Fglrx and Invalid Xorg

[tyler@myhost ~]$ ./*run
Creating directory fglrx-install
Verifying archive integrity... All good.
Uncompressing ATI Proprietary Linux Driver-8.28.8.....................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
==================================================
ATI Technologies Linux Driver Installer/Packager
==================================================
Detected configuration:
Architecture: i686 (32-bit)
X Server: Xorg 7.2.0
Detected version of X does not have a matching 'x720' directory
You may override the detected version using the following syntax:
X_VERSION=<xdir> ./ati-driver-installer-<ver>-<arch>.run [--install]
The following values may be used for <xdir>:
x430 XFree86 4.3.x
x430_64a XFree86 4.3.x 64-bit
x680 X.Org 6.8.x
x680_64a X.Org 6.8.x 64-bit
x690 X.Org 6.9.x
x690_64a X.Org 6.9.x 64-bit
x700 X.Org 7.0.x
x700_64a X.Org 7.0.x 64-bit
x710 Unknown X Window
x710_64a Unknown X Window
Removing temporary directory: fglrx-install
Any idea how to fix this?
Thanks,

Sigi wrote:
shining wrote:Out of curiosity, why do you need fglrx ?
Because I'm unable to get 3D/dri working with the xf86-video-ati driver and would like to play UrbanTerror on that old machine .
Hm, 3d/dri should work perfectly with r200 chipset. It even works nearly correctly on r300 chipsets now.
But good luck playing UrbanTerror with that, I tried this game recently again (on a gf 5900xt), and it was not exactly smooth, I had fps drops to 10-20 fps.

Similar Messages

Xorg warnings for fglrx and error for keyboard

HI everyone !
After a recent installation i'm getting some warnings about fglrx and error about keyboard . BUt everything works ok , i just need to disappear those warnings and errors
This is my whole Xorg0.log
[ 59.865]
X.Org X Server 1.10.2
Release Date: 2011-05-28
[ 59.866] X Protocol Version 11, Revision 0
[ 59.866] Build Operating System: Linux 2.6.38-ARCH x86_64
[ 59.866] Current Operating System: Linux arch 2.6.38-ARCH #1 SMP PREEMPT Mon May 23 22:02:08 CEST 2011 x86_64
[ 59.866] Kernel command line: root=/dev/sda3 ro
[ 59.866] Build Date: 30 May 2011 08:18:15AM
[ 59.866]
[ 59.866] Current version of pixman: 0.22.0
[ 59.866] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 59.867] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 59.867] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jun 6 18:01:38 2011
[ 59.868] (==) Using config file: "/etc/X11/xorg.conf"
[ 59.868] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 59.868] (==) ServerLayout "aticonfig Layout"
[ 59.868] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 59.868] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 59.868] (**) | |-->Device "aticonfig-Device[0]-0"
[ 59.868] (==) Automatically adding devices
[ 59.868] (==) Automatically enabling devices
[ 59.868] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 59.868] Entry deleted from font path.
[ 59.868] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 59.868] Entry deleted from font path.
[ 59.868] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 59.868] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 59.868] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 59.868] (II) Loader magic: 0x7d3440
[ 59.868] (II) Module ABI versions:
[ 59.868] X.Org ANSI C Emulation: 0.4
[ 59.868] X.Org Video Driver: 10.0
[ 59.868] X.Org XInput driver : 12.2
[ 59.868] X.Org Server Extension : 5.0
[ 59.869] (--) PCI:*(0:1:0:0) 1002:68c1:1025:036e rev 0, Mem @ 0xe0000000/268435456, 0xf2100000/131072, I/O @ 0x00006000/256, BIOS @ 0x????????/131072
[ 59.869] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 59.869] (II) LoadModule: "extmod"
[ 59.870] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 59.870] (II) Module extmod: vendor="X.Org Foundation"
[ 59.870] compiled for 1.10.2, module version = 1.0.0
[ 59.870] Module class: X.Org Server Extension
[ 59.870] ABI class: X.Org Server Extension, version 5.0
[ 59.870] (II) Loading extension MIT-SCREEN-SAVER
[ 59.870] (II) Loading extension XFree86-VidModeExtension
[ 59.870] (II) Loading extension XFree86-DGA
[ 59.870] (II) Loading extension DPMS
[ 59.870] (II) Loading extension XVideo
[ 59.870] (II) Loading extension XVideo-MotionCompensation
[ 59.870] (II) Loading extension X-Resource
[ 59.870] (II) LoadModule: "dbe"
[ 59.870] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 59.870] (II) Module dbe: vendor="X.Org Foundation"
[ 59.870] compiled for 1.10.2, module version = 1.0.0
[ 59.870] Module class: X.Org Server Extension
[ 59.870] ABI class: X.Org Server Extension, version 5.0
[ 59.870] (II) Loading extension DOUBLE-BUFFER
[ 59.870] (II) LoadModule: "glx"
[ 59.870] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 59.871] (II) Module glx: vendor="FireGL - ATI Technologies Inc."
[ 59.871] compiled for 6.9.0, module version = 1.0.0
[ 59.871] (II) Loading extension GLX
[ 59.871] (II) LoadModule: "record"
[ 59.871] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 59.871] (II) Module record: vendor="X.Org Foundation"
[ 59.871] compiled for 1.10.2, module version = 1.13.0
[ 59.871] Module class: X.Org Server Extension
[ 59.871] ABI class: X.Org Server Extension, version 5.0
[ 59.871] (II) Loading extension RECORD
[ 59.871] (II) LoadModule: "dri"
[ 59.872] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 59.872] (II) Module dri: vendor="X.Org Foundation"
[ 59.872] compiled for 1.10.2, module version = 1.0.0
[ 59.872] ABI class: X.Org Server Extension, version 5.0
[ 59.872] (II) Loading extension XFree86-DRI
[ 59.872] (II) LoadModule: "dri2"
[ 59.872] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 59.872] (II) Module dri2: vendor="X.Org Foundation"
[ 59.872] compiled for 1.10.2, module version = 1.2.0
[ 59.872] ABI class: X.Org Server Extension, version 5.0
[ 59.872] (II) Loading extension DRI2
[ 59.872] (II) LoadModule: "fglrx"
[ 59.872] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 59.891] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[ 59.891] compiled for 1.4.99.906, module version = 8.85.6
[ 59.891] Module class: X.Org Video Driver
[ 59.892] (II) Loading sub module "fglrxdrm"
[ 59.892] (II) LoadModule: "fglrxdrm"
[ 59.892] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 59.892] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 59.892] compiled for 1.4.99.906, module version = 8.85.6
[ 59.892] (II) ATI Proprietary Linux Driver Version Identifier:8.85.6
[ 59.892] (II) ATI Proprietary Linux Driver Release Identifier: 8.85
[ 59.892] (II) ATI Proprietary Linux Driver Build Date: Apr 19 2011 21:30:04
[ 59.892] (--) using VT number 7
[ 59.894] (WW) Falling back to old probe method for fglrx
[ 59.901] (II) Loading PCS database from /etc/ati/amdpcsdb
[ 59.902] (--) Chipset Supported AMD Graphics Processor (0x68C1) found
[ 59.902] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
[ 59.902] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
[ 59.902] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
[ 59.902] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
[ 59.902] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
[ 59.902] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
[ 59.902] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
[ 59.902] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
[ 59.902] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
[ 59.903] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:5) found
[ 59.903] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[ 59.903] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 59.903] (II) AMD Video driver is signed
[ 59.903] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 59.903] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 59.903] (II) fglrx(0): pEnt->device->identifier=0xe53db0
[ 59.903] (II) fglrx(0): === [xdl_xs110_atiddxPreInit] === begin
[ 59.903] (II) Loading sub module "vgahw"
[ 59.903] (II) LoadModule: "vgahw"
[ 59.903] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 59.904] (II) Module vgahw: vendor="X.Org Foundation"
[ 59.904] compiled for 1.10.2, module version = 0.1.0
[ 59.904] ABI class: X.Org Video Driver, version 10.0
[ 59.904] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 59.904] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 59.904] (==) fglrx(0): Default visual is TrueColor
[ 59.904] (**) fglrx(0): Option "DPMS" "true"
[ 59.904] (==) fglrx(0): RGB weight 888
[ 59.904] (II) fglrx(0): Using 8 bits per RGB
[ 59.904] (==) fglrx(0): Buffer Tiling is ON
[ 59.904] (II) Loading sub module "fglrxdrm"
[ 59.904] (II) LoadModule: "fglrxdrm"
[ 59.904] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 59.904] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 59.904] compiled for 1.4.99.906, module version = 8.85.6
[ 59.906] ukiDynamicMajor: found major device number 252
[ 59.906] ukiDynamicMajor: found major device number 252
[ 59.906] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 59.906] ukiOpenDevice: node name is /dev/ati/card0
[ 59.906] ukiOpenDevice: open result is 10, (OK)
[ 59.906] ukiOpenByBusid: ukiOpenMinor returns 10
[ 59.906] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 59.906] (==) fglrx(0): NoAccel = NO
[ 59.906] (==) fglrx(0): ATI 2D Acceleration Architecture enabled
[ 59.906] (--) fglrx(0): Chipset: "AMD Radeon HD 6500M/5600/5700 Series" (Chipset = 0x68c1)
[ 59.906] (--) fglrx(0): (PciSubVendor = 0x1025, PciSubDevice = 0x036e)
[ 59.906] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[ 59.906] (--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
[ 59.906] (--) fglrx(0): MMIO registers at 0xf2100000
[ 59.906] (--) fglrx(0): I/O port at 0x00006000
[ 59.906] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 59.973] (II) fglrx(0): ATIF platform detected
[ 59.976] (II) fglrx(0): AC Adapter is used
[ 59.984] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 60.092] (II) Loading sub module "vbe"
[ 60.092] (II) LoadModule: "vbe"
[ 60.093] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 60.093] (II) Module vbe: vendor="X.Org Foundation"
[ 60.093] compiled for 1.10.2, module version = 1.1.0
[ 60.093] ABI class: X.Org Video Driver, version 10.0
[ 60.093] (II) fglrx(0): VESA BIOS detected
[ 60.093] (II) fglrx(0): VESA VBE Version 3.0
[ 60.093] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 60.093] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[ 60.093] (II) fglrx(0): VESA VBE OEM Software Rev: 12.20
[ 60.093] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
[ 60.093] (II) fglrx(0): VESA VBE OEM Product: MADISON
[ 60.093] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 60.136] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[ 60.136] (--) fglrx(0): Video RAM: 1048576 kByte, Type: DDR3
[ 60.136] (II) fglrx(0): PCIE card detected
[ 60.136] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 60.136] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 60.139] (II) fglrx(0): Using adapter: 1:0.0.
[ 60.269] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x40000000)
[ 60.278] (II) fglrx(0): Interrupt handler installed at IRQ 46.
[ 60.278] (II) fglrx(0): RandR 1.2 support is enabled!
[ 60.278] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 60.278] (==) fglrx(0): Center Mode is disabled
[ 60.278] (II) Loading sub module "fb"
[ 60.278] (II) LoadModule: "fb"
[ 60.278] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 60.278] (II) Module fb: vendor="X.Org Foundation"
[ 60.278] compiled for 1.10.2, module version = 1.0.0
[ 60.278] ABI class: X.Org ANSI C Emulation, version 0.4
[ 60.278] (II) Loading sub module "ddc"
[ 60.278] (II) LoadModule: "ddc"
[ 60.278] (II) Module "ddc" already built-in
[ 60.344] (II) fglrx(0): Finished Initialize PPLIB!
[ 60.344] (II) fglrx(0): Output LVDS using monitor section aticonfig-Monitor[0]-0
[ 60.345] (II) fglrx(0): Output DFP1 has no monitor section
[ 60.345] (II) fglrx(0): Output CRT1 has no monitor section
[ 60.345] (II) Loading sub module "ddc"
[ 60.345] (II) LoadModule: "ddc"
[ 60.345] (II) Module "ddc" already built-in
[ 60.345] (II) fglrx(0): Connected Display0: LVDS
[ 60.345] (II) fglrx(0): Display0 EDID data ---------------------------
[ 60.345] (II) fglrx(0): Manufacturer: CMO Model: 1599 Serial#: 0
[ 60.345] (II) fglrx(0): Year: 2010 Week: 7
[ 60.345] (II) fglrx(0): EDID Version: 1.3
[ 60.345] (II) fglrx(0): Digital Display Input
[ 60.345] (II) fglrx(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 60.345] (II) fglrx(0): Gamma: 2.20
[ 60.345] (II) fglrx(0): No DPMS capabilities specified
[ 60.345] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 60.345] (II) fglrx(0): First detailed timing is preferred mode
[ 60.345] (II) fglrx(0): redX: 0.578 redY: 0.339 greenX: 0.312 greenY: 0.556
[ 60.345] (II) fglrx(0): blueX: 0.158 blueY: 0.149 whiteX: 0.313 whiteY: 0.329
[ 60.345] (II) fglrx(0): Manufacturer's mask: 0
[ 60.345] (II) fglrx(0): Supported detailed timing:
[ 60.345] (II) fglrx(0): clock: 75.5 MHz Image Size: 344 x 193 mm
[ 60.345] (II) fglrx(0): h_active: 1366 h_sync: 1426 h_sync_end 1466 h_blank_end 1576 h_border: 0
[ 60.345] (II) fglrx(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 798 v_border: 0
[ 60.345] (II) fglrx(0): N156B3-L0B
[ 60.345] (II) fglrx(0): CMO
[ 60.345] (II) fglrx(0): N156B3-L0B
[ 60.345] (II) fglrx(0): EDID (in hex):
[ 60.345] (II) fglrx(0): 00ffffffffffff000daf991500000000
[ 60.345] (II) fglrx(0): 07140103802213780a3d9594564f8e28
[ 60.345] (II) fglrx(0): 26505400000001010101010101010101
[ 60.345] (II) fglrx(0): 0101010101017a1d56d250001e303c28
[ 60.345] (II) fglrx(0): 360058c110000018000000fe004e3135
[ 60.345] (II) fglrx(0): 3642332d4c30420a2020000000fe0043
[ 60.345] (II) fglrx(0): 4d4f0a202020202020202020000000fe
[ 60.345] (II) fglrx(0): 004e31353642332d4c30420a20200048
[ 60.345] (II) fglrx(0): End of Display0 EDID data --------------------
[ 60.351] (II) fglrx(0): EDID for output LVDS
[ 60.351] (II) fglrx(0): Manufacturer: CMO Model: 1599 Serial#: 0
[ 60.351] (II) fglrx(0): Year: 2010 Week: 7
[ 60.351] (II) fglrx(0): EDID Version: 1.3
[ 60.351] (II) fglrx(0): Digital Display Input
[ 60.351] (II) fglrx(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 60.351] (II) fglrx(0): Gamma: 2.20
[ 60.351] (II) fglrx(0): No DPMS capabilities specified
[ 60.351] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 60.351] (II) fglrx(0): First detailed timing is preferred mode
[ 60.351] (II) fglrx(0): redX: 0.578 redY: 0.339 greenX: 0.312 greenY: 0.556
[ 60.351] (II) fglrx(0): blueX: 0.158 blueY: 0.149 whiteX: 0.313 whiteY: 0.329
[ 60.351] (II) fglrx(0): Manufacturer's mask: 0
[ 60.351] (II) fglrx(0): Supported detailed timing:
[ 60.351] (II) fglrx(0): clock: 75.5 MHz Image Size: 344 x 193 mm
[ 60.351] (II) fglrx(0): h_active: 1366 h_sync: 1426 h_sync_end 1466 h_blank_end 1576 h_border: 0
[ 60.351] (II) fglrx(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 798 v_border: 0
[ 60.351] (II) fglrx(0): N156B3-L0B
[ 60.351] (II) fglrx(0): CMO
[ 60.351] (II) fglrx(0): N156B3-L0B
[ 60.351] (II) fglrx(0): EDID (in hex):
[ 60.351] (II) fglrx(0): 00000000000000003a20454449442028
[ 60.351] (II) fglrx(0): 696e20686578293a0a002020000a0028
[ 60.351] (II) fglrx(0): 26505400000001015100000000000000
[ 60.351] (II) fglrx(0): 00000000000000003a20466972737420
[ 60.351] (II) fglrx(0): 64657461696c65642074696d696e6720
[ 60.351] (II) fglrx(0): 697320707265666572726564206d6f64
[ 60.351] (II) fglrx(0): 650a000a0020202020202020000000fe
[ 60.351] (II) fglrx(0): 004e31353642332d4100000000000000
[ 60.351] (II) fglrx(0): EDID vendor "CMO", prod id 5529
[ 60.351] (II) fglrx(0): Printing DDC gathered Modelines:
[ 60.351] (II) fglrx(0): Modeline "1366x768"x0.0 75.46 1366 1426 1466 1576 768 771 777 798 -hsync -vsync (47.9 kHz)
[ 60.351] (II) fglrx(0): Printing probed modes for output LVDS
[ 60.351] (II) fglrx(0): Modeline "1366x768"x60.0 75.46 1366 1426 1466 1576 768 771 777 798 -hsync -vsync (47.9 kHz)
[ 60.351] (II) fglrx(0): Modeline "1360x768"x60.0 75.46 1360 1426 1466 1576 768 771 777 798 -hsync -vsync (47.9 kHz)
[ 60.351] (II) fglrx(0): Modeline "1280x768"x60.0 75.46 1280 1426 1466 1576 768 771 777 798 -hsync -vsync (47.9 kHz)
[ 60.351] (II) fglrx(0): Modeline "1280x720"x60.0 75.46 1280 1426 1466 1576 720 771 777 798 -hsync -vsync (47.9 kHz)
[ 60.351] (II) fglrx(0): Modeline "1024x768"x60.0 75.46 1024 1426 1466 1576 768 771 777 798 -hsync -vsync (47.9 kHz)
[ 60.351] (II) fglrx(0): Modeline "1024x600"x60.0 75.46 1024 1426 1466 1576 600 771 777 798 -hsync -vsync (47.9 kHz)
[ 60.351] (II) fglrx(0): Modeline "800x600"x60.0 75.46 800 1426 1466 1576 600 771 777 798 -hsync -vsync (47.9 kHz)
[ 60.351] (II) fglrx(0): Modeline "800x480"x60.0 75.46 800 1426 1466 1576 480 771 777 798 -hsync -vsync (47.9 kHz)
[ 60.351] (II) fglrx(0): Modeline "640x480"x60.0 75.46 640 1426 1466 1576 480 771 777 798 -hsync -vsync (47.9 kHz)
[ 60.351] (II) fglrx(0): EDID for output DFP1
[ 60.351] (II) fglrx(0): EDID for output CRT1
[ 60.351] (II) fglrx(0): Output LVDS connected
[ 60.351] (II) fglrx(0): Output DFP1 disconnected
[ 60.351] (II) fglrx(0): Output CRT1 disconnected
[ 60.351] (II) fglrx(0): Using exact sizes for initial modes
[ 60.351] (II) fglrx(0): Output LVDS using initial mode 1366x768
[ 60.351] (II) fglrx(0): Display dimensions: (340, 190) mm
[ 60.351] (II) fglrx(0): DPI set to (102, 102)
[ 60.351] (II) fglrx(0): Adapter AMD Radeon HD 6500M/5600/5700 Series has 2 configurable heads and 1 displays connected.
[ 60.351] (==) fglrx(0): PseudoColor visuals disabled
[ 60.351] (II) Loading sub module "ramdac"
[ 60.351] (II) LoadModule: "ramdac"
[ 60.351] (II) Module "ramdac" already built-in
[ 60.352] (==) fglrx(0): NoDRI = NO
[ 60.352] (==) fglrx(0): Capabilities: 0x00000000
[ 60.352] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 60.352] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 60.352] (==) fglrx(0): UseFastTLS=0
[ 60.352] (==) fglrx(0): BlockSignalsOnLock=1
[ 60.352] (--) Depth 24 pixmap format is 32 bpp
[ 60.352] (II) Loading extension ATIFGLRXDRI
[ 60.352] (II) fglrx(0): doing swlDriScreenInit
[ 60.352] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 60.352] ukiDynamicMajor: found major device number 252
[ 60.352] ukiDynamicMajor: found major device number 252
[ 60.352] ukiDynamicMajor: found major device number 252
[ 60.352] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 60.352] ukiOpenDevice: node name is /dev/ati/card0
[ 60.352] ukiOpenDevice: open result is 15, (OK)
[ 60.352] ukiOpenByBusid: ukiOpenMinor returns 15
[ 60.352] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 60.352] (II) fglrx(0): [uki] DRM interface version 1.0
[ 60.352] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[ 60.352] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x8e000
[ 60.352] (II) fglrx(0): [uki] mapped SAREA 0x8e000 to 0x7faa77519000
[ 60.352] (II) fglrx(0): [uki] framebuffer handle = 0x8f000
[ 60.352] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 60.352] (II) fglrx(0): swlDriScreenInit done
[ 60.352] (II) fglrx(0): Kernel Module Version Information:
[ 60.352] (II) fglrx(0): Name: fglrx
[ 60.352] (II) fglrx(0): Version: 8.85.6
[ 60.352] (II) fglrx(0): Date: Apr 19 2011
[ 60.352] (II) fglrx(0): Desc: ATI FireGL DRM kernel module
[ 60.352] (II) fglrx(0): Kernel Module version matches driver.
[ 60.352] (II) fglrx(0): Kernel Module Build Time Information:
[ 60.352] (II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.38-ARCH
[ 60.352] (II) fglrx(0): Build-Kernel MODVERSIONS: no
[ 60.352] (II) fglrx(0): Build-Kernel __SMP__: no
[ 60.352] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 60.352] (II) fglrx(0): [uki] register handle = 0x00090000
[ 60.369] (II) fglrx(0): DRI initialization successfull
[ 60.369] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01004000
[ 60.369] (==) fglrx(0): Backing store disabled
[ 60.369] (II) Loading extension FGLRXEXTENSION
[ 60.369] (**) fglrx(0): DPMS enabled
[ 60.369] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 60.369] (**) fglrx(0): Textured Video is enabled.
[ 60.369] (II) LoadModule: "glesx"
[ 60.370] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 60.370] (II) Module glesx: vendor="X.Org Foundation"
[ 60.370] compiled for 1.4.99.906, module version = 1.0.0
[ 60.370] (II) Loading extension GLESX
[ 60.370] (II) fglrx(0): GLESX enableFlags = 592
[ 60.370] (II) fglrx(0): GLESX is enabled
[ 60.370] (II) LoadModule: "amdxmm"
[ 60.371] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 60.371] (II) Module amdxmm: vendor="X.Org Foundation"
[ 60.371] compiled for 1.4.99.906, module version = 2.0.0
[ 60.380] (II) Loading extension AMDXVOPL
[ 60.380] (II) Loading extension AMDXVBA
[ 60.381] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[ 60.384] (II) fglrx(0): Enable composite support successfully
[ 60.384] (WW) fglrx(0): Option "VendorName" is not used
[ 60.384] (WW) fglrx(0): Option "ModelName" is not used
[ 60.384] (II) fglrx(0): X context handle = 0x1
[ 60.384] (II) fglrx(0): [DRI] installation complete
[ 60.384] (==) fglrx(0): Silken mouse enabled
[ 60.384] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 60.384] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[ 60.384] (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
[ 60.384] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
[ 61.343] (--) RandR disabled
[ 61.343] (II) Initializing built-in extension Generic Event Extension
[ 61.343] (II) Initializing built-in extension SHAPE
[ 61.343] (II) Initializing built-in extension MIT-SHM
[ 61.343] (II) Initializing built-in extension XInputExtension
[ 61.343] (II) Initializing built-in extension XTEST
[ 61.343] (II) Initializing built-in extension BIG-REQUESTS
[ 61.343] (II) Initializing built-in extension SYNC
[ 61.343] (II) Initializing built-in extension XKEYBOARD
[ 61.343] (II) Initializing built-in extension XC-MISC
[ 61.343] (II) Initializing built-in extension SECURITY
[ 61.343] (II) Initializing built-in extension XINERAMA
[ 61.343] (II) Initializing built-in extension XFIXES
[ 61.343] (II) Initializing built-in extension RENDER
[ 61.343] (II) Initializing built-in extension RANDR
[ 61.343] (II) Initializing built-in extension COMPOSITE
[ 61.343] (II) Initializing built-in extension DAMAGE
[ 61.345] ukiDynamicMajor: found major device number 252
[ 61.346] ukiDynamicMajor: found major device number 252
[ 61.346] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 61.346] ukiOpenDevice: node name is /dev/ati/card0
[ 61.346] ukiOpenDevice: open result is 16, (OK)
[ 61.346] ukiOpenByBusid: ukiOpenMinor returns 16
[ 61.346] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 61.456] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[ 61.472] (II) fglrx(0): Enable the clock gating!
[ 61.473] (II) fglrx(0): Setting screen physical size to 361 x 203
[ 61.607] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 61.607] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 61.607] (II) LoadModule: "evdev"
[ 61.607] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 61.608] (II) Module evdev: vendor="X.Org Foundation"
[ 61.608] compiled for 1.10.0, module version = 2.6.0
[ 61.608] Module class: X.Org XInput Driver
[ 61.608] ABI class: X.Org XInput driver, version 12.2
[ 61.608] (II) Using input driver 'evdev' for 'Power Button'
[ 61.608] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 61.608] (**) Power Button: always reports core events
[ 61.608] (**) Power Button: Device: "/dev/input/event5"
[ 61.630] (--) Power Button: Found keys
[ 61.630] (II) Power Button: Configuring as keyboard
[ 61.630] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
[ 61.630] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 61.630] (**) Option "xkb_rules" "evdev"
[ 61.630] (**) Option "xkb_model" "evdev"
[ 61.630] (**) Option "xkb_layout" "us"
[ 61.670] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 61.670] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 61.670] (II) Using input driver 'evdev' for 'Video Bus'
[ 61.670] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 61.670] (**) Video Bus: always reports core events
[ 61.670] (**) Video Bus: Device: "/dev/input/event6"
[ 61.686] (--) Video Bus: Found keys
[ 61.686] (II) Video Bus: Configuring as keyboard
[ 61.686] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/LNXVIDEO:01/input/input6/event6"
[ 61.686] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 61.686] (**) Option "xkb_rules" "evdev"
[ 61.686] (**) Option "xkb_model" "evdev"
[ 61.686] (**) Option "xkb_layout" "us"
[ 61.983] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 61.983] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 61.983] (II) Using input driver 'evdev' for 'Power Button'
[ 61.983] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 61.984] (**) Power Button: always reports core events
[ 61.984] (**) Power Button: Device: "/dev/input/event2"
[ 62.000] (--) Power Button: Found keys
[ 62.000] (II) Power Button: Configuring as keyboard
[ 62.000] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 62.000] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 62.000] (**) Option "xkb_rules" "evdev"
[ 62.000] (**) Option "xkb_model" "evdev"
[ 62.000] (**) Option "xkb_layout" "us"
[ 62.000] (II) config/udev: Adding input device Lid Switch (/dev/input/event4)
[ 62.000] (II) No input driver/identifier specified (ignoring)
[ 62.000] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 62.000] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 62.000] (II) Using input driver 'evdev' for 'Sleep Button'
[ 62.001] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 62.001] (**) Sleep Button: always reports core events
[ 62.001] (**) Sleep Button: Device: "/dev/input/event3"
[ 62.040] (--) Sleep Button: Found keys
[ 62.040] (II) Sleep Button: Configuring as keyboard
[ 62.040] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3"
[ 62.040] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[ 62.040] (**) Option "xkb_rules" "evdev"
[ 62.040] (**) Option "xkb_model" "evdev"
[ 62.040] (**) Option "xkb_layout" "us"
[ 62.044] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/event9)
[ 62.044] (**) Microsoft Wired Keyboard 600: Applying InputClass "evdev keyboard catchall"
[ 62.044] (II) Using input driver 'evdev' for 'Microsoft Wired Keyboard 600'
[ 62.044] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 62.044] (**) Microsoft Wired Keyboard 600: always reports core events
[ 62.044] (**) Microsoft Wired Keyboard 600: Device: "/dev/input/event9"
[ 62.066] (--) Microsoft Wired Keyboard 600: Found keys
[ 62.066] (II) Microsoft Wired Keyboard 600: Configuring as keyboard
[ 62.066] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input9/event9"
[ 62.066] (II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 600" (type: KEYBOARD)
[ 62.066] (**) Option "xkb_rules" "evdev"
[ 62.066] (**) Option "xkb_model" "evdev"
[ 62.066] (**) Option "xkb_layout" "us"
[ 62.067] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/event10)
[ 62.067] (**) Microsoft Wired Keyboard 600: Applying InputClass "evdev keyboard catchall"
[ 62.067] (II) Using input driver 'evdev' for 'Microsoft Wired Keyboard 600'
[ 62.067] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 62.067] (**) Microsoft Wired Keyboard 600: always reports core events
[ 62.067] (**) Microsoft Wired Keyboard 600: Device: "/dev/input/event10"
[ 62.093] (--) Microsoft Wired Keyboard 600: Found 1 mouse buttons
[ 62.093] (--) Microsoft Wired Keyboard 600: Found scroll wheel(s)
[ 62.093] (--) Microsoft Wired Keyboard 600: Found relative axes
[ 62.093] (--) Microsoft Wired Keyboard 600: Found absolute axes
[ 62.093] (--) Microsoft Wired Keyboard 600: Found x and y absolute axes
[ 62.093] (--) Microsoft Wired Keyboard 600: Found keys
[ 62.093] (II) Microsoft Wired Keyboard 600: Configuring as mouse
[ 62.093] (II) Microsoft Wired Keyboard 600: Configuring as keyboard
[ 62.093] (II) Microsoft Wired Keyboard 600: Adding scrollwheel support
[ 62.093] (**) Microsoft Wired Keyboard 600: YAxisMapping: buttons 4 and 5
[ 62.093] (**) Microsoft Wired Keyboard 600: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 62.093] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.1/input/input10/event10"
[ 62.093] (II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 600" (type: KEYBOARD)
[ 62.093] (**) Option "xkb_rules" "evdev"
[ 62.093] (**) Option "xkb_model" "evdev"
[ 62.093] (**) Option "xkb_layout" "us"
[ 62.093] (EE) Microsoft Wired Keyboard 600: failed to initialize for relative axes.
[ 62.093] (WW) Microsoft Wired Keyboard 600: found 37 axes, limiting to 36.
[ 62.094] (II) Microsoft Wired Keyboard 600: initialized for absolute axes.
[ 62.094] (**) Microsoft Wired Keyboard 600: (accel) keeping acceleration scheme 1
[ 62.094] (**) Microsoft Wired Keyboard 600: (accel) acceleration profile 0
[ 62.094] (**) Microsoft Wired Keyboard 600: (accel) acceleration factor: 2.000
[ 62.094] (**) Microsoft Wired Keyboard 600: (accel) acceleration threshold: 4
[ 62.094] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/js0)
[ 62.094] (II) No input driver/identifier specified (ignoring)
[ 62.095] (II) config/udev: Adding input device Razer Razer DeathAdder (/dev/input/event14)
[ 62.095] (**) Razer Razer DeathAdder: Applying InputClass "evdev pointer catchall"
[ 62.095] (II) Using input driver 'evdev' for 'Razer Razer DeathAdder'
[ 62.095] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 62.095] (**) Razer Razer DeathAdder: always reports core events
[ 62.095] (**) Razer Razer DeathAdder: Device: "/dev/input/event14"
[ 62.120] (--) Razer Razer DeathAdder: Found 12 mouse buttons
[ 62.120] (--) Razer Razer DeathAdder: Found scroll wheel(s)
[ 62.120] (--) Razer Razer DeathAdder: Found relative axes
[ 62.120] (--) Razer Razer DeathAdder: Found x and y relative axes
[ 62.120] (II) Razer Razer DeathAdder: Configuring as mouse
[ 62.120] (II) Razer Razer DeathAdder: Adding scrollwheel support
[ 62.120] (**) Razer Razer DeathAdder: YAxisMapping: buttons 4 and 5
[ 62.120] (**) Razer Razer DeathAdder: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 62.120] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input14/event14"
[ 62.120] (II) XINPUT: Adding extended input device "Razer Razer DeathAdder" (type: MOUSE)
[ 62.120] (II) Razer Razer DeathAdder: initialized for relative axes.
[ 62.120] (**) Razer Razer DeathAdder: (accel) keeping acceleration scheme 1
[ 62.120] (**) Razer Razer DeathAdder: (accel) acceleration profile 0
[ 62.120] (**) Razer Razer DeathAdder: (accel) acceleration factor: 2.000
[ 62.120] (**) Razer Razer DeathAdder: (accel) acceleration threshold: 4
[ 62.120] (II) config/udev: Adding input device Razer Razer DeathAdder (/dev/input/mouse1)
[ 62.120] (II) No input driver/identifier specified (ignoring)
[ 62.121] (II) config/udev: Adding input device 1.3M WebCam (/dev/input/event8)
[ 62.121] (**) 1.3M WebCam: Applying InputClass "evdev keyboard catchall"
[ 62.121] (II) Using input driver 'evdev' for '1.3M WebCam'
[ 62.121] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 62.121] (**) 1.3M WebCam: always reports core events
[ 62.121] (**) 1.3M WebCam: Device: "/dev/input/event8"
[ 62.146] (--) 1.3M WebCam: Found keys
[ 62.146] (II) 1.3M WebCam: Configuring as keyboard
[ 62.146] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1:1.0/input/input8/event8"
[ 62.146] (II) XINPUT: Adding extended input device "1.3M WebCam" (type: KEYBOARD)
[ 62.146] (**) Option "xkb_rules" "evdev"
[ 62.146] (**) Option "xkb_model" "evdev"
[ 62.146] (**) Option "xkb_layout" "us"
[ 62.147] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event11)
[ 62.147] (II) No input driver/identifier specified (ignoring)
[ 62.147] (II) config/udev: Adding input device HDA ATI SB Mic (/dev/input/event12)
[ 62.147] (II) No input driver/identifier specified (ignoring)
[ 62.148] (II) config/udev: Adding input device HDA ATI SB Headphone (/dev/input/event13)
[ 62.148] (II) No input driver/identifier specified (ignoring)
[ 62.149] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 62.149] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 62.149] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 62.149] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 62.149] (**) AT Translated Set 2 keyboard: always reports core events
[ 62.149] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 62.173] (--) AT Translated Set 2 keyboard: Found keys
[ 62.173] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 62.173] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 62.173] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 62.173] (**) Option "xkb_rules" "evdev"
[ 62.173] (**) Option "xkb_model" "evdev"
[ 62.173] (**) Option "xkb_layout" "us"
[ 62.174] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event7)
[ 62.174] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 62.174] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 62.174] (II) LoadModule: "synaptics"
[ 62.174] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 62.174] (II) Module synaptics: vendor="X.Org Foundation"
[ 62.174] compiled for 1.10.2, module version = 1.4.0
[ 62.174] Module class: X.Org XInput Driver
[ 62.174] ABI class: X.Org XInput driver, version 12.2
[ 62.174] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 62.174] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 62.174] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 62.174] (**) Option "Device" "/dev/input/event7"
[ 62.306] (--) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5772
[ 62.306] (--) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 5086
[ 62.306] (--) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 62.306] (--) SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 62.306] (--) SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 62.306] (**) Option "TapButton1" "1"
[ 62.306] (**) Option "TapButton2" "2"
[ 62.306] (**) Option "TapButton3" "3"
[ 62.413] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 62.413] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 62.466] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event7"
[ 62.466] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[ 62.466] (**) SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 62.466] (**) SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 62.466] (**) SynPS/2 Synaptics TouchPad: AccelFactor is now 0.035
[ 62.467] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 62.467] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 62.467] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 62.467] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 62.546] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 62.547] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 62.547] (II) No input driver/identifier specified (ignoring)
[ 62.547] (II) config/udev: Adding input device PC Speaker (/dev/input/event1)
[ 62.547] (II) No input driver/identifier specified (ignoring)
[ 62.559] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 62.905] (II) fglrx(0): EDID vendor "CMO", prod id 5529
[ 62.905] (II) fglrx(0): Printing DDC gathered Modelines:
[ 62.905] (II) fglrx(0): Modeline "1366x768"x0.0 75.46 1366 1426 1466 1576 768 771 777 798 -hsync -vsync (47.9 kHz)
[ 76.015] (II) fglrx(0): EDID vendor "CMO", prod id 5529
[ 76.015] (II) fglrx(0): Printing DDC gathered Modelines:
[ 76.015] (II) fglrx(0): Modeline "1366x768"x0.0 75.46 1366 1426 1466 1576 768 771 777 798 -hsync -vsync (47.9 kHz)
[ 76.610] Warning: LookupWindow()/SecurityLookupWindow() are deprecated. Please convert your driver/module to use dixLookupWindow().
And here is my xorg.conf file , basically it's the same at aticonfig --initial , i didn't change anything yet
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
If anyone knows what's going on , and how i can disappear those messages , and if someone has any suggestions i would be grateful if you could help me out .
Thanks in advance !!!

Thanks for posting this wizzard. After an upgrade of xorg I have been struggling to make a conf file that worked. Adding to a minimal file is easier than pruning a full one. I used your minimal xorg.conf and added:
Option "PreferredMode" "1280x1024"
in the monitor section and now all is well. (I think my monitor is non-standards-compliant. It causes problems so the option is needed)
Last edited by greenfuse (2008-12-02 08:34:12)

Fglrx and mesa

Alright, i just uninstalled mesa, and reinstalled fglrx.
However, when i do a fglrxinfo, i get:
$ fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.2 (1.5 Mesa 6.5.1)
does anyone know how to fix this?

You shouldn't be uninstalling mesa. You need mesa, ati-fglrx, and ati-fglrx-utils to get DRI working with fglrx.
After you have those installed and your xorg.conf configured, if it's still not working, could you post any error (EE) or warning (WW) messages in /var/log/Xorg.0.log?

Dear sir I bought my iPhone 4 from Apple store in Charlotte N/C about 2years ago without contract. Now I tried to upgrade it to iOS 7.0.4.but after that my phone not work with last sim card. And invalid sim appeared.so I bought it without contract but it

Dear sir
I bought my iPhone 4 from Apple store in Charlotte N/C about 2years ago without contract.
Now I tried to upgrade it to iOS 7.0.4.but after that my phone not work with last sim card.
And invalid sim appeared.so I bought it without contract but it seems to be lock in my country
Please tell me whats the matter?
My phone serial no 86034HTCA4T
Modem firmware 04.12.09
Thanks

Without contract is not the same as unlocked. The update to iOS 7 relocked
the iPhone to the wireless carrier to which it was originally locked. You must
contact that wireless carrier to see if they offer unlocking and if you qualify.
If you used jailbreak or other hack to unlock the iPhone initially, the method
used may prevent a legitimate unlock from succeeding and may render your
iPhone unuseable.

What now? I got repair failed "Keys out of order" and "Invalid extent entry"

What now? I tried to verify & then repair disk and I got "repair failed" "Keys out of order" and "Invalid extent entry"

You've booted from your OS installer disk, ran Repair Disk from Disk Utility? If so then you need a stronger disk repair utility like DiskWarrier to rebuild the directory.
BTW, update your profile information.

What are valid and invalid email address characters

What are valid and invalid email address characters in Exchange 2010, for example can you have Conan.O'[email protected] is there a document that shows the valid and invalid sysmbols?

Hi
The format of email addresses is
local-part@domain where the local-part may be up to 64 characters long and the
domain name may have a
maximum of 253 characters - but the maximum 256 characters length of a forward or reverse path restricts the entire email address to be no more than 254 characters.[1]
The formal definitions are in RFC 5322 (sections 3.2.3
and 3.4.1) and RFC 5321 - with a more readable form given in
the informational RFC 3696[2]
and the associated errata.
Local part
The local-part of the email address may use any of these
ASCII characters
RFC 5322 Section
3.2.3:
Uppercase and lowercase English letters (a–z, A–Z) (ASCII: 65-90, 97-122)
Digits
0 to
9 (ASCII: 48-57)
Characters
!#$%&'*+-/=?^_`{|}~ (ASCII: 33, 35-39, 42, 43, 45, 47, 61, 63, 94-96, 123-126)
Character
. (dot, period, full stop) (ASCII: 46) provided that it is not the first or last character, and
provided also that it does not appear two or more times consecutively (e.g. [email protected] is not allowed.).
Special characters are allowed with restrictions. They are:
o
Space and
"(),:;<>@[\] (ASCII: 32, 34, 40, 41, 44, 58, 59, 60, 62, 64, 91-93)
The restrictions for special characters are that they must only be used when contained between quotation marks, and that 3 of them (The
space, backslash \ and
quotation mark " (ASCII: 32, 92, 34)) must also be preceded by a backslash
\ (e.g.
A quoted string may exist as a dot separated entity within the local-part, or it may exist when the outermost quotes are the outermost characters of the local-part
(e.g. abc."defghi"[email protected] or
"abcdefghixyz"@example.com are allowed. Conversely,
abc"defghi"[email protected] is not; neither is
abc\"def\"[email protected]). Quoted strings and characters however, are not commonly used.
RFC 5321 also
warns that "a host that expects to receive mail SHOULD avoid defining mailboxes where the Local-part requires (or uses) the Quoted-string form".
The local-part "postmaster" is treated specially - it is case-insensitive, and should be forwarded to the server's administrator. Technically all other local-parts
are case sensitive, therefore [email protected] and [email protected] specify different mailboxes. However most organizations treat uppercase and lowercase letters as equivalent, and also do not allow use of the technically valid characters
(space, ? and ^). Organizations are free to restrict the forms of their own email addresses as desired, e.g.,
Windows Live Hotmail,
for example, only allows creation of email addresses using alphanumerics, dot (.), underscore (_)
and hyphen (-).[3]
Systems that send mail must be capable of handling outgoing mail for all valid addresses. Contrary to the relevant standards, some defective systems treat certain
legitimate addresses as invalid and fail to handle mail to these addresses. Hotmail, for example, refuses to send mail to any address containing any of the following standards-permissible characters:
!#$%*/?^`{|}~
Domain part
The domain name part of an email address has to conform to strict guidelines: it must match the requirements for a
hostname,
consisting of letters, digits, hyphens and dots. In addition, the domain part may be an
IP address
literal, surrounded by square braces, such as jsmith@[192.168.2.1], although this is rarely seen except
in email spam.
Examples
Valid email addresses
<tt>[email protected]</tt>
<tt>[email protected]</tt>
<tt>[email protected]</tt>
<tt>much."more\ unusual"@example.com</tt>
<tt>very.unusual."@"[email protected]</tt>
<tt>very."(),:;<>[]".VERY."very@\\\ \"very"[email protected]</tt>
Invalid email addresses
<tt>Abc.example.com</tt> (an @ character must separate the local and domain parts)
<tt>[email protected]</tt> (character dot(.) is last in local part)
<tt>[email protected]</tt> (character dot(.) is double)
<tt>A@b@[email protected]</tt> (only one @ is allowed outside quotation marks)
<tt>a"b(c)d,e:f;g<h>i[j\k][email protected]</tt> (none of the special characters in this local part
is allowed outside quotation marks)
<tt>just"not"[email protected]</tt> (quoted strings must be dot separated, or the only element making
up the local-part)
<tt>this is"not\[email protected]</tt> (spaces, quotes, and backslashes may only exist when within
quoted strings and preceded by a slash)
<tt>this\ still\"not\\[email protected]</tt> (even if escaped (preceded by a backslash), spaces, quotes,
and backslashes must still be contained by quotes)
Terence Yu
TechNet Community Support

Needto find no. of valid and invalid objects in a tablespace

Hi,
Can anyone tell me how to find the no. of objects that are valid and invalid in a tablespace.Below are the 2 tablespace that i want the info for
SQL> select
2 fs.tablespace_name "Tablespace",
(df.totalspace - fs.freespace) "Used MB",
3    4 fs.freespace "Free MB",
5 df.totalspace "Total MB",
6 round(100 * (fs.freespace / df.totalspace)) "Pct. Free"
7 from
8 (select
9 tablespace_name,
10 round(sum(bytes) / 1048576) TotalSpace
11 from
12 dba_data_files
13 group by
14 tablespace_name
15 ) df,
16 (select
17 tablespace_name,
18 round(sum(bytes) / 1048576) FreeSpace
19 from
20 dba_free_space
21 group by
22 tablespace_name
23 ) fs
24 where
25 df.tablespace_name = fs.tablespace_name
26 and fs.tablespace_name IN ('FPR_GL_I02','FPR_GL_D02');
Tablespace                        Used MB    Free MB   Total MB Pct. Free
FPR_GL_I02                             18       4500       4518        100
FPR_GL_D02                           1980     119250     121230         98Thanks in advance...........

You can try with below query too.
idle> select b.object_name,b.object_type,b.status,b.owner,a.tablespace_name from dba_objects b, dba_segments a where b.status='INVALID' and a.tablespace_name='USERS';
OBJECT_NAME OBJECT_TYPE STATUS OWNER TABLESPACE
QSRO_DDL_TRIG TRIGGER INVALID DB_QIPS USERS
QSRL_USRDT_TRIG TRIGGER INVALID DB_QIPS USERS
QSRL_DDL_TRIG TRIGGER INVALID DB_QIPS USERS
DEMO VIEW INVALID DAVID USERS
QSRO_DDL_TRIG TRIGGER INVALID DB_QIPS USERS
QSRL_USRDT_TRIG TRIGGER INVALID DB_QIPS USERS
QSRL_DDL_TRIG TRIGGER INVALID DB_QIPS USERS
DEMO VIEW INVALID DAVID USERS
QSRO_DDL_TRIG TRIGGER INVALID DB_QIPS USERS

(SOLVED) Keyboard lights go on and off and then Xorg crashes

Strangest thing happened when I turned on my computer this morning:
As I was doing my usual business (only Firefox running on top of Gnome), keyboard LEDs started going on and off (e.g. scroll lock and caps lock turn on, num lock off, then I press num lock, and they go off, and then one of them reappears again, etc - no pattern), and then Xorg just crashed.
I'm running the latest kernel with latest nvidia drivers.
This is what Xorg's log shows:
Backtrace:
0: /usr/bin/Xorg (xorg_backtrace+0x28) [0x45a8d8]
1: /usr/bin/Xorg (0x400000+0x61a19) [0x461a19]
2: /lib/libpthread.so.0 (0x7f677c98e000+0xee80) [0x7f677c99ce80]
3: /lib/libc.so.6 (__select+0x13) [0x7f677bce34e3]
4: /usr/bin/Xorg (WaitForSomething+0x1ba) [0x45814a]
5: /usr/bin/Xorg (0x400000+0x45d72) [0x445d72]
6: /usr/bin/Xorg (0x400000+0x219ec) [0x4219ec]
7: /lib/libc.so.6 (__libc_start_main+0xfd) [0x7f677bc39b6d]
8: /usr/bin/Xorg (0x400000+0x21599) [0x421599]
Fatal server error:
Caught signal 3 (Quit). Server aborting
The entire xorg log is here: http://pastebin.ca/1823592
After the fact, everything seemed to be working fine again. Xorg restarted and keyboard was behaving.
Any ideas what this could be? It never happened before...
Last edited by Pechorin (2010-03-09 09:45:09)

I'm not really sure, but it seems that vmware workstation + evdev was the culprit.
I uninstalled Vmware Workstation and everything seems to be back to normal. I couldn't bother to check which modules were loaded and how was this confusing to Xorg, but it's "solved" now.

Error "Unkown Bravo Error" and "Invalid Container Error"

I am trying to render in After effects and keep getting the error "Unkown Bravo Error" and "Invalid Container Error". What do I do to resolve this?

Try using the "secret" preferences to purge every couple of frames. If you hold Shift while clicking on After Effects > Preferences > General, the Secret menu should pop up in the sidebar of the Preferences dialog.
Alternatively, if rendering to a QuickTime with the video codec set to PNG instead of Animation didn't work, try rendering to a PNG sequence and not a video format at all.

Please help! Invalid node structure and invalid record count

My MacBook Pro is about 6.5 years old. I upgraded to Snow Leopard 2 years ago and added RAM at the same time. My first problem ever occurred three days ago when my computer got super sluggish, I restarted and got the gray screen with apple and spinning wheel...no boot up. I ran disk utility from the snow leopard install disk and found "invalid node structure" and "invalid record count". After reading on here what to do...try to repair the disk and so on with no success I went out and bought Disk Warrior. Got home expecting to fix everything and Disc Warrior won't boot...I just get a file with a question mark and the disc is ejected. I tried erasing the hard drive but was only able to use the "don't erase data" option. Then I tried to reinstall Snow Leopard with no luck. Now I am stuck. Any ideas?
One thing to note is I am to the point of not caring about the files on the hard drive, I was a dummy and never backed them up...lesson learned! I just want my computer back without having to spend $1000+ for a new one. Then again I am always willing to do that too as a last resort.
PLEASE HELP!

When you contact Alsoft, make sure you let them know that you are using Snow Leopard (10.6.8).
Try the following in the meantime -
Disconnect all peripherals from your computer.
Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk.
Restart your computer when done.
Repair permissions after you reach the desktop-http://support.apple.com/kb/HT2963 and restart your computer.
Try DiskWarrarior again if it's combatible with the os system.
YOu cannot reformat until you get your issue corrected.

I've bought an Iphone 4S in the UK. Using the phone in Argentina, it displays the "No Service" and "Invalid SIM" errors sporadically. The only solution is to reset the phone (switching it ON/OFF). Any suggestions?

I've bought an Iphone 4S in the UK. Using the phone in Argentina, it displays the "No Service" and "Invalid SIM" errors sporadically. The only solution is to reset the phone (switching it ON/OFF). Also most of the time, the SMS are not sent nor received...
The phone was checked by my carrier (phone company, Movistar) and they replaced the micro SIM card. bear in mind that there's no Apple shop here and the Iphone 4S is NOT available in Argentina!!!
Any suggestions?

Dear all,
(THIS CONCERNS MTC TOUCH CUSTOMERS IN LEBANON)
I've received an email with a solution to the problem; you have to update to the new iOS 5.0.1 firmware (9A406)!! It's been 1Hour and so far my iPHone 4S is working just fine. Please follow carefully the below instructions:
RUN A FULL BACK UP BEFORE DOING ANY OF THIS
1. Download the new iOS 5.0.1 firmware (9A406) from the internet. (800MB)
2. Connect your iPhone 4S to iTunes.
3. Once connected, two options will show: ‘restore’ and ‘check for update’.
4. Press down SHIFT and choose ‘check for update’. (if you click ‘check for update’ without pressing down SHIFT doesn’t work.)
5. Select the new firmware (9A406). Note that the file should be renamed ‘iPhone4,1_5.0.1_9A406_Restore.ipsw’ (instead of ‘iPhone4,1_5.0.1_9A406_Restore.zip’), i.e. changing the file extension from ZIP to IPSW. iTunes will now work alone and update your iPhone 4S.
A full back up is recommended before firmware upgrade.
HOPE THIS HELPS

Basically my fone just decided to say invalid sim so by looking on the internet ive restored my device, after doing this it still came up with no service and invalid sim, itunes say that the activtion server is down at the mo, i wanted to know wen the act

Basically my fone just decided to say invalid sim so by looking on the internet ive restored my device, after doing this it still came up with no service and invalid sim, itunes say that the activtion server is down at the mo, i wanted to know wen the activtion server will be back online and will it solve my problem with no service and invalid sim error

I was quite surprised by that. And I've been off for a little because I've been giving final exams at the college where I work. Now with break I will be spending a little more time on here until I have to start getting ready for the Spring semester. I have experienced a couple of interesting posters in the past week though. I wa afraid one was going to reach through the CAT 5 and grab me around the neck.

The gift card I am trying to use comes up as having and invalid code.

The gift card I am trying to use comes up as having and invalid code. Got it as a gift for Christmas and trying to make an iTunes purchse.

With any luck, the following document may be of some assistance with that:
iTunes Store: Invalid, inactive, or illegible codes

Multicast dropped and invalid packets

Hi,
I've read all I can on the cisco.com site and not found a good explanation of dropped and invalid IGMP packets.
This output is displayed from a cat os 'show igmp statistics', dropped packets and also invalid packets.
What are these and what can cause them??
Thanks

Hello David,
do you happen to see entries in your logs such as:
%MCAST-6-IGMP_PKT_DROPPED: IGMP: IGMP Queue full (high packet rate/CPU busy), dropped [dec] packet(s) in last 5 minutes
According to CCO, ´this message indicates that the IGMP packet queue is not able to accommodate additional packets. Any additional packets will be dropped without processing.
Recommended Action: Reduce the IGMP packet rate to prevent packets from being dropped´
You might want to try and enable IGMP Snooping (set igmp enable) on your switch, in order to reduce the number of IGMP packets sent...
Regards,
GP

I keep getting and invalid username message

Why am I getting and invalid username message when I try to sign in to an app I just purchased.

Hi Chris
First, You should know that the developer certified version for Oracle Apps development is 6i patch 18 (there's a new patch 19 also). On Discoverer, it's Ok to use 10G.
Now, on the connection issue, by the message it is related to the user/pass entered. If in Discoverer You are using oracle apps integration You may be using and application user and password, but that can be used to connect to the database.
Ask in Your project for apps password (may be apps or welcome12 if and on demand environment) for the development environment, or check if there's is a custom schema defined for development and get the user/pass for that one also. You may try with applsyspub/pub meanwhile to check connection but it's a restricted user.

Fglrx and Invalid Xorg

Similar Messages

Maybe you are looking for