FICO-Invoice Parking and approval; Unable to complete some Config steps

FICO-Invoice Parking and approval; Unable to complete some Config steps
I am using standard WF: WS10000051 (SAP template) in Accounts payable to get triggered for Invoice Parking-Approval and Posting.
One of the steps mentioned at help.sap.com is below;
1. Data for Event Linkage
Object type     FIPP
Event     CREATED
Receiver type     WS10000051
Receiver module     SWW_WI_CREATE_VIA_EVENT
2. Check Function
Receiver type (function module)
Global     X
Enabled     X
I could get to 1. Data for Event Linkage which is T Code SWETYPV but could not find 2. Check Function.
Where do I set the parameters for : 2. Check Function in SAP
The help file link is
http://help.sap.com/saphelp_erp2005/helpdata/en/01/a9ceb5455711d182b40000e829fbfe/content.htm
Regards
Nilabh

You dont need to assign the Check function module.
Check function module is used to prevent the workflow from triggering if the checks written in the function fail.
For eg. check if the invoice amount is GT 500. If yes trigger workflow else dont.
-Kiran

Similar Messages

Workflow on invoice parking and posting

Hello,
Can anybody guide me how to configure the workflow for invoice parking and posting in detaills?
Thanks
Nilesh

hello ,
Prerequisites
In the Implementation Guide (IMG) for Logistics Invoice Verification, you can specify for which company code, which vendors, which invoices, and above which amount a document is subject to release. In an invoice document that is completed for posting, the amount that is subject to release is based on the gross amount. (Logistics Invoice Verification ® Document Parking ® Define Release Criteria)
Technical Implementation (MM-IV-LIV)
Object Types
Object technology is used to create the interface between the ERP functions and the Workflow system. The information given below is primarily of a technical nature and is not necessary for an initial overview.
Incoming invoice
Object type Bus2081 (Incoming invoice)
Workflow Template
The actual operational procedure is implemented as a workflow template. You will find this workflow template in your ERP system.
Workflow template: WS 20001004
Description: Release the Completed Log. IV Document
Triggering Event for Workflow Template
The event for workflow template IncomingInvoice.CompletedToRelease is triggered if the parked document is complete for posting (RBKP-RBSTAT='B') and is subject to release (RBKP-RFGKZ='X').
This coupling between the event and the workflow template to be started is deactivated in the standard system. If you want to use the workflow template, you have to activate it in Customizing for Logistics Invoice Verification.
User Roles
You complete parked invoices for posting and release them at the following organizational levels.
Processor Determination: Clerk Responsible for Releasing Invoices
If you have already maintained an organizational unit, you can use it here.
If no organization unit is available, create an organizational unit that includes the people responsible for releasing invoice documents that are complete for posting.
Use the organizational unit in Customizing for Logistics Invoice Verification in the activity for defining release criteria.
Processor Determination: Clerk Responsible for Completing Invoices for Posting
If you have already maintained an organizational unit, you can use it here.
If no organization unit is available, create an organizational unit that includes the people responsible for completing parked invoice documents for posting.
Link the organizational unit to the single-step task TS20000879:
· By simple processor assignment
All users in the organizational unit receive the work item.
· By defining an individual role
Only selected users in the organizational unit receive the work item.
Authorization Objects
You must have maintained the authorization to display invoices (activity 03, M_RECH_WRK) for users who are responsible for releasing invoices.
You must have maintained authorization to change parked invoice documents (activity 77, M_RECH_WRK) for users who are to complete parked invoice documents for posting.
Several other specific customizing steps are necessary for this workflow template in addition to the general customizing that is necessary to make sure that the workflow system functions properly.
Activating Event-Receiver Linkage
The event IncomingInvoice.CompletedToRelease (Invoice document completed for posting and subject to release) for object type BUS2081 (Incoming invoice) is an event that triggers workflow template WS 20001004 and is entered in the event linkage table as such as the standard event.
This coupling between the event and the workflow template to be started is deactivated in the standard system. If you want to use the workflow template, you activate the linkage between the triggering event and the workflow template as receiver of the event in Customizing for Logistics Invoice Verification. (Logistics Invoice Verification ® Document Parking ® Activate Workflow Template for Release for Posting.)
Use
The release of invoice documents that have been completed for posting is supported by a link to a workflow procedure.
Prerequisites
The event IncomingInvoice.CompletedToRelease must be triggered for an invoice (BUS2081) so that a release procedure is started. We recommend implementing this workflow together with the SAP workflow template WS20001003.
In Customizing for Logistics Invoice Verification, you maintain the activity Define Release Criteria under Document Parking.
Features
Release for Posting
In the release step, the person responsible for releasing the invoice document decides if it should be released. The system uses the virtual attribute ReleaseAgent for object type BUS2081 to determine the person responsible for releasing the document. The release criteria in Customizing for Logistics Invoice Verification are checked for this.
If the person responsible decides to release the document, it is first released in the background and then posted.
If he or she decided to reject the document, it is forwarded for further processing to the accounts payable clerk responsible for completing invoice documents for posting. The rejection reason should have been entered using the memo function.
Completing Invoices for Posting
The accounts payable receives a work item in his or her inbox. In this work item, he or she can read the reason why the invoice document was rejected and change it. If the accounts payable clerk parks the changed invoice document, saves it as complete, deletes it, or posts it, the workflow ends. It makes sense to save the invoice document as complete and therefore trigger the release workflow again, assuming that the invoice document is subject to release.
If the invoice document is parked, deleted, posted, or released in the background outside the workflow process, the workflow ends.
regards
venga

Invoice parking and posting

Hi all,
I want to know the functionality of Invoice Parking and Invoice Posting. Can anyone explain me this concept?
Also, what is the use of the BAPI_INCOMINGINVOICE_PARK and
BAPI_INCOMINGINVOICE_CREATE function modules
and what are all the inputs need to be passed to this FM in order to create invoice?
If the invoice document is created or parked, then which table field will differentiate the parking status and Posting status? And in which transaction i can see the invoice number created (parked/psoted) against the correspoding Purchase order and PO item number?
Regards,
Shanthi

Hi
Invoice which is still incomplete can be parked, then changes can be done to complete it. Finally completed document can be posted. You can use MIRO for these three functionalitites and also MIR7 for parking and completing the invoice document. Unless you post the the document complete accounting entries will not be generated.
You can check RBKP table with data element RBSTAT for knowing the status of invoice.
The use of BAPIs:
BAPI_INCOMINGINVOICE_PARK:
Park invoices with multiple account assignment
Change and park invoice account assignments
Park invoices for blanket purchase orders (see also the documentation for the function module BAPI_INCOMINGINVOICE_CREATE
Park invoices for purchase orders with planned delivery costs
Park invoices with unplanned delivery costs
Park subsequent credits and debits
Use document types with external number assignment
Park invoices with withholding tax
Park invoices with several creditor lines and different methods and terms of payment
Park invoices for purchase orders for external services
Park invoices with G/L account postings
Park invoices with material account postings
Park invoices for a one-time vendor
Park invoices with a different payee
Thanks

The server encountered an internal error and was unable to complete your request.

Hello
i am getting this error:
Server Error
The server encountered an internal error and was unable to
complete your request.
Could not connect to JRun Server.
the problem is that when i try to submit for email i am
getting this
the button is supposed to submit a email to ---->

Sometimes a quick trick to try is to do a <CFABORT> on
the first line of code..run it, nothing will happen, then take it
out.. and when you run it again you'll probably get the detailed
diagnostics that'll tell you what it's not happy about.
Otherwise...just progressively comment out code until it
starts working, and you've isolated where the issue is.

Last time I updated pages I lost features I liked and was unable to open some pages files. Now I see the features I liked are back but I have a lot more files to worry about. Will I be able to open files created in 5.2 if I upgrade to 5.5.3?

Last time I updated pages I lost features I liked and was unable to open some pages files. Now I see the features I liked are back but I have a lot more files to worry about. Will I be able to open files created in 5.2 if I upgrade to 5.5.3?

Within reason, Pages v5.2 documents are forwards compatible with Pages v5.5.3. Apple introduced the single file format document as a default with Pages v5.5.3 which is not backwards compatible with Pages v5 on Mavericks.
However, they also provided a File > Advanced > Change File Type > {Single File, Package} menu that allows you to change the current Pages v5.5.3 document into the backwards compatible Package type document. You would follow this transformation with a File > Save operation to complete it.

Payables AP invoice import and approval

Hi,
I am working on R12 Payables. I have a few doubts on AP Invoice approval.
I am importing invoices from external systems through the invoice interface tables AP_INVOICES_INTERFACE and AP_INVOICE_LINES_INTERFACE. Invoices from few sources have to to be created as approved invoices.
1) How can this be done? I don't see any field in the interface table that controls the invoice approval.
2) If approval workflow is NOT used, what will be the status of the imported invoices? Will all invoices be created with approved status?
3) If approval workflow is used, how can we import an invoice with Approval not required or Approved status?
Thanks,
Arun
note: duplicating this thread as the previous one is not marked as question.

1) How can this be done? I don't see any field in the interface table that controls the invoice approval.
Invoices cannot be created in approved status normally with import. You can try running the Invoice Approval Workflow after the Payables Import Process, however to automate the process.
2) If approval workflow is NOT used, what will be the status of the imported invoices? Will all invoices be created with approved status?
It depends on your setup. If you have setup like Requires Workflow approval then they will be imported in Approval Required status else in a Not Required status.
3) If approval workflow is used, how can we import an invoice with Approval not required or Approved status?
With workflow enabled your rules should be such that the invoices are automatically approved after the Invoice Approval Workflow is run. So none of the invoices should be going to someone for approval.
Hope it helps
Thanks

Installer enountered errors and was unable to complete the task.....

or something to that effect when attempting to upgrade Quicktime, since I am also unable to uninstall it from my computer. Errors are encountered there too. I can't open it, I can't uninstall it, and I can't upgrade it. HELP!!

Same problem, but with iTunes 8.
I was actually doing a remove and reinstall of iTunes to try to get my 3G iPhone to appear on iTunes when I wound up with this message "Installer encountered errors before itunes could be installed"
I'm on a supercharged Alienware Aurora using XP-Pro.
Here is how I fixed it:
-Removed iTunes and QuickTime through the 'Control Panel' "Add or Remove Programs'
-Shutdown my computer (the first time i tried this, i just did a restart, that didn't do it)
-Got some coffee (probably unrelated to fix
-Turned the computer on (promised her dinner and a chick flick, also probably unrelated to fix)
-Opened Safari (it works great on my PC) and went to http://www.apple.com/quicktime/download/
-Downloaded QuickTime 7.5.5 (option I Used was 'QuickTime 7.5.5 with iTunes
for Windows XP or Vista' (PROBABLY RELATED TO FIX, BEFORE TOTALLY REMOVING iTunes and
Quicktime, I HAD JUST BEEN DOWNLOADING iTunes 8 FROM THE MAC SITE, IT NEVER DID WORK
FOR ME)
+*- And... IT WORKS!!!!!!!!!!!!!!*+
I now have functional QuickTime 7.5.5 and iTunes 8
NOW I CAN GET BACK TO MY EARLIER PROBLEM, IT STILL WILL NOT RECOGNIZE MY iPhone.
All i get is "This iPhone cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install iTunes again."
NOT!!!!! Time to call for Tech Support.
Hope this helps...

Error message Internal Server Error - Read The server encountered an internal error or misconfiguration and was unable to complete your request. Reference

I am getting an error message when I attempt to update an app. What can I do?

Apple sites like App Store, iBook Store and iTunes Store are down temporarily.
Wait until those sites go online.
https://www.apple.com/support/systemstatus/

Apple TV and iTunes unable to complete purchase

Ever since updates to iOS8, Yosemite i keep getting "Account temporararly unavailable please try again later" on my Apple TV and frequently on my Mac. If I reset the Apple TV, router and reboot the computer then I can usually, that is usually, make a purchase on the computer. It is getting VERY frustrating as I get almost all of my TV through iTunes.
My account is in order and using my debit card.
Any suggestions to mitigate this issue?
Thanks

I would suspect that your AirPort Express (AX) is not properly extending the AirPort Extreme base station (AEBS). I would suspect that your Apple TV and iPhones are connected to the AX's wireless network while the laptop is connected to the AEBS's wireless network.
If you are going to use WDS, you must configure the AEBS to act as a WDS main base station. Then you must configure the AX to act as a WDS remote. The AX must be placed in a location where it can get a good quality RF signal from the AEBS.
The AX must be configured to use the same SSID (network name), channel and wireless encryption type/level/password as the AEBS.

I changed my payment info and am unable to make in app purchases

I changed my payment info in my apple id and was unable to complete in app purchases for pharohs way slots game. I then changed my payment info back to the original details, and am still unable to purchase credits for the app. How do I fix this problem? Pleeease help!

what does it tell you?
does it say the card is invalid?

Satellite direct unable to complete registration

I downloaded the software for Satelliteditect. And am unable to complete the registration process. What could be blocking this. I have fire wall disabled. I am running the latest software.

John..
If you have anti virus software installed, disable that.
And go to Safari > Preferences then select the Privacy tab.
Make sure cookies are not blocked.

Assertion failed? Tried trouble shooting and was unable to fix.

I tried to use the FAQs to fix the issue.
Error: 'assertion failed' | Update | Windows
I was unable to complete the last step and am still unsure as to what the problem is and how it can be fixed. I have tried contacting Adobe, and surprise surprise, they aren't available for customer support on the weekend. This is extremely frustrating because I have a customer waiting on photos I had been editing since yesterday. Can anyone help?

Are you connecting via wifi? If so, I suspect that there is some network interference.

How to release an invoice that is already parked and completed

Hi Experts,
We are writing a workflow method, where an invoice enters with status 'B' which is parked and completed in our syste.
We need to change teh status to 'E' which is released.
I tried following bapis but they dint work, can you advise please.
BAPI_INCOMINGINVOICE_RELEASE - Only for invoices with payment block, doesnt work for normal invoices.
MRM_INVOICE_PREPARE_AND_POST - this posts the invoice, we just want to release
MRM_INVOICE_RELEASE_UPDATE - Gives me an FI error.
thanks,

Hi
try something like:
PERFORM set_new_status(SAPLMR1M) USING    i_rbkpv-rbstat
                                  i_okcode
                         CHANGING f_rbstat_new.
Where i_rbkpv-rbstat = 'B'
and f_rbstat_new = 'E'
and i_okcode must not be empty (try with 'PB').
and then:
CALL FUNCTION 'MRM_INVOICE_PARK'
    EXPORTING
      i_rbkpv           = i_rbkpv
      i_xupda           = f_xupda
      i_simulation      = f_simulation
      i_rbstat_new      = f_rbstat_new
      ti_drseg          = ti_drseg[]
      ti_selbest        = ti_selbest[]
      ti_selfrbr        = ti_selfrbr[]
      ti_sellifs        = ti_sellifs[]
      ti_selwerk        = ti_selwerk[]
      ti_selerfb        = ti_selerfb[]
      i_editor          = editor
    IMPORTING
      e_belnr           = f_belnr
      e_gjahr           = f_gjahr
      e_only_parked     = f_only_parked
    EXCEPTIONS
      error_message     = 1
      user_exit         = 2
      update_impossible = 3
      OTHERS            = 4.
where f_xupda = 'U'
In a few words: try to replicate subroutine DOCUMENT_PARK
of include LMR1MF0D
(consider Srinivas advise before proceeding further)
Best regards.
Edited by: Pablo Casamayor on Oct 2, 2009 8:39 AM

Invoice Parking - 2 Level Approval Workflow not working

Hi,
I am having trouble making the two level approval work for invoice parking functionality. I have maintained Release Level = 2 and Sub w/f = WS10000053.
Rest I have configured as detailed in this link http://www.thesapconsultant.com/2008/09/simple-sap-workflow.html
When i test the above workflow from SWDD it is working fine. i.e., first one user gets the workitem and after he approves/rejects, it is going to second user. This proved that the user assignment i have maintained is correct.
But when I park the invoice (using "Save As Completed" button) using FV60, it only going to one user. After he/she approves/rejects it is not going anywhere. I checked in SWI1 transaction where no open tasks (error or hanged etc) are seen.
Can anyone please advise if i am missing anything?

Dear Rachit,
There is a dedicated forum for Workflow i.e. SAP Business Workflow
Post your thread there, you will get fast response.
I can suggest you one thing check the agent assignment is done or not
Regards,
Chandra

MRM_QUANTITY_CHECK for invoices parked as complete

Hi,
is it possible to call fm MRM_QUANTITY_CHECK for invoices parked as complete (RBKP-RBSTAT = 'B' and sy-ucomm = 'COMP')?
is it possible to have routine MENGE_PRUEFEN(SAPLMR1M) for invoices parked as complete?
These checks get triggered when posting the invoice.
i´d need to have these checks for invoices when they are parked as complete.
Best regards
Edited by: Pablo Casamayor on Apr 21, 2010 8:57 AM

Hi,
The purpose of using either the fm call or the subroutine is to avoid saving as complete an invoice if it hasn´t got goods receipts enough.
The standard triggers those checks when the invoices are posted but i´d need them when the invoices are saved as complete.
Best regards.
Edited by: Pablo Casamayor on Apr 26, 2010 8:30 AM

FICO-Invoice Parking and approval; Unable to complete some Config steps

Similar Messages

Maybe you are looking for