FI Substitution exit to Business area not possible in the Standard SAP

Hi Experts
I need to derive the business area from the funds centre (local government) in the FI Substitution.  This is allowed in the Co Substitution though but it must come ahead of OKB9.
We get the following with loading the Bank Statement FF_5.
Error: (00 298) Formatting error in the field COBL-GSBER ; see next message
How can I get the Business areas in the allowed fields in the FI Substitution?
Please help
Kind regards
Dawn

Dear,
Go to SM30 Enter VWTYGB01click on Maintain
Postion the folloiwng:
Boolean Class = 9
Type = S
Table = BSEG
Field = GSBER
Untick the Column Exclude
Once done please re execute the OBBH, Business Area will be shown there.
Br, Vivek

Similar Messages

  • The PDFs digitally signed are not compatible with the standard PDF/A

    Firmando digitalmente i file PDF/A-1b perdono la compatibilità con lo standard
    Dopo parecchi tentativi (per esser certo di escludere problemi eventualmente derivanti dal contenuto dell'elaborato), ho creato un PDF da Blocco Note (S.O.: Windows XP S.P.3) con Acrobat XI impostato con "PDF/A-1b:2005 (RGB)".
    Tramite la "Verifica preliminare" di Acrobat XI mi viene confermato che il file è PDF/A-1b.
    Lo firmo digitalmente in modalità anteprima.
    Mi viene indicato che il documento non contiene contenuto dinamico né dipendenze esterne.
    Confermo e lo salvo.
    Lo chiudo, lo riapro e procedo con la "Verifica preliminare"
    Mi viene segnalato che il file NON è compatibile con PDF/A-1b (2005)
    In molti ambienti la lunghezza massima delle stringhe è di 65.535 byte.
    Dettagli del documento:
    Valori trigger:
    Stringa più lunga usata: 219308.0
    { 28 0 obj/Contents }
    Ho provato a firmare sia con l'aspetto grafico (firma grafica) sia con testo standard (default), il risultato è lo stesso.

    Avevo rinunciato a "controbattere" alla risposta che mi era stata data, perché non avevo tempo, perché avevo risolto diversamente e anche soprattutto perché speravo che Adobe, vista l'importanza dell'argomento (Firma digitale e rispetto dello standard PDF/A), si decidesse ad intervenire e riuscisse a sistemare quello che io ritengo un "GRAVE" errore di Acrobat Professional XI.
    Con altre applicazioni, sono in grado di firmare gli stessi file riuscendo a mantenere la conformità allo standard PDF/A.
    Solo firmando con Acrobat ottengo quell'errore.
    Quindi i casi sono 2: o Acrobat XI non è in grado di firmare correttamente o è la sua verifica preliminare che non funziona perché non segnala l'errore con i PDF firmati con altri programmi.
    In ogni caso (a mio avviso) siamo in presenza di un errore "GRAVE" di Acrobat.
    Non riesco a spiegarmi diversamente il fatto che un PDF/A-1b con firma abilitata per convalida a lungo termine, applicata con un programma diverso da Acrobat XI, riesca a mantenere la conformità allo standard e fra l'altro "certificato" dallo stesso Acrobat XI Pro (verifica preliminare).
    Tengo anche a precisare che pur disabilitando l'aggiunta automatica delle informazioni di verifica, come suggerito da isakten, non cambia nulla. Almeno per l'edizione italiana (versione 11.0.10) le firme vengono salvate ABILITATE per convalida a lungo termine.
    Anche nel caso in cui un PDF/A firmato (ovviamente con altro programma) senza abilitazione per convalida a lungo termine, poi aperto in Acrobat XI, applicata la convalida di tutte le firme, aggiunte le informazioni di verifica ed infine salvato, MANTIENE la conformità allo standard (così almeno mi conferma la verifica preliminare di Acrobat)
    Tutte le prove sono state eseguite su diversi PC e su versioni diverse di Windows (XP, Vista, Seven)
    Per non avere problemi, continuerò a firmare con altri programmi, ma non mi dispiacerebbe che Adobe risolvesse questo problema.

  • Business area not determined for line item?

    Hello All,
    I am trying to create a sales order. When I enter a line item and enter plant for the item, it gives me an error "Business area not determined for the line item #" and it does not accept the item.
    I have already checked in the enterprise structure in IMG that the business area is defined and assigned for this plant.
    Is there anything else need to be done? Do we have to define or assign the business area in material master?
    I would appreciate  if somebody can answer.
    Thanks.

    There are three rules for determining a business area:
    o   Rule 1: plant and division 
    o   Rule 2: for each sales area          
    o   Rule 3: for each plant and item division
    See what you are missing

  • Business area not picking up for substitution...

    Hi
    I have created susbstitution for GL account..for substituting business area for GL account....(tax GL account
    Tax line item is automatically created in document.....i want business area to be pickep up for the same.
    We want substitution create for Business area updating ;- When Document has 4 line item at the time of TAX and TDS line item the Business area not update, MIRO Document also not update the Business area.
    Please reply
    thanks

    Dear Vijay,
    Please kindly read the SAP note number 199886     Business area in tax line
    In the value-added tax line items, the field "Business area" is NEITHER
    automatically filled NOR can you enter a value manually.
    Postings to VAT accounts must be made WITHOUT business area. The reason
    for this is that the field "Business area" does NOT exist in the tax
    data. Therefore,the advance return for tax on sales/purchases can also
    only generate postings WITHOUT business area and these postings must
    correspond exactly to the original tax postings in your account
    assignments. Otherwise, the tax accounts would have steadily increasing
    business area balances.
    Unfortunately I must inform you that the business area is not available
    for substitution because it can cause inconsistences in AM,CO and MM
    modules.
    Substituting the B.A.field is a modification to the standard SAP
    system. To make the business area field substitutable you must have
    written an ABAP to update table GB01 for the GSBER field, this is
    all explained in SAP note 42615.
    I hope this helps.
    Mauri

  • Business Rule error: Accounts are not available in the rule table

    Hi everybody,
    I have a problem running the Business Rule for the profit/loss copy to the equity account.
    The Business Rule I set reads from all P&L accounts, P&L specific flow, acual category, all datasources and then it writes everything keeping the source settings apart from the account destination (the equity profit/loss account) and the flow destination (I write in two different flows, so the rule is made up of two equal lines differing only in the flow destination). "PROFIT" is the ID I chose.
    Then I created the related script logic (ID=CALCACCOUNT):
    *RUN_PROGRAM CALC_ACCOUNT
    CATEGORY_M = %CATEGORY_M_SET%
    CURRENCYLABEL = %CURRENCYLABEL_SET%
    TID_RA = %TIME_SET%
    CALC=PROFIT
    *ENDRUN_PROGRAM
    Finally, the prompt ( process chain: CPMB/RUNCALCACCOUNT):
    PROMPT(SELECTINPUT,,,,"CATEGORY_M,CURRENCYLABEL,TIME")
    TASK(/CPMB/RUNCALCACCOUNT_LOGIC,SUSER,%USER%)
    TASK(/CPMB/RUNCALCACCOUNT_LOGIC,SAPPSET,%APPSET%)
    TASK(/CPMB/RUNCALCACCOUNT_LOGIC,SAPP,%APP%)
    TASK(/CPMB/RUNCALCACCOUNT_LOGIC,SELECTION,%SELECTION%)
    TASK(/CPMB/RUNCALCACCOUNT_LOGIC,LOGICFILENAME,CALCACCOUNT.LGF)
    But anytime I run the package it fails giving me the message error: "Accounts are not available in the rule table".
    I tried every possible change but nothing; if someone could help me somehow I'd be really grateful!!
    Thanks
    Filippo

    Hi James,
    Thanks for your quick response. There is no currency dimension in the application... I've tested with the correct businessrule as CALC value, but this didn't do the trick.
    Any other suggestions?
    Regards,
    Vincent

  • Business area not appearing against VAT entry in Accounting doc for Invoice

    Dear All,
    We have configured Business areas,
    When we post an invoice with multiple line items and open the Accounting document for this invoice we find that Business area is visible against Freight Amount and the ,Sales  A/c but that no business area is appearing against the Vat payable amount in the accounting doc.
    Why so?
    what should we do so that system determines the business area against the VAT Account also.
    Regards,
    Avinash Gyale

    This could be due to two reasons
    1)  If one invoice contains multiple business areas, only blank space will appear in accounting document.  To avoid this, invoice split should happen based on business area.  Invoice split can be done through VOFM data transfer - billing document.
    2)  If a particular G/L Account is assigned in multiple Business Areas, this problem will come and you need to apply Substitution Exit RGGBS000
    thanks
    G. Lakshmipathi

  • MIRO - Business Area not getting updated in Vendor Line item

    Hello friends,
    I am posting Vendor invoice in MIRO transaction.
    After Posting if i see the financial document generated,
    Business area has not got updated in Vendor Line item.
    What could be the problem ?
    Please help me out.
    Hari Prasath

    Hi Kale,
    Make sure the field Business area is not supressed in tx. OB14. for the GL account in line item 001.
    On the other hand, have a look to the note and kba below:
    41294 - Business area in customer/vendor item
    Kba 1727802 - Business area not getting populated in sales/ purchase tax

  • Business area not appearing in Accounting document of 543's materail doc

    Hello ,
    We have created new plant CN06 (and assigend to Company code CN06) by copying existing plant CN03 (assigned to Company code CN03). Business area CN06 was defined and assigned to plant CN06 and valuation area. When we do normal GR document business area appears in material document but when we are doing GR for sub contracting (posting key 81) with movement type 543 Business area doesnt appear in the material doc .
    In cancellation of Subcontracting material document for plant CN06(Movement type 544) Business area appears properly . We are unable to analyse the issue.
    We have checked field status through RM07CUFA program , there wn't be any mismatch.  Please required your help.
    Regards
    Mahesh Naik

    Hello ,
    We have checked
    please check the for the sales area have u assigned rule (2 or 1) or not in t-code OVF2.----- Rule assigned is -1
    please check business area is assigned to plant & division in t-code OVF0----correct assignment is there
    please check assignment of business area to sales area OVF1.--correct assignment is there .
    Still we are facing problem.
    Regards
    Mahesh Naik

  • Business Area not coming in FS10N layout.

    Dear SAP Friends,
    I am working in a client where "Document Splitting" was activated on the basis of "Business Area" from the 1st August,2008. In this client their is four business areas. When I am getting the balance sheet as per Business Area in F.01 every GL shown the amount as per business area & also a some of amount is shown under the not assigned head. Amount under the not assigned is total of document of having no business area.
    Now my client wants that all not assigned amount should be distributed as per the business area & not assigned amount will come to zero.The field of business area is "GSBER".
    Now for that I am testing it on development. I have selected on document having no business area and updated the table "BSEG" for filed "GSBER" for that business area manually through ABAP. When I am seeing the same  document under FB03 the system shows the Business Area correctly which I have given in the table. But when I see the General Ledger balance in FS10N (In layout selected business area column) the same document does not give business area in that business area column. But when I select it for details it shown the business area in that document.
    Now my issue is why this is happening ? or is their any another way to do this ?
    Because i have to update all of documents of before 1st, August 2008 with no business area .
    Please give any solution ASAP & for helpful answer points will be surely awarded.
    Thanks & Regards in advance  
    Sandeep
    Edited by: Sandeep on Dec 6, 2008 11:34 AM

    Hi,
    Touching a cluster table like BSEG thru ABAP is a tricky thing.  You would need to work out all linkages to other tables for the data you are touching, would suggest a where used for field business area and update all other tables relevant to the data, like BSI* and BSA*.
    For FS10N, the data is not read from BSEG but rather from the totals tables like GLT0.
    Cheers

  • Business Area not showing during MIGO line item process

    Hi,
    We are doing the MIGO process w.r.t. PO....there in Line item...Business Area not showing in its Field.
    If we create another MIGO document with other PO, BA is showing...
    What should be the issue...

    Hi,
    is this an account assigned PO ? Please check the PO document for the acct asst Tab .
    whather the BA is populated .?
    Please reenter the detials of GL account and try again for the PO.Please check whather the co object is properly assigned or not ?
    Regards,

  • Why lables are not possible in smartforms.

    In script Lables are possible but in smartforms lables are not possible .
    why lables are not possible in smartforms?

    HI,
    Refer to the wiki in the link.
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/abap/label%2bprinting%2bin%2bsmartforms
    Regards
    Sumit Agarwal

  • Document is being distributed - changes are not possible

    Dear Guru's
    I have an issue when making a quotation transaction. After i saved the quotation transaction, i would like to change the window into edit mode.
    So i have to click the display or change button and then after i click that button, there is an message text   "<b>Document is being distributed - changes are not possible</b>" but after i wait for some minute, system still can not be change. and still appearing a message text "Document is being distributed - changes are not possible"
    Please could u give some information about this issue?

    The order in the CRM system remains in status 'to be distributed'
    because it waits for an answer of the OLTP system that the order has
    been successfully saved.
    The reason could be due to the following:
    1. Check in your system the delta download is active ?  Did you perform
       an initial download of SALESDOCUMENTS ?
       If you check in transaction R3AC4 there must be an entry for
       SALESDOCUMENT to enable a successfull delta download.
       Without a successful initial download of this object, no delta
       download will be performed.  Please refer to the SETUP AND
       DOWNLOAD guide you will find in the service market place
       http://service.sap.com
    2. Check if there are any ABAP Dumps related in OLTP ?  If yes, status
       will always be in distributed as CRM is still waiting for a reply
       from OLTP.
    3. Check your inbound/outbound queues are working.
    The note 490932 will help you to check your dataexchange
    customizing.
    Please, reward points if it helps you.
    Regards, José Ignacio

  • Lightroom 5.6 Win8 64 import of some photos are not possible

    Lightroom 5.6 Win8 64 import of some photos are not possible: the photos are grey, the file name of the photos are already excisting in the catalog, older different photos, don’t Import Suspected Duplicates is not selected. There is no difference selected or not, the photos (Import are not possible) are always grey with the notice: These photos would be already imported! All other photos could be imported and gets grey.

    my-wedding-foto.de wrote:
    Lightroom 5.6 Win8 64 import of some photos are not possible: the photos are grey, the file name of the photos are already excisting in the catalog, older different photos, don’t Import Suspected Duplicates is not selected. There is no difference selected or not, the photos (Import are not possible) are always grey with the notice: These photos would be already imported! All other photos could be imported and gets grey.
    When Lightroom greys out a photo in the Import dialog box, it means the photo is already in the catalog. It doesn't mean that it is matched with an older photo with the same name ... in order for there to be a match, the file name and capture date and file size must be identical.
    So Lightroom thinks you have already imported the photos, and you think the photos have not been imported. Now I'm sure you are a very nice person, but I believe Lightroom. What you need to do is to find the photos in your Library Module and use them there. The photos can be found by searching for them by file name, after turning off all filters, and after clicking on All PHotographs in the Library Module.

  • Business area not capturing

    Dear Experts
    Business area not capturing for tax code while doing invoice verification.
    Can anyone helpme
    Regards
    Kumar

    Hi
    Use t-code F.5D and F.5E for business area adjustment, Or else consult you FI Consultant
    he Business area is never filled in automatic posting such as taxes or bank accounts. You have to customize the adjustment retroactively in the IMG. You will find it in "General  ledger Accounting -> Business Transactions -> Closing -> Regrouping ..." Once you have set all the accounts require, in functional you have to run all the Regroup transactions (General Ledger -> Periodic Processing -> Closing -> Regroup -> Balance Sheet Adjustment ...)
    This process ensures the zero balance per business area necessary for
    creating business area balance sheets.

  • Business area not relevant to plant

    Hi Gurues, I am getting error message when i going to create reservation error is coming 500060 Business area not relevant plant 3600. please help to solve it Best Rajeev

    Greetings Rajeev,
    Please always post the full message text including the message number with such questions.
    For starters, please check settings in:
    SPRO > Enterprise Structure > Assignment > Logistics - General > Assign Business Area to Plant/Valuation Area and Division
    See: Business Area and Plant

Maybe you are looking for