Fixed values of dynamic attributes are not displayed for bid response

Hi
I have created a bid with dynamic attributes and have weighted the options with fixed values. I publish the Rfx (bid) and all is ok. The problem is that the fixed values are not displaying when doing a bid response.
We are using SRM 7.0
Can anyone help?

No. Not yet. I think it is a bug. You should create an OSS message to SAP and ask them to pay special attention to the following code block:
Class: /SAPSRM/CL_CH_WD_DODM_DYNATTR
Method: /SAPSRM/IF_CLL_MAPPER~REFRESH
At the end of the method, look for code context:
IF lv_object_type = c_qte.
*Set the Fixed Values Table to Invisible
    lv_visible = abap_false.

Similar Messages

  • Attributes are not displaying in Navigational Attributes area of DSO.

    Hi Experts,
    I have created a DSO and have included Info Objects 0SOLD_TO & 0SHIP_TO. In the Navigational Attributes area, its attributes are not getting displayed even though the attributes are in the info object.
    What are the steps needed to perform for it to display there?
    Waiting for your reply,
    Thanks in advance,
    With Kind Regards,
    Shreeem

    Hi Shreem,
    If you want attributes of any master objects in navigational attributes section, you have make them navigational attributes while defining base info object.
    Please follow the below steps.
    1) goto RSA1, search for 0SOLD_TO & 0SHIP_TO info objects and open them
    2) goto edit mode of info object and goto attributes section.
    3) here you will find for every object "DIS" --- this means these attributes are display attributes.
    4) If you want to change any attribute to NAV, then click on "Pencil Mark".
    5) Now you can see text NAV instead of DIS for that attribute.
    activate the info object and goto DSO, now you will see that attribute in navigational attribute folder.
    Regards,
    Venkatesh

  • Buttons are not displayed for the first time when drawImage method is used

    Hi
    In my swing window 2 buttons are there and when clicking these buttons, it should display an image . The two buttons are displayed at the first time and I can click on it . While clicking a button , the corresponding image is also got displayed. [ I am using drawImage() function for it] But what the problem is, then the two buttons are not displayed and it will be displayed again when the mouse moves along the position of these two buttons. And this problem occurs only at the first time..When they are on the window on a second time, they won't vanish when the image is displayed when clicking it. Is this the problem with paint() method?. I am using start() method also.
    Please help me!
    Thank You

    Hi
    This is not my exact program, that has a large no: of code. So I am putting here a sample one. One thing I would like to point out is that , I can see the buttons at the time of loading the applet and suddenly it vanishes and the image is drawn. Then if I move the mouse along the position of these buttons , they got displayed.
    import java.awt.*;
    import javax.swing.*;
    /*<applet code = MyClass width = 500 height = 500>
    </applet>
    public class MyClass extends JApplet
    Image img;
    JButton b1,b2;
    Container cp;
    Canvas1 cv;
    class Canvas1 extends JPanel
    public void paint(Graphics g)
    super.paint(g);
    g.setColor(Color.black);
    g.fillRect(0,0,500,500);
    img = getImage(getCodeBase(),"image1.jpeg");
    g.drawImage(img,20,20,this);
    public void start()
    cv = new Canvas1();
    cv.setBounds(0,0,500,500);
    cp.add(cv);
    public void init()
    setLayout(null);
    cp = getContentPane();
    b1 = new JButton("Button1");
    b1.setBounds(1,1,100,30);
    cp.add(b1);
    b2 = new JButton("Button2");
    b2.setBounds(200,1,100,30);
    cp.add(b2);
    It would be very helpful to me if you could fix the problem.
    Thank You.

  • The fixed value date is empty and not displayed in the VA05 report

    Hi SD Gurus,
    With in the Sales Order in the line item level in the billing tab we have the fixed value date (VBKD - VALDT) were entered. 
    But when we try to execute the report VA05 were the fixed value date column shows empty (i.e without the date it shows the blank).  Can you any one help me with regard.
    We would like to fix this problem.
    Thanks in advance for providing solution to this query.
    Thanks and Regards,
    SAP-SD group

    Hi janarthanam,
    Ok.
    Goto t-code SQVI,SAP Quickviewer.
    Give a name to your query and enter description ,etc.
    Next enter the table from which you want to fetch data,ie,VBKD .
    Select "Layout mode" for displaying data on the SAP screen or "Basis mode " if you want to extract the data to a word doc,excelsheet or a flat file.
    Next you can select the fields you want to display into your report,their position and ascending/descending order,Here make sure u select
    the field u need to display ie. the fixed value date ( VALDT) .
    also select the fields u wish to have in the selection criteria.
    Enter these required information and u would get a report on the SAP screen or in your desired format.
    Hope it will suffice you.
    For any queries ,your are welcomed.
    Thanks,
    Umesh.

  • Special characters in SBWP dynamic columns are not showing for some users

    Hi experts,
    We have set up a dynamic columns for business workplace. One of the field displays the comments entered by the user. Some users are able to see the values entered perfectly. But for some users, if we enter special characters like @gopal, it is not displaying the value in dynamic column.
    Are there any workflow/user settings need to be changed.
    Thanks
    Gopal

    I had the same issue, you should check the link between AD and CRM, so you could make a new user in AD and connect your CRM account with it, then you should return the old AD account back. It worked for me, try it :)

  • User attributes are not available for not root organizations

    Hello,
    my scenario: I have following organizations in IDM: Top; Top:Economy; etc...
    I created Admin role "Economy director" with this settings:
    Controlled Organizations - "Top:Economy"
    Capabilities - "Account Administrator" and "Waveset administrator"
    Now I assign this role to user A. This user A is in organization "Top:Economy" and he tried to edit user B in "Top:Economy". When I log in as user A I see in admin interface "Accounts->List Accounts" only Economy organization. In this organization I click on user B and select tab "Attributes". But here is no global attributes to change.
    When I change "Economy director" role - Controlled Organizations to "Top" then user A can change global attributes of user B. But now user A can change everybody attributes in whole organization tree.
    It's correct? I need to set user A to change attributes only for users in organization "Top:Economy".
    Thanks for advice.
    Petr

    This sounds like a question for forum: Sun Java System Identity Manager
    But anyways... the "Attributes" tab is a collection of all the unreferenced attributes of all the resources assigned, it has some special behaviors.
    You should have been able to change fname, lname, email of User B as User A (UserA is assigned AdminRole with Org & Capabilities assigned as described, without Top assigned). If not, something basic is not wired between User A and the AdminRole. Possibly it's the version in use?? But, if attempted against Oracle Waveset 8.1.1, this should be functionally straightforward to get working...
    The Attributes Tab would only have attributes listed if there were roles or resources assigned with attributes the admin was able to see "in-scope". A resource with attributes (e.g. LDAP resource with a groups attribute) must be scoped for the administrators in the AdminRole to see/manage them per assigned capabilities.
    In the example, a resource with attribute "country" scoped into Top:Economy would allow UserA to edit UserB, update the "Attributes" Tab "country" attribute.
    Edited by: gregoatwaveset on Oct 13, 2010 8:09 PM

  • Attributes are not displaying

    Hi,
        I m unable to see the attributes of an object (ZER34) and after creating the an attribute when I delete it in attribute list it still appearing in the tree of that (ZER34) info object

    Hi
    Open your info object and goto attributes tab
    select the attribute and goto delete button at bottom to delete.
    It should be fine.Otherwise check the authorisations.
    Also make sure that master data is deleted before deleting attributes.
    Regards,
    Chandu.
    Edited by: Chandu on Oct 15, 2008 1:06 PM

  • Text fields are not displayed for custom infotypes in Adhoc query

    We have developed a custom infotype , which we had incldued in the adhoc query.  when we generate output , it is showng codes instead of text . In the output filed , it is hwoing only vaue and Vale and text is diabled.
    please let me know , how to add text in the out filed filed
    thanks
    rajaram B bhat

    HI
    But in the out put filed , when  i click on the output filed , i am get three drop downs , only text , only value and valu & text.
    Only value is enabled and other two ate disabled.
    How to enable the othet two , i.e text only and value & text
    thanks & regards
    Rajaram B Bhat

  • Few values of report column do not display in report while applying filter

    Post Author: anuragg11
    CA Forum: WebIntelligence Reporting
    There are 6 drill filters applied on the report to filter out the report column data. Few values of the report are not displaying in the report when using drill filter. Same issue is with report filter too. If filters are removed then values are appearing in the report. We are using version BO XI R2 & Java runtime JRE 1.4v. It doesn't look issue is with Java version because only few specific data of the report column are not shown in the report when using filter on the data. Example: One of Report data column contains below values: 24.2, 26.9, 120.1, 230, 274.9, 275.8, 333.2 Report is displaying all these values when there is no filter on any data. But report doesn't display data when applying filter on 274.9 or 120.1 howver filter on other values 24.2, 26.9, 230, 275.8, 333.2 are working fine.

    Hello,
    I think i know what your problem is.
    Although in table view your 2 requests combine perfectly and show separate results in pivot view BI unfortunaterly adds them up.
    One work around would be to go in your criteria add in each request a dummy column. This can be obtained the following way:
    1. click on a column to add it in the criteria (it doesnt matter which one)
    2. go into the edit formula of that column
    3. delete the formula and in its place write 'Dummy Column 1'
    Do the same for the second request by adding a "Dummy Column 2'
    Now the Pivot Table should also show up correctly
    Let me know if it goes well or if you have any further questions,
    Kostis

  • Contact Names Not Displaying for My Conversations ...

    Hi Contact Names are Not Displaying for My Conversations in C7.
    I took C7 in April 2011.Suddenly today (July 26th 2011).Names are not displaying and also my mobile became very slow when accessing ..
    Please tell me what to do

    You are welcome. Please resolved the thread?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Oracle Table Values are not displayed when tried to display with Essbase

    Hi,
    I was trying to create a report with Oracle RDB Table and Essbase by following the steps given in "Federating Essbase and Relational Data Sources in Oracle Business Intelligence Suite Enterprise Edition Plus" document at the location http://www.oracle.com/technology/obe/obe_bi/bi_ee_1013/fed_data/fed_data.html.
    I am able to see the members from the Essbase cubes and I can also see the Oracle Table values, if they are displayed individually (i.e. different reports) but when I try to get one report with Essbase values with Oracle table records then Oracle table records are not displayed and when see the query log I don't see the query for Oracle table but I see obviously MDX queries for the essbase.
    Please help.
    Regards,
    Paresh

    Hi,
    Smitha, you can defnetly use dynamic table in interactive form. I had similar problem and I acheived like follwing:Basically you have to bind the table .
    If you want to have fixed number of rows in the interactive form, then in wddoinit method bind the internal table to ur table node. for exmaple: if u want 2 rows in the form loop times . So by default when you open the form you will get two rows for the table.
    **************BIND THE ITAB ****************************
    DO 2 TIMES.
    APPEND LW_LFBK TO LT_LFBK.
    CLEAR LW_LFBK.
    ENDDO.
    CALL METHOD lo_nd_t_lfbk->bind_table
    EXPORTING
    new_items = LT_LFBK.
    If you want to have dynmic table then take a submit button in the form instead of normal button,
    in onaction submit write a loop every time you click that new submit button it should add a new row.
    use above coding in onactionsubmit instead of doinit.
    Thats it.
    Regards,
    Ravi

  • Chart values are not displaying.

    Hi Gurus,
    We are in BI NW2004s SP11. Actually our web templets are publishing in EP.
    For some of the charts are not displaying any values.
    IGS_RFC_DEST version is 7000.0.8.1.
    Can any one give me suggestion to fix the problem.
    Thanks in advance.
    Thanks
    Raju.k

    Hi Arun,
    Some of the charts are in Line and Bar. When i check in IGS test here it is showing bar chart.
    Still i am facing the problem. Is there any NOTE to apply? please suggest me.
    Thanks in advance.
    Thanks
    Raju.k

  • New created values are not displaying after upload

    Hi
    I have created 2 key figures(Infoobject),4 new nodes and leafs(Hierarchy), to include the new logic at R/3 end as well as BW end.Every thing is fine even after doing full upload(repair).
    When i execute the query the data is not populated in its respective infoobjects and hierarchy nodes and leafs.
    Even 1 infoobject which is used for Counter value is not showing the counting as it's defined as aggregate to the info object Count and that included to ODS which is responsible for counting. after full upload it's not showing the counter values.
    After full upload(Repair) all these entries are not displaying in the report against the data which is present at RSA3 level.
    Can any one tell me how to make them available in the query even after data is uploaded / available in the bw.
    Gaurav Upadhyaya
    Edited by: Gaurav on Aug 26, 2008 10:55 AM

    Hi,
    You can´t see hierarchies in an infoprovider, so this is ok. A hierarchie is a part of an infoobject. But you say  you have 2 new kefigures and they are not filled. I suppose you added both keyfigures to your DSO/Cube and to the datasource (in your source system). Have you extended the transformations between datasource <-> DSO and DSO <-> Cube too? Are the keyfigures correctly connected (in the transformations)? If yes, check your PSA after loading. Are the keyfigures filled here? If no, check the RSA3 in your source system. Are the fields for you keyfigures filled there?
    Pls. check this all and tell us, what the result is.
    Regards

  • Service order values posted to WBS, values are not displaying in CJii3

    Hi,
    We have posted thevalues from service order to wbs.
    values are not displaying in cji3.
    Regards,

    Hi,
    If the data has been successfully loaded into BPC, then it should be visible in BPC report.
    You need to make sure that you are looking at the correct data region. Check in RSA1 and check which data region has the data. Maintain the same region in the report as well.
    Hope this helps.

  • Unposted values are not display in input-ready queries - BRAIN 485

    Hi experts,
    After installing the support package level from "7.00 SP16" to "7.00 SP21" we meet an issue in our input-ready queries.
    When we use the setting "Access Type for Result Values" according to master data in a query with time characteristics in columns, the system error BRAIN 485 occurs & no cells are not displayed.
    Any idea ?
    Thanks in advance,
    Laurent

    Hi raj,
    Thanks for your reply.
    Please tell me with which BEx patch you have faced this issue.
    We are on BI7.0 SP 19.
    Thanks.
    Regards,
    Rik

Maybe you are looking for