Fetching data for multiple POs one by one using BAPI..

Hi,
We have created a custom BAPI which gives all the details regading a
given PO in multiple tables.
Now in a report I have to give a range of PO numbers which should be passed to BAPI one by one and then the data that will is fetched in BAPI tables should be transferred to flat file one by one for each PO.
How can I do this ?
Thanks.
Regards,
Rajesh.

Hi,
1.Get all the PO Numbers into an internal Table.
2.Loop at the Internal Table.
3.Within the Loop,call the BAPI
4.Pass the Value into an Internal Table got thru BAPi
5.Call the Function Module GUI_DOWNLOAD and Pass the internal Table to that fiunctiona module.
Reward Points if it is helpful.
Regards,
Sangeetha.A

Similar Messages

How do I change the start/stop time for multiple songs not just one song at a time?

How do I chnage the start/stop time for multiple songs not just one song at a time?

I don't think you can in iTunes.
Multiple editing in Get Info does not offer an option to change start/stop times.

Single ERS Invoice for multiple POs with different GS and same IP

Dear All,
I have a Requirement as per the below scenario:
We need to have single invoice created using ERS (MRRL) functionality in the below scenario:
Two POs created with different Partner function GS (goods supplier) and same IP (Invoice party partner function).
Ex:
GS IP PO GR ERS
vendor1 10001 4500001 500001 Yes ( GR-IV-Yes, GR done- Yes, same payment terms - 001)
vendor2 10001 4500002 500002 Yes ( GR-IV-Yes, GR done- Yes, same payment terms - 001)
When I run ERS for last 1 week (GR) and select the option (Doc selection – per IP or other criteria like GRs posted in last one week) , system should create 1 invoice document. Standard SAP posts 2 documents for each GS.
I have tried using 2 user exits for MRRL, but none of them work for this functionality.
Thanks,

Hi,
Go for MIRO without MRRL.
Instead ERS, you can post single Invoice(MIRO) for multiple POs for one vendor.
OR
Check with Technical consultant and go for development to have single ERS output for multiple ERS invoice documents for single vendor.
Regards,
Biju K

Error: can't fetch data for this host - too few bytes supplied by RPC

Hi,
In our internal Lab we have:
One Admin, Media,Client Server (we can make backups for himself) - Solaris 10 with DDS4 tape drive (lab)
One Windows Client (we can make backups) - Windows XP
One Linux Client - CentOS 5.1
When we add the linux client with the command:
mkhost -a ob --inservice -r client -k 1024 linux
We receive this message in the linux (host) /usr/tmp/observiced.log
Error: can't fetch data for this host - too few bytes supplied by RPC partner (OB cached object manager)
And in the obtool we receive (forever looping)
Info: waiting for host to update certification status...
Can you help us with this linux client error ? (iptables and selinux disabled!!)
Thanks in Advance
Serpins

[SOLVED]
Selinux not well removed....
Thanks in Advance
Serpins

Filters on non-conforming dimensions when fetching data from multiple facts

Hi,
I would like to confirm my understanding about how OBI fetches data from multiple facts. I have set up the BMM layer. Through Answers I am getting data from multiple facts as expected. However, is it necessary to base filters only on the conforming dimensions? If I do so, I am getting the correct data. But if I filter data on non-conforming dimensions, then I am getting more data which I am not expecting.
Suppose, Fact1, Fact2 and Fact3 share a CommonDim dimension. If I have a filter on CommonDim, then the filter is used on the three fact tables. However, if I filter data based on Fact1's DimTwo which is not shared by Fact2 and Fact3 and I have measurements from all the fact tables, then from the SQL generated, it seems that OBI is fecting all data from Fact2 and Fact3 and data from Fact1 where DimTwo = 'SomeValue'. Then it seems to be merging the data from the three result sets.
Is this expected, esp. a scenario where a filter is based on a non-conforming dimension (DimTwo in the example)? Have I missed anything? What do I need to do, if I want to return rows from Fact1 based on DimTwo's filter and then if there is data on Fact2 and Fact3 based on the value in CommonDim corresponding to DimTwo's filter?
Please let me know.
Thanks and regards,
Manoj.
PS.: I have got a link now which is http://obibb.wordpress.com/2010/06/06/multiple-fact-reporting-on-non-conforming-dimensions-part-ii/
Edited by: mandix on 25-Oct-2011 12:01

Hi
The problem you describe is similar to mine (I wrote several threads ago).
That is, if there is a non-conformed dimension in a report then the column from the fact table which is not connected with those non-conformed dimensions containes zeros or blanks.
Was this problem solved? I didn't quite catch one of previuos messages... If you can please repeat it more detailed.
What I tried to do is to set Total level in the Content tab (LTS properties). In this example - I could set Total level to JOBS in the plan type dimension. But it didn't help.
So if you know what to do then please describe it here...

MIGO for Multiple POs

Hi Guru's
I need to do migo for multiple POs ( i.e more than 8 PO's)
POs having same material from same vendor differ by QTy.
Is there is any Tcode to achieve this.
Thanks in advance.
regards
Anand

Dear Anand,
In MIGO transaction, Enter the PO's one by one. Once you enter a PO, the line items would get copied and the PO field would become blank. This way, we can enter multiple PO's belonging to a single vendor
for more detail please check this link.
Re: GR for multiple PO
regards,
PRavin Kadam

How to fetch data for sales order costing

Hi All,
How to fetch data for VA03 --> Extras --> Costing having cost element details.
Thanks
Gaurav

Hi Gaurao ,
There is no such function module to extract data in one column , you have to Convert all the columns data in one column
for period .
regards
Deepak.

When I add a while loop to the vi "niScope EX Multi-Device Configured Acquisition (TClk)" to acquire data for multiple times, it works but it runs very slowly.

Because I want to acquire the similar data for multiple times and then take an average to increase SNR, I add a while loop to the vi "niScope EX Multi-Device Configured Acquisition (TClk)". It works but it runs very slowly (about 1 sec for each iteration). I think I had put the while loop at a wrong position, which makes the vi run from the very beginning in each iteration. So I really want to know where should I put the while loop to improve the speed? I have attached all the vi and subvi.
Thanks very much.
Attachments:
Multi-Device External Clocking (TClk).vi ‏1166 KB
avgWfm.vi ‏15 KB

Dear Zainykhas,
Thank you for posting this to the discussion forums and for uploading some sample code. I took a lok at the issue you have been having, and it is unclear to me as to why you have placed two for loops around the original while loop. My understanding is that you want to use the original Sample.vi and want to execute this N times where N is the Max Freq divided by Interval so that you can scan for a range of frequencies.
Why not just put Sample.vi around one for loop and use the increment counter scaled by the interval to count up towards Max Freq and insert the desired Frequency into the cluster using Bundle By Name?
Kind Regards,
Robert Ward
Applications Engineer, NI
Attachments:
Modified - RW.vi ‏48 KB

Generic datasource by function module to fetch data from multiple tables?

I'm writing a function module to fetch price, for generic datasource.
At first, extract test is OK. But InfoPackage never stop when loading data to PSA in BW.
And I find the example codes:
     OPEN CURSOR WITH HOLD S_CURSOR FOR
      SELECT (S_S_IF-T_FIELDS) FROM SFLIGHT
                               WHERE CARRID IN L_R_CARRID AND
                                     CONNID IN L_R_CONNID.
    ENDIF.                             "First data package ?
* Fetch records into interface table.
*   named E_T_'Name of extract structure'.
    FETCH NEXT CURSOR S_CURSOR
               APPENDING CORRESPONDING FIELDS
               OF TABLE E_T_DATA
               PACKAGE SIZE S_S_IF-MAXSIZE.
    IF SY-SUBRC <> 0.
      CLOSE CURSOR S_CURSOR.
      RAISE NO_MORE_DATA.
    ENDIF.
    S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
ENDIF.
There using Cursor to fetch data package by package, and raise exception NO_MORE_DATA to stop the loading process.
Now I fetch data from multiple tables, I don't think I can use Cursor.
Then How can I handle this?
Thanks a lot.

Thanks
IF IT_999[] IS INITIAL.
    SELECT A~KNUMH A~MATNR A~KSCHL VKORG VTWEG A~DATBI A~DATAB KBETR KMEIN KPEIN C~MTART APPENDING CORRESPONDING FIELDS OF
      TABLE TP_DATA
        FROM A999 AS A
          INNER JOIN KONP AS B
              ON A~KNUMH = B~KNUMH
          INNER JOIN MARA AS C
             ON A~MATNR = C~MATNR
*          FOR ALL ENTRIES IN IT_999
                WHERE
*      A~KNUMH = IT_999-KNUMH AND
       ( ( A~KSCHL = 'ZPRC' AND VKORG = 'Z000' AND VTWEG = 'Z1' ) OR
                      ( A~KSCHL = 'ZPRD' AND VKORG = 'A000' AND VTWEG = 'Y3' ) ) AND
*                      A~DATBI >= SY-DATUM AND
                      LOEVM_KO = ''.
    SELECT A~KNUMH A~MATNR A~KSCHL VKORG VTWEG A~DATBI A~DATAB KBETR AS KHETR KMEIN KPEIN C~MTART APPENDING CORRESPONDING FIELDS OF
      TABLE TP_DATA
        FROM A999 AS A
          INNER JOIN KONP AS B
              ON A~KNUMH = B~KNUMH
          INNER JOIN MARA AS C
             ON A~MATNR = C~MATNR
*          FOR ALL ENTRIES IN IT_999
                WHERE
*      A~KNUMH = IT_999-KNUMH AND
      A~KSCHL = 'ZPR3' AND A~VKORG = 'I000' AND
*                      DATBI >= SY-DATUM AND
                      LOEVM_KO = ''.
ENDIF.
IF IT_997[] IS INITIAL.
    SELECT A~KNUMH A~MATNR A~KSCHL VTWEG A~DATBI A~DATAB KBETR AS KHETR KMEIN KPEIN C~MTART APPENDING CORRESPONDING FIELDS OF
      TABLE TP_DATA
        FROM A997 AS A
          INNER JOIN KONP AS B
              ON A~KNUMH = B~KNUMH
          INNER JOIN MARA AS C
             ON A~MATNR = C~MATNR
*          FOR ALL ENTRIES IN IT_997
                WHERE
*      A~KNUMH = IT_997-KNUMH      AND
      A~KSCHL = 'ZPRA' AND VTWEG = 'Y1' AND
*                      DATBI >= SY-DATUM AND
                  LOEVM_KO = ''.
ENDIF.
IF IT_996[] IS INITIAL.
    SELECT A~KNUMH A~MATNR A~KSCHL A~DATBI A~DATAB KBETR AS KHETR KMEIN KPEIN C~MTART APPENDING CORRESPONDING FIELDS OF
       TABLE TP_DATA
         FROM A996 AS A
           INNER JOIN KONP AS B
               ON A~KNUMH = B~KNUMH
           INNER JOIN MARA AS C
              ON A~MATNR = C~MATNR
*          FOR ALL ENTRIES IN IT_996
                WHERE
*      A~KNUMH = IT_996-KNUMH AND
      A~KSCHL = 'ZPRB' AND
*                       DATBI >= SY-DATUM AND
      LOEVM_KO = ''.
ENDIF.
SELECT   MATNR     "u7269u6599u53F7u7801
           MEINH     "u4ED3u50A8u5355u4F4Du7684u5907u7528u8BA1u91CFu5355u4F4D
           UMREZ     "u57FAu672Cu8BA1u91CFu5355u4F4Du8F6Cu6362u5206u5B50
           UMREN     "u8F6Cu6362u4E3Au57FAu672Cu8BA1u91CFu5355u4F4Du7684u5206u6BCD
      FROM MARM
      INTO CORRESPONDING FIELDS OF TABLE IT_MARM
       FOR ALL ENTRIES IN TP_DATA
     WHERE MATNR = TP_DATA-MATNR AND MEINH = TP_DATA-KMEIN.
LOOP AT TP_DATA.
    IF TP_DATA-KPEIN NE 0.
      TP_DATA-KBETR = TP_DATA-KBETR / TP_DATA-KPEIN.
      TP_DATA-KHETR = TP_DATA-KHETR / TP_DATA-KPEIN.
    ENDIF.
    IF TP_DATA-KSCHL = 'ZPRA'.
*       TP_DATA-MEINH = 'ZI'.
*      TP_DATA-KSCHL = 'B4'.
      IF TP_DATA-KMEIN = 'ZI'.
        TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
      ELSE.
        READ TABLE IT_MARM INTO WA_MARM1 WITH KEY MATNR = TP_DATA-MATNR MEINH = TP_DATA-KMEIN.
*           READ TABLE IT_MARM INTO WA_MARM2 WITH KEY MATNR = TP_DATA-MATNR MEINH = 'CT'.
        TP_DATA-KHETR = TP_DATA-KHETR * WA_MARM1-UMREN / WA_MARM1-UMREZ.
*           * WA_MARM2-UMREZ / WA_MARM2-UMREN.
        TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
      ENDIF.
    ELSEIF TP_DATA-KSCHL = 'ZPRB'.
*      TP_DATA-KSCHL = 'L0'.
*       TP_DATA-MEINH = 'ZI'.
      IF TP_DATA-KMEIN = 'ZI'.
        TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
      ELSE.
        READ TABLE IT_MARM INTO WA_MARM1 WITH KEY MATNR = TP_DATA-MATNR MEINH = TP_DATA-KMEIN.
*           READ TABLE IT_MARM INTO WA_MARM2 WITH KEY MATNR = TP_DATA-MATNR MEINH = 'BAG'.
        TP_DATA-KHETR = TP_DATA-KHETR * WA_MARM1-UMREN / WA_MARM1-UMREZ.
*           * WA_MARM2-UMREZ / WA_MARM2-UMREN.
        TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
      ENDIF.
    ELSEIF TP_DATA-KSCHL = 'ZPRC' OR TP_DATA-KSCHL = 'ZPRD'.
*       TP_DATA-MEINH = 'ZI'.
      IF TP_DATA-KMEIN = 'ZI'.
        TP_DATA-KHETR = TP_DATA-KBETR * '1.17'.
      ELSE.
        READ TABLE IT_MARM INTO WA_MARM1 WITH KEY MATNR = TP_DATA-MATNR MEINH = TP_DATA-KMEIN.
*           READ TABLE IT_MARM INTO WA_MARM2 WITH KEY MATNR = TP_DATA-MATNR MEINH = 'WZI'.
        TP_DATA-KBETR = TP_DATA-KBETR * WA_MARM1-UMREN / WA_MARM1-UMREZ.
*           * WA_MARM2-UMREZ / WA_MARM2-UMREN.
        TP_DATA-KHETR = TP_DATA-KBETR * '1.17'.
      ENDIF.
    ELSEIF TP_DATA-KSCHL = 'ZPR3'.
*      TP_DATA-KSCHL = 'B2'.
      IF TP_DATA-KMEIN = 'ZI'.
        TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
      ELSE.
        READ TABLE IT_MARM INTO WA_MARM1 WITH KEY MATNR = TP_DATA-MATNR MEINH = TP_DATA-KMEIN.
*           READ TABLE IT_MARM INTO WA_MARM2 WITH KEY MATNR = TP_DATA-MATNR MEINH = 'BAG'.
        TP_DATA-KHETR = TP_DATA-KHETR * WA_MARM1-UMREN / WA_MARM1-UMREZ.
*           * WA_MARM2-UMREZ / WA_MARM2-UMREN.
        TP_DATA-KBETR = TP_DATA-KHETR / '1.17'.
      ENDIF.
    ENDIF.
    TP_DATA-MEINH = '01'.
    MODIFY TP_DATA.
E_T_DATA-MATNR =   TP_DATA-MATNR.
E_T_DATA-KSCHL =   TP_DATA-KSCHL.
E_T_DATA-KHETR =   TP_DATA-KHETR.
E_T_DATA-KBETR =   TP_DATA-KBETR.
E_T_DATA-KMEIN =   TP_DATA-KMEIN.
E_T_DATA-DATAB =   TP_DATA-DATAB.
E_T_DATA-DATBI =   TP_DATA-DATBI.
APPEND E_T_DATA.
    CLEAR WA_MARM1.
    CLEAR WA_MARM2.
ENDLOOP.
Edited by: Shen Peng on Oct 20, 2010 10:09 AM

How to fetch data for a struture from a cluster table

How can I fetch data for a struture, from a cluster table, based on the name of the structure?

Hi,
In order to read from Cluster DB Table use the following statement:
Syntax
IMPORT <f1> [ TO < g1 > ] <f2> [TO < g2 >] ...
FROM DATABASE <dbtab>(<ar>)
[CLIENT <cli>] ID <key>|MAJOR-ID <maid> [MINOR-ID <miid>].
This statement reads the data objects specified in the list from a cluster in the database <dbtab>.
You must declare <dbtab> using a TABLES statement. If you do not use the TO <gi> option, the
data object <fi> in the database is assigned to the data object in the program with the same
name. If you do use the option, the data object <fi> is read from the database into the field <gi>.
For <ar>, enter the two-character area ID for the cluster in the database. The name <key>
identifies the data in the database. Its maximum length depends on the length of the name field
in <dbtab>.
The CLIENT <cli> option allows you to disable the automatic client handling of a client-specific cluster database, and specify the client yourself. The addition must always come directly after the name of the database.
For Eg:
PROGRAM SAPMZTS3.
TABLES INDX.
DATA: BEGIN OF JTAB OCCURS 100,
COL1 TYPE I,
COL2 TYPE I,
END OF JTAB.
IMPORT ITAB TO JTAB FROM DATABASE INDX(HK) ID 'Table'.
WRITE: / 'AEDAT:', INDX-AEDAT,
/ 'USERA:', INDX-USERA,
/ 'PGMID:', INDX-PGMID.
SKIP.
WRITE 'JTAB:'.
LOOP AT JTAB FROM 1 TO 5.
WRITE: / JTAB-COL1, JTAB-COL2.
ENDLOOP.
Regards,
Neha
Edited by: Neha Shukla on Mar 12, 2009 1:35 PM

Vendor invoie for multiple POs with different payment terms

Hi,
We have a vendor which send a single invoice for multiple POs which have different payment terms. Now if we create a single invoice in MIRO, then only a payment term can be applied.
However user want to pay to the vendor corresponding to the PO terms.
Please let us know any way apart from creating multiple MIRO documents.
Regds,
Nand

Hi,
You can achieve so in standard SAP.
Go to OBY6 and activate the check box "Enable Amount Split" in your company code. Then in MIRO, a new tab will appear in the header as "Amount Split"
In this tab, you can split the vendor invoice in multiple lines with respective payment method and payment term.
I hope this will help you.
Regards,
Gaurav

I want to acquire data for multiple channels using PCI 6120 that works on traditional DAQ. I cannot access more than one channel, can someone help me or if someone has data acquisition vi for PCI 6120, please send me over . Thanks

I have PCI 6120 card and I want to acquire data for more than one channels. I'm using traditional DAQ to get it. But it does not work for more than one channels. If someone has a data acquisition vi for PCI 6120. Or some suggestion how to aquire data please let me know.
Thanks

Hello DSPGUY1,
You can definetly acquire from several channels. For your convenience, I have appended below the content from help that tells you how to configure it:
"channels specifies the set of analog input channels. The order of the channels in the scan list defines the order in which the channels are scanned during an acquisition. channels is an array of strings. You can use one channel entry per element or specify the entire scan list in a single element, or use any combination of these two methods. If x, y, and z refer to channels, you can specify a list of channels in a single element by separating the individual channels by commas, for example, x,y,z. If x refers to the first channel in a consecutive channel range and y refers to the last channel, yo
u can specify the range by separating the first and last channels by a colon, for example, x:y."
Hope this help.
Serges Lemo
Applications Engineer
National Instruments

How to submit InfoPath form data to multiple SharePoint lists at one time?

Hi,
I'm looking for a way to submit certain data in InfoPath form to separate SharePoint lists at the same time. I have a form that has two views with many data in them. I want to keep these data in separate SharePoint list besides keeping them in the XML. I know that you can submit to a form library using SharePoint document library data connection, but I'm not sure if you can use several data connections for submitting data to multiple SharePoint lists. Is it only possible to do using code? If yes, can anyone show a sample. I have never coded in InfoPath, though I used C# a lot in .Net.
Thank you!Regards,
R.D.M.

This is an old thread but I tripped over a codeless method to do this with OOB InfoPath 2010 and SP 2010.
Assuming your main InfoPath form is published to a document library with the promoted fields that you want to see.
Publish your form to a new document library to capture the secondary data fields that you want separated out.
Using the Publishing Wizard do the following:
Go to – File then Publish
Select SharePoint Server “ Publish form to a SharePoint Library”
Enter location of your SharePoint or InfoPath Forms Services Site:
accept the default in this field from the first published event
Next screen, keep the default or change it, Form Library, Site Content Type or Admin Approved
Next screen, What do you want to do?
Create a new form library
Add new document library name and description
Next screen, Remove all promoted fields not applicable to the new library and add all of the ones you want to see data for.
Click Next and Publish
Come back into the form: If you don’t have buttons added directly to the form to submit or update, add them.
Create a new Action rule on the button
Label the rule to keep it straight
Condition, occurs when button clicked
Add action, Submit data
Use data connection to the second library created
Create a second new Action rule on the same button
Label the rule to keep it straight
Condition, occurs when button clicked
Add action, Submit data
Use original data connection to the library
Then you can add another action to close the form or do whatever you need.
Republish the form to both libraries to set the template for both.
File – Publish – SharePoint Server
Select Secondary library from drop down follow the rest of the prompts
Follow step 5a again, select Primary library from drop down, Add back in all of the promoted fields needed for the primary library and follow the prompts.
DOCUMENT YOUR FORM WELL FOR MAINTENANCE
Special considerations, your primary library needs a unique ID to reference in your secondary library.
Your secondary library will need a unique ID that is not related to the primary if you are going to store multiple records for a single primary library reference.
Example: One form, multiple updates.

BADI for multiple address check at one time for a BP

Hi All,
I am on CRM7.0
I have a BPHEADOverview Screen on which a view is assigned with Address Details for that particular BP.
Once i go in to the Address view corresponding to that BP on UI and do some address changes, i am able to capture the changes in the BADI BUPA_ADDR_CHECK while i click on event BACK on the address screen.
But my requirement is that BADI should be triggered once i click the event SAVE on BPHEADOverview Screen.
Could you please let me know the name of the BADI that can give me all BP addresses, related data for the above mentioned scenario..
I need a BADI which captures all changed address detail for a particula BP at the time of clicking event SAVE on BPHEADOverview Sceen.
Best Regards,
Saurabh

Welcome to the Apple Community.
Not if it's no longer active, you can check this at...
My Apple ID

Tolerance Limits: Multiple Invoices for single POs, Single Invoices for Multiple POs

Hi,
I'm currently looking at tolerance limit configurations, primarily the DQ (Quantity) and PP (Price) tolerance keys and had a couple of questions where you have the scenario of multiple invoices or multiple POs.
1. If I had multiple invoices for a single PO, collectively they match the quantity and price on the PO; When I enter the first invoice into SAP it will be well below the lower price and quantity limit of the PO as it is one of multiple invoices to be entered. My question is what happens to the invoices in SAP, do you still post them despite the error message and they are just blocked until collectively the invoices match the quantity/price of the PO?
2. If I had an invoice that related to multiple POs, when entering the invoice can I link this to multiple POs?

You don't use user exits or enhancements for this. Use a data transfer routine and assign it to your item level copy control config. Spilt keys are controlled by setting the value of VBRK-ZUKRI. Otherwise, you can use multiple payers or addresses to control it.

Fetching data for multiple POs one by one using BAPI..

Similar Messages

Maybe you are looking for