File Adapter Best Effort...how come?

Hi !
While reading the File Adapter online documentation, it says that it supports Best Effort as QoS...?? I though that QoS = BE is for synchronous interfaces...in what case the File Adapter could work in sync mode?
Tnx,
Matias

Matias,
A classical use case of when you can use a QOS of BE in the file adapter is,
https://forums.sdn.sap.com/click.jspa?searchID=3084724&messageID=3075228
If you look into my response in this thread, the RequestResponseBean is used to change the QOS of file adapter from EO to BE . If you select the QOS as BE in the File Adapter you need not use this module.
Have not given this a shot though!
Regards
Bhavesh

Similar Messages

Sender File Adapter Conversion problem - how to start new recordset?

Hi guys!
I have a source file like following:
aaaakkkkkk
uuuupppppp
&&hhhhffffff
6666uuuuuu
3333rrrrrrrr
&&kkkkoooooo
which means - fixed length 4,6 and && starts new recordset.
I need to get structure like:
<recordset>
<item>
 <a>aaaa</a>
 kkkkkk
</item>
<item>
 <a>uuuu</a>
 pppppp
</item>
</recordset>
<recordset> ... with h,f and 6,u </recordset>
<recordset>
<item>
 <a>kkkk</a>
 oooooo
</item>
</recordset>
Any ideas?
Let's say, I can add && on the beginning of the file and other "lite" changes... but structure stays the same...
so, how to start new recordset? with which conversion parameter? for items it is clear...
Thanx a lot!
Olian
Message was edited by:
 Olian Saludew

aaaakkkkkk<end_of_line>&&uuuuwwwwww<end_of_line>...
then normal parameters should work fine,
item.fieldFixedLengths==4,6
Item.fieldNames=field1,field2
item.endSeparator=<end_of_line>

I did subscribe fr one year but I have difficulty to convert my PDF file in word. How come?

I did subscribe and when I try to upload a PDF file for convertion I got an answer that the file do not exist.

Hi cesare,
I see you have had your ExportPDF subscription for a couple years now! That is wonderful to see, thank you.
Has this issue happened before when you have converted PDF's to Word or Excel?
Is the file extension properly placed? Example: .pdf, .docx, .exe.
Let me know so I can assist!
Kindest regards, Stacy

Unzip attachment in Mail adapter or/ File Adapter

Hi everyone,
I need to get flat file from .zip attachment that comes with mail? Is it possible to get it with Mail adapter, unzip it and then make conversion? All steps in the Integration engine?
Another option can be get .zip with File adapter, but again how to unzip it?
Thanks,any help appriciated as I am doing my first XI project.
Nataliya

>
Buffy76 wrote:
> Thanks a lot, guys. Unzipping is clear now.
>
> Prateek, it would be great if you can you point to "how-to" file or example for MessageTransformBean.
>
> Regards,
>
> Nataliya
ref this https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/9e6c7911-0d01-0010-1aa3-8e1bb1551f05

Error4050 in File adapter

I am trying to send a file to XI engine at port 8080 and I am getting this log in my File adapter.
13:51:06 (4023): File adapter initialized successfully
13:51:06 (4007): File adapter started
13:51:31 (4050): ERROR: Unexpected exception "java.lang.NullPointerException" occurred
Please let me know how I can overcome the error 4050. I could see the service active in SMICM transaction. Please let me know.
Thanks
Here is my adapter config info.
file adapter java class
classname=com.sap.aii.messaging.adapter.ModuleFile2XMB
mode=FILE2XMB
Integration Engine address and document settings (example, see docu)
XMB.TargetURL=http://doiweb03:8080/sap/xi/engine?type=entry
XMB.SenderBusinessSystem=XD1
XMB.SenderInterfaceNamespace=http://www.doi.gov/FBMS/FileTOFile
XMB.SenderInterfaceName=OutMI
XMB.ReceiverBusinessSystem=RD1_CUA
XMB.Client=100
XMB.Language=English
XMB.User=ZFILEADPTR
XMB.Password=***********
XMB.ContentKind=T
XMB.ContentType=text/plain
XMB.QualityOfService=EO
ftp.host=10.192.32.200
ftp.port=21
ftp.user=XIDEMO
ftp.password=*****
ftp.connection=perFileTransfer
ftp.mode=Text
##File Adapter specific parameters (example, see docu)
file.sourceDir=/data
file.sourceFilename=.
file.processingMode=archiveWithTimestamp
file.archiveDir=c:/temp
file.pollInterval=10
file.processingLocked=YES

Hi Ramesh,
Are you sure the XI port is 8080 instead of 8000 (check it in xi config)?
Since you are sending a file to XI, the sender system is the business system name defined in SLD for your file adapter, not the XI name (XD1).
Hope this helps.
Hart

File-Adapter J2SE

How can i get the XSLT code from xi, it is possible?
Thanks
Yves

Yes that is right!
I try ist, but it does not work!
Here the structure of the sender in XI in XML:
<?xml version="1.0" encoding="UTF-8"?>
<ns:PlaintMaintenanceMessagetype xmlns:ns="http://doehler.com/sapxi/krausdemosender">
<Data>
 <item>
 <EpuipmentID>1234</EpuipmentID>
 <FunctionalLocation>Limo</FunctionalLocation>
 <Data>20060105</Data>
 <Time>sdf</Time>
 </item>
 </Data>
</ns:PlaintMaintenanceMessagetype>
an this is the structure of the J2SE-File-Adapter:
file adapter java class
classname=com.sap.aii.messaging.adapter.ModuleFile2XMB
version=30
mode=FILE2XMBWITHSTRUCTURECONVERSION
#mode=FILE2XMB
Integration Engine address and document settings (example, see docu)
XI.TargetURL=http://dauxsaph.da.doehler.com:8000/sap/xi/engine?type=entry
XI.User=******
XI.Password=*****
XI.QualityOfService=EO
XI.SenderParty=
XI.SenderService=Plant_Maintenance_Sender
XI.ReceiverService=BW1CLNT001
XI.Interface=PlantMaintenanceMessageInterface
XI.InterfaceNamespace=http://doehler.com/sapxi/krausdemosender
file.sourceDir=C:/temp_bw
file.sourceFilename=fehler*
file.processingMode=delete
#file.retryInterval=20
file.pollInterval=5
##File Adapter specific parameters (example, see docu)
#file.type=BIN
file.type=TXT
#file.type=XML
file.encoding=UTF-8
xml.documentName=<ns:PlaintMaintenanceMessagetype xmls:ns="http://doehler.com/sapxi/krausdemosender">
#xml.documentName=http://doehler.com/sapxi/krausdemosender
xml.recordsetName=Data
xml.recordsetStructure=item,1
xml.item.fieldNames=EpuipmentID,FunctionalLocation,Data,Time
xml.item.fieldSeparator=,
#xml.keyFieldName=EquipmentID
#xml.keyFieldType=CaseSensitiveString
#xml.item.keyFieldValue=1234.
but it does not work why?
thanks yves
Message was edited by: Kraus Yves

Unable to clone File Adapter receiver channel for parallel processing

Hi Experts,
I am using variable substitution for File - RFC - File with out BPM scenario(using request response, oneway bean).
While i placed the file in the sender FTP folder, the file didnt get picked up, but in communication channel monitoring, i am getting error ' Unable to clone File Adapter receiver channel for parallel processing'.
Can anybody provide me suggestions to solve this error.
Note : without variable substitution , the interface is working good.
Is it due to, i am trying the source structure field in response file adapter?

Hi,
In your CC, do you use some additional paramaters ?
like these one of point 47/48 of [Oss note 821267 - FAQ: XI 3.0 / PI 7.0/ PI 7.1 File Adapter|https://service.sap.com/sap/support/notes/821267]
Maybe there is conflict with a parallel connexion and the bean used to do asynch-synch bridge...
Mickael

Error in Receiver File adapter using File content Conversion

Hi,
I am getting the following error in the receiver file adapter.
Conversion initialization failed: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Parameter 'statement.fieldFixedLengths' or 'statement.fieldSeparator' is missing
I am using the below parameters for FCC:
Recordset Structure - statement
statement.endSeparator - 'nl'
statement.fieldSeparator - '0X09'
statement.fieldNames -xblnr,wrbtr,newbs,kostl,newko,prctr,xref1,rke_wwfud,rke_wwst3,blart,bukrs,bldate,budat,gjahr,monat,ctype,waers,bktxt,posnr,wbs_element,mwxkz,businessplace,businessplace,c_waers,c_wrbtr,g_ctype,g_waers,g_wrbtr,h_ctype,h_waers,h_wrbtr,trade_id,lob,sgtxt,zuonr,reason_rev,ldgrp,tcode,lifnr
ignoreRecordsetName - true
Please let me know where i am going wrong.
Thanks,
Aparna

Hi Aparna,
I feel the problem in your content conversion parameters is with
statement.fieldNames and ignoreRecordsetName
When you are confirguring receiver file adapter for file content conversion the above one is not required. Please refer below link for details on configuring content conversion in file adapter
[http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/frameset.htm]
Hope this helps !!
Regards,
Amit

File Adapter use in BPEL

Hi All,
Can you please share some useful information on File Adapter? Is it possible to make use of 2 or more file adapters in a single BPEL Process.
Scenario is:
First to read a file from one location.
Has to place the reaqd file in a different location.
Club this file with other file in a differnt location, and put that clubbed/merged file in a different location.
EX: Read from A
Write to B ( Read another file in B and merge the file A content with in it)
PLace the (A+B) file in location c with in a different Location.
Is it possible to read or write a file of size more than 10 MB, how much size does a File Adapter supports? how to read or write files of more size ( more than 10 MB Size)?
Edited by: user12679330 on Aug 3, 2010 5:35 AM

hi',
Read file1 copy the contents to temp_file1, then write that to locationA, in the same process do a synchronous read for file2 and copy the contents to temp_file2, now while writing the file back with contents (file1+file2) you will require a new XSD which will have mapping for both the file elements, and then you can pass the value of temp_file1 and temp_file2 to this file adapter.
-Yatan

Inbound file adapter error

Hi,
I have inbound file adapter and when i run the test, the XML message displays the following error
HTTP_STATUS_CODE_NEQ_OK
HTTP status code 401 : Unauthorized
please do help me .
thankx

Hi,
Yes, i m using standalone xi2.0 , the configuration code is as below
file adapter java class
classname=com.sap.aii.messaging.adapter.ModuleFile2XMB
mode=FILE2XMB
Integration Engine address and document settings (example, see docu)
XMB.TargetURL=http://<host:port>/sap/xi/engine?type=entry
XMB.User=XIAPPLUSER
XMB.Password=XIPASS
#XMB.SenderBusinessSystem=ExtAdapterSender
XMB.SenderBusinessSystem=b2
#XMB.SenderInterfaceNamespace=http://sap.com/xi/xidemo
XMB.SenderInterfaceNamespace=int1
XMB.SenderInterfaceName=FILEINBOUND
XMB.ReceiverBusinessSystem=b1
#XMB.ContentKind=B
XMB.ContentKind=T
XMB.ContentType=text/xml
XMB.QualityOfService=EO
##File Adapter specific parameters (example, see docu)
file.sourceDir=c:/temp
file.sourceFilename=test.txt
file.processingMode=archive
file.archiveDir=c:/temp_archive
file.pollInterval=0
##xml conversion properties if mode FILE2XMBWITHROWCONVERSION specified (example, see docu)
#xml.fieldFixedLengths=15,25
#xml.processFieldNames=notAvailable
xml.fieldSeparator=~
Please let me whether this is correct or im missing some configuration.
thankx

How to set DEBUG severity for File adapter in J2SE AE

Hi,
Can anyone help me in setting the severity level to DEBUG for file adapter?
I have tried to set in logging.properties file as given below,
formatter[Trace]         = TraceFormatter
formatter[Trace].pattern =%24d [%t] %-6s %l - %m
log[Trace] = FileLog
log[Trace].pattern     = swb_%g.log
log[Trace].limit     = 2000000
log[Trace].cnt          = 5
log[Trace].formatter     = formatter[Trace]
com.sap.aii.messaging.adapter.severity = DEBUG
logging components
#com.sap.aii.axis.logs = +log[Trace]
#com.sap.aii.axis.severity = DEBUG
#org.apache.axis.logs = +log[Trace]
#org.apache.axis.severity = DEBUG
Please correct me if I have did anything wrong and sugest me hot to set the DEBUG level as soon as possible.
Best Regards,
Soorya

Hi Sejoon,
when we changed the host of XI server in one of our projects one of the things we had to change was the exchange profile entries
http://server:port/exchangeProfile/index.html
to see how your adapter engine is configured
http://server:port/sld
SLD -> Content Maintenance
then
Subset: landscape description
Class: XI Adapter Framework
buth check the exchange profile entries first
Regards,
michal

How to handle large data in file adapter

We have a scenario Proxy -> PI -> File Sever using File adapter.
File adapter is using FCC for conversion.
recently we had wave 2 products live and suddenly for this interface we have increase in volume of messages, due to which File adapter is not performing well, PI goes slow or frequent disconnect from file server problem. Due to which either we will have duplicate records in file or file format created is wrong.
File size is somewhere around 4.07 GB which I also think quite high for PI to handle.
Can anybody suggest how we can handle such large data.
Regards,
Vikrant

Check this Blog for Huge File Processing:
Night Mare-Processing huge files in SAP XI
However, you can take a look also to this Blog, about High Volume Messages:
Step-by-Step Guide in Processing High-Volume Messages Using PI 7.1's Message Packaging
PI Performance Tuning Best Practice:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2016a0b1-1780-2b10-97bd-be3ac62214c7?QuickLink=index&overridelayout=true&45896020746271

How to use File Adapter in BPEL

Hi,
How to use File Adapter in BPEL. I am using Oracle SOA 10g. Any sample or best example in blog or elsewhere ?

Hi,
Please check the below links for samples on how to use file adapter in BPEL (in 10g/11g usage is same) and let me know any further queries.
11g - http://blogs.oracle.com/theshortenspot/entry/soa_suite_integration_part_3_l
10g - http://erpschools.com/articles/bpel-file-adapter-tutorial

How come pages won't open PDF files made by Pages?

How come pages won't open PDF files made by Pages?
I have files I made with Pages and exported as PDF but I can't open them with pages to edit?
Also, where are the recent files created by pages located? Can't find those to open either..

Hi Tom,
I was delighted when I signed up for Pages. Clunky yes, but it worked. I've been a graphic designer on a Mac for 25 plus years and have logged too many horror stories of "upgrade" wars which cost me massive lost time, data and money forcibly extracted just so I could finish a project.
When I first used Pages in April of 2012? or there about, I was able to open Word documents exported to .pdf format, emailed to me, which I then dragged into Pages. I could make the changes I needed to make, export as a .pdf, return it back to my client which they could then edit on whatever it was they were using. I'm not a neophyte with this. I've had Original Photoshop as a stand alone, Quark (which locked users out 6 months after I purchased it.) Quark again, Freehand, Pagemaker, Illustrator, Photoshop again, Creative Suite for several upgrades, Acrobat Pro. 2 years ago I lost 6 years of Quicken data and had to and "upgrade" start over. This last go around I had to "upgrade" my Apple ID - yes I had 2 on purpose, lost my Pandora One and my ability to get into the Tulsa County Library website.
At this point, I'm retired and feel like what I've paid for in the past should WORK today. I have a 100+ page cookbook in Quark which I was able to export as a .pdf, that I've lost the tags too, Easier to start over. I have artwork that is hundreds of megs in Photoshop. Not the least bit interested in anybody's "cloud".
Thanks for letting me vent. I'm determined to keep my equipment and software up to date so I can enjoy the skills I've acquired, but I completely cringe at Apple's antics. I truly hate it when I have to respond to some new "tip" or product offer. BooHiss. Happy Turkey Day. Pages is a "turkey" program.
Best regards, mbd

How to write ModuleData process exit bean in the sender file adapter

Hi all,
I am referring to this blog:
/people/sap.user72/blog/2005/07/31/xi-read-data-from-pdf-file-in-sender-adapter
Can any one come across this situation like reading a PDF file and converting it to XML using XSL-FO. I am using NWDS, and selected Java Project and added libraries specified in that blog. I am in total confusion as what type of Project i should select. I need a step by step procedure for developing XML file out of PDF referred in that blog..Thanks a lot
regards,
Ganesh

Hi Ganesh,
the how to on Adapter Modules in also available in SDN Libraray.
Check this,
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3bdc14e1-0901-0010-b5a9-a01e29d75a6a">How to create Modules for the J2EE Adapter Engine</a>
Regards,
Bhavesh

File Adapter Best Effort...how come?

Similar Messages

Maybe you are looking for