FFMPEG screencast is not working for WoW under Wine (AMD Catalyst)

Hi all. I'm trying to record game video using ffmpeg, but each time when I actually switch my focus to the game window, the picture freezes. Here is the example: http://www.youtube.com/watch?v=r4kfKpgcTAE This is World of Warcraft running under wine. I use AMD Catalyst beta-driver from the unofficial repository (mentioned here) on x64 system (lib32-catalyst-utils also installed).
I tried this:
ffmpeg -f x11grab -r 30 -i :0.0 -f alsa -i hw:0,0 -acodec flac -vcodec ffvhuff test.mkv (from wiki)
and some variations I found over the Internet:
ffmpeg -f x11grab -r 30 -i :0.0 -f alsa -i hw:0,0 -acodec flac -vcodec ffvhuff test.mkv
None of them worked.
I guess it's due to driver, because when I tried recordMyDesktop tool a few days ago with xf86-video-ati driver it recorded wideo. But when I switched to proprietary drider, both ffmpeg and recordMyDesktop are not working. I'm not going to change video driver because it's performance in video-games, so I'm wondering if there is any solution to my problem (except windowed-mode!).
Thanks.
Last edited by ghostwolf (2013-07-19 05:02:16)

Hi,
I had similar problems when trying to record OpenGL games with FFMpeg CLI. I use the catalyst-test drivers for my AMD HD 6870.
You could try downloading SimpleScreenRecorder via yaourt; get both, including the lib32-simplescreenrecorder.
There will be some conflicts, but choosing to replace some files hasn't caused any problems.
Make sure you have both lib32-libpulse and lib32-alsa-plugins installed (pacman).
Once everything is in set, open SSR (SimpleScreenRecorder); set audio input to:
- Record Microphone
- Backend: PulseAudio
- Source: Monitor of Built-in Audio Analog Stereo
I chose to output as MKV ; H.264 ; MP3 @128
Select Start Recording and fire up WoW. I was able to playback the game-play video (full screen 1920x1080) with audio.
You may need different settings from what I have, notably the audio, but it should record in full screen mode.
Good luck !

Similar Messages

Quartz filters are not working (for PDF)

It seems that quartz filters are not working for me under Mountin Lion. I have tried to export, print, etc everything in Preview, Automator, ColorSync. It simply won't apply the filters to my PDFs.
Anyone experienced similar issues? Is it a known bug?

I kinda have the same problem, except its only my custom filters that aren´t working in ColorSynch. The other filters get applied as usual, but I can not change any of the preformed filters within ColorSynch, and the "live update from filter inspector" doesn´t work if I try to apply changes or use my custom filters.
The custom filters I have, were created prior to my upgrade from snow leopard to moutain lion.
I´ve understood that there has been multiple problems with the filters in lion ++
If there isn´t a quick fix to this, does anybody know of any programs I can use to apply filters without having to buy Adobe Pro, my use is not for simply decreasing file size, but mostly for editing colors prior to prinitng. And its not sufficient to use the preformed filters unfortunately.

Substitution written under cost center accounting is not working for tcode MB1B but working for MIGO_GI

Hi All
Do you know why this behaviour different for subtitution written under cost center accounting.
We have written substitution using coding block table. Logic of substitution is in case of any GL maintained in a set is being used for posting , then we will replace the cost center with profit center vlaue. Reason being we have same naming convention for Cost center and Profit center.
Thanks
Sonia

Hi,
MB1B is t-code for stock transfer posting.
Stock transfer posting generate FI document using balance sheet account, not P&L account.
Because you don’t create cost elements using balance sheet accounts related to stock, I think that Substitution written under cost center accounting is not working for tcode MB1B is right.

MAM application is not working for some users

Hi All,
Tha MAM application is not working for some users.Different users have different workcenters other than that I dont see any other change. When I run MAM30_090_GETLIST in the backend I can see the no of customized users.But I cant see same no of users in the MEREP_207 table for the Syncbo MAM30_090 and strcture id TOP in the middleware. There is a data when I checked under worklist monitor for that user. But neither the MAM application nor MAM data is downloading to that device.
If I use different user on the same device I can see the MAM application and MAM data.
What could be the wrong in this case. Any help would be highly appreciated.
Mobile Client:MI 70 SP 15 Patch 0 Build 200802280918
Middleware:SAP NetWeaver 2004s with Patch leve 15
Backend:SAP ECC 6.0
Application:MAM 3.0
Thanks and Regards,
Ameer.

Hi,
from your description the source of your issue is quite obvious: some of the MAM users configured in spro are not configured properly.
For T01 SyncBos the number of TOP records in merep_207 MUST be the same as number of headers returned by an appropriate getList FM in the backend.
You need to solve this before you can go any further.
Reason why a record is not recorded in MEREP_207 - getdetail failed for whatever reason. So execute MAM30_ML_getdetail for each of the users that is not replicated in the middleware and check if there are errors in RETURN table. If there is no error - one of the common reason for replication fail is when there are records in item tables that have duplicate primary keys.
Regards,
Larissa Limarova

OC4J JSP Debugging not working for all the jsps

Hi,
Initially I was not able to debug jsps using Eclipse and OC4J. The jsp debugging started working once I made the below changes:
1) global-web-application.xml is modified
Changed the attribute development="true" in orion-web-app
Added the below init param for the JspServlet
<init-param>
<param-name>debug</param-name>
<param-value>class</param-value>
</init-param>
If the jsps are present in a sub directory under the webcontent none of the breakpoints are working. I am still be able to view the jsp pages on the browser.
Tools: Oracle 10g Application Server Standalone version(10.1.3.5.0), JDK5, Windows XP, Eclipse Indigo
Project Structure:
Test (Eclipse Dynamic Web Project)
-WebContent
Sample.jsp ( Breakpoints are working)
-subF (Folder)
SubSample.jsp (Breakpoints are not working)
-WEB-INF
web.xml
Debugging worked for http://localhost:8888/Test/Sample.jsp
Debugging not working for http://localhost:8888/Test/subF/SubSample.jsp
Any help is highly appreciated.
Regards
Danny

This tells there is not enough main memory (not disk space) for the program to run.
- You can look the dump in ST22, it will have suggestions on increasing the ROLLAREA??, you can forward that to Basis.
- Most likely you will not have any more memory to assign so the above may not be feasible. Try to rework your query so it works with less data.

Search is not working for MS Word documents

Hi,
serious help required for search operation.
Search operation is not working for MS Word Documents.
i noticed that, after chekin word documents its status comes as
GENWWW.
i already enable file format & extension for word file.
can somebody help me in this regard.
Thankx in advance

Hi
Please enable the tracing option for :
requestaudit,indexer
Enable Full Verbose Tracing .
Checkin the Ms-Word document and once it fails then check the view server o/p under System Audit Information page and post the error message happening for indexing operation .
Thanks
Srinath

Speakers not working for Skype only on Windows 8.1

My speakers or headphones are not working for Skype desktop but work fine for any music or videos or other programms. Any help to resolve it? in Tools>Options>Audio Settings> headphones does not show up. Everything was working fine but it just happend a day before., i havent installed any program that could make problem.

This is very strange because, as you are saying this happened without any change to any software on your computer. I suggest the following:
1. To help the team analyze the issue, provide logs as described in this link under Skype for Windows Desktop and attach it to your post.
2. As an interim solution you can try using a virtual audio device that will be a middle man between skype and your physical audio device.

Battery not working for 7 hours

battery not working for 7 hours.. it working only for 3 hours or 4 hours

I'm sorry, got confused. You're not going to get 7 hours on your battery. Apple says "Up to 7 hours". That means they got 7 hours under optimum circumstances and with certain usage. You need to keep your screen brightness as low as you can live with. Minimum music and video. Check some email, a little office type stuff. Forget games. You might get close but you won't get 7 hours.
In the small print of their adds Apple spells out exactly how much of what they did to get 7 hours.

Lion Server DNS service not working for locally created zones. Caching working fine.

OS Lion Server DNS service not working for local zones. Was fine under Snow leopard server but Lion server upgrade has severely broken my DNS and web sites. Zones look fine under Server Admin but keep getting "query failed (SERVFAIL) for xxxx at /SourceCache/bind9/bind9-42/bind9/bin/named/query.c:3921" in the logs. BTW - Server Admin cant seem to see the log file either.
Surely someone actually tested that DNS still worked on Lion?

I upgraded from Snow Leopard Server to Lion Server on day 01. I hit the same issue where, after the upgrade, my Lion Server stopped serving names for my private local domain.
I finally took a few minutes to figure out what was wrong. After turning on debug logging and looking through the logs, I found my particular issue, now resolved.
The issue I had was, when the domain initially was setup when I installed Snow Leopard Server, for some reason it created a zone just for the server (in my case, something like zone "s-01.mydomain.priv"), and a separate zone for all the other machines (zone "mydomain.priv", containing all the private IPs for my local domain). I never messed with it because it worked, but generally I would have put all of them in the same zone.
My zone "mydomain.priv" had a nameserver and mail exchanger entry for my server, s-01.mydomain.priv. I could see this in the Server Admin app on the DNS bubble, Zones tab, mydomain.priv selected, and the General Info panel. This was fine in Snow Leopard. This was failing the zone load in the updated bind for Lion Server, though. The issue was that the "mydomain.priv" zone was referencing the s-01.mydomain.priv server, which was not defined in the "mydomain.priv" zone but rather in the "s-01.mydomain.priv" zone.
My fix:
1. In Server Admin, add the server to the zone "mydomain.priv". I put an A record (Add Machine) in the "mydomain.priv" zone for my server named s-01.mydomain.priv.
2. shut down DNS on the OS X Lion Server (hit the Stop DNS button on Server Admin).
3. edit /etc/named.conf by hand, removing the specialized zones that contianed just the server. In this case, it would be the section titled 'zone "s-01.mydomain.priv"' and the section titled 'zone "3.10.1.10.in-addr.arpa"'. Your in-addr.arpa zone name will change based on whatever your server IP address was. My internal one happened to have s-01.mydomain.priv mapped to 10.1.10.3.
4. Once the specialized zones for just the server were removed, I started the DNS up again. Instead of serving four zones as it had in OS X Snow Leopard Server, it now servers two zones. And, now, it is resolving my local machines for the mydomain.priv zone.
YMMV. I did note that it wasn't totally necessary to do step 3, but I never really understood the need for the specialized domain, and keeping it around would have a copy of data that would just confuse things.
Hope that helps. That's been the only hiccup I've noticed updating to OS X Lion Server thus far.

"Track Shipment" is iOS4 does not work for Canada Post tracking numbers

Not 100% sure this is the best forum to post this but couldn't find an iOS specific forum.
When an email arrives with a shipment tracking number embedded in it, iOS4 is smart enough to recognize it and turn it into a link. You click the link, select "Track Shipment" and in theory you get sent off to the appropriate shipment tracking website.
Problem is that this does not work for Canada Post tracking numbers, I get sent to the USPS tracking site instead of the Canada Post one. I assume that the number format is similar but there must be a way to distinguish between CPC tracking numbers and USPS tracking numbers (by range ?).

This has since become working in 4.0 and higher.
I noticed I now get a notes folder for each of my email accounts (ie. in my case; MobileMe gets one, Gmail gets another, and Virgin Media a yet another). And all three since accordingly correctly between Notes mailbox on iPhone 4 and it's counterpart Notes mailbox in the mac mail app under Reminders section.
Additionally, just like other main mailboxes (inbox, drafts, sent, trash, junk), they also have a "unified" box at the top in both mac and iphone, in order to view notes in all email accounts at the same time.
Hooray Apple, shame it took so long, but at least it's here now

Broadband did not work for days

my broadband did not work for days. I spent two lengthy periods of time on the phone to sky, once fo 1.5 hrs and the other time for 1 hour. Both phone calls achieved nothing. Eventually the internet started working again. The sky service status online advised that my area had no problems. The service from sky has been incredibly rubbish and has made me very angry. In order to get myself online i had to pay BT Wifi £8 for a day pass. Sky have been very generous and have compensated me 62 pence for the time I have been without the internet. My question to sky is..... will youplease refund me the £8 I have spent and give me some sort of compensation for the dismal service provided. I have tried to call calling you this morning but you phone is engaged, I tired emailin gyou but you have no email, I tried the live chat, but it is busy. The forum is the only place I can go.

Sky don't post here and won't respond to you here. The forum is customer to customer support only.
Official complaints process as below:
http://help.sky.com/articles/how-to-make-a-complaint
Sky are under no obligation to compensate you for the loss of service and the 62p is, I assume, the cost of your package for the days it was not working.

I got a replacment iphone 4 but it will not work for me please help??

i got a replacment iphone 4 but it will not work for me it has been charging for nearly 4 hours now but the screen still has the battery in the red and also will not connect to itunes is there something im doing wrong??

You'll have to get it serviced or replaced again, contact Apple, usually a replaced device is under warranty for 90 days as well.
Apple - Support - Service Answer Center

Groups does not work in Mail under Mavericks

Its not just smart groups, by I cannot get any of my Groups to work with Mail under Mavericks. I am weary of having to type out the address for each person separately. Is there some better way?

I don't know why typing he name of a regular group does not work for you, but…
Another way is to open the address panel, select a group, then select all in the group, then click the two button.

My charger is not working for my computer.

My charger is not working for my computer. The green light does not turn on. Is it possible that there is something wrong with my computer and not just my charger? Ive tried using another charger and the same thing happened, no green light.

phelpy wrote: Ive tried using another charger and the same thing happened, no green light.
Does not sound so good.
Start here:
http://support.apple.com/kb/ts1713
If you are still under warranty, no fee.
https://selfsolve.apple.com/agreementWarrantyDynamic.do

I have an event in my calendar that was sent by someone who does not work for the company anymore and I am reminded 2 times a week. How can I remove it?

I have an event in my calendar that was sent by someone that does not work for the company anymore and I am reminded 2 times a week. How do I delete it?

Tap on the event to open the event. Click the 'Edit' button in the event bubble, then press the 'Delete Event' button at the bottom of the Edit pop-up. It's a little different for events that come through Microsoft Exchange, you tap the event to bring up bubble and click the 'Details' button, and then press 'Decline' to remove the event.

FFMPEG screencast is not working for WoW under Wine (AMD Catalyst)

Similar Messages

Maybe you are looking for