Field Account Determination value in Posting Parameter tabpage

Hi RE-Gurus,
I have a specific requirement.
In a given RE-FX Lease Out Contract, we enter Account Determination Value on the Posting parameters tab page which is responsible for determination of the G/L account which shall be posted at the time of carrying out Periodic Posting.
The requirement is that i want to control the change authorization for the same for specific set of users.
This means if i have 10 users who have Contract change authorization, only one of them shall have authorization to change the Account Determination Value on the Posting parameters tab page and rest 9 users shall not be allowed to change the Account Determination Value.
I hope i m clear in stating my requirement.
Plz revert back ASAP.
Thanks,
Pankaj

Hi,
please have a look at SAP note 1005831 which provides BAdI BADI_RECA_AUTH_CHECK for implementing customer specific authorization checks for real estate objects. The BADI provides also an example implementation for your reference.
Regards,
Franz

Similar Messages

  • Account Determination Error When Posting Goods Issue Against Sales Order

    Hello SAP Experts,
    We are currently experiencing a problem during goods issueance against sales order (VL02N). The system terminates the issueance and gives error:
    "Account XXXXXX requires an assignment to a CO object".
    We have tried maintaining the GL account in OKB9 and assign a default profit center there but i didn't work. The material master also contains the profit center. We were only able to post the transaction if we try to default the a cost center in FS00. However we dont want to assign a default cost center as cost centers differ by plant. We are wondering why it asks the cost center considering that it already contains the sales order assignment. We checked the field selection of the GL account, movement type and even the posting key and all showed that the cost center is not required. We are now in a dead end situation here. Please please help us.
    Thanks in advance!

    Dear,
    Message no. KI235?
    GO TO T-CODE FS00 AND EDIT COST ELEMENT AND THEN YOU ASSIGN COST CENTER
    Please check this link,
    [Account Determination |"Account 'xxxxxx' requires an assignment to a CO object"]
    Regards,
    R.Brahmankar

  • Account determination Error while posting to FI

    Dear gurus,
    At the time of billing there is an error "error in account determination table T030K" the posting is not happening to FI. I am using a manual condition for excise.
    I have checked in the OB40 settings. G/L account is assigned to that particular key and tax code.
    Please guide me as how to go ahead.
    Thanks & Regards
    Anand.k

    Hi,
    Check the following:
    1.  In the line item of SD, which is the Acct key is appearing.
    2.  In the same item, check the tax code.
    After getting the above input, Check table T030K for the combination whether GL Account is specified.
    You need to jointly take help of SD.
    Hope this helps.
    Harish

  • Error in account determination while billing posting which includes rebate

    Dear All,
    Everytime I try to post my billing document which includes rebate, I get "error in account determination" message. Can anybody help me how do I rectify this error. I have checked all the following points:
    1. Activated the Rebate at Customer Master Data
    2. Activated the Rebate at Sales Organization Level (IMG)
    3. Activated the Rebate at BillingLevel (IMG)
    4. And finally have created a condition for rebate (VBO1)
    Looking forward for your early response.
    Best,
    Vivek.

    hi
    if u r getting error by using rebate
    pls go through this way
    pls find the account key for rebate in pricing procedure and pls check in t.code vkoa whether they are assined gl account or not for that particular account key
    eg: account keys erl -revenues etc....
    Thanks & Regards
    phaneendra

  • Error in Account determination , Message no VR012

    Dear Experts
    help me in solving this issue
    In vfx3 when iam releasing the billing document to accounting it giving error " Error in Account determination", if i double click on that error, it giving message VR012,
    Thanks in Advance
    Thanks & regards
    Chand

    Please check your VKOA settings .
    Please check account keys are properly maintained with sales area,Account Assginment groups(customer,material) and condtions.
    Symptom
    The revenue account determination during billing does not determine the correct account although all Customizing settings were checked and are correct.
    The account assignment analysis on the detail screen displays the information:
    VE120 "G/L account xxx determined from Account determination type kkk",
    VE215 "G/L account in document: yyy"
    The two specified G/L accounts xxx and yyy differ from each other, especially the G/L account yyy in the document is incorrect, however the G/L account xxx determined from account determination type kkk is correct.
    The problem occurs when fields of the billing header (for example, billing type, field VBRK-FKART) are used as criterion for the revenue account determination and are billed in collective processing.
    The error does not occur if billing is restricted to one document.
    check notes:
    Note 172692 - Error in the revenue account determination
    Note 212909 - Posting status B (account assignment error) not set

  • Error in :Posting keys for account determination

    Hi, Gurus,
          please suggest the solution for the following problem.
                we are selling two  types of materials, one is the  product material and the second one is the scrap material.Different type pricing procedures, sale order,delivery and billing types were configured for the same. For CST and VAT   same condition type  :"ZCST - for CST " and  ZVAT - for VAT" were used in both pricing procedure and the standard account keys : MW1 for ZCST and MWS for ZVAT  and  same G/L accounts configured .
    .                                                   key combination for the condition types as mentioned below:
    .                                                        ZCST:  Country/PlntRegion/Region/TaxCl2Cust/TaxCl.2Mat
                                                             ZVAT: Country/PlntRegion/Region/TaxCl1Cust/TaxCl.Mat
         Now we want to capture  CST and VAT seperately for both the materails.For that two new account keys created and incorporated the same in scrap pricing procedure and  and new  G/Ls created and assigned .Now the system is throwing  following error while while releasing the billing document to accounting document.
    Posting keys for account determination for transaction Z48 do not exist
    Message no. F5598
    here Z48 is the new accounting key created for  the  CST tax.We tried all the possibilities, but system is throwing the same error.
    with regards
    sam

    Thank u for ur response.Now it is solved when OB40 and OBCN maintained.Here I am facing a new problem.pl. provide the solution.we configured twoseperate  pricing procedures for our product and scrap material.We have configured same condition types for VAT(ie.condition type:ZVAT) and CST(cond type:ZCST), in both pricing procedures. Now We want to maintain  seperate condition types for VAT and CST for pricing procedure for Product material and Scrap material. I have created two new condition types for scrap sales ZSCT- cst for scrap and ZSVT-vat for scrap by copying the same from existing conditions ZCST & ZVAT, and the same is included in the scrap pricing procedure. And also maintained OB40,OBCN,OVK1,OVK3,OVK4, FTXP,FV11 and VK11.
    now I am facing the following problems.
    1. while creating the Material master & customer master, in tax category sub screen all conditions i.e. conditions defined for  product material( ZCST,ZVAT) and defined for scrap material (ZSCT, ZSVT) displaying and these are compulsory fields.
    2. While creating the sale order for scrap material, system is considering the TAX classes from ZVAT/ ZCST (defined for product material) and taking the condition value from the condition type ZSVT/ ZSCT with the TAX class values of  ZVAT/ZCST.
    Now I would like to know is there any procedure  to assign the Material type and Customer group to Tax category.
    Thanks & Regards
    sam

  • Passing a value to a Parameter Field From a VB Form

    Post Author: as1971
    CA Forum: General
    Hello everyone
    I'm using Visual Basic 6.0 and Crystal Report 9.0
    I built a report using Crystal Report and named it Player_Statement.rpt. I then included it to my VB project and named it Player_Statement.Dsr
    In this report I have a Parameter Field called P_Player_ID which I'm using in Record Selection Formula.
    I'm using the following code to pass a value to the parameter:
    Dim Report As CRAXDRT.ReportSet Report = New Player_StatementReport.ParameterFields.GetItemByName("P_Player_ID").AddCurrentValue CLng(cmbPlayerNB.BoundText)
    When I execute the application I get the error message "The value or range you are adding has already existed" at the last line of code (Where I'm assigning the parameter a value)
    Could anybody help me please

    Post Author: VinoTinto
    CA Forum: General
    Dim Report As CRAXDRT.ReportSet Report = New Player_StatementReport.GetItemByName("P_Player_ID").ClearCurrentValueAndRange                                               Report.ParameterFields.GetItemByName("P_Player_ID").AddCurrentValue = CLng(cmbPlayerNB.Boundtext)

  • SO number in reference field in accounting doc after GI posting

    Hello,
    In the header of accounting document, which is being created after posting goods issue, in the "Reference doc." field delivery number is displayed.
    Is it possible to have in this field sales order number?? If so, where can I change this set up?
    Regards,
    Sylwia

    Hi Sylwia,
    This goes to the same explanation I gave you in previuos inquiry. Talk with you Sales & Distribution folks or go to the set up of copy control strategy that drives transfer of information "Copying control: Delivery document to billing document" (Tcode: VTFL). Select the right combination Billing/Delivery and change the header reference field to capture the sales order number. Again when the financial document is released to accounting the value would be transferred.
    Hope this helps.
    Thanks,
    GG

  • Access Sequence Field not recognized in the Account Determination

    Hi All,
    we have created a new table for the account determination access sequence we are using as default.
    the new table contains the field MVGR2 (VBAP) which we added to the KOMPCV structure as ZZMVGR2.
    this goes fine in the sales order, however this is no longer recognized during billing. the field has no value in the Account determination analysis, hence there is no GL account determined for that.
    can anyone help?

    My guess is: you will have to modify the copy control routine, and populate the value of the new field accordingly.
    This routine needs to be assigned to the item category in copy control configuration (VTFL).
    Needless to say, the existing routine should be copied and then modified.
    Regards,
    Aroop

  • Posting keys for account determination for transaction EXD do not exist

    hi
    i am doing Sales order for 1 month,no error i have got
    but now i am getting error
    Posting keys for account determination for transaction EXD do not exist
    HELP

    Hello,
    I have following suggestion to overcome this issue.
    1. In the t-code "FTXP", check for assignment of the G/L account for the posting key.
    2. Check out the SAP Note:200348.
    3. In t-code "OBCN",for the account key EXD, make sure that the value of posting indicator is 2.
    4. In t-code OBYZ, for the tax calculation procedures, change the key to EXD. The account keys in tax pricing procedures and SD pricing procedures Should be same.
    Regards,
    Sarthak

  • How to get the selection parameter values to Posting logic method

    How can i  read the selection parameter values at " posting logic" method, which are given in  " Select Option function module"?

    max bianchi wrote:
    Hi
    >
    > The selection-screen data are stored in ABAP memory, so it need to clear it .
    >
    > Now how set ID parameter can depend on SAP release, anyway in ECC 6 this should work:
    >
    >
    INITIALIZATION.
    >   DATA: BEGIN OF MEMKEY,
    >           REPORT  TYPE SY-REPID VALUE SY-REPID,
    >           VARIANT TYPE RSVAR-VARIANT,
    >           INT_MODE(2) TYPE N,
    >           KIND(1)     TYPE C,
    >         END OF MEMKEY.
    >
    >   SYSTEM-CALL INTERNAL MODE INTO MEMKEY-INT_MODE.
    >   FREE MEMORY ID MEMKEY.
    >
    > But in this way it'll clea whole selection-screen...do you wnat do it?
    >
    > Max
    @Max : The above hack seem to work fine unless you assign a  'DEFAULT' value to the selection fields.
    @OP   : Here is an other work around,  however, this approach needs an additional effort to create
        new PF-STATUS('MYLIST') and assign a function code of your choice to the function keys in the standard toolbar and handle them in the 'AT USER-COMMAND'   event as shown below. Let us know if you have/find any issues with this.
    PARAMETERS:
      p_test TYPE char5 DEFAULT '123'.
    AT USER-COMMAND.
      CASE syst-ucomm.
        WHEN 'MBACK'.
          SUBMIT zytest WITH p_test = '' VIA SELECTION-SCREEN.
      ENDCASE.
    START-OF-SELECTION.
      SET PF-STATUS 'MYLIST'.
    -Rajesh.

  • Movement Types and value string in account determination.

    Hi Team,
    In the account determination how and where the movement types and value string are assigned to each other.
    Thanks,
    Sanjay

    hi
    Value Strings
    Posting records are assigned to each relevant movement type in Inventory Management and to each transaction in Invoice Verification.
    Value Strings indicates the posting rule that always contains the same account assignment characteristics for a certain transaction or event (for example a goods movement or an invoice receipt).
    Each goods movement is assigned to a Value String and each Value String in turn is assigned to Transaction/ Event keys. These settings are pre-defined and can not be changed.
    You can see the linking of Value Strings in the following tables:
    T156S- Movement Type: Quantity/ Value Posting (For movement type--> Value String)
    T156W- Posting String Values (For Value String--> Transaction/ Event key)
    I had found the following Value Strings in the system: WA01, WA03, WA04, WA06, WE01, WE06 and WF01.

  • KEFC - How value fields are determined ?

    Hi Experts,
    We just upload a file through transaction KEFC & it does automatic COPA postings . We want to understand how value fields & other relevant items in COPA posting are determined when we post through this transaction.
    We went through KEFA & KEFB configurations but could not determine how values in text file are assigned to COPA Value fields.
    Regards,
    Santosh

    Hi,
    Let me try to answer your query since it is still unanswered.
    From the upload file, COPA revenue and other sales value into the value fields.
    If you have selected button for Valuation in KEFC screen, you will get all the cost components values of the cost estimate in the mapped value fields. This configuration is carried out
    IMG -> Controlling -> Profitability Analysis -> Master Data -> Valuation -> Valuation using Material Cost Estimate.
    Here you can select the point of valuation, for which material type and mapping of cost components to the value fields. I hope that I have answered your query. Let me know if not.
    Cheers and Thanks in advance.

  • Crystal Report XI: Parameter Field Dynamic Default Values Limitation?

    Post Author: Elie_123
    CA Forum: General
    Hi,Using Crystal Report XI.I have a parameter field with Dynamic values that Queries the company field of an SQL Database.I have around 3500 companies in my DB. But when running my report (Using Crystal), only the first 1300 companies are being displayed in my pick list.I need to see the whole 3500 records. Any idea how to fix that?regards

    Post Author: V361
    CA Forum: General
    Check out this link
    http://technicalsupport.businessobjects.com/KanisaSupportSite/search.do;jsessionid=2DA9FC849962062053477D134AAAA672?cmd=displayKC&docType=kc&externalId=c2017238&sliceId=&dialogID=5618074&stateId=1%200%205616180

  • Account determination error in Invoice document posting

    Problem - When generating the invoice document to customer, an error is displayed - Document is saved (Account determination error). As a consequence of this step, the invoicing is not able to create FI document
    My Analysis-
    Account determination is done in G/L account assignment (VKOA screen)
    For my billing document, the system is not able to find the GL account (below are screenshots)
    In VKOA screen, I already defined the GL account determination using KOFI procedure.
    I initially defined in table 2 Cust.Grp/Account Key and it didnt work.
    So I defined in both the tables 1 as well - Cust.Grp/MaterialGrp/AcctKey
    But still system is not reading the tables and obtaining the GL account no
    Any advice on why its not working?

    Hi Nikhil,
    As per the screen shots i could observe that you didn't maintained acct asst grp of customer.
    check the acct asst grp of customer field in billing tab is maintained or not.
    other possible reason may be in your pricing procedure -check whether the accounting keys are maintained or not.
    This could solve your issue.

Maybe you are looking for