File attachment problem when posting the email

Hi all,
I have some problems here with the email posting. When i send the email with text attachment and I view in the SOST is correct. But after i sent it through the SCOT, the attachment that receives by receiver becomes PDF. Can somebody tell me what the problem?
Thanks a lot..
Best regards,
Hongster

Hi weihong,
1. This automatic conversion
text---> pdf
is done by scot settings.
2. We can modify that setting. Pls consult ur basis team for that.
3. after that, the text file will go as it is.
regards,
amit m.

Similar Messages

TS5179 I've been bitten by the "Missing MSVCR.dll file" problem when downloading the latest iTunes update (PC w/ Win-7 & Outlook-2007#. 'Have followed Apple's instructions of un-installing all Apple software, and re-installing it. #out of space...??)

I've been bitten by the "Missing MSVCR.dll file" problem when downloading the latest iTunes update, 11.4.62 (on a PC w/ Win-7 & Outlook-2007#. 'Have followed Apple's instructions of un-installing all Apple software, and re-installing it (Ugh). First result Outlook couldn't find my 1,385 item contact file in iCloud, although the outlook distribution lists were there. Second result, upon installing iCloud again, I have two iCloud contact files shown in outlook - "iCloud" & iCloud, within iCloud". 1,332 & 1,385 contacts respectively.
Plus an iCloud installation error message saying iCloud moved 6,835 files to a "deleted items folder" somewhere. This is NOT fun at 72-yrs old...!!
So, how do I make sure I haven't lost anythying from Outlook?   Russ-AZ

Interesting response, Kappy - Back to original post: "First result: Outlook couldn't find my 1,385 item contact file in iCloud, although the outlook distribution lists were there (therefore, initially I had lost my contact file from Outlook). Second result, upon installing iCloud again, I now have two iCloud contact files shown in Outlook - "iCloud" & iCloud, within iCloud". W/ 1,332 & 1,385 contacts respectively.
Plus an iCloud installation error message saying iCloud moved 6,835 files to a "deleted items folder" somewhere. This is NOT fun at 72-yrs old...!!
So, how do I make sure I haven't lost anythying from Outlook?   Russ-AZ"
You can safely assume that I have tried using it!   So, to make things a little clearer:
     1) I now have two iCloud "contacts files", w/ a different total count. What's the difference? Why the different toatl count?
     2) Since re-installing the Apple software (part of the MSVCR" recovery instructions) "couldn't possible affected Outlook", why am I getting an iCloud installation error message saying iCloud moved 6,835 files to a "deleted items folder" somewhere. What's in those files? And where are they?
Probably more important questions get down to:
     3) Why is a basic Apple product upgrade "screwing-up Outlook"? This iTunes upgrade, failing to install properly forced Outlook 2007 into a 2-min start-up cycle. Which was fixed with this "Goat-Rpdeo" of re-installing MSVCR80.dll.
     4) And under the latest release of iOS-7.0.4 on our iPhones, why is Apple now forcing us to use the iCloud to back-up our contacts, calendars & tasks, vs. allowing these files to be backed-up directly on our PC's via the USB cable?
Thanks again for your interest and comments. - Russ-AZ

How to avoid the split problem when uploading the data from csv file

Dear Friends,
              I have to upload data from the .csv file to my custom table , i have found a problem when uploading the data .
i am using the code as below , please suggest me what i have to do in this regard
      SPLIT wa_raw_csv AT ',' INTO
                wa_empdata_csv-status
                 wa_empdata_csv-userid
                 wa_empdata_csv-username
                 wa_empdata_csv-Title
                 wa_empdata_csv-department.
APPEND wa_empdata_csv TO itab.
in the flat file i can see for one of the record for the field Title as
Director, Finance - NAR............there by through my code the wa_empdata_csv-Title is getting splited data as "Director, and Department field is getting Finance - NAR" , i can see that even though " Director, Finance - NAR" is one word it is getting split .
.......which is the problem iam facing.Please could any body let me know how in this case i should handle in my code that this word
"Director,Finance - NAR"   wil not be split into two words.
Thanks & Records
Madhuri

Hi Madhuri,
Best way to avoid such problem is to use TAB delimited file instead of comma separated data. Generally TAB does not appear in data.
If you are generating the file, use tab instead of comma.
If you cannot modify the format of file and data length in file is fixed character, you will need to define the structure and then move data in fixed length structure.
Regards,
Mohaiyuddin

Need advise, I have purchased compressor 4.1 to compress my movie file, particularly MKV files. Problem is, that the software freezes when trying to import the 10GB MKV. Any one that can help?

Need advise, I have purchased compressor 4.1 to compress my movie file, particularly MKV files. Problem is, that the software freezes when trying to import the 10GB MKV. Any one that can help?

Afraid Compressor won't work with MKV. If you have access to a system running an earlier version than Mavericks, and with Perian installed you can use MPEG Streamclip or Quick Time Pro to convert to a mov.
Russ

I am currently using Lightroom 5.6 and operating on a Mac with OSX Ver 10.9.5. I am receiving an error problem when doing the following - I am exporting selected photos from a particular Catalogue saved on Drive 1 to a folder created on another Drive whe

Hi, I am having a little trouble with exporting images to another drive and Catalogue and need some help if anyone can give me some advice
I am currently using Lightroom 5.6 and operating on a Mac with OSX Ver 10.9.5.
I am receiving an error problem when doing the following -
I am exporting selected photos from a particular Catalogue saved on Drive 1 to a folder created on another Drive where a Lightroom Catalogue has been created. In this Catalogue I have arranged for the images once exported to be moved to a different folder - I used the Auto Import process under the File dialogue box.
When processing the Export I receive an error message for each of the images being exported indicating the following -
Heading Import Results
Some import operations were not performed
Could not move a file to requested location. (1)
then a description of the image with file name
Box Save As Box OK
If I click the OK button to each image I can then go to the other Catalogue and all images are then transferred to the file as required.
To click the OK button each time is time consuming, possibly I have missed an action or maybe you can advise an alternative method to save the time in actioning this process.
Thanks if you can can help out.

Thank You, but this is a gong show. Why is something that is so important to us all so very, very difficult to do?

Mail will not display images with .jpeg extension. .jpg works fine. (displays in place when opening the email. What plug-in would correct this?

Mail will not display images with .jpeg extension. .jpg works fine. (displays in place when opening the email. What plug-in would correct this?

If you think you're insane now, try maintaining those pop up menus.
As far as I know, these menus have not been updated since FW 8, so
they are at least two versions old.
Save yourself a lot of grief by avoiding those menus. There are many
other products on the market which do a much better job of creating
and maintaining this type of navigation structure.
Read this link before you climb any higher on this slippery slope:
http://apptools.com/rants/jsmenu.php
There was another blog post by the fellow who originally wrote the pop
up menu feature, but I can't seem to locate it. Even he says stay away
from them.
Not the answer you probably want, but I hope it helps, nonetheless.
Jim Babbage

Error when posting the goods receipt

Hi we have recently successfuly updated 4.6 B to ECC 6.0.But when i am doing captive consumption by 949 Mvt. through process message system gives an error that
Error when posting the goods receipt
Message no. CB345
Diagnosis
With the selected process message, a goods receipt for the order was reported to the warehouse (destination ZPI1). However, an error occurred when the goods receipt was posted.
Please do needful.
Regards,
PP

Hi Daniel,
This is the first time i am coming across an issue like this.
neverthless from a logical front,
1. Remove Cost center as a valid receiver in Settlement Profile.
2. Your OKB9 setting are pretty much good. No need to worry about it. Becasue, OKB9 only will work if the system doesn't identify any other cost object. In this case Production Order is an automatic cost object which system should have taken.
3. Check the Settlement rule when you have created Production Order. It should have been MAT.
4. I hope you are creating Production Order with Material (using CO01 and not CO07)
5. Make sure in OPL8, the default rule in controlling tab is PP1.
Once all these are fine, i do not see any reason why you will get your probelm.
Please check and revert back to me if the problem still persists.
Best Regards
Surya

HAVE A PROBLEM WHEN SENDING AN EMAIL IT STATES IT DOES NOT ALLOW RELAYING

HAVE A PROBLEM WHEN SENDING AN EMAIL IT STATES IT DOES NOT ALLOW RELAYING

You have either entered the wrong SMTP server info or they have blocked the sending of e-mails from outside their network. That message indicates that you are not permitted to send through that server from the network you are using to connect.
Contact them again. There is no magic that will allow you to bypass this.

TS4002 I'm trying to create a new apple-id but when typing the email adress I want to use I'm told that the particular email adress is not allowed but when searching I can't find same being used. How do I find out where that particular email adress is use

I'm trying to create a new apple-id but when typing the email adress I want to use I'm told that the particular email adress is not allowed When searching I can't find same being used anywhere. How do I find out where that particular email adress is used so I can delete it there and use it for my new apple-id?

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Also
If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.

Hi, I m using an iPhone 4 and my yahoo push email was working just fine but for the last few days I am experiencing some problem that is the emails are not getting pushed , I have to manually fetch the mails. So what could be the reason for this....

Hi, I m using an iPhone 4 and my yahoo push email was working just fine but for the last few days I am experiencing some problem that is the emails are not getting pushed , I have to manually fetch the mails. So what could be the reason for this.....I have set the email setting to "push" mode. Moreover I can't edit the mail server address ....current it's on Yahoo SMTP server

Will it get rectified and restored...if so after how long. What could be the reason for such outage kindly share, as I am facing real problem because of this...

I have a problem when installing the Developer Suite

Hello,
I'm new to Oracle and I'm having a problem when installing the Developer Suite 10g. I have the Oracle Database 11g installed, but when I try to istall the developer, it gives me this error: "Oracle Developer Suite 10g cannot be installed into an existing Oracle9i 9.2.0.1.0 oe higher Oracle Home", Although I have installed the same thing twice before and it was working.
Please help me with this :(

Hi user;
I'm new to Oracle and I'm having a problem when installing the Developer Suite 10g. I have the Oracle Database 11g installed, but when I try to istall the developer, it gives me this error: "Oracle Developer Suite 10g cannot be installed into an existing Oracle9i 9.2.0.1.0 oe higher Oracle Home", Although I have installed the same thing twice before and it was working.What is your OS? If you are linux-unix level you are making installation wiht same user of Oracle Db11g? Did you try to create new Oracle_home and set it before start installation?
Regard
Helios

I have a problem when updated the new release of iphoto version(11 jun 2012). After that I cannot open any photo libraries and program is error.

I have a problem when updated the new release of iphoto version(11 jun 2012). After that I cannot open any photo libraries and program is error. I must to force quit iphoto window. There are any fixed bug update.

If you have no photos:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library' and start.
Regards
TD

I can't turn off find my ihone, always show "there was a problem when canceling the registration of this iphone with icloud" please help me. i can't restore my iphone before turn off find my iphone

i can't turn off find my ihone, always show "there was a problem when canceling the registration of this iphone with icloud" please help me. i can't restore my iphone before turn off find my iphone

If you are the original owner of the phone and know the Apple ID and password that were used to activate it originally, and if you have an existing backup to restore from, you can force it into recovery mode (which will completely erase it) and restore it as explained here: If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support. When you do you will encounter activation lock, and will have to provide the ID and password used to activate it originally in order to activate it again. If you can't, you won't be able to activate and use it.

I have problem when updating the latest version of Pro-X, I tried for several times, so I uninstall and re-install it. It is unsuccessful to re-install the Pro-X and it direct me to ask help from CS,also showing this message: Exit Code: 6 Please see spec

I have problem when updating the latest version of Pro-X, I tried for several times, so I uninstall and re-install it. It is unsuccessful to re-install the Pro-X and it direct me to ask help from CS,also showing this message: Exit Code: 6 Please see specific errors and warnings below for troubleshooting. For example, ERROR: DW025, DW050 ... WARNING: DW024, DW025 ..., please advice me the step to re-install the Pro-X. Thanks

Please follow Errors "Exit Code: 6," "Exit Code: 7" | CS5, CS5.5
Do let us know if it worked.
Regards
Rajshree

I have problems when using the camera on my iPhone 4S (the same for my daughter with a iPhone4) A veil around the blurred photo, a development impossible and completely unable to read the bar code or QR code. What to do?

I have problems when using the camera on my iPhone 4S (the same for my daughter with a iPhone4)
A veil around the blurred photo, a development impossible and completely unable to read the bar code or QR code. What to do?

Sounds kind of stupid, but check to make sure that your iphone case cover is not blocking the edge of the camera lens. I had a silicone case on my 3S and when it got older, it started tot slip and the edges of my pictures were blurred.

File attachment problem when posting the email

Similar Messages

Maybe you are looking for