Fields missing while printing crystal reports !!

Hello everyone
I have a crystal report application in VB.NET 2005, which gets the values of a field from the database and supports printing of the report in the following formats
1. pdf
2. directly to a printer - printout
When i export the report using reportdocument to pdf , all the fields are getting printed : Normal - As expected
But when i print the report directly using PrintToPrinter method,i am not able to print some of the fields. i.e some of the entries are missing in that report printout
Can someone guess what could be the problem ???
Are there any limitations / preconfigurations that needs to be done apart from setting page size,margin before using the PrintToPrinter method
Regards
Srivatsa

OK, a few incongruencies here:
I'm using the version of the Crystal Reports that ships along with the Visual Studio.NET 2005.
- that would make is CR 10.2
We have also tried applying the latest service packs crxir2_sp4_full_build
- So SP 4 for CR XI release 2 would not do you much good as per above (if you are indeed using CR 10.2(?))
- How did you get to the crxir2_sp4_full_build? This is in a gated section of the SAP website. The only publically available SP 4 for CR XI r2 is "incremental... If you did apply crxir2_sp4_full_build, then you are working with CR XI r2 now...
The behavior is seen in the web application and the behavior is seen both in the dev and deployment system.
- So this does not work anywhere? If so, why bother going to deployment?
Also i tried exporting to pdf soon before / after printing. But the fields are present in the pdf and not on the printouts
- Confirm that you do see the fields on an exported PDF and when you print the PDF you get a blank printout?
More clarification needed:
We need to be absolutely clear on what version of Crystal Reports you are using. Open your .NET project, go to your references and look for CrystalDecisions.Crystalreports.Engine.dll. What version is this assembly?
Also, please answer the rest of the questions above.
Ludek

Similar Messages

Print crystal report in A5 paper tray

Dear Experts,
I am using VB.NET
We have different printers like "Lexmark Optra T612_DB", "HP Universal Printing PCL 5 (v4.7)", etc., in the network, there will be 2 or more trays for each printer. One of the tray has A5 paper in it. While printing Crystal report,
1. How to find in which tray A5 paper is present?
2. How to select A5 paper tray for printing?
If the above 2 are not possible with crystal report object:
1. How to print crystal report using PrintDocument object?
2. How to find in which tray A5 paper is present using PrintDocument object?
3. How to select A5 paper tray for printing? using PrintDocument object?
Currently with the following lines of .NET code, it is always printing in Tray 2
report.PrintOptions.PaperSize = PaperSize.PaperA5;
report.PrintOptions.PaperOrientation = PaperOrientation.Landscape;
Regards,
Eswar

Unfortunately, it will be up to you to find out what tray the correct paper size is in, then set that to the report. The CR APIs do not look up these values, they just expect you to know these and set them.
Ludek

Error While Printing the Report

Post Author: saqib
CA Forum: .NET
HI All,I have joined this forum recently. I found this forum so helpful. I have one query which is: I am using crystal report 10 with Dot Net 1.1, I have created one web report which consists of 19 pages. Once i press the print button on the report after previewing it shows me the error reporting screen of windows. I have checked in event viewer it gives me the following error detail:The description for Event ID ( 1000 ) in Source ( Microsoft Internet Explorer ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. The following information is part of the event: iexplore.exe, 6.0.2800.1106, printcontrol.dll, 10.0.0.533, 0003bb45. Can any one helps me as i am totally stuck in that. Thanks in advance.

Try the following if your printer is a network printer
1. Add Printers - select Local Printer
2. In the Add Printer wizard, select "create a new port" option and select "TCP/IP" as type
3. Write the IP address of the network printer in the "Add standard TCP/IP Printer Port wizard". The port name becomes IP_<ip addr>. Click Next.
4. Select the printer and printer type in "Add Printer" wizard.
5. Select a driver and Write a printer name. This completes the setup. Use this printer name to print from Oracle reports.
Hope this helps..
Yogesh
I am getting this error message while printing the report on Network Printer.
"REP-1849: Failed while printing"
Reports Server is not installed on my machine.
On shared printer, it has no problems.
Platform is Win2000. Report Builder 6.0.8.11.3
Plz help !
Thanks in advance !

Print crystal report without preview

Dear All,
i want print crystal report without preview.
when i click print button i want show printer list install in that computer.
so user can choose which printer that use to print. I means like if we printing document from office, we can choose the printer.
how that i can do that?
please help.
best regards,
Surbakti

Since this issue has little to do with sql server, I suggest you post your question to a forum for CR
SAP CR community

Help needed while exporting crystal reports to HTML file format using java

Help needed while exporting crystal reports to HTML file format using java api(not using crystalviewer).i want to download the
html file of the report
thanks

the ReportExportFormat class does not have HTML format, it has got to be XML. Export to HTML is available from CR Designer only.
Edited by: Aasavari Bhave on Jan 24, 2012 11:37 AM

Unable to print crystal report over web using ActiveX Control

Post Author: jimmyp
CA Forum: General
We have a problem with printing crystal report over web using ActiveX Control. When clicking print button, it only shows a blank dialog web crystal viewer page without any error. The page just simply hangs. We installed the PrintControl DLL and enable all the security setting for ActiveX Control for IE. It still does not print. Does anyone know why?
Environment.
Bundle Crystal Report v10
Asp.net 2.0
IE 6.0 or higher.
Appreciate for your help.
Jimmy

Post Author: Ian Kulmatycki
CA Forum: General
A team member here found this, I haven't read it, I'm not sure if our problems are related to this, but hopefully it helps someone:
-ian
When Secure Sockets Layer (SSL) is enabled, using the ActiveX control to print reports from a Crystal 10 DHTML viewer results in the following error message:
"A communication error occurred, printing will be stopped."
How can this error message be resolved?
Resolution
This is a known issue with Crystal Reports 10 and Crystal Enterprise 10 viewers and has been tracked. The Track ID is ADAPT00282199.
This error occurs due to the receiving application performing a case-sensitive check for the HTTPS request header value "ON". When a sender application sends the value as "on" in lower case, the error occurs. The update below changes the receiving application to be case-insensitive.
Hot Fixes or Service Packs address this issue as indicated below. With the updates, this issue is resolved.
Unless indicated otherwise, Weekly Hot Fix updates from our FTP site have only been tested with English versions of products.
For Crystal Reports 10 and Crystal Enterprise 10, the update for this issue is included in the Crystal 10 Viewers Weekly Hot Fix (WHF). This is available in English only at the following location:
ftp://ftp.crystaldecisions.com/outgoing/EHF/viewers10win_en.zip
This issue is addressed in the following components (and later versions):
PageObjectModel.dll, version 10.0.5.785, dated 8/25/2004
ReportRenderer.dll, version 10.0.5.785, dated 8/25/2004
WebReporting.dll, version 10.0.5.785, dated 8/25/2004

Problem in printing Crystal Report from SAP Business One - the printing cut in it width margins

Hi
i'm trying to print crystal report layout from sap b1. when i preview the report as pdf file, i have the option to choose Fit in size option and then the layout print O.k with out any margins that been cut.
The problem start when i'm trying to print the layout directly from sap b1 (printer button) which cause the page to be cut in it width margins.
How can i control the printing of crystal layout when i'm printing it directly from sap b1? do i have the option to chose 'Fit page size' from sap system?

Hi,
Please check SAP note:
1820939 - Page settings of Crystal Reports not transferred
correctly
Thanks & Regards,
Nagarajan

Invalid Key code Error while installing crystal report server 11

While installing crystal report server 11,i am facing an erro which says Invalid Key code Error.I had raised this issue to SAP customer support and attaching the conversation that we had.PLEASE HELP me to resolve the issue.
MAILS--Dear Mohit,
Thanks for the patience.
We have received the below update from the Licensing Team.
You received your permanent key in respect of these licenses - the key is for Crystal Reports Server XI.
You did not purchase these licenses for Crystal Reports Server, but purchased it for Crystal Reports and a 5-named user license for Crystal Reports was included as a special offer. The software included was version XIR2, but you elected to use version XI instead and received key .
You would need to enroll the licenses in maintenance if you want to upgrade them.
In case of any queries please create a ticket via the Service Market Place.
Regards,
Jessy
Customer Interaction Center
SAP Active Global Support
Hello Jessy,
The customer received their permanent key in respect of these licenses - the key is for Crystal Reports Server XI.
They did not purchase these licenses for Crystal Reports Server, they purchased Crystal Reports and a 5-named user license for Crystal Reports was included as a special offer. The software included was version XIR2, but they elected to use version XI instead and they received key .
They cannot decide to upgrade now - they must enrol these licenses in maintenance if they want to upgrade them.
Kind regards,
Rosemary
From: BOSAPASIA
Sent: 29 September 2009 05:49
To: Savage, Rosemary
Subject: FW: Crystal Reports Server Installation Issue
Importance: High
HI Rose ,
Need your assistance on the below issue.
Customer purchased Crystal Report Server XI R2 in 2005. When he is trying to install it now, he is getting an Invalid Key code Error.
He has provided us the Scanned copies of the Key code and the registration number.Can you please help and check if he can be provided with a Keycode.
Regards,
Jessy
CIC Team Lead
Customer Interaction Center
Global Support Centre India
SAP Labs India Pvt Ltd
Hi,
Providing you with the required details to proceed further
Registration Number-
Registration Email Address-taxmantra.support
And also please find attached the scanned copy of the Registration key we got for the Crystal report server.
Dear Mohitk,
Thank you for your information.
I checked with the concerned colleague and received the below update:
Please check from where you got this key code. If from a paper, please scan it to us. Please let them track to the original paper or email.
If you have registered the key code, please provide us the registration number or registration email address so that we will try to check for you.
If you did not register before, as the promotion is over so the key code could not be replaced.
I request you to kindly check the same at your end and revert with the details.
Moreover, there are two ways for Crystal Report customer to get support.
One is customer with bundled product such like BOE and under maintenance. These customers will have an S-user ID and password to log a case in service market place via http://service.sap.com/message
A learning map was provided, listed on left column.
The other is customer with only Crystal report product, the support is via SDN.
http://service.sap.com =>Crystal Reports and Xcelsius Support=>Crystal Reports and Xcelsius Forums
Customers can first check whether other customer has got the same issue and find the reply from our engineers.
You may also post your own thread for support.
Anything else I could help, please do not hesitate to contact again.
Hi,
I am providing you with the details required to resolve the issue related to Crystal report installation,for reference of the issue please refer the mail below.
Please find attached the Scanned Document containing the details as per the details required by you.
Hope to see a quick resolution for the issue.
Dear Mohit,
Thank you for your e-mail.
As discussed, I understand that youu2019ve procured Crystal Reports Server 11 in 2006. However youu2019re facing issues with key codes while reinstalling the same. We request you to kindly provide us with below details for further assistance.
Your customer number:
Your customer name and address:
Purchase order number:
Any other products purchased along with Crystal Reports Server 11
Any S-User Id:
Any old case ID:
Please feel free to contact us if any further queries.
Hi,
I am raising this concern on behalf on Taxmantra project (Tata Consultancy Services noida).
We have bought licensed Crystal Reports Server 11 near by 2006.We are trying to install the crystal server but while installing ,we have encountered with an error message that:-
"The product key code you have entered is incorrect"
We are facing the same issue in 2006,I am attaching with this email the conversations that was held in 2006 to get the correct key code.
Please help us to resolve the issue as early as possible.
My contact number:
If you need any further information do let me know

Ajit,
By design, the product is not able to be installed under the superuser account.
1. Create a new user and specify a home directory for the user without a quota set.
2. Copy or move the installation files to a directory that the new user can read. I suggest you move the installation files directly into the new user's home directory.
3. Logon as the new user (or su - newuser)
4. run the installation shell script using that new user's account.
NOTE: Ensure the system meets the requirements from the supported platforms documents.
.Tony

Error message when trying to view/print Crystal reports in B1

I get the following Error message when trying to view/print crystal reports in SAP B1/Crystal Reports Integration Tool for SAP Business One:
" Could not load file or assembly 'Crystal Decisions Windows Forms, version=12.0.2000.0, Culture=neutral, Public Key Token=692fbea551e1304' or one of its dependencies. The system cannot find the file specified. ????

Hi
Common issues for this :
1. Once you install crystall add on ,you need to go to Crystal report Administration >Account setup .
Put on the user name and password and click on creating ext tables
Try then running the report .
If not the case ,
make sure you install runtime .
You need :
1.Crystal report basic from SAP download -(Not necessary if you want only report viewer >
2.You need to have crystal integration addon (I think service pack is SP1)
3.Make sure you have runtime install
When you are installing ,make sure you restart your PC before you do or remove temporary file s
Hope this solves your issue
Bishal

Database Error While Viewing Crystal Report In Infoview

Hi,
BO and Crystal Designer version is BO XI 3.1 SP2 FP2.6.
Issue:
While viewing crystal report for a particular user id in infoview, following error is coming:
Error in File EPACertificate.rpt: Database Connector Error
However, we are able to view the report in thick client Crystal Designer using same user id. This issue is occurring only for this user and rest of the users are able to view the report in Infoview and Crystal Designer.
It would be great if any of you can provie a solution to this issue.
Thanks in advance,
Jaya

closing it.

Error While running crystal report

Dear All,
i have some crystal reports in SAP.while opening any crystal report its through some error like "Error While running crystal report ".
Kindly suggested me how to do this .
Thanks&Regards,
P.Pratap

Hi All,
Thanks for your reply,
already i close this Issue.
they have one addon for crysatl report .so it show error like Error while Running crystal report
thanks&Reagrds,
P.Pratap

Error 1305 while installing Crystal Reports 2008, JavaSDK

While installing Crystal Reports from the original media on a new Lenovo Thinkpad running Windows XP Pro SP3 I get the following error while installing:
Error 1305: Error reading from File: c:\program files\Business Objects\javasdk\jre\audio\soundbank.gm. Verify that the file exists and that you can access it.
I have the option to retry or cancel, obviously cancel exits the installer. Retry just fails again. I have tried to access the file (which does exist) and I cannot because it is in use. I used Sysinternals process explorer to find out what has the file in use and it is msiexec.exe which is the Microsoft Installer service which is running in order to install CR2008.
I have tried restarting, setting permissions on the file and folder, uninstalling and reinstalling Java VM from Sun. I even tried killing msiexec (which killed the install). I even tried taking out all reference to java in a custom install.
I am at a loss on what to do next. Any help would be appreciated.
-Michael

I found that if I installed it from a copied local directory instead of the CD Rom that it worked

Getting Error while integrating Crystal reports with Java

Hi All,
I am getting below error while integrating crystal report with java
[java] os.arch = x86
[java] java.lang.NoSuchMethodError: com.crystaldecisions.Utilities.d.<init>
(Ljava/awt/Image;I)V
[java] at com.crystaldecisions.Utilities.af.try(Unknown Source)
[java] at com.crystaldecisions.Utilities.af.a(Unknown Source)
[java] at com.crystaldecisions.Utilities.af.<init>(Unknown Source)
[java] at com.businessobjects.crystalreports.viewer.applet.g.a(Unknown
Source)
[java] at com.crystaldecisions.ReportViewer.ReportViewer.start(Unknown
Source)
[java] at ReportViewerFrame.<init>(ReportViewerFrame.java:51)
[java] at JRCViewReport.launchApplication(JRCViewReport.java:29)
[java] at JRCViewReport$1.run(JRCViewReport.java:50)
[java] at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:
178)
[java] at java.awt.EventQueue.dispatchEvent(EventQueue.java:443)
[java] at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDi
spatchThread.java:190)
[java] at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDisp
atchThread.java:144)
[java] at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.j
ava:138)
[java] at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.j
ava:130)
[java] at java.awt.EventDispatchThread.run(EventDispatchThread.java:98)
Any help can be appreciated
Kalyan

Hi All,
For got to mention i am using crystal reports XI release 2 with JDK1.4.
Kalyan

Printing Crystal reports via Great Plains 10

Hi,
I am unable to print (to printer) crystal reports in Great Plains 10. I can preview the report, export and print the exported file but the Print button does not respond when I click it (no errors, nothing) in the Crystal preview screen. We are using Crystal XI, Developers Kit.
I have set the report to 'No Printer', verified that I can print other files from the server, verified the default printer and I have spokes to GP (Microsoft), nothing has helped with this issue.
OS:
MS Windows Server 2003
Standard Edition
SP1
Thanks,

Hi Carolyn,
Great Plains is an OEM partner of ours and they MUST resolve this issue for you. If they can not figure out what the problem is they can create a case on line to get help from Support to help you.
Not sure if you have Crystal Reports Designer or not but if you do can you print from the Designer? If you can then it's an issue in Great Plains software.
Thank you
Don

Error While Using Crystal Report and Its Print SAP Business One

Hi Experts,
I am using SAP Business One 8.82 PL 11. On my Server there is a problem in Crystal Report tool.
When I am trying to see preview and tried to get print of any Crystal report layout It gives me error "Unknown Database Connector Error"
Please give me solution on same ASAP.
Also I have attached Screen shot of error.
Thanks.
Ajit.

Hi Ajit,
Please repost to the SAP B1 space.
-Abhilash

Fields missing while printing crystal reports !!

Similar Messages

Maybe you are looking for