Fields missing in Datasource how to find

Hi Gurus ,
in CRM we have datasource 0CRM_UT_QUOTATION_I for this extract structure is
CRM_UTIL_BW_QUOTATION , when i double click on extract structure i can find the extra fields which i required . but when i see the data source those fields i cant see , what could be the reason.
fields i am seeing in extract structure i should be able to see in data source also.
kindly suggest.
Srinivas-

either write an ABAP (I you feel comfortable enough to not screw the whole table...) or request an authentication key in the market place in order to change the attribute "maintenance allowed" of this table in SE11.
The best is to get in touch with your basis group....
otherwise there is still the /h option
mark the record to be changed
write /h in the transaction input box and press enter
hit the display button
now you are in the debug mode, execute the code with F5 until it comes to form SET_STATUS_VAL
change the value of the "code" variable to 'EDIT' instead of 'SHOW'
press F8 to run the code.
You should now be able to change this record....
The above method is definitively not liked by the pure basis guys and use it at your own risk....
I suggest to proceed with requesting an object key and changing the record by standard means...
hope this helps...
Olivier.
Message was edited by:
        Olivier Cora

Similar Messages

  • Fields Missing in datasource

    Hi friends,
              Please help, I have some fields missing in my data source , but they are available in the extract structure of that data source..what do I do now, to see the same fields in my data source also?? should I ahve to append the data source??
    thanks alot in advance,

    Hi
    I think you didn't appended the fields to the append structure.
    Try to append the fields in the append structure and save ands activate it. and again activate the extract structure.
    then you can see in RSA6
    Hope this helps
    shiva

  • How to find Delta Field for 0MATERIAL?

    Hi,
    In general when we create Generic Data Sources with Delta Updating we give a Delta specific field name,like that how to find which is the field that is used for 0MATERIAL OR 0MAT_SALES,i am not able to find this information using RSA7 transaction.Suggestions to this would be helpful.
    Thanks in advance.
    Monica.

    Hi Monica,
    You can find the field that tracks the changes to the master data lets say some time stamp or changed date..etc.
    Thanks,
    Krish

  • How to find from which table we r fetching the data

    Hi friends,
    i got a requirement to design a query,in my transfer rules i check the info object related to the fiels.but in my crm the field name is different.
    how to find from which table the field is fetched........
    please tell me........
    Regards
    sridath

    Dear Sridath,
    In ST05 switch on the SQL Trace.
    Goto RSA3.
    Give your DataSource name > Execute
    Goto ST05...Switch OFF the Trace
    Analyze the Trace file
    Gives you details about the fields and Tables from where you are fetching.
    OR
    Goto LBWE
    Find your DataSource > Maintenance > Display mode
    In right side window...expand ALL list box...
    Exclude MC and take other words...they are the Source Tables.
    Regards,
    Ramkumar.

  • How to find the tables corresponding to a particular field in datasource.

    Hi Experts,
    There are lot of extra fields in the structure like MCEKKN as compared with the table EKKN. The data in these fields are coming from some other table.
    So can u tell me how to find these tables corresponding to these fields?
    Let me be more clear..
    I want to know that the data in the datasource like 2LIS_02_ACC are coming from lot of tables.
    How can I find those tables corresponding to each field in the extraction structure.
    I have tried with ST05...as well as by filling setup tables in debbugging mode..but I am still in lot of confusion.
    Please try to help me....U will get good points in response.
    Thanx.
    Vinod.

    Hi Vinod,
    Why are you trying to enhance the extractor because the steps you are following is tio enhance the structure
    <i><b>like transferd one of the field from pool to selection criteria</b></i>
    If you want to see only the fields of the extractor and from which table it is coming you just have to see the pool only.
    There in the lef you have the fields which are already present  in the extractor and in the right you have the avaialbale fields present.
    Also in the two selection pools if you will see carefully you will find in each selection pool
    "Table name" and then the "field name" and then description of the field data type and length.
    Like in case of 2lIS_13_VDITM you will find all the fields coming from VBRK and VBRP and VBUK.
    Just check it you will get an idea.
    In this way you can find that which field in the extractor is coming from which of fields of the table.
    I think this is what you want to know.
    If not clear then do reply
    Thanks

  • How to Find fields and tables of any Datasource

    Hi  ,
    How to find tables and fields for DataSource  2LIS_05_QE1 , and extractstruct is MC05Q1_0INSP as per requirement to find INCOMING PPM.
    is there any specific technique , to find any tables and fields related to our requirement in any DataSource .
    thank's

    Check in LBWE transaction ..
    for
    2LIS_05_QE1 , and extractstruct is MC05Q1_0INSP as per requirement to find INCOMING PPM.
    go to quality management ..
    you will get the data source
    if you click on maintenance ..
    BR
    Manthan

  • How to find the userid who created the Datasource?

    hi experts,
    How to find out which user has created or generated the Data source based on PLANNING AREA in APO?
    when i replicate the data source it is showing my name, but the issue is i would like to know the Person (USER) who had generated or created the Data source Based on Planning Area?
    Give me ur inputs plz.
    Regards
    venuscm

    Hi Venu ,
    Please find list of tables for datasources :
    1.ROOSOURCE Header Table for SAP BW DataSources (SAP Source System/BW System)
    Check fields TSTPNM ,TSTPDAT ,TSTPTIM
    2.RODELTAM BW Delta Procedure (SAP Source System)
    3.RSOLTPSOURCE Replication Table for DataSources in BW
    *Check fields TSTPNM ,TIMESTMP
    These tables only store information who changed it last .
    Hope this will be helpful.
    Regards,
    Jaya

  • How to find table name for the fields from Standard Extractor in CRM system

    How to find table name of fields from the standard extractor in CRM system ?
    e.g. We use LBWE TCode in R/3 system to find table name for the field from Extractor VCSCL(e.g.).
    Likewise is there any way to find table name for the fields from Standard extractor like 0CRM_LEAD_I.

    Hi ,
    Please find the link below for understanding BW CRM analysis.
    http://help.sap.com/bp_biv135/html/bw.htm
    activate the CRM DSs by scenario:
    1) Activate the application component hierarchy (tcode RSA9). Changes made to the application component hierarchy in the CRM system can be transferred to the BW using the "Edit Application Component Hierarchy" (SBIW - Postprocessing of DataSources).
    SAP Note 434886 must be implemented in CRM 3.0 before the application component hierarchy is activated.
    2) Activate the Business Content DataSources (tcode RSA5).
    Select/enter the application component and choose Execute (F8).
    To compare the shipped and active versions, choose the 'Select Delta' pushbutton. If there is no active version of the DataSource, it is selected automatically.
    To activate the shipped version, choose the 'Transfer DataSources' pushbutton.
    3) Management of the versions of the BW-Adapter metadata (tcode BWA5). All DataSources are displayed that are managed by the BW Adapter.
    As in transaction RSA5 (Service API Metadata Activation), the 'Select Delta' function can be used to select the inactive DataSources or compare shipped and active versions.
    You can also go directly to the screen for maintaining DataSources that are managed by the BW Adapter.
    The 'Compare Version' function makes a detailed comparison of the shipped and active versions.
    All BW-Adapter metadata is considered when versions are compared:
    Header information (Table SMOXHEAD)
    Mapping information (Table SMOXRELP)
    Global selection conditions (Table SMOXGSEL)
    Attribute key fields (Table SMOXAFLD)
    Hope this helps.
    Regards,
    csm reddy

  • How to find R/3 fields to BI InfoObjetcs .

    Hi,
    I have R/3 fields , but now i want to find corresponding BI Infoobjects , Pls let me know how to find it.
    I have tried RSOSFIELDMAP, 90% Infoobjects are not available i nBI.
    Note : I have Created generic datasource and now i want to store the data in DSO.
    Pls help me .
    Regards,
    Nithi.

    Hi,
    Use the follwoing table for finding InfoObjects
    RSDIOBJ----
    Directory of all InfoObjects
    RSDIOBJT----
    Texts of InfoObjects
    RSDIOBJ----
    Directory of all InfoObjects
    RSDIOBJT----
    Texts of InfoObjects
    RSDATRNAV------- Navigation Attributes
    RSDATRNAVT------- Navigation Attributes
    RSDBCHATR------- Master Data Attributes
    RSDCHABAS------- Basic Characteristics (for Characteristics,Time Characteristics, and Units)
    RSDCHA -
    Characteristics Catalog
    RSDDPA -
    Data Package Characteristic
    RSDIOBJCMP -
    Dependencies of InfoObjects
    RSKYF -
    Key Figures
    RSDTIM -
    Time Characteristics
    RSDUNI -
    Units
    Thanks
    Reddy

  • How to find the Infoobject name by Datasource .

    Hi SAP Gurus
    Can any of you guys suggest how to find the list of Info objects for the Datasources .
    I have a scenario where I have a list of Datasources (400) which are Text and Attr Datasources,
    for which I need find the list Info objects,
    so can you please tell me is there any way that I can find the List of Info objects.
    Thanks

    Hi Rahul,
    You can make use of RSOSFIELMAP for your requirement.
    Go to Se16----->rsosfieldmap.
    You can see several fields as selections among them you could find Info object and Field selections as well.
    If you give infoobject name in selection, it will display all the data sources where it is available.
    If you give Filed also it will display the same.
    If you want to maintian document do Top Down Analysis from Bw stand right from Data target-->update rule--->infosource
    Hope this helps
    SujanR

  • How to find table & fields of standard InfoObject?

    Hi
    How to find table & fields of standard InfoObject for creating generic DataSource?
    e.g. I want to know the table & field of 0MAINTPOS infoObject.

    You can get the list of tables involved in a particular DS by using the below method ( this another approach)
    --> RSA3 -- enter your DS ( execute later)
    --> Goto Tcode ST05 --> switch on the SQL Trace
    --> now execute the extract checker in RSA3.once done switch off(deactivate) the SQL trace.
    --> in st05 screen you can find the button "Display Trace" -- execute (here make sure SQL trace button is enabled.
    --> from the menu bar -->Trace list-->  select "combined table accesses".
    --> it will display the tables involved in it -- check for TABLE names section.... select that row Table names -- click on filter button --press F4 -- here we go it will display the list of entire tables involved in the extraction activity... here you need to sort the tables which are related to your DS.

  • How to find out important fields in table like MARA?

    How to find out important fields in a table for example like MARA?
    Details: In R/3 or ECC table for example MARA;
    1) How to find out what are the important fields?
    2)Does the table have only key figures not characteristics right?
    3) There are so many tables in FI; Can you please tell me what are the important tables?
    4) There is any easy automatic way to figure out that the particular datasource for example 2lis_02_item is pulling data from so and so table. I like to know the process not the results please.
    Thanks in advance.
    York.

    Hi York,
       Let me go by points:
    1. There is nothing like important fields ... The question could be Key fields ... the fields which identify a record uniquely ... If you go to SE11, and go inot the dispaly of MARA table ... you will see that there is tick mark under key to indicate that the field is a key field ... All the fields which are so marked would identify a record in the table uniquely. If your question is otherwise ... (Important fields) ... then it depends on the purpose you wnat to meet ... Some fields might be important for me but not for you ... so there is not hard nad fast rule for important fields.
    2. No... Tables in R/3 or ECC would contain both Key figures and characteristics.
    3. Important tables in FI would be BKPF, BSEG and BSET.
    4. The procedure for finding out which table are used by say 2lis_02_item would be different from that of other non LO/LIS extractors.
    In case of LO/LIS turn on the trace (below process) while populating the setup tables and for thoers while executing RSA3.
    1. Open one session and go to ST05, click on "Activate Trace"
    2. Open another session and execute the transaction you want to track for the tables it is going to hit.
    3. Go to the session of point 1 above and click on DEACTIVATE TRACE
    4. Click on DISPLAY Trace
    This will show you all the tables that were hit while extracting data. Point to remember here is ... it will hit some standard tables as well ... so you will have to filter out what is relevant from what is not.
    Hope this helps.
    best regards,
    Kazmi

  • How to find datasources in in r/3 for HR fileds

    Hi BW guru's
    i want extract data from these fields from r/3 to bw .
    ARBST
    WOSTD
    WKWDY
    i find teese are in PA0007 table , but i dont know which  standard datasources supports for these fields.
    how to find the exact datasource for thes fields ?
    it is very argunt...
    waiting for fast reply..
    i will assign more points for fast reply
           Thank u
            PSR

    Hi,
    I had a scenario where I was required to bring in fields WOSTD, WKWDY in BW but that doesnt come thru standard datasource. So I had enhanced datasource 0HR_PA_0 and had added these fields to it.  You would be required to write user exit code in RSAP0001 to populate those fields. Its little tricky as data is time dependent and records comes in different date ranges.
    Abhijit

  • How to find the Datasources for the given table names ?

    Hi All,
    I have an urgent requirement where I ned to find the names of BW Datasources, created for the given table names.
    Both the tables and Datasources are in BW system only. I can see the table in SE11 but I am unable to find its associated Datasources in the 'Where Used List'.
    Is there any method ?
    Will assign points to satisfactory answers.
    Regards,
    Srinivas

    Hi,
    Check this thread on how to find the DS.
    I have the field name, please help me find the data source.
    Once you identify your DS you find which all Data targets are fed by trying to see the " Show data flow" in RSA1 for this data source.
    Hope this helps.
    Thanks,
    JituK
    Edited by: Jitu Krishna on Apr 30, 2008 11:52 AM

  • How to find conversion exit MATN1 for the field MATNR

    Hi Friends !
    I want to run the infopackage with selection on material. But when put some value in the infopackage selection screen, it says "cannot find conversion exit MATN1 for the field MATNR".
    Ques is how to find where this conversion exit is written? Will it be written in ECC side or BI side?
    Source System Datasource : 0MAT_SALES_ATTR
    InfoObject in BI : 0MAT_SALES
    With Regards
    Rekha

    HI ,
    It will be available in the BI system itself as FM , you can find them in TCODE : SE37 --> provide the converstion exit name
    with star on both sides like MATN1 and press F4 key , every convertion exit will have two FM s , one for INPUT and
    one for OUT put , you can try the Test Run ofFM to check how it works
    For MATN1
    CONVERSION_EXIT_MATN1_INPUT
    CONVERSION_EXIT_MATN1_OUTPUT
    Regards,
    Sathya

Maybe you are looking for