Field headings display in clasical report

Hi ABAPERS
iam working on clasical report. in that i have to display 16 field headings.
when executing the report, the column headers should be frozen at the top so that when the user is scrolling down, they can see what the column title is.
how can i over come this problem.

Put your colum headers in TOP-OF-PAGE Event.
This should give you your desired result.

Similar Messages

Need to remove space for a field when displayed in ALV Report

Hi,
I have material field of length 18, but the content is only 10 char. I need to remove the extra space when it is displayed on ALV Report.
Is there any option in ALV field catalogue

use statement condense.
condense zmatnr.
also giv output lenth of alv column as 10.

Clasical Report column headings display

Hi ABAPERS
iam working on clasical report. in that i have to display 16 field headings.
when executing the report, the column headers should be frozen at the top so that when the user is scrolling down, they can see what the column title is.
how can i over come this problem.

Hi,
you mean the column headings should be displayed even though
the user scrolls down the output.
For classical reports, according to me it is not possible.
We will be using the write statement to display the records,
so it is static for the report.
If you want the output what you are expecting then go for ALV's.
Regards,
Venkatesh

F4 for field in clasical report

Hi abapers i have one clasical report in that selection screen field crhd-arbpl(work center) d't have serch help.
i wrote a program for it in that i used 'F4IF_INT_TABLE_VALUE_REQUEST' function module.
but it is displaying output directly.
when i press f4 it should be display first selection screen in popup window
Note:s run transaction CR06 and press f4 in WORK CENTER
I want same result in my program.
and i wnat to display display four fields in box not in selection screen.

Hi Keshava,
You can create search help for this in the event AT SELECTION SCREEN ON VALUE REQUEST FOR S_NAME1-low.
Use the function module F4IF_INT_TABLE_VALUE_REQUEST for this.
Check this sample code...
data: begin of itab occurs 0,
         name like kunnr-name1,
         end of itab.
refresh: itab.
AT SELECTION SCREEN ON VALUE REQUEST FOR S_NAME1.
<write select query to fill this internal tabel with required data or append this internal table with req: entries>
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
    exporting
    DDIC_STRUCTURE         = 'ZSPECIALTY_DESC'
      retfield               = 'S_NAME1'
    PVALKEY                = ' '
      dynpprog               = sy-repid
      dynpnr                 = sy-dynnr
      dynprofield            = 'CCODE'
    STEPL                  = 0
    window_title           = 'Specialties'
    VALUE                  = ' '
      value_org              = 'S'
    MULTIPLE_CHOICE        = ' '
    display                = 'F'
    CALLBACK_PROGRAM       = ' '
    CALLBACK_FORM          = ' '
    MARK_TAB               =
    IMPORTING
    USER_RESET             =
    tables
      value_tab              = itab_ccode[]
    FIELD_TAB              = fieldtab[]
    return_tab             = ret_tab
    DYNPFLD_MAPPING        =
   exceptions
     parameter_error        = 1
     no_values_found        = 2
     others                 = 3
if sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
          WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call this FM in subroutine and call that subroutine for S_NAME1-HIGH in the same event, to get search help for both lower and upper limits
Thanks
Sudharshan

Regarding Selection Screen field making display field in ALV report

Hi All,
In ALV Report, at runtime how can i make the field as Display Field in selection screen .
Thks & Regds
Shailesh

hii,
Go to se38 and give the below progra name execute.... check the source code it is very easy to understand.
1.demo_dynpro_modify_simple
2.demo_dynpro_modify_screen
if tou are using grid,u can refer to foll link
sequencing / choosing fields in report screen at runtime,
Display the Columns in the grid at run time
rgrds,
Shweta

Custom field's text not getting displayed in standard report

Hi All,
I have a requirement like this .
There is a Custom field which we have added in a standard FICO report ie S_PL0_86000030 ( G/L Account - Balances ).
The custom field is added through a report painter , while seeing the config of report painter the custom field is showing the selection text , but when we run this transaction S_PL0_86000030 , the technical name of that field appears in the selection screen .
For example if the field is ' matnr' then we give the text as 'Material Number' . Then in the screen this field is getting displayed as Matnr instead of Material Number.
Please suggest me on this.
Thanks,
Sumit

In transaction GRR2
Insert->
selection parameters ->
take the variable type as >Tesxt varaible for selection parameter
chosse >material no.
hope ths helps
Bhanu

Display Image on report through Field Definitions Only File.

Hi all,
I have a report where I work with Field Definitions Only files (ttx).
These files are mapped to classes in code behind (csharp).
In code behind I make lists of these classes. Each list is set as the datasource of a subreport.
This works great!
My new goal:
Now I tried adding a picture to my report.
In the TTX file I added a BLOB field.
In the code-behind class I added a System.Drawing.Image.
My actual problem:
The class gets filled with the image, but the image is NOT displayed on the report
Does anyone know why this is happening?
How can I fix this? (should I use another Type in my class for the picture?) (should I format the picture in the report? ....)
Kind regards,
Wim

Hi AG,
Thanks for your response.
This is my TTX field:
Signature BLOB
I can't see the image in the report because I create the image in code-behind.
I think the problem doesn't occur in CrystalReports but in the conversion from my StrokeCollection (I use an InkCanvas [WPF] to capture a signature) to a ByteArray.
I am already one step closer to the solution. You can't just assign an object of type Image to the BLOB field of the report but it has to be a Byte-Array.
The problem I am facing now is that the picture is black after a conversion. (I see this when I export to disk and open the file in MSPaint).
The good thing is that CR shows me a black image so I guess CR is doing its job!
Kind regards,
Wim

Hierachichal display is not coming for field in cross tab crystal report

Hi,
I have a dimension "Cost center" in DSO on which Hierarchy is defined in SAP BI.
When I developed one cross tab report on this DSO, values for Cost Center fields are displayed in flat mode and not in Hierarchical mode.
I also set group option on this "Cost center" field in report And in Report menu "Hierarchical Grouping option" also check box ticked for "Sort data hierarchically" and also selected Instance id field.
how to get this?
**Note: same problem when report is developed on Infocube.*+
Please help me.
Thanks,
Dhana.

Hi Dhana,
I've created a similar report to show matrix WBS x RBS, and WBS are grouped hierarchically.
My report developed in this way:
- I've created Hierarchical group located in detail section of report. In detail section I've put the row field of cross table.
- I've suppress all this section: group header, group footer and detail
- I've created the cross table in Report Footer
The report show correctly
Regards
Sandro

Some report fields not displaying when users view reports in a Citrix

Hi All, got a weird one.
We have an app developed in MS Visual Studio 2007 that utilizes .NET crystal reports. Our users access these reports through citrix. Most of teh time, most people can view these reports correctly. SOME of the time, however, certain fields will disappear. The report still runs the same (grouping, ordering, etc) but key information is missing.
After re deploying the reports and / or clearing the user's roaming profile then everything is good for a while, so I know it has something to do with a temp or cached version of the report. is there a way to set .net crystal reports to NOT cache AKA create new every time?
Any assistance would be greatly appreciated!
JOhn.

Hi John,
Yes and Yes.... 14 years...
Multiple Commands and multiple data sources without being linked can cause problems if you also use SQL Expressions. If you try to add more than one data source in the Designer you'll get a pop up warning about server side grouping and SQLExpressions can not be used.
But I don't think this would be the cause. May be a result of the option logically internal to CR but I don't think the data source would be the issue, again you said the info is there just not displayed.
Do they have access to run your app without going through Citrix? Possibly running your app using Remote Desktop. Could rule out if it's a CR issue. I think this may be a GDIPlus problem, it is the dll that renders the page and could be dropping the objects. I know MS has been patching it lately to plug security holes....
One option, if they can, is to use [Modules |https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip], get then to run it when the reports are working and then again when they are not and see if there are any dll differences...
I have heard of a few other cases with Citrix and I believe it was narrowed down to being a Citrix problem and that was as far as we could take it....
Process Monitor may help but if it's random it's a lot of info to go through to determine the cause.
Maybe logging a case with Citrix might help also....
Thanks again
Don

How to display multi line headings in procedural alv report

Hi experts,
How to display multi line heading in alv( procedural alv report) report.
some columns single line and some columns multi line in the same report.
ex:
solvent consumed solvent recovered
fresh | recovery recovery | spent batch no storage
I am using procedural alv .pls give me idea.

Hi Ram,
Check the sample report [how to display multi line headings in procedural alv report|http://sample-code-abap.blogspot.com/2008/01/printing-multiple-line-header-and.html]
Thanks,
Duy

Cascade LOV display as text (based on LOV) in clasic report

Hi Experts,
It is possible to use cascade LOV - item is displayed as text (based on LOV) in clasic report ? (Display AS)
I would like to reference to another column displayed in the report in LOV.
Example:
select description d,
       val_strg2 r
from domain_cntr
where cntr_name = 'CH_PRIM_ST_NOTE'
   and val_strg1   = #PRIM_STATUS#
   and active_idc = 'Y'#PRIM_STATUS# is the column i would like to reference.
Is it possible ? IN CLASIC REPORT
regards
J :D

Hi,
>
Is it possible ? IN CLASIC REPORT
>
Yes.
It may a rather long thing to code, so be ready for it.
Here is how:
a. Use APEX_ITEM API in your Report Query. Make sure you specify the p_item_id parameter , using #ROWNUM#
b. In the Parent LoV wrtie an onChange event trigger that fires a JavaScript function and pass the ID of the element .
c. In this JavaScript function make an AJAX call to get the <select>...<option...>...</select> , in short the complete HTML of the child LoV
d. Push this HTML fragment into the Child Lov. You construct the ID of the target based on the ID of parent . E.g. f01_0001 to f02_0001.
e. You may additional keep the child invisible or disabled initially, and then make it visible/enable it after it is populated.
Regards,

More than one Row Field headings in ALV

Hello Everyone,
         i have one requirement wher i need to give more than one row of field heading. one main heading and sub field headings. Following is structure which will give an idea.
Current PIR Quantities|   -> Main heading
Qty1|Date1Qty2|Date2|   -> Sub headings
       |       |        |        |   -> report values will come here
       |       |        |        |   ->     -
do----
Can you please let me know how can we get this lay out in field catalogue for field headings??
Thanks in Advance
Siva
Message was edited by:
        Siva Velama

Hi Atish,
        Thanks for your reply. i dont have data in two levels for Hierarchial-sequential ALV. Data is just one row. But field headings(fieldcatalogue in alv) will have two rows. That means one row of main headings and second row with detailed fields. One main heading may have more than one subheading. ultimately we display values for Subheading fields.
hope you have understood the requirement.
Thanks
Siva

Udf Data is not being displayed in the report

Hi all,
i have designed one report in which i am displaying some udf fields along with other system fields.
i have not used any selection criteria.
when i run report it doesn't display udf data of some random rows in the report even if data is peresent in that udf field.
If i open sales order and press 'Shift-F2' and update the document and now if i run report then i get that udf value in the report.
why this happening. data is there in the udf field only its not displayed in the report with out updating the that udf.
pls suggest some solution.
regsrds,
Chetan.

Hi Ashish,
I ran the "ZPS/!ZPS" in RSRT where ZPS is the infoset name. In Dev, it displayed the values. In QA, it displayed the below messages:
ECharacteristic 0TCAKYFNM does not exist. Check authorizations
WThere are calculated elements. These results are bracketed [ ]
and below that, it displayed the values for Number of records. But, it has not displayed the values for the other figures.
Does this has any impact in QA.
Thanks & Regards,
AVN Rao.

Icon display in alv report

Hi all,
       I have a problem in alv report ,there are 5 fields to display and in 6th position i have to display an icon as red or green light according to data. How can i do that ? please help me .
Thanks and regards
Goutam

Hi goutam,
1. Simple
2. we have to use the layout for this purpose.
3. like this :
alvly-lights_fieldname = 'LT'.
alvly-lights_tabname = 'ITAB'.
4. Just copy paste to get a taste of it.
(important code has been highlighted)
REPORT abc.
TYPE-POOLS : slis.
DATA : alvly TYPE slis_layout_alv.
DATA : alvfc TYPE slis_t_fieldcat_alv.
DATA : BEGIN OF itab OCCURS 0,
<b>       lt TYPE i,</b>
       matnr LIKE mara-matnr,
       END OF itab.
END-OF-SELECTION.
<b> itab-lt = 1.
APPEND itab.
itab-lt = 2.
APPEND itab.
itab-lt = 3.
APPEND itab.
itab-lt = 1.
APPEND itab.
itab-lt = 3.
APPEND itab.
itab-lt = 3.
APPEND itab.
itab-lt = 3.
APPEND itab.</b>
<b> alvly-lights_fieldname = 'LT'.
alvly-lights_tabname = 'ITAB'.</b>
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
    EXPORTING
      i_program_name     = sy-repid
      i_internal_tabname = 'ITAB'
      i_inclname         = sy-repid
    CHANGING
      ct_fieldcat        = alvfc.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program = sy-repid
      it_fieldcat        = alvfc
      is_layout          = alvly
      i_save             = 'A'
    TABLES
      t_outtab           = itab.
regards,
amit m.

How can we split the grid display in alv reports.

hi everyone.i am trying to get the display of two reports in a single one using split screens.i had written a report for vendor balance.one for open and one for cleared items.how can i combine these two reports.
the field catalog was same for these two.
can anyone suggest me suitable way to perform.

HI,
You can also try ALV Blocked display.
Pls Check following program
BCALV_TEST_BLOCK_LIST.
FM used are
call function 'REUSE_ALV_BLOCK_LIST_INIT'
exporting
i_callback_program = sy-repid.
call function 'REUSE_ALV_BLOCK_LIST_APPEND'
exporting
is_layout = it_layout
it_fieldcat = fc
i_tabname = 'IT_VBRK1'
it_events = it_event
tables
t_outtab = it_vbrk1.
call function 'REUSE_ALV_BLOCK_LIST_APPEND'
exporting
is_layout = it_layout
it_fieldcat = fc1
i_tabname = 'IT_VBRK2'
it_events = it_event
tables
t_outtab = it_vbrk2.
call function 'REUSE_ALV_BLOCK_LIST_DISPLAY'.
form top_of_page1.
format color col_positive.
write: / 'FIRST BLOCK'.
endform.

Field headings display in clasical report

Similar Messages

Maybe you are looking for