Field in KNA1 not mantained

Hi gurus,
I have a strange problem. By using trx. XD02 to fill up field ANRED (Tittle or also known as form of address) in some customer...when I go to check that field in table KNA1. The value in the field is not mantained.
Any idea??? what happen?? I'm searching some notes before to contact SAP.
Thank you,
David

HI
Check whether you have maintained them and saved
You can get the value for ANRED in table KNA1VV Generated Table for View KNA1 and KNVV.
regards
Prashanth Goud

Similar Messages

How to revert back a SAP NOTE? Dump- Field symbol has not yet been assigned

Hi Experts,
We r getting dump(cause: Field symbol has not yet been assigned) in production for ABUMN tx, so, when debugged, it came to know that, the Field symbol is coming from REUSE_ALV_LIST_DISPLAY!!
So, for some reason the system message text is not getting output in ALV-->Dump!!
So, found a NOTE causing this problem!!
So, pls. let me know that, How to revert back this/any SAP NOTE? pls. in detail steps wise!!
thanq
Edited by: Srinivas on Jan 24, 2008 4:32 PM

Hi
In SNOTE tcode, select the Note that you implemented and click on 'RESET SAP Note Implementation'
shylesh

"One or more field types are not installed properly" when I try to add a second discussion board web part to a page

I have a SharePoint 2010 site with two discussion boards. I added one additional field to each of the boards: a lookup to another list to link the discussions to individual projects. I need 2 different boards because they have different posting permissions
(one is open to all for comments, and one is open only to the project team to post but everyone can read).
When I go to the pages for each of the discussion boards, they work fine.
But I'm putting together a page for individual projects, and want to have web parts for both discussion boards on the same page, showing the discussions related to the selected project.
I am able to add one of the discussion boards to a web part in the page, but when I add the second discussion board to the page, the new web part contains:
One or more field types are not installed properly. Go to the list settings page to delete these fields.
Correlation ID: blah blah blah
I've searched for similar postings, but mostly I see this error message related to migration from 2007 to 2010 -- this is not the case here: I created both discussion boards, and the whole site, in SP 2010. I've also found this message related
to coding errors using SPQuery. I am not doing any coding here, just using the built-in SharePoint 2010 Edit Page -> add a web part -> select the discussion list. I tried doing it from SPD with the same result.

I figured it out. I was using ?FilterField1=fieldname&FilterValue1=value on the URL to the page to pick out one project number. The web part I was trying to add was for a list that did not have that particular fieldname. I didn't realize that would matter
since I was using the Connections -> Get Filter Values From to get my filter values from the main web part, which does have that fieldname.
I added a field with that fieldname to the other list and set a workflow to copy the lookup value of the project number lookup field into the new field. Now all is working fine. Sorry for the wild geese in my original question.

One or more field types are not installed properly. Go to the list settings page to delete these fields.

Hi Team,
I have created Administrator -approved Infopath form template to my site and activated same template in CA.
I have used this template in one of my Form library and i can able to submit the Form with success to the library.
when i click "View Item" or "Edit Item" of the form it throws , "One or more field types are not installed properly. Go to the list settings page to delete these fields." error message.
I have refered my log files also but there is no useful information in that, please find my logs for your reference.
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
Logging Correlation Data
xmnv
Medium
Site=/sites/Prototypes
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
Monitoring
b4ly
High
Leaving Monitored Scope (PostResolveRequestCacheHandler). Execution Time=8.51588679566816
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
General
8kh7
High
One or more field types are not installed properly. Go to the list settings page to delete these fields.
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
General
8sl1
High
DelegateControl: Exception thrown while adding control 'ASP._controltemplates_publishingconsole_ascx': One or more field types are not installed properly. Go to the list settings page to delete these fields.
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
General
8kh7
High
One or more field types are not installed properly. Go to the list settings page to delete these fields.
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
Runtime
tkau
Unexpected
System.Runtime.InteropServices.COMException: One or more field types are not installed properly. Go to the list settings page to delete these fields.
at Microsoft.SharePoint.Library.SPRequestInternalClass.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback,
ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView)
at Microsoft.SharePoint.Library.SPRequest.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEA...
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
Runtime
tkau
Unexpected
...RRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback, ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView)
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
Monitoring
b4ly
Medium
Leaving Monitored Scope (Request (GET:http://test-sharepoint:80/sites/Prototypes/TRT/TRTLibrary/Forms/EditForm.aspx?ID=47&Source=http%3A%2F%2Ftest%2Dsharepoint%2Fsites%2FPrototypes%2FTRT%2FTRTLibrary%2FForms%2FAllItems%2Easpx&RootFolder=%2Fsites%2FPrototypes%2FTRT%2FTRTLibrary&ContentTypeId=0x01010100E7EE25E5A6898C4587A6B52C808EF03300FD54861D587A7E43BA3E2E6D392A3526&IsDlg=1)).
Execution Time=32.443369199158
w3wp.exe (0x08E4)
0x2C58
Access Services
Data Layer
8jg2
Medium
ResourceManager.PerformCleanup: Disk Manager: CurrentSize=0.
w3wp.exe (0x08E4)
0x2C58
Access Services
Data Layer
5pbr
Medium
ResourceManager.EvictUnusedItems: Disk Manager: Going to evict unused items. CurrentSize: 0.
w3wp.exe (0x08E4)
0x2C58
Access Services
Data Layer
5pbs
Medium
ResourceManager.EvictUnusedItems: Disk Manager: After unused items eviction. CurrentSize: 0
Diff:0.
w3wp.exe (0x2D7C)
0x0774
SharePoint Foundation
Topology
e5mc
Medium
WcfSendRequest: RemoteAddress: 'http://test-sharepoint:32843/4ac2daef5ffe4850be08bd7bbebb5ac2/MetadataWebService.svc' Channel: 'Microsoft.SharePoint.Taxonomy.IMetadataWebServiceApplication' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges'
MessageId: 'urn:uuid:dcba94c3-2764-428c-b44f-60e703328ceb'
w3wp.exe (0x08E4)
0x2E24
SharePoint Foundation
Topology
e5mb
Medium
WcfReceiveRequest: LocalAddress: 'http://test-sharepoint.anca.com.au:32843/4ac2daef5ffe4850be08bd7bbebb5ac2/MetadataWebService.svc' Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges'
MessageId: 'urn:uuid:dcba94c3-2764-428c-b44f-60e703328ceb'
Jeeva

Hello,
Is there any other content type on library or check if there is any duplicate column? Could you please also show us your library columns detail? (pic is also fine of lib settings page)
If you have any ""Property Promotion" column then SP create those columns as site column and associate them with this template so check "Allow management of content types" for that form library as well.
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

One or more field types are not installed properly. Go to the list settings page to delete these fields. nativehr 0x81020014 /nativehr nativestack /nativestack

Hi ,
I am working in sharepoint 2013, This is a custom timer timer Execute method where i am moving a document item from one library to other once its expired,it was running fine and suddenly giving following error:-
One or more field types are not installed properly. Go to the list settings page to delete these fields.<nativehr>0x81020014</nativehr><nativestack></nativestack>
StackTrace = " at Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx)\r\n at Microsoft.SharePoint.Library.SPRequest.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName,
String bstrViewName, String bstrView...
I have filled all the meta data(site column) for the item but still same error, Please help me out as i have no clue why it is giving this error
public override void Execute(Guid targetInstanceId)
SPSecurity.RunWithElevatedPrivileges(delegate()
using (SPSite site = new SPSite(sourceUrl))
using (SPWeb web = site.OpenWeb())
//gets the document lib
SPList listFrom = web.Lists[sourceList];
//gets the expired documents items
SPQuery query = new SPQuery();
query.ViewFields = "<FieldRef Name='Expiration_x0020_Date'/>";
query.Query = @"<Where><Leq><FieldRef Name='Expiration_x0020_Date'/><Value Type='DateTime' ><Today /></Value></Leq></Where>";
SPListItemCollection items = listFrom.GetItems(query);
//if expired items found
if (items.Count > 0)
SPFile oFile = null;
foreach (SPListItem item in items)
string strfile = item.File.Name;
oFile = web.GetFile(sourceList + "/" + strfile);
//oFile.CopyTo("Archive/" + strfile);
oFile.MoveTo(destinationList + "/" + strfile);

Hi,
I think the issue is related to the internal name of the Expiration Day.
In the caml query code lines, we should use the right internal field name to retrieve and filter the list items.
To avoid such mistake, we can use the CAML Designer tool to generate the caml query code.
We can download the tool here: http://www.camldesigner.com/?p=594
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Error while trying to run Bex Query -------- Field symbol is not assigned.

Hello Every body,
I am facing the following error after giving some value in Selection screen and trying to run the Bex Query
ERROR : Field symbol is not assigned.
Thanks in advance,
Praveen

can u plz give details of variables, what it is build on and the value u r inputing,
also is thr any dump.
double click on the error message it shows u. it will give u the detailed error message. post that too

Field symbol has not yet been assigned. ???

Dear Experts ,
W hen i tried to execute my program this error appears :
Short text
    Field symbol has not yet been assigned.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLSLVC" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
Error analysis
    You attempted to access an unassigned field symbol
    (data segment 32821).
    This error may occur if
    - You address a typed field symbol before it has been set with
      ASSIGN
    - You address a field symbol that pointed to the line of an
      internal table that was deleted
    - You address a field symbol that was previously reset using
      UNASSIGN or that pointed to a local field that no
      longer exists
    - You address a global function interface, although the
      respective function module is not active - that is, is
      not in the list of active calls. The list of active calls
      can be taken from this short dump.
and Here is my CODE :
*& Report ZPO
Report ZPO1.
type-pools slis.
PARAMETERS : PO_Doc like EKBE-EBELN DEFAULT '4800000007'.
PARAMETERS : Plant TYPE WERKS DEFAULT '1000'.
PARAMETERS : PO_ORG TYPE EKORG DEFAULT ''.
data TtlS type mara-wesch .
data TtlH type mara-wesch .
data Ttl type mara-wesch .
data ZEKBE type TABLE OF EKBE.
data ZEKBER type EKBE.
data ZEKPO type TABLE OF EKPO.
data ZEKPOR type EKPO.
data ZEKKOR TYPE EKKO.
data ZNAME1F type LFA1-LIFNR.
data ZWGBEZF TYPE T023T-WGBEZ.
data i type n.
data counter type n.
types : begin of SBAGDS,
Serial Type n, "Purchase Order
EBELN like EKKO-EBELN, "Purchase Order
MATNR like EKPO-MATNR, "Material
TXZ01 like EKPO-TXZ01, "Short Text
MATKL like EKPO-MATKL, "Material Group
WGBEZ like T023T-WGBEZ, "Material Group Desc"
SUBMI like EKKO-SUBMI, "GPM
CHARG like EKBE-CHARG, "Batch
LIFNR like EKKO-LIFNR, "Vendor
NAME1 like LFA1-NAME1, "Vendor Name
RECV like mara-wesch, "Received Quantity
REVR like mara-wesch, "Reversed Quantity
DELV like mara-wesch, "Delivered Quantity
end of SBAGDS .
DATA : BAGDS TYPE SBAGDS OCCURS 0 WITH HEADER LINE.
data Struc like BAGDS.
data: gr_table like BAGDS OCCURS 0 WITH HEADER LINE.
data: gt_fieldcat type slis_t_fieldcat_alv, gt_outtab type SBAGDS occurs 0 with header line.
INITIALIZATION.
i = 0.
counter = 0 .
perform field_cat_init using gt_fieldcat[].
FORM field_cat_init using rt_fieldcat type slis_t_fieldcat_alv.
data: ls_fieldcat type slis_fieldcat_alv,
         pos type i value 1.
clear LS_FIELDCAT.
*Column 1
ls_fieldcat-col_pos           = pos.
ls_fieldcat-fieldname        = 'Serial'.
ls_fieldcat-SELTEXT_L      = 'Serial'.
ls_fieldcat-DDICTXT          = 'L'.
append ls_fieldcat to rt_fieldcat.
clear ls_fieldcat.
pos = pos + 1.
*Column 2
ls_fieldcat-col_pos           = pos.
ls_fieldcat-fieldname        = 'EBELN'.
ls_fieldcat-SELTEXT_L      = 'Purchase Order'.
ls_fieldcat-DDICTXT          = 'L'.
append ls_fieldcat to rt_fieldcat.
clear ls_fieldcat.
pos = pos + 1.
*Column 3
ls_fieldcat-col_pos           = pos.
ls_fieldcat-fieldname        = 'MATNR'.
ls_fieldcat-SELTEXT_L      = 'Material'.
ls_fieldcat-DDICTXT          = 'L'.
append ls_fieldcat to rt_fieldcat.
clear ls_fieldcat.
pos = pos + 1.
*Column 4
ls_fieldcat-col_pos           = pos.
ls_fieldcat-fieldname        = 'TXZ01'.
ls_fieldcat-SELTEXT_L      = 'Short Text'.
ls_fieldcat-DDICTXT          = 'L'.
append ls_fieldcat to rt_fieldcat.
clear ls_fieldcat.
pos = pos + 1.
*Column 5
ls_fieldcat-col_pos           = pos.
ls_fieldcat-fieldname        = 'MATKL'.
ls_fieldcat-SELTEXT_L      = 'Material Group'.
ls_fieldcat-DDICTXT          = 'L'.
append ls_fieldcat to rt_fieldcat.
clear ls_fieldcat.
pos = pos + 1.
*Column 6
ls_fieldcat-col_pos           = pos.
ls_fieldcat-fieldname        = 'WGBEZ'.
ls_fieldcat-SELTEXT_L      = 'Material Group Desc'.
ls_fieldcat-DDICTXT          = 'L'.
append ls_fieldcat to rt_fieldcat.
clear ls_fieldcat.
pos = pos + 1.
*Column 7
ls_fieldcat-col_pos           = pos.
ls_fieldcat-fieldname        = 'SUBMI'.
ls_fieldcat-SELTEXT_L      = 'GPM'.
ls_fieldcat-DDICTXT          = 'L'.
append ls_fieldcat to rt_fieldcat.
clear ls_fieldcat.
pos = pos + 1.
*Column 8
ls_fieldcat-col_pos           = pos.
ls_fieldcat-fieldname        = 'CHARG'.
ls_fieldcat-SELTEXT_L      = 'Batch'.
ls_fieldcat-DDICTXT          = 'L'.
append ls_fieldcat to rt_fieldcat.
clear ls_fieldcat.
pos = pos + 1.
*Column 9
ls_fieldcat-col_pos           = pos.
ls_fieldcat-fieldname        = 'LIFNR'.
ls_fieldcat-SELTEXT_L      = 'Vendor'.
ls_fieldcat-DDICTXT          = 'L'.
append ls_fieldcat to rt_fieldcat.
clear ls_fieldcat.
pos = pos + 1.
*Column 10
ls_fieldcat-col_pos           = pos.
ls_fieldcat-fieldname        = 'NAME1'.
ls_fieldcat-SELTEXT_L      = 'Vendor Name'.
ls_fieldcat-DDICTXT          = 'L'.
append ls_fieldcat to rt_fieldcat.
clear ls_fieldcat.
pos = pos + 1.
*Column 11
ls_fieldcat-col_pos           = pos.
ls_fieldcat-fieldname        = 'RECV'.
ls_fieldcat-SELTEXT_L      = 'Received Quantity'.
ls_fieldcat-DDICTXT          = 'L'.
append ls_fieldcat to rt_fieldcat.
clear ls_fieldcat.
pos = pos + 1.
*Column 12
ls_fieldcat-col_pos           = pos.
ls_fieldcat-fieldname        = 'REVR'.
ls_fieldcat-SELTEXT_L      = 'Reversed Quantity'.
ls_fieldcat-DDICTXT          = 'L'.
append ls_fieldcat to rt_fieldcat.
clear ls_fieldcat.
pos = pos + 1.
*Column 13
ls_fieldcat-col_pos           = pos.
ls_fieldcat-fieldname        = 'DELV'.
ls_fieldcat-SELTEXT_L      = 'Delivered Quantity'.
ls_fieldcat-DDICTXT          = 'L'.
append ls_fieldcat to rt_fieldcat.
clear ls_fieldcat.
pos = pos + 1.
endform.
START-OF-SELECTION.
       select SINGLE * from EKKO into ZEKKOR where EBELN = PO_DOC.
       select SINGLE * from EKPO into ZEKPOR where EBELN = PO_DOC.
       select SINGLE NAME1 from LFA1 into ZNAME1F where LIFNR = ZEKKOR-LIFNR.
*         ' Buliding Structure
          Struc-EBELN = ZEKPOR-EBELN.
          Struc-SUBMI = ZEKKOR-SUBMI.
          Struc-LIFNR = ZEKKOR-LIFNR.
          Struc-Name1 = ZNAME1F.
       select * from EKPO into TABLE ZEKPO where EBELN = PO_Doc and WERKS = plant.
       LOOP at ZEKPO into ZEKPOR.
           select SINGLE WGBEZ from T023T into ZWGBEZF WHERE MATKL = ZEKPOR-MATKL .
           counter = counter + 1.
*         ' Buliding Structure
          Struc-Serial = counter.
          Struc-MATNR = ZEKPOR-MATNR.
          Struc-TXZ01 = ZEKPOR-TXZ01.
          Struc-MATKL = ZEKPOR-MATKL.
          Struc-WGBEZ = ZWGBEZF.
*          Calcualting Debit transactions from PO History
           select * from EKBE into table ZEKBE where EBELN = PO_Doc and MATNR = ZEKPOR-MATNR and EBELP = ZEKPOR-EBELP and BWART NOT LIKE '' and SHKZG = 'S'.
           LOOP AT ZEKBE INTO ZEKBER.
               TtlS = TtlS + ZEKBER-MENGE.
           ENDLOOP.
*          ' Buliding Structure
           Struc-CHARG = ZEKBER-CHARG.
           Struc-RECV = TtlS.
           Ttl = TtlS.
           clear TtlS.
*         Calcualting Credit transactions from PO History
         select * from EKBE into table ZEKBE where EBELN = PO_Doc and MATNR = ZEKPOR-MATNR and EBELP = ZEKPOR-EBELP and BWART NOT LIKE '' and SHKZG = 'H'.
           LOOP AT ZEKBE INTO ZEKBER.
               TtlH = TtlH + ZEKBER-MENGE.
           ENDLOOP.
*          ' Buliding Structure
           Struc-REVR = TtlH.
*          Calculating Total Delivered
           Ttl = Ttl - TtlH.
           clear TtlH.
*          ' Buliding Structure
           Struc-DELV = Ttl.
           clear Ttl.
*      Writtng ITAB
       APPEND Struc to BAGDS.
       ENDLOOP.
*      Reading ITAB
*       WRITE : / , 'ITAB Begin : '    .
*       loop at BAGDS into Struc.
*         counter = counter + 1.
*         write : /,'Serial : ',counter.
*         write : / ,'PO : ',Struc-EBELN.
*         write : / ,'Vendor : ',Struc-LIFNR.
*         write : / ,'Vendor Name : ',Struc-NAME1.
*         write : / ,'Material : ',Struc-MATNR.
*         write : /,'Short Text: ',Struc-TXZ01.
*         write : / ,'Model : ',Struc-MATKL.
*         write : / ,'Model Desc : ',Struc-WGBEZ.
*         write : /,'GPM : ',Struc-SUBMI.
*         write : /,'Lot : ',Struc-CHARG.
*         write : /,'Received : ',Struc-RECV.
*         write : /,'Reversed : ',Struc-REVR.
*         write : /,'Delivered : ',Struc-DELV,/,/,/.
*       ENDLOOP.
* Call ALV Grid Viewer
*BREAK-POINT.
gr_Table[] = BAGDS[].
   CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
        EXPORTING
             I_STRUCTURE_NAME   = 'SBAGDS'
             IT_FIELDCAT          = gt_fieldcat[]
        TABLES
             T_OUTTAB                  = gr_Table.
Please Advise
Edited by: Sap Sap on Jul 27, 2009 12:18 PM
Edited by: Sap Sap on Jul 27, 2009 12:22 PM
Edited by: Sap Sap on Jul 27, 2009 12:22 PM

Hi,
The problem seems to be in your ALV grid display.
The reason must be your field catalog.
Just check your fieldcatalog.
The value in the fieldname field of the fieldcatalog should be same as the fieldname in your internal table and should be in capital letters.
Probably you must have mistyped some field.
Kinldy check.
Regards,
Ankur Parab

Currency Field - KOMK-WAERK not getting populated

Dear All,
In my infoset, i am reading the value from KONV table. But when i generate the infoset, system prompts a Warning Message saying:
Currency Field KOMK-WAERK will not be filled. Affected currency amount fields: (& it gives out the list of fields).
In my data section when i put TABLES KOMK, then the message does not appear, but the currency field still does not get populated when i execute the query.
Any suggestions as to how i can make the currency field populate in my output?
Await inputs.
Anyone to help?
Edited by: Vivek on Feb 9, 2008 8:51 PM

Is not KOMK a structure, you need to fill this structure. Try to map required fields as following :
CLEAR KOMK.
KOMK-MANDT = SY-MANDT.
KOMK-KALSM = VBDKR-KALSM.
KOMK-FKART = VBDKR-FKART.
KOMK-KAPPL = 'V'.
IF VBDKR-KAPPL NE SPACE.
KOMK-KAPPL = VBDKR-KAPPL.
ENDIF.
KOMK-WAERK = VBDKR-WAERK.
KOMK-KNUMV = VBDKR-KNUMV.
KOMK-VBTYP = VBDKR-VBTYP.
KOMK-BUKRS = VBDKR-BUKRS.
KOMK-BELNR = VBDKR-VBELN.
Regards

Custom Field value is not getting populated in Display mode

Hi Experts ,
I have created a custom field on sales tab for BP Role Bill to prty in BP transaction in SAP CRM. The problem i am facing is that , after i chose my sales area field value is not populating in first time no matter whether i am in display or change mode but the moment i switch to the other mode the value is being populated. Kindly help me in solving this.
Regards,
Ameet

Dear Chetan,
If the field is added through AET, can you please check the Get & Set Methods?
If the field value has fixed values which you have defined while creating, then check GET_V & GET_P methods.
Thanks & Kind Regards,
Ravi Kumar A R

Field symbol has not yet been defined-ALV Grid Display in Report

Hi all,
Iam calling a Function module for ALV grid display in Report programming. Its throwing the Error message Field Symbol has not yet defined. Can any one suggest what i have to do regarding it?

Hi,
<li> This is problem with fieldcatalog.
<li> Check field names or table name in small letters in quotes while building fieldcatalog internal table
<li> Check the fieldcatalog internal table , whether it has same fields as in data table which is shown using GRID_DISPLAY function module.
Thanks
Venkat.O

"One or more field types are not installed properly. Go to the list settings page to delete these fields" while accessing website pages

We have a publishing website in SharePoint 2010. There are total 4 environments - Development, Test, Stage and Production. For some enhancements, we had to create some new lists and libraries. When we moved changes from Development to Test environment, everything
worked fine. Relevant lists and libraries in lower environments were saved as templates (in .stp format) including content, imported to higher environment, lists/libraries were created in higher environment using imported templates.
Things worked fine from Development to Test. We did similar exercise from Test to Stage environment. Now in Stage, when we access some pages, we get error message - "One or more field types are not installed
properly. Go to the list settings page to delete these fields.". ULS logs don't tell which exact list has got problems.
On searching for this error, I got many articles that explain how this could happen when we migrate from SharePoint 2007 (MOSS) to 2010. Though our case different (as all our environments are in 2010), we still tried following steps.
De-activate 'SharePoint Server Publishing Infrastructure' Site Collection feature
Go to https://site-name/relationships%20list/allitems.aspx. This is a hidden list. Delete this list.
Re-activate 'SharePoint Server Publishing Infrastructure' Site Collection feature.
Make sure that new hidden list with one item is created at https://site-name/relationships%20list/allitems.aspx
However, this didn't help as we are still getting same error message. Appreciate if someone can suggest how this issue can be resolved.
Following are ULS logs:
Unable to execute query: Error 0x81020014
One or more field types are not installed properly. Go to the list settings page to delete these fields.
System.Runtime.InteropServices.COMException: One or more field types are not installed properly. Go to the list settings page to delete these fields.
at Microsoft.SharePoint.Library.SPRequestInternalClass.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback,
ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView)
at Microsoft.SharePoint.Library.SPRequest.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback, ISPDataCallback
pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView)
Thanks!

Hi Shrishail ,
Some time this issue occurs if you have any custom filed types in the list or library and that field type is not installed on server .
Can you please check that if you are having any custom field types column on the list and library and if that is the case you need to install that field type on the server. sometimes it happens if field types are not properly deployed / Installed then
you have to uninstall that field types (retract solution) and deploy it again.
Thanks,
Ujjwal

Field T_STCD1 does not exist in form this erroe msg coming in smartform

hi,
in my smartform, if i give one set of input like, 1st qtr of 2008, vendor and compcode, its displaying the value.
but if i give the input like 1st qtr of 2007, vendor and some other compcode its giving some error like
field T_STCD1 does not exist in form .
this error coming after printpreview and not displaying.
how can i debug it.
can any one help me...........plz
its very urgent.
thanks.

report zmm_vat_ex_cert message-id zz                        .
                         TABLE DECLARATION                           *
tables: bseg , tvko.
*Intenal Tables Declarations                                           *
types: begin of it_address_type .
        include structure zvat_vendor.
types :end of it_address_type.
types : begin of it_address_info_type.
        include structure zadrc_table.
types: end of it_address_info_type.
types : begin of it_desig_type.
        include structure zmm_vat_sign.
types: end of it_desig_type.
types: begin of it_bkpf_type,
      bukrs type bkpf-bukrs,
      belnr type bkpf-belnr,
      gjahr type bkpf-gjahr,
      blart type bkpf-blart,
      bldat type bkpf-bldat,
      xblnr type bkpf-xblnr,
      awkey type bkpf-awkey ,
      end of it_bkpf_type.
types : begin of it_bseg_type,
      bukrs like bseg-bukrs,
      belnr like bseg-belnr,
      gjahr like bseg-gjahr,
      bschl like bseg-bschl,
      mwskz like bseg-mwskz,
      shkzg like bseg-shkzg,
      wrbtr like bseg-wrbtr,
      sgtxt type bseg-sgtxt,
      end of it_bseg_type.
types: begin of it_rseg_type,
       ebeln like ekpo-ebeln,
       ebelp like ekpo-ebelp,
       bukrs like bkpf-bukrs,
       txz01 type ekpo-txz01,
       wrbtr type rseg-wrbtr,
       end of it_rseg_type.
data:begda type d, endda type d.
types: begin of it_item_type.
        include structure zitem_vat.
types:end of it_item_type.
data: it_rseg type table of it_rseg_type,
       wa_it_rseg like line of it_rseg.
data: gt_addr type table of it_address_type.
data gt_addr_info type table of it_address_info_type.
data gt_bkpf type table of it_bkpf_type.
data gt_bseg type table of it_bseg_type.
data:
      gt_tvko type standard table of tvko,
      gt_item type table of it_item_type,
      h_itab type table of it_bseg_type,
      it_desig type table of it_desig_type,
      temp_item type table of it_item_type .
data:wa_addr like line of gt_addr,
     wa_addr_info like line of gt_addr_info,
     wa_bkpf like line of gt_bkpf,
     wa_bseg like line of gt_bseg,
     wa_item like line of gt_item,
     wa_h_itab like line of h_itab,
     wa_it_desig like line of it_desig,
     wa_temp_item like line of temp_item,
    wa_tvko LIKE LINE OF gt_tvko.
     wa_tvko type tvko.
     Data Declaration                                                *
data: sumtotal type bseg-wrbtr, "rbkp-waers ,
      sl_no type zmm_vatex_sno-serial_no,
      fiscal_year type string,
      fm_name type rs38l_fnam ,
      w_q_flag(5),
      w_quarter type string ,
      close_date type sy-datum ,
      fiscal type sy-datum, fiscal_nxt type sy-datum,
      gv_belnr type bkpf-belnr,
      gv_gjahr type bkpf-gjahr.
data: ca_quarter type i.
data: l_adrnr type t001-adrnr.
data wa_vatex_sno type zmm_vatex_sno.
data: q(1).
data: stdtext(25).
S E L E C T I O N   S C R E E N                                     *
selection-screen begin of block b1 with frame title text-s01.
select-options: s_date for sy-datum obligatory no-extension.
parameters : vendor type lfa1-lifnr obligatory ,
             compcode type bkpf-bukrs obligatory.
select-options taxcode for bseg-mwskz obligatory default 'VI'.
selection-screen end of block b1.
at selection screen
at selection-screen on s_date.
if s_date-low0(4) <> s_date-high0(4).
    message e023 with text-e01.
endif.
*get calendar quarter using the month entered in From date.
*calculate the fiscal year and quarter
if s_date-low4(2) > '0' and s_date-low4(2) <= '3' .
    ca_quarter = 1.
    fiscal0(4) = s_date-high0(4) .
    fiscal_nxt0(4) = s_date-high0(4) - 1.
    concatenate fiscal_nxt2(2) '-' fiscal2(2) into fiscal_year .
    concatenate 'last quarter of year ' fiscal_nxt0(4) '-' fiscal0(4)
    into w_quarter separated by space .
    q = '4'.
elseif ( s_date-low4(2) > '3' and s_date-low4(2) <= '6' ).
    ca_quarter = 2.
    fiscal0(4) = s_date-high0(4) + 1.
    fiscal_nxt0(4) = s_date-high0(4).
    concatenate fiscal_nxt2(2) '-' fiscal2(2) into fiscal_year .
    concatenate '1st quarter of year ' fiscal_nxt0(4) '-' fiscal0(4)
     into w_quarter separated by space .
    q = '1'.
elseif ( s_date-low4(2) > '6' and s_date-low4(2) <= '9' ).
    ca_quarter = 3.
    fiscal0(4) = s_date-high0(4) + 1.
    fiscal_nxt0(4) = s_date-high0(4).
    concatenate fiscal_nxt2(2) '-' fiscal2(2) into fiscal_year .
    concatenate '2nd quarter of year ' fiscal_nxt0(4) '-' fiscal0(4) INTO
     w_quarter separated by space .
    q = '2'.
elseif ( s_date-low4(2) > '9' and s_date-low4(2) <= '12' ).
    ca_quarter = 4.
    w_quarter = '3rd quarter of year'.
    fiscal0(4) = s_date-high0(4) + 1.
    fiscal_nxt0(4) = s_date-high0(4).
    concatenate fiscal_nxt2(2) '-' fiscal2(2) into fiscal_year .
    concatenate '3rd quarter of year ' fiscal_nxt0(4) '-' fiscal0(4) INTO
     w_quarter separated by space .
    q = '3'.
endif.
*get first and last day of quarter by fetching calendar quarter and year in FM
call function 'HR_99S_GET_DATES_QUARTER'
    exporting
      im_quarter = ca_quarter
      im_year    = s_date-low+0(4)
    importing
      ex_begda   = begda
      ex_endda   = endda.
*validate the input dates is start and end of quarter
if s_date-low <> begda or s_date-high <> endda.
    message e023 with 'Enter quarter begin and end dates only'.
endif.
*get last day of next month. for close date
endda = endda + 1.
call function 'RP_LAST_DAY_OF_MONTHS'
    exporting
      day_in            = endda
    importing
      last_day_of_month = close_date
    exceptions
      day_in_no_date    = 1
      others            = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
     Start of Selection
start-of-selection.
*CNO is specific to a Quarter/ Company code/ Vendor.
unpack vendor to vendor.
clear:sl_no, wa_vatex_sno.
select single * from zmm_vatex_sno into wa_vatex_sno where from_date
eq s_date-low and to_date eq s_date-high and vendor eq vendor
    and compcode eq compcode.
if sy-subrc eq 0.
    sl_no = wa_vatex_sno-serial_no.
else.
    select max( serial_no ) from zmm_vatex_sno into wa_vatex_sno-serial_no WHERE
      from_date eq s_date-low and to_date eq s_date-high and compcode eQ compcode.
    if sy-subrc = 0.
      sl_no = wa_vatex_sno-serial_no + 1.
    else.
      sl_no = 1.
    endif.
    wa_vatex_sno-from_date = s_date-low.
    wa_vatex_sno-to_date = s_date-high.
    wa_vatex_sno-vendor = vendor.
    wa_vatex_sno-compcode = compcode.
    wa_vatex_sno-serial_no = sl_no.
    insert zmm_vatex_sno from wa_vatex_sno.
endif.
*data selection from bkpf by date,fiscal and compcode
refresh gt_bkpf.
select bukrs
        belnr
        gjahr
        blart
        bldat
        xblnr
        awkey
        into table gt_bkpf from bkpf
        where bukrs eq compcode and
        budat in s_date and gjahr eq fiscal+0(4).
check not gt_bkpf[] is initial.
refresh gt_bseg.
select bukrs
         belnr
         gjahr
         bschl
         mwskz
         shkzg
         wrbtr
         sgtxt from bseg into table gt_bseg
    for all entries in gt_bkpf where
          bukrs eq compcode and
          mwskz in taxcode and
          lifnr eq vendor and
         belnr = gt_bkpf-belnr and
     gjahr = gt_bkpf-gjahr and shkzg = 'H'.
selection without vendor   and posting key 40     *
refresh h_itab.
select bukrs
         belnr
         gjahr
         bschl
         mwskz
         shkzg
         wrbtr from bseg into table h_itab
         for all entries in gt_bseg
         where bukrs = gt_bseg-bukrs and
         belnr = gt_bseg-belnr and
         mwskz = gt_bseg-mwskz and
         gjahr = gt_bseg-gjahr and
         ( bschl = '40' or bschl = '21' ).
if sy-subrc = 0.
deduct the amount if posting key is 40 for PO based docs
    clear wa_h_itab.
    loop at h_itab into wa_h_itab where bschl = '40'.
      clear wa_bseg.
      read table gt_bseg into wa_bseg with key belnr = wa_h_itab-belnr.
      if sy-subrc = 0.
        read table gt_bkpf into wa_bkpf with key belnr = wa_h_itab-belnr.
        if wa_bkpf-blart <> 'KR'.
          wa_bseg-wrbtr = wa_bseg-wrbtr - wa_h_itab-wrbtr.
        endif.
        modify gt_bseg from wa_bseg
         transporting wrbtr where belnr = wa_bseg-belnr
         and bschl = wa_bseg-bschl .
      endif.
      clear wa_h_itab.
    endloop.
deduct the amount if posting key is 21 for non-PO based docs
    clear wa_h_itab.
    loop at h_itab into wa_h_itab where bschl = '21'.
      clear wa_bseg.
      read table gt_bseg into wa_bseg with key belnr = wa_h_itab-belnr.
      if sy-subrc = 0.
        read table gt_bkpf into wa_bkpf with key belnr = wa_h_itab-belnr.
        if wa_bkpf-blart = 'KR'.
          wa_bseg-wrbtr = wa_bseg-wrbtr - wa_h_itab-wrbtr.
        endif.
        modify gt_bseg from wa_bseg
         transporting wrbtr where belnr = wa_bseg-belnr.
      endif.
      clear wa_h_itab.
    endloop.
endif.
final internal table
clear wa_item. refresh gt_item. clear wa_bseg.
loop at gt_bseg into wa_bseg.
    read table gt_bkpf into wa_bkpf with key belnr = wa_bseg-belnr .
    if sy-subrc = 0.
      move :
       wa_bkpf-xblnr to wa_item-xblnr,
            wa_bkpf-belnr to wa_item-belnr,
            wa_bkpf-bldat to wa_item-bldat,
           wa_bseg-wrbtr to wa_item-wrbtr.
    endif.
*selections for item description
    refresh it_rseg.
    select ekpoebeln ekpoebelp ekpobukrs txz01 rsegwrbtr
      into table it_rseg
      from rseg join ekpo
      on rsegebeln = ekpoebeln
      and rsegebelp = ekpoebelp
      and rsegbukrs = ekpobukrs
        where rsegbelnr = wa_bkpf-awkey(10) and rseggjahr = wa_bkpf-gjahr AND
        ekpo~bukrs = wa_bkpf-bukrs.
    if sy-subrc = 0.
      loop at it_rseg into wa_it_rseg.
        wa_item-txz01 = wa_it_rseg-txz01 .
        if sy-tabix <> 1.
       wa_item-wrbtr = wa_it_rseg-wrbtr .
          wa_item-wrbtr = space .
        endif.
        append wa_item to gt_item.
      endloop.
    else.
      wa_item-txz01 = wa_bseg-sgtxt.
      append wa_item to gt_item.
    endif.
    clear: wa_bseg, wa_item.
endloop.
*if records not found give message.
if gt_item[] is initial.
    message e000(vz) with text-x01.
endif.
calculate the sumtotal
loop at gt_item into wa_item.
    sumtotal = sumtotal + wa_item-wrbtr .
endloop.
     Selecting supplier address                                     *
select single * from tvko into wa_tvko where vkorg = compcode.
append wa_tvko to gt_tvko.
if wa_tvko-vkorg = '2014'.
    stdtext = 'Z_2014_SOFTEX'.
elseif wa_tvko-vkorg = '2006'.
    stdtext = 'Z_2006_SOFTEX'.
else.
    stdtext = wa_tvko-txnam_adr.
endif.
select lifnr
         name1
         name2
         ort01
         ort02
         pfach
         stras
         regio from lfa1 into table gt_addr
         where lifnr eq vendor .
     Selecting sez address                                         *
SELECT SINGLE adrnr FROM t001 INTO l_adrnr WHERE bukrs EQ compcode.
SELECT name1
      name2
      city1
      city2
      post_code1
      post_code2
      street
      house_num1
      FROM adrc INTO TABLE gt_addr_info
      WHERE addrnumber = l_adrnr.
     Information for designation                                    *
select * from zmm_vat_sign into table it_desig where company = compcode
     Call Function module SSF_FUNCTION_MODULE_NAME                *
call function 'SSF_FUNCTION_MODULE_NAME'
    exporting
      formname                 = 'ZMM_VAT_EX_CERT'
VARIANT                  = ' '
DIRECT_CALL              = ' '
   importing
     fm_name                  = fm_name
EXCEPTIONS
NO_FORM                  = 1
NO_FUNCTION_MODULE       = 2
OTHERS                   = 3
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
     Call Function module fm_name                                  *
call function fm_name
    exporting
ARCHIVE_INDEX              =
ARCHIVE_INDEX_TAB          =
ARCHIVE_PARAMETERS         =
CONTROL_PARAMETERS         =
MAIL_APPL_OBJ              =
MAIL_RECIPIENT             =
MAIL_SENDER                =
OUTPUT_OPTIONS             =
USER_SETTINGS              = 'X'
      doc_num                    = sl_no
      quarter                    = w_quarter
      date                       = s_date-high
      sumtotal                   = sumtotal
      close_date                = close_date
      fiscal_year              = fiscal_year
      ca_quarter             = q
      text_name             = stdtext
IMPORTING
DOCUMENT_OUTPUT_INFO       =
JOB_OUTPUT_INFO            =
JOB_OUTPUT_OPTIONS         =
    tables
      itab                       = gt_item
      it_address                 = gt_addr
      it_infoaddress              = gt_addr_info
      it_designation             = it_desig
      it_tvko                   = gt_tvko
EXCEPTIONS
FORMATTING_ERROR           = 1
INTERNAL_ERROR             = 2
SEND_ERROR                 = 3
USER_CANCELED              = 4
OTHERS                     = 5
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.

RUn time error while saving po    Field symbol has not yet been assigned.

Hi Experts,
I am getting abap dump while saving PO in ME21N plz seee the below dump plzzzzzzzzzzzzzzzzzzzzz help me
Runtime Errors         GETWA_NOT_ASSIGNED
Date and Time          19.06.2009 11:24:46
Short dump has not been completely stored (too big)
Short text
     Field symbol has not yet been assigned.
What happened?
     Error in the ABAP Application Program
     The current ABAP program "SAPLKKBL" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Error analysis
     You attempted to access an unassigned field symbol
     (data segment 106).
     This error may occur if
     - You address a typed field symbol before it has been set with
       ASSIGN
     - You address a field symbol that pointed to the line of an
       internal table that was deleted
    - You address a field symbol that was previously reset using
      UNASSIGN or that pointed to a local field that no
      longer exists
    - You address a global function interface, although the
      respective function module is not active - that is, is
      not in the list of active calls. The list of active calls
      can be taken from this short dump.
How to correct the error
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "GETWA_NOT_ASSIGNED" " "
    "SAPLKKBL" or "LKKBLF99"
    "GEN_FIELD_OUT2"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
   In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
em environment
SAP-Release 700
Application server... "gplqty"
Network address...... "128.12.0.19"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "8x AMD64 Level"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "GPLQTY"
Database type..... "MSSQL"
Database name..... "GPQ"
Database user ID.. "gpq"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Aug 4 2008 02:33:25"
create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
Database version. "SQL_Server_8.00 "
Patch level. 172
Patch text.. " "
Database............. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
   NT 6.0"
Memory consumption
Roll.... 16192
EM...... 16759360
Heap.... 0
Page.... 237568
MM Used. 12036016
MM Free. 530432
er and Transaction
Client.............. 410
User................ "SAP_SUPPORT"
Language key........ "E"
Transaction......... "ME21N "
Transactions ID..... "9E955CDE97CBF1648B4C001A64C7B85A"
Program............. "SAPLKKBL"
Screen.............. "SAPLKKBL 0500"
Screen line......... 3
Information on where terminated
    Termination occurred in the ABAP program "SAPLKKBL" - in "GEN_FIELD_OUT2".
    The main program was "RM_MEPO_GUI ".
    In the source code you have the termination point in line 2908
    of the (Include) program "LKKBLF99".
Source Code Extract
Line SourceCde
2878       else.
2879         assign <fs11> to <field>.
2880         gs_fc = gs_sfc11.
2881       endif.
2882     when 012.
2883       if gs_out_flags-slave ne 'X'.
2884         assign <fm12> to <field>.
2885         gs_fc = gs_mfc12.
2886       else.
2887         assign <fs12> to <field>.
2888         gs_fc = gs_sfc12.
2889       endif.
2890     when 013.
2891       if gs_out_flags-slave ne 'X'.
2892         assign <fm13> to <field>.
2893         gs_fc = gs_mfc13.
2894       else.
2895         assign <fs13> to <field>.
2896         gs_fc = gs_sfc13.
2897       endif.
2898     when 014.
2899       if gs_out_flags-slave ne 'X'.

Hi,
this error occurs when you try to address a field-symbol before it has been assigned to a field or
the assignment has failed.
Use following code to remove this dump
Assign <mara-matnr> to <fs>.
if sy-subrc <> 0.
Error Message.
Endif.
Hope it helps,
Raj

PCUI error: Field group could not be read completely

Hello,
I am trying to remove some fields from the Sales Data tab in the Sales Orders application CRMD_BUS2000115. I have changed field groups before, noth in CRM 4.0 and CRM 5.0, but in this case, I always get this error.
By going into debugging mode (tracelevel set to 2222) I determined the main field group to be SLO_SALES, with lots of smaller reference groups below. Whenever I change one of the reference groups and try to generate the layout of SLO_SALES I get the error "Field group could not be read completely". I even reverted all changes by emptying all the entries from the reference groups so that my c-tables are empty, but I still get the error. All field groups below this one yield the error "No field group selected in blueprint table", so I cannot build those either.
Has anybody else tried to change the contents of that application in that tab?
Regards
Thomas

Hi Thomas,
Everytime you do changes in the reference group the entries in table 'CRMC_FIELDGRP' changes. So you will have to go to this table check entries for the main feild group 'SLO_SALES' in your case and then change entries for this feildgroup in CRMC_BLUEPRINT_C. The idea ia that the data should be consistent/same in both the places.
Hope this helps you.
Regards,
Hetal.

BP new field update is not possible

Hi Experts,
I work in CRM 4.0 which is connected to R/3. I have created a new BP field with EEWB. I would like to replicate this field into a standard R/3 field.
Without any enhancement the new field is replicated in "Insert" mode but in "Update" the replication does not work.
I discovered two problems in R/3. The exchange structure does not contain the new field and the BP does not exist in R/3 BUT000 after creation.
In "Update" mode the system searches for BP in R/3 BUT000.
Finally I extended the exchange structure in R/3 and if I create a new BP it will be created in R/3 even in R/3 BUT000 and during "Update" the new field value will be updated.
My only problem is that I have 100.000 BP's in the systems which were created without the enhanced R/3 structure and the update of the new field content is not possible. The R/3 BUT000 does not contains these 100.000 BP's.
Do you have any idea how to solve this issue?
Thanks in advance!
Regards,
Tom

Hi Thomas,
I would have liked to reply you back earlier on, but I was able to see my points only today.
1 How to manipulate Bapi to load it. Please select your Bapi which refer to the proper object in trx CODE Bapi. Then talk to your developper to create the right program to load the missing data, supposedly able to manage files (better a txt file).
Next monday if you wish I may send you documentation concerning Bapi, if you give me your e-mail
2. How to upload to your backend the changes of Bps. There is an envent you need to associate to your object Bupa in administration CONSOLE - DATA EXCHANGE. It is explained in the Best practise manual called Replication.
Please refer to my attached thread to find out the manual in the Best Practise Crm for your version:
Re: Download Conditions from R3
Then, if this doesn't work, check if the function module in charge of uploading the changes is working, by putting a Breakpoint in the FM associate to your object Bupa in Business object in administration console.
<b>Please reward with points if it helps.</b>
AndreA

Field in KNA1 not mantained

Similar Messages

Maybe you are looking for