Ffmpeg installation on Solaris 10 AMD opteron processor

Hi All,
I would like to know whether ffmpeg can be installed on Solaris 10 AMD opteron processor.
-BR

I've had the same problem when trying to install it, in my case the disklabel was created with parted and caused the problems. I've relabeld the disk by booting into single user mode from cdrom and executing these commands:
# dd if=/dev/zero of=/dev/rdsk/c0t0d0s0 bs=1024 count=20
# format
(select the disk ('0') and 'label' it)
(verify the label and quit)
# reboot
(installation questions)
Preparing system for Solaris install
Configuring disk (c0t0d0)
- Creating Solaris disk label (VTOC)
Creating and checking UFS file systems
- Creating / (c0t0d0s0)
- Creating /var (c0t0d0s1)
- Creating /usr (c0t0d0s6)
[...]

Similar Messages

  • Ffmpeg installation in solaris 10

    Hello,
    SunOS MixemSun 5.10 Generic_120012-14 i86pc i386 i86pc
    I am trying to install ffmpeg in solaris 10 but no luck, Not able to install.
    Anybody installed it before?? please help me.
    # make
    make: Fatal error in reader: Makefile, line 5: Unexpected end of line seen
    # gmake
    gmake: *** virtual memory exhausted. Stop.
    CMOV enabled no
    CMOV is fast no
    EBX available yes
    EBP available no
    10 operands supported no
    gprof enabled no
    debug symbols yes
    strip symbols yes
    optimizations yes
    static yes
    shared no
    postprocessing support no
    software scaler enabled no
    new filter support no
    filters using lavformat no
    video hooking yes
    Imlib2 support no
    FreeType support yes
    network support yes
    IPv6 support no
    threading support no
    SDL support no
    Sun medialib support no
    AVISynth enabled no
    libamr-nb support no
    libamr-wb support no
    libdc1394 support no
    libdirac enabled no
    libfaac enabled no
    libfaad enabled no
    libfaad dlopened no
    libgsm enabled no
    libmp3lame enabled no
    libnut enabled no
    libopenjpeg enabled no
    libschroedinger enabled no
    libspeex enabled no
    libtheora enabled no
    libvorbis enabled no
    libx264 enabled no
    libxvid enabled no
    vdpau enabled no
    zlib enabled yes
    bzlib enabled yes
    Enabled decoders:
    aac flashsv pcm_u24be
    aasc flic pcm_u24le
    adpcm_4xm flv pcm_u32be
    adpcm_adx fourxm pcm_u32le
    adpcm_ct fraps pcm_u8
    adpcm_ea gif pcm_zork
    adpcm_ea_maxis_xa h261 pcx
    adpcm_ea_r1 h263 png
    adpcm_ea_r2 h263i ptx
    adpcm_ea_r3 h264 qcelp
    adpcm_ea_xas huffyuv qdm2
    adpcm_g726 idcin qdraw
    adpcm_ima_amv imc qpeg
    adpcm_ima_dk3 indeo2 qtrle
    adpcm_ima_dk4 indeo3 ra_144
    adpcm_ima_ea_eacs interplay_dpcm ra_288
    adpcm_ima_ea_sead interplay_video rawvideo
    adpcm_ima_iss jpegls rl2
    adpcm_ima_qt kmvc roq
    adpcm_ima_smjpeg loco roq_dpcm
    adpcm_ima_wav mace3 rpza
    adpcm_ima_ws mace6 rv10
    adpcm_ms mdec rv20
    adpcm_sbpro_2 mimic rv30
    adpcm_sbpro_3 mjpeg rv40
    adpcm_sbpro_4 mjpegb sgi
    adpcm_swf mlp shorten
    adpcm_thp mmvideo smackaud
    adpcm_xa motionpixels smacker
    adpcm_yamaha mp1 smc
    alac mp2 snow
    amv mp3 sol_dpcm
    ape mp3adu sonic
    asv1 mp3on4 sp5x
    asv2 mpc7 sunrast
    atrac3 mpc8 svq1
    avs mpeg1video svq3
    bethsoftvid mpeg2video targa
    bfi mpeg4 theora
    bmp mpegvideo thp
    c93 msmpeg4v1 tiertexseqvideo
    cavs msmpeg4v2 tiff
    cinepak msmpeg4v3 truemotion1
    cljr msrle truemotion2
    cook msvideo1 truespeech
    cscd mszh tscc
    cyuv nellymoser tta
    dca nuv txd
    dnxhd pcm_alaw ulti
    dsicinaudio pcm_dvd vb
    dsicinvideo pcm_f32be vc1
    dvbsub pcm_f32le vcr1
    dvdsub pcm_f64be vmdaudio
    dvvideo pcm_f64le vmdvideo
    dxa pcm_mulaw vmnc
    eacmv pcm_s16be vorbis
    eatgq pcm_s16le vp3
    eatgv pcm_s16le_planar vp5
    eatqi pcm_s24be vp6
    eightbps pcm_s24daud vp6a
    eightsvx_exp pcm_s24le vp6f
    eightsvx_fib pcm_s32be vqa
    escape124 pcm_s32le wavpack
    ffv1 pcm_s8 wmav1
    ffvhuff pcm_u16be wmav2
    flac pcm_u16le wmv1
    wmv2 xan_dpcm xsub
    wmv3 xan_wc3 zlib
    wnv1 xl zmbv
    ws_snd1
    Enabled encoders:
    ac3 mjpeg pcm_u32be
    adpcm_adx mp2 pcm_u32le
    adpcm_g726 mpeg1video pcm_u8
    adpcm_ima_qt mpeg2video pcm_zork
    adpcm_ima_wav mpeg4 pgm
    adpcm_ms msmpeg4v1 pgmyuv
    adpcm_swf msmpeg4v2 png
    adpcm_yamaha msmpeg4v3 ppm
    alac pam qtrle
    asv1 pbm rawvideo
    asv2 pcm_alaw roq
    bmp pcm_f32be roq_dpcm
    dnxhd pcm_f32le rv10
    dvbsub pcm_f64be rv20
    dvdsub pcm_f64le sgi
    dvvideo pcm_mulaw snow
    flv mxf roq
    framecrc mxf_d10 swf
    gif null tg2
    gxf nut tgp
    h261 ogg vc1t
    h263 pcm_alaw voc
    h264 pcm_f32be wav
    image2 pcm_f32le yuv4mpegpipe
    image2pipe pcm_f64be
    Enabled protocols:
    file http tcp
    gopher pipe
    Enabled filters:
    crop
    Enabled bsfs:
    dump_extradata mov2textsub noise
    h264_mp4toannexb mp3_header_compress remove_extradata
    imx_dump_header mp3_header_decompress text2movsub
    mjpega_dump_header
    Enabled indevs:
    pr: -- empty file
    Enabled outdevs:
    pr: -- empty file
    License: LGPL
    Creating config.mak and config.h...
    # make
    make: Fatal error in reader: Makefile, line 5: Unexpected end of line seen

    I have the same issue, but will be trying the instructions in the link attached:
    http://chrismiles.livejournal.com/25439.html

  • Hardware Compatibility List for installation of solaris 10 on DELL units

    Hi,
    I have a requirement to install solaris 10 on a few Dell servers and desktops.
    I was unable to install on Dell PowerEdge SC1435 and noticed it is not on the HCL for Dell servers. This unit has dual core AMD Opteron processors. Is the HCL kept up to date, I noticed items 58 and 59 had the same description (SC1430). Should I abondon further attempts and go to the SC2950 which is on the HCL?
    Also on the desktop side, both my choices, Dell OptiPlex 745 dual core, and Dell Precision 690 dual core are not on the HCL. A possible alternative on the HCL is the Precision 670.
    Any info would be apprecitate.

    I am also having the same issue on a Dell Poweredge SC1435. I get a "ERROR: The disc you inserted is not a Solaris OS/DVD" right after I select the machine to automatically reboot after it finishes installing. It then kicks me out to a Unix shell prompt and I notice that the CD is no longer mounted when I do a "df -k". I've done some research on the web and none of the proposed solutions worked. I'm assuming this has something to do with hardware conflicts with the machine and the fact that the machine is not on the Hardware Compat List yet.
    Plus, I know my cd media is good, since I was able to install Solaris 10 x86 perfectly fine on my Dell Poweredge SC420. I'm using the latest Solaris 10 11/06 CD media.

  • How to install webgate on tomcat with solaris 10 AMD 64bits?

    Hi Experts
    I need to install a webgate on the webserver tomcat, but i found that installation is not possible because thes is not webgate for tomcat, many people recommended install a reverse proxy with Apache or OHS but i can't find a webgate installer on Solaris 10 AMD 64bits.
    Exists that version of webgate? or exist a workaround??
    what is your suggestion??

    Choose the Webserver and the WebGate from the OAM support matix.
    If OAM does not have WebGate for the platform where you have tomcat installed, if it is an option, you can install a webserver and WebGate on any OAM supported OS and configure Reverse Proxy. WebGate does not need to be on the same server/machine or on same platform.

  • Does OBIEE 10.1.3.4 support 64 bit processor AMD Opteron 8216

    Hi All,
    The OBIEE was installed on 64 bit processor AMD Opteron 8216, but the OBIEE installables were for 32 bit processor.
    Is it that OBIEE doesnt work properly with 64 Bit processors or is this any other issue.
    Help will be appreciated
    Edited by: user11001347 on Dec 18, 2009 2:42 AM

    Reuse the software installation, choose a custom installation and choose the component Oracle Business Intelligence ODBC of JDBC Driver
    Details here :
    http://download.oracle.com/docs/cd/E12096_01/books/AnyInConfig/AnyInConfigOptions2.html#wp1058229
    Cheers
    Nico

  • Processor and Core Count on AMD Opteron Servers

    hi
    I have a couple of HP DL385 G7 servers, which are dual processor 8 core servers, running Windows 2008 R2. These servers are reporting 16 CPUs each with 8 cores.
    The processors are AMD Opteron(tm) Processor 6136. Anyone know how to get this to report correctly ? I need to organise a licensing per core true up for some software applications.
    Thanks

    garethb,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://www.novell.com/support and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Forums Team
    http://forums.novell.com

  • Solaris 10 AMD Athlon Opteron BIOS microcode patch

    I've recently installed Solaris 10 on AMD Opteron machine, AMD64
    On boot, I receive a message "BIOS microcode patch not found...erratum 109" or something to that effect.
    this is followed by a bunch of "not enough space" comments.
    I've tried to find such a patch without success. Clearly, this points out my lack of knowledge. Perhaps someone can provide advice? AMD said "call Sun"

    I went back and did a reinstall of OS. I then downloaded and installed all the patches associated with the machine W1100Z. This has made this operational but issues remain. I decided to download the latest supplement.iso (2.5) and install the newer BIOS. The supplement.iso size is 427.89 MB. Unfortunately, at 427.11 MB I receive an error "not enough memory in the folder". I get the same result regardless of the target directory. I do suspect the installing the new boot image will work but the problem of how to get in on the machine remains.
    I apologize for the delayed response but I only have so much time. I have considered the purchase of a new machine would be a good choice, with OS already installed, but this one is autographed by James Goslin. An operating machine certainly would be a great SUN advertisement in my office. Plus, the tanking markets have significantly reduced my upgrade capability.
    You are probably correct though. Finding the disks may be a problem especially cdrom.
    cd c:\cdrom
    ls -l
    doesn't list anything

  • Installation on Solaris 10 x64

    Anybody succesfully installed SGD Enterprise 4.1 on Solaris 10 running on
    an AMD Opteron system? I keep getting:
    pwd: cannot determine current directory!
    /tmp/install"some garbage": no home directory
    If tried the pkgadd workaround, but this doesn't work

    Thanks Mike. Problem solved.
    Now I run into another error which I think I had in a past installation I have done on a suse machine:
    SAPCAR is unable to extract SAP kernel executables from the installationmaster directory even though permissions are right:
    MUT-03011  Execution of the command "/tmp/sapinst_exe.25861.1160659612/SAPCAR -x -v -g -i -f /UCKernel/DBINDEP/SAPEXE.SAR, instance.lst" finished with return code 29. Output:
    SAPCAR: no archives specified for extracting (error 29). No such file or directory
    I have tried calling SAPCAR from the command line and the SAPEXE.SAR is upacked fine.
    Tried to shorten the absolute path and the error is the same.
    Damien

  • Installation of Solaris 9 Intel Version in Windows XP PC

    I am very much interested in installation of Solaris 9 intel version in my PC which is windows XP version.
    My PC Processor : AMD Athlon
    I am not able to install solaris 9 in my PC.
    Sun boot version is Sun OS secondary boot version 3.0.
    During installation,i am going untill selection of type of installation. After selecting the Interactive type,the system is rebooting again without installing.
    Select the type of installation you want to perform
    (1) Solaris Interactive
    (2) Custom Jumpstart
    After selecting from above,the system is rebooting again without installing.
    Please help me with the installation.

    Try on HCL BigAdmins website to know if your hardware is supported

  • Installation of Solaris 9 intel version in windows XP

    I am very much interested in installation of Solaris 9 intel version in my PC which is windows XP version.
    My PC Processor : AMD Athlon
    I am not able to install solaris 9 in my PC.
    Sun boot version is Sun OS secondary boot version 3.0.
    During installation,i am going untill selection of type of installation. After selecting the Interactive type,the system is rebooting again without installing.
    Select the type of installation you want to perform
    (1) Solaris Interactive
    (2) Custom Jumpstart
    After selecting from above,the system is rebooting again without installing.
    Please help me with the installation.

    Are you trying to install Solaris 9 onto a server that is already running Windows XP and to keep Windows XP too?
    You'll need to create a partition on which to install Solaris, - search for Solaris Windows Dual Boot on docs.sun.com for more information.

  • 64 bit vs 32 bit Labview on an AMD Opteron 6380

    When running my code on an AMD Opteron 6380 processor, Labview 2014 64bit runs 4 times slower than when running with Labview 2014 32bit.  However the same code running on and INTEL Core i7 ran twice as fast with Labview 64bit vs 32bit.  Does anyone know why?  Note that the code is math intensive running a parallel loop that does not cummunicate with the outside world, i.e. no file access, property nodes, etc.Thank you.

    Yes the 6380 FPU is shared between two cores.  I just ran a diagnostic I made up that generates an array of 1 million random numbers, takes the average of those, and then excutes that repeatedly in a parallel loop.  The 6380 showed a 20% to 30% improvement in speed between LV64 & LV32 bit depending on how many cores I told it to use.  So that seems to make more sense.  The other code that I was running that ran 4 times slower has a complicated clusters within a cluster structure including a large look up table array that is being passed around amoung several vi's.  If it is moving that large amount of data around in memory, instead of just the pointer, that might explain it.  But why then would the AMD run slower with 64 bit (by a factor of 4) when compared with the Core i7 which ran twice as fast, which kind of makes sense to me if it is moving that data around with twice the bandwidth?

  • FMS performance on AMD Opteron vs Intel Xeon

    Hi All.
    We are facing some perfomance issues in several FMS4 running on AMD Opteron. This servers uses a lot more CPU than the ones that we own that run on a similar Intel Xeon with the same load.
    Does FMS run better on Intel Xeon? Is there any studies about it?
    Regards

    I am not processor expert , but what we recommend to our customers is Intel Xeon or faster processor. Most of our testing is done on Intel Xeon. I am not sure whether we have done any comparative study between processors.

  • Solaris support AMD

    i am new in solaris.
    I am trying to installing solaris in my laptop. it have AMD processor and 126 MB RAM
    but it's not installing. Is solaris support AMD ?
    If I insalling. the CD is talking (booting) .and the first screen is comming. it's stucked there. not going inside?
    can u please give me instructuon to this problem
    Thanks

    Hi,
    Make sure u r not using the sparc version Install disk.
    Cheers,
    Solstice.

  • Compatibility premiere pro cc 2014 amd opteron 180

    Hello. I would like to purchase adobe premiere pro cc 2014 so i downloaded the trial version. I installed it and it seem to work great with my computer. But before i buy it, i would like to know if someone can confirm that it's compatible with my cpu. For now i don't have any problems in the trial version. My processor is an amd opteron 180 dual core socket 939 overclocked at 2.6ghz under windows 7 sp1 64bit. All other parts of my computer reaches the system requirements besides the cpu is not an amd phenom ii as recommended. So assuming the trial version of premiere pro cc 2014 startups and runs without any problems, can i buy it and install it? Thanks!

    Hello. I would like to purchase adobe premiere pro cc 2014 so i downloaded the trial version. I installed it and it seem to work great with my computer. But before i buy it, i would like to know if someone can confirm that it's compatible with my cpu. For now i don't have any problems in the trial version. My processor is an amd opteron 180 dual core socket 939 overclocked at 2.6ghz under windows 7 sp1 64bit. All other parts of my computer reaches the system requirements besides the cpu is not an amd phenom ii as recommended. So assuming the trial version of premiere pro cc 2014 startups and runs without any problems, can i buy it and install it? Thanks!

  • MSI K8N Diamond PLUS e AMD Opteron 185

    Hi
    I have a MSI K8N Diamond PLUS (bios v.1.2), from the website the AMD Opteron 180 2.4 GHz socket 939 is compatible with the board.
    No compatibility info about  the cpu AMD Opteron 185 2.6 GHz socket 939. These 2 cpu are very very similar (only different clock).
    Do you know if it's really compatible with MSI K8N Diamond PLUS
    Thanks in advance

    It will work fine but isn't officially supported. Therefor post screen could show "unknown processor" but that's all.

Maybe you are looking for

  • Non-static method paint cannot be referenced from static context

    i cant seem to figure out this error dealing method paint: public class TemplateCanvas extends Canvas implements Runnable {     //static     public static final int STATE_IDLE      = 0;     public static final int STATE_ACTIVE    = 1;     public stat

  • Can forms be used with SPML ?

    Hi , IDM Forms end up as HTML Forms on the end-user JSP . Let's say we have the following XPRESS : <Field name='username'>         <Display class='Text'>           <Property name='title' value='IDMXMessages:LOGIN_FIELD_USERNAME'/>           <Property

  • Shorten the length of a repeat region

    I am trying to figure out how to shorten the length of the <li> in my repeat region. I want to limit each <li> to display no more than 40 characters in length on the web page. In the head of my page: <script type="text/javascript"> <!-- var dsFeedArt

  • After Effects CS5 crashes when I close it

    Dell optiplex 960, 2 Duo CPU, 8 gb ram, 64 bit, NVIDIA GeForce GT 330 with the latest drivers. WhenI close AE it crashes. I get: After Effects error: crash in progress. Last logged message was: <5264> <DynamicLink> <5> C:\Program Files (x86)\CommonFi

  • Characterstic variable with customerexit

    Hi, I have one customer exit variable requirement. requirement is like: If the user entry value( VAR1) is 'A' output from customer exit variable (CUSTVAR) is (1,6),If it's 'B' output is just 6. How can we achileve this? Thanks