PP and PM integration for PRT equipment

Hi,
i got integration issue when implementing PP and PM.
i used PRT equipment with counter, PP confimation will update the counter.
If it reach some value it is overhaul and maintenance order created.
1, if it is overhaul, can i automatically set the PRT so it is not available (status)
2. can PP people know this and the they reschedule the PP order and it schedule automatically considering the maintenance order for the PRT equipment they use.
after PRT equipment i will user work center as equipment too and then we will have botj issue as above
is it really possible for pp and pm integration like this.
please kindly help.
best regards,
Freddy Ha

hi
In the normal process once your production order is confirmed ,your maintenance order from plan will be triggered ,but your PRT status is in release only which will not be updated as LOCK automatically .it can be locked manually in the Master data.
check with abaper whether it is possible to update the status using measurement document ,for say once it reaches 2000 pc
Once the status is locked it cannot be used for maintenance or production order
for Workcenter as equipment then you can process with System condition as Not in operation which will show the maintenance order while checking the production order planning table
regards
thyagarajan

Similar Messages

  • FM or BAPI to change Maintenance plant and Planning Plant for an equipment

    Hi Experts,
    I need to change the Maintenance plant and Planning Plant for an equipment. Is there FM or BAPI available for the same?
    Thanks,
    Peri.

    what doesn't it do the same ? it contains planning plant and maintenance plant which you can update ??
    if you expect that SAP delivers custom functions for every possible question a developer has you can better search for an other job. SAP makes generic functions and you can use them for you're own sollutions.
    it is also expected that you try to work things out for you're own sollution.
    you can find sample code quickly enough if you search where the function is used
    like RISTEQ01
    kind regards
    arthur

  • Issue in Application Module and Enterprise Integration for SAP applications

    Hi,
    When I enabled the Application Module and Enterprise Integration for SAP applications Version 2.60 Patch 2 I am getting error in defect entity and Application Module. Does any one face this issue? Please let me know the solution.
    QC details:  QC 11.0 with patch 7
    I followed the steps given in ALM addin page to install the adapters
    Attached Screen shots of the Error

    Hi
    If you are wanting to know how to configure ESSO to be used to logon to SAP applications then there is a guide in the helpfile of the admin console. Simply do a search for SAP.
    In short ESSO-LM comes with a SAP helper object which needs to be selected on install. To enable the ESSO SAP helper to interact with SAP, the SAP server and the SAPGUI client need to be configured. The details for this are in the helpfile. If you have multiple SAP systems launched from the SAPGUI then this is the best method because it means ESSO can distinguish between the different SAP systems through matching screens
    If you have only one SAP system and you do not want to configure the SAP server then you could use send keys and not use the SAP helper object at all.
    Hope this helps

  • Table for PRT Equipment  Release or Locked Status

    Hi Friends,
    In Equipment master, PRT data view, Release PRT or Lock PRT  button is there.
    Where i can take this status (Released or Locked )  ?
    Thanks

    Hi,
    If you check u201CIE02u201D for any equipment, Production Resource / Tool (PRT) status is by default in Locked Positionu201D.
    This status controls the usage of PRT in the functional application i.e. planning and production.
    The status allows you to release production resource/tools for different tasks when maintaining master data.
    If it is released can be used in the task list or order.
    Regards
    DSR

  • Workflow and POWL integration for Travel Request / Approval

    HI,
    We are on EHP7 and using POWL  for different kind of Approvals.
    POWL is working good for Leave Approval and we have used Workflow Task ID as : TS12300097 / TS12300116, and all leave request appearing in POWL for manager and approving them.
    Now we have to use POWL for Travel Request / Travel Expense approval and need to know what Task IDs I should use to configure this under SPRO.
    Few tabs / links created like Travel Req Approval / Expense Approval / Claim Approval in POWL and need to show entries in respective tabs.
    Thanks

    HI
    Is it required to run FPB_MAINTAIN_PERS_S / FPB_MAINTAIN_PERS_M to display Travel entries in POWL screen.
    2) Is it required to keep entries under "Assign Task IDs to POWL Types" in SPRO ???
    ex : MANAGER_MSS_INBOX    MSS_POWL_LEA_APPROVAL    TS12300097
    I don;t see any difference in terms of functionality even If i delete above entry, may i know the necessity of having those entries ?
    Thanks

  • Pp and pm integration for capacity planning

    Dear ALL,
    Just now i started integration testing between pp and pm.
    As we know PM equipment is work centre for PP.Suppose there is 1 machine MAC-1 for which i created maint. order  also i ticked Sys. condition in MO and by using  the same  machine , Prd.dept is created Prod. Order.
    But as per std. scenario , SAP should show that this  capacity is not available for pp but in our case it is not happening and capacity is available  here.
    I would like to know is there any thing  missing from my side.
    Awaiting for your valuable suggesation.

    In Equiment Bom, enter PP workcenter. When you make MO it will not give you an alert. But while your leveling your capacity MO will appears that Work Centre will be on Maintenance from --- to date.
    If it helps, kindly give points.
    Regards,
    RM

  • Calibration for PRT equipment

    Hi Gurus,
                    My client want calibration frequency is base on the usage of the PRT.
    For that we are maintaining the serial number but how can i define the frequency on base of serial number.
    please help me,
    Regards,
    Sbabu.

    As per my knowledge there is no direct relationship which can be established in between the fruency & serial number.You have to first of all define the PRT as Equipment master & not as Material master (FHMI)
    In order to establish the relation you have to make a std format/rule like for this serial number this will e the frequency.(That means only manual control & deciplin can be established)

  • Win-ca and ipad integration for vpn

    Hi Guys,
    I m trying to configure certificate based vpn for our office . we have ipad ,windows  2k3 standalone ca with scep componet installed on it .
    I am using iphone confiration utility(icu) for configure ipad . Ipad using corprate wifi to enroll them self to certificate server
    I can obtain password from CA url to bigin enrollment process and then problem starts .
    Use this passowrd in icu to enroll and I get two error on win CA they are posted below
    First error :
    Event Type:
    Error
    Event Source:
    SCEP Add-on
    Event Category:
    None
    Event ID:
    11
    Date:
    13/03/2012
    Time:
    5:05:31 PM
    User:
    N/A
    Computer:
    xyz
    Description:
    HTTP message from the client contains invalid operation tag.  Please find support information at http://xyz/certsrv/mscep/mscephlp.htm.
    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
    Second Error
    Event Type:
    Error
    Event Source:
    SCEP Add-on
    Event Category:
    None
    Event ID:
    18
    Date:
    14/03/2012
    Time:
    9:44:22 AM
    User:
    N/A
    Computer:
    xyz
    Description:
    SCEP Add-on cannot decrypt the inner content of the client's PKCS7 message (0x80090005).  Bad Data.
      Please find support information at http://xyz/certsrv/mscep/mscephlp.htm.
    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
    Then If I see under CA pending request then I can see one pending request which I grant it but no luck after that same error msg pops up all time.
    Maulik

    connect it to your computer that is running itunes and you sync and back up your ipad to

  • Can't install X1 and being billed for returned equipment..

    Moved to customer service for best visibility.

    404 means that those files are no longer available on the mirrors in your mirror list. You probably need to update your system (and should continue to do so at least once a week).
    The protocol errors are due to the inclusion of rsync mirrors in your mirror list. Either remove them or configure the XferCommand in pacman.conf to something that handles rsync along with http. I am not aware of any tools that handle both, so I would just remove the rsync mirrors.

  • REPORT WITH SALES AND PRODUCTIN INTEGRATION?

    HI,
       HERE I NEED TO DISPLAY THE SALES AND PRODUCTION INTEGRATED (FOR MAKE TO STOCK) LIST BY DAY WISE ,I AM NOT ABLE TO FIND THE TABLES FOR THAT.
    HERE LIST HEADER IS FOLOWING.
    MATERIAL CODE, MATERIAL DISCRIPTION, PRODUCTION QTY, PROD. VALUE, SALES(BILLING QTY, SALES(BILLING) VALUE.
    AND THAT LIST TOTAL PRODUCTION VALUE SHOULD EQUAL TO THAT PARTICULAR DAY TOTAL PRODUCTION VALUE,
    AND THAT LIST TOTAL SALES(BLIING) VALUE SHOULD EQUAL TO THAT PARTICULSR DAY TOTAL SALES(BILLING) VALUE.
    PLZ HELP OUT FROM THIS,
    REWARDS IN ADVANCE....
    REGARDS,
    NAVEEN

    Have you tried the txn code MC-Q or the report program RMCV0500.

  • Service order and Logistics Integration

    How to do service order and logistic integration for availability check and reservation of material

    hi
    are you talking about ERP CS service order or CRM service order?

  • FERT -  PRT -  EQUIPMENT   FOR TOOL MAINTENANCE USING PM CONCEPT.

    Hello,
    I need to convert the finished product (produced in our toolroom) to PRT and maintain them as equipment. By this the maintenance cost can be easily captured for these equipment PRT.
    It will be helpful if anyone can guide me for step by step prcedure.

    Hey Maheshwaran,
    Thanks for your reply, but I found my answer. I wanted to get exact equipment number that is used as PRT in order which I  found as below:
    From Table VIAUFKST with respect to a particular AUFNR i got AUFPL which i used in table AFFH and got OBJID which further I used in table CRVE_B and got EQUNR that is the exact equipment number I wanted in my report.
    Thanks once again.

  • UCCX 7.0.1SR5 to 8.0 upgrade while also adding LDAP integration for CUCM - what happens to agents and Historical Reporting data?

    Current State:
    •    I have a customer running CUCM 6.1 and UCCX 7.01SR5.  Currently their CUCM is *NOT* LDAP integrated and using local accounts only.  UCCX is AXL integrated to CUCM as usual and is pulling users from CUCM and using CUCM for login validation for CAD.
    •    The local user accounts in CUCM currently match the naming format in active directory (John Smith in CUCM is jsmith and John Smith is jsmith in AD)
    Goal:
    •    Upgrade software versions and migrate to new hardware for UCCX
    •    LDAP integrate the CUCM users
    Desired Future State and Proposed Upgrade Method
    Using the UCCX Pre Upgrade Tool (PUT), backup the current UCCX 7.01 server. 
    Then during a weekend maintenance window……
    •    Upgrade the CUCM cluster from 6.1 to 8.0 in 2 step process
    •    Integrate the CUCM cluster to corporate active directory (LDAP) - sync the same users that were present before, associate with physical phones, select the same ACD/UCCX line under the users settings as before
    •    Then build UCCX 8.0 server on new hardware and stop at the initial setup stage
    •    Restore the data from the UCCX PUT tool
    •    Continue setup per documentation
    At this point does UCCX see these agents as the same as they were before?
    Is the historical reporting data the same with regards to agent John Smith (local CUCM user) from last week and agent John Smith (LDAP imported CUCM user) from this week ?
    I have the feeling that UCCX will see the agents as different almost as if there is a unique identifier that's used in addition to the simple user name.
    We can simplify this question along these lines
    Starting at the beginning with CUCM 6.1 (local users) and UCCX 7.01.  Let's say the customer decided to LDAP integrate the CUCM users and not upgrade any software. 
    If I follow the same steps with re-associating the users to devices and selecting the ACD/UCCX extension, what happens? 
    I would guess that UCCX would see all the users it knew about get deleted (making them inactive agents) and the see a whole group of new agents get created.
    What would historical reporting show in this case?  A set of old agents and a set of new agents treated differently?
    Has anyone run into this before?
    Is my goal possible while keeping the agent configuration and HR data as it was before?

    I was doing some more research looking at the DB schema for UCCX 8.
    Looking at the Resource table in UCCX, it looks like there is primary key that represents each user.
    My question, is this key replicated from CUCM or created locally when the user is imported into UCCX?
    How does UCCX determine if user account jsmith in CUCM, when it’s a local account, is different than user account jsmith in CUCM that is LDAP imported?
    Would it be possible (with TAC's help most likely) to edit this field back to the previous values so that AQM and historical reporting would think the user accounts are the same?
    Database table name: Resource
    The Unified CCX system creates a new record in the Resource table when the Unified CCX system retrieves agent information from the Unified CM.
    A Resource record contains information about the resource (agent). One such record exists for each active and inactive resource. When a resource is deleted, the old record is flagged as inactive; when a resource is updated, a new record is created and the old one is flagged as inactive.

  • Data integrator for HP-UX missing data quality and data profiling

    Hi All,
    I have installed ODI 10.1.3.40.0 from odi_unix_generic_10.1.3.4.0.zip in HP unix 11.23.
    Data quality and data profiling is missing in that zip ? Could anyone please help me how to get installer of data quality and data profiling for Oracle data integrator in HP UX 11.23.
    Any response will be highly appreciated.
    Thanks in advance.
    regards
    Umapada
    Edited by: user10612738 on Nov 28, 2008 1:54 AM

    The integrated packaged( ODi, data quality and data profiling) for HP-UX wount available till 10.1.3.5.0 which will be released by this year end.

  • Apple should do something for the equipment stolen something like block and only activated by key words given to register the device on the apple's website

    Apple should do something for the equipment stolen something like block it(them) and only activated by key words given to register the device on the apple's website

    Tell Apple:
    http://www.apple.com/feedback
    Doubtful that this would happen.  Privacy laws would likely be tested with this.
    No manufacturer does this.

Maybe you are looking for