odd Corecenter installs fine and