File-File HTTP ResponseCode 500

Hi,
I am getting HTTP Response code 500 while executing file to file scenario. Here is the complete log shown in RWB.
Success Send binary file c:\xi\test\input2.txt, size 24
Success Application attempting to send an XI message asynchronously using connection AFW.
Success Trying to put the message into the send queue.
Success Message successfully put into the queue.
Success The application sent the message asynchronously using connection AFW. Returning to application.
Success The message was successfully retrieved from the send queue.
Error Setting the message status to DLNG failed, due to: Error updating status..
Error Transmitting the message using connection AFW failed, due to: Received HTTP response code 500..
Error Setting the message status to WAIT failed, due to: Error updating status..
Success The message was successfully scheduled to be resent at Sat Oct 01 02:43:09 GMT+05:30 2005.
Any help will be greatly appreciated.
Thanks
Vijay

Vijay,
Check your pipeline URL in SLD for XI business system.
it should be http://<host>:<abapport>/sap/xi/engine?type=entry
Ex: http://sapxihost:8000/sap/xi/engine?type=entry
regards
Shravan
Message was edited by: Shravan Miryala

Similar Messages

Step by step procedure for File &Http Adapter?

Hi Friends,
Could any one post the step by step procedure for File-Http Scenario.
I wanted to pick the flat file and posted to html page, i.e. user input to the browser page.
send across any documents to [email protected]
thanks in advance.
warm regards
mc
Message was edited by: John McCain
Message was edited by: John McCain

Hi John,
check this post to find many file -> * weblogs
Re: Interface
you can find more on:
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/weblogs/topic/16
this should help you for a start
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

HT202887 I want to share a file that is 500 meg (video) can this be done via cloud?

I want to share a file that is 500 meg (video) can this be done via iCloud?

yes, my kids live 30 to 50 ,lies away and my brother in law 300 miles.
You get the ip address of the TC using airport utility. Don't use the local lan number such as 10.0.3.12
Using the Finder go to the top of the Desktop and select Go then connect to server, type afp://that ip number , leave the user name alone and type in password. The TC hard drive should show on the Desktop.
You have to set it up first using Airport Utility: launch it and go to the Disks tab. Check box enable file sharing and share disks over wan, choose secure disk with a password and type in your password. The other person will need to know the password.
You can now copy files over to the TC i.e. upload and download files.

ResponseCode=500 ResponseMessage=Server Error

Can HTTP GET many files, large and small, binary and ASCII, from Sun ONE software virtual server, but any attempt to HTTP GET an EXE file, regardless of size, results in ResponseCode=500, ResponseMessage=Server Error. Cannot find anything in Virtual Server setup to pick what kind of files can be downloaded (or not). What might be causing this error? Thanks.

Your Web server encountered an unexpected condition that prevented it from fulfilling the request by the client (e.g. your Web browser or our CheckUpDown robot) for access to the requested URL.This is a 'catch-all' error generated by your Web server. Basically something has gone wrong, but the server can not be more specific about the error condition in its response to the client. In addition to the 500 error notified back to the client, the Web server should generate some kind of internal error log which gives more details of what went wrong. It is up to the operators of your Web server site to locate and analyse these logs.
So i think you first initialize all variables
such as
private String emailAddress="";
private String password="";
etc..

HTTP Error 500.0 with CF 9 & IIS 7.5 32 bit enabled web app

Hello !
I have recently installed CF 9 64 bit on Windows Server 2008 Standard Edition R2 with IIS 7.5. I have just set the 'Enable 32 bit applications' option on the application pool settings to 'true' for one of the sites as I have some web pages that make use of a 32 bit COM DLL. I originally had this option set to 'false' and all of the web pages in my site were being served fine with the exception of the ones making use of the 32 bit COM DLL.
The details on the error message from IIS are as follows:
HTTP Error 500.0 - Internal Server Error
Detailed Error Information:
Module: IsapiModule
Notification: ExecuteRequestHandler
Handler: AboMapperCustom-75500
Error Code: 0x800700c1
Most Likely causes:
IIS received the request; however, an internal error occurred during the processing of the request. The root cause of this error depends on which module handles the request and what was happening in the worker process when this error occurred.
IIS was not able to access the web.config file for the Web site or application. This can occur if the NTFS permissions are set incorrectly.
IIS was not able to process configuration for the Web site or application.
The authenticated user does not have permission to use this DLL.
The request is mapped to a managed handler but the .NET Extensibility Feature is not installed.
Things you can try:
Ensure that the NTFS permissions for the web.config file are correct and allow access to the Web server's machine account.
Check the event logs to see if any additional information was logged.
Verify the permissions for the DLL.
Install the .NET Extensibility feature if the request is mapped to a managed handler.
Create a tracing rule to track failed requests for this HTTP status code. For more information about creating a tracing rule for failed requests, click here.
I am not sure if the error is permissions related or not.
1. How do I rectify this error and still keep the 'Enable 32 application' option turned on so I can call a 32 bit COM DLL ?
2. In general, can the 64 bit version of CF 9 even invoke 32 bit COM DLL's on IIS 7.5 or should this only be done with the 32 bit version of CF 9 ?
I would appreciate any help.
Thank you.

Here is the info:
http://helpx.adobe.com/coldfusion/kb/coldfusion-security-hotfix-apsb12-15.html
See notes section 5
CF9.0.2 came out with apsb12-15 applied.
Difference with CF10 is you can use CFadmin to change postparamlimit setting.
Cheers, Carl.

HTTP error: 500 (Internal Server Error) while creating content server repst

Hi All,
I am getting the HTTP error as mentioned below,
HTTP error: 500 (Internal Server Error)"CreateTab ContentStorage, connect error SQLConnect failed, [Microsoft][ODBC Driver
Manager] Data s
My content server is running on a Microsoft Cluster Environment.
I tried to follow the steps in the SAP note 301352.
Please help me in registering the LiveCache ODBC driver.
When i excute the the odbcreg.exe file i get the foll,
E:\sapdb\programs\pgm>odbcreg.exe
DriverName=MaxDB
Driver=e:\sapdb\programs\pgm\sqlod32.dll
Setup=e:\sapdb\programs\pgm\sqlsp32.dll
Version=7.6.0.0
Please help me in registering the Livecache ODBC driver.
Expecting your kind reply.
Vineeth

hi Vineeth Damodar
do it in command prompt.
change the drive letter ...where u install the sapdb.
D:\odbcreg LiveCache -i -p d:\sapdb\programs\pgm
it will prompt that LIvecache is registred. Restart the server.
then check in control panel...
The LiveCache ODBC driver should then be registered in the Control Panel -> ODBC Drivers -> Driver tab
-- Lee
rewared points .. if it helpful for u....

HTTP error: 500 Internal Server Error 0

Hi,
I've upgraded a third party server.
Everything was working fine before the upgrade.
But now when I go to OAC0,
if I do "test Connection" it is sucessful
but when I send a certificate it says
"HTTP error: 500 Internal Server Error 0"
I've tried
1. adding the server name in host file.
2. tried configuring the R/3 systems
3. configuring the R/3 gatways
4. testing the connection from the archive server.
everything is working fine.
But still i get the error
Pleae advice
Edited by: Gautam Samant on Sep 18, 2008 12:29 PM

Hi anirudh
The details are :
I'm trying to connec SAP R/3 to IXOS 9.6.1.
The database used is MS SQL 2000 SP4.
I've sucessfully configured the archive databse, archive server, everything.
I've even updated the database to match with IXOS.
The connection testing from both ends are working fine.
But when i try to send a certificate from SAP to IXOS,
its showing 500: internal server error.
What might be the reason?
Regards,
Gautam
Edited by: Gautam Samant on Sep 25, 2008 2:33 PM

Adobe Document Services - http Response 500 - How to configure the logging?

We are building an application in Web Dynpro Java that fetches data from an R/3 system via an RFC connection and is then supposed to show said data in a pdf within an iview. For that task we want to use the InteractiveForm UIElement. We bind the data to its pdfSource in the iViewu2019s context. Currently the form only consists of a text field bound to one attribute element of the pdfSource context node.
The ADS webservice is configured according to the manuals found here:
http://help.sap.com/saphelp_nw70/helpdata/en/fa/0b700d6cfd4e03a8ec2186ba6ff4af/frameset.htm
and tested successfully under the following link
http://<portal_host>:<port>/AdobeDocumentServices/Config?style=document
However, when we execute the application, an error occurs in the webservice generating the pdf, namely Invalid Content-Type:text/html. The error occurs when the iView containing the form is shown for the first time, even before the attributes of the pdfSource context are filled with data (we expect to see an empty form).
As it seems the webservice is expected to return a MIME type of either application/pdf or text/xml (we donu2019t know for sure since the SAP manuals and forums are inconclusive here), but instead we get text/html. This seems to be due to the fact that the webservice exits with an http response 500 Internal Server Error (we used several network monitoring tools to confirm that such a response is sent). Since such http responses are but html files with an empty body, yet not xml or pdf, the aforementioned error does make sense to us, but we do not know what Internal Error has caused it.
The only help that SAP seems to provide for an error u201CInvalid Content-Type:text/htmlu201D in context with ADS points to an expiring password or otherwise poor configuration of the ADSUser, which (most certainly) is not our case here since, and as said above, the configuration was and can be tested successfully.
We then tried to view the logs for this error on the machine where the J2EE engine is running with ADS installed according to this (not very comprehensible) guide:
http://help.sap.com/saphelp_nw70/helpdata/de/97/ccfc3f0ac2c642e10000000a1550b0/frameset.htm
We cannot find anything relevant in the server.log of the Visual Administrator except this message (it is generated exactly when our error occurs u2013 the trace severity is set to ALL for all Adobe application elements according to manual):
Date , Time , Message , Severity , Category , Location , Application , User
12/08/2010 , 13:50:46:511 , application [webdynpro/dispatcher] Processing HTTP request to servlet [dispatcher] finished with error.
The error is: com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentRuntimeException: Failed to GENERATEPDF
Exception id: [0800274DA7ED00850000005B00000900000496E5919E28BA] , Error , /System/Server/WebRequests , com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl , sap.com/tcwddispwda , Guest
There is no error.pdf to be found on the file system and since neither have we known nor are we told by the error message, whether the underlying cause is is a render error or connection error or configuration error or what not, we donu2019t know whether the error.pdf is supposed to be generated at all.
Or could there be any other reason why generation didnu2019t take place?
Furthermore we canu2019t seem to be able to find any logs more verbose or detailed about this issue - at least not within the Visual Administrator or the portalu2019s nwa.
How is it possible to properly debug the webservice for pdf-generation or at least to retrieve a fully detailed log containing all notifications and exception stack traces etc.?
I am assuming that we are making some basic mistakes regarding the logging configuration - but what?
Our goal is to know what causes the 500 Internal Server Error response that causes the Incorrect Content-Type exception.
We are using a NetWeaver 7.01 portal installation with Adobe Document Services 7.01 installed on a Windows Server 2003 platform.
Any help is highly appreciated!
Serg

Have you tried restarting the Java PDF object in Visual Administrator? Once you do all of your config, you have to restart the PDF object (sao.com/tcwdpdfobject) for the changes to take place. I am assuming you've run all of the test programs in SAP (FP_TEST_00, FP_TEST_03, etc.). Is there any chance that the ADSUSER is locked somehow?

Tomcat - HTTP Status 500 - System Unavailable. Please try again later.

HI,
I installed ORACLE XE + TOMCAT 7 + ORACLE XE on windows XP.
All seems to work under debug session but on normal session I found the following message only when I put a specific parameter on my query.
The same query with the same parameter runs in the sqldev client whitout errors
Here below the massages:
HTTP Status 500 - System Unavailable. Please try again later.
type Status report
message System Unavailable. Please try again later.
description The server encountered an internal error (System Unavailable. Please try again later.) that prevented it from fulfilling this request.
Apache Tomcat/7.0.2
and in the log file:
2011-02-23 18:04:19 Commons Daemon procrun stdout initialized
APEX Listener version : 1.0.2.238.15.24
APEX Listener server info: Apache Tomcat/7.0.2
Using Config file:C:\Programmi\Apache Software Foundation\Tomcat 7.0\temp\apex\apex-config.xml
-- listing properties --
PropertyCheckInterval=60
ValidateConnection=true
MinLimit=1
MaxLimit=10
InitialLimit=3
AbandonedConnectionTimeout=900
MaxStatementsLimit=10
InactivityTimeout=1800
MaxConnectionReuseCount=50000
***********ERROR***********
init: # headers=46
declare nm owa.vc_arr := ?;
     vl owa.vc_arr := ?;
begin
owa.init_cgi_env( ?, nm, vl );
htp.init; htp.HTBUF_LEN := 63;
? := sys_context('USERENV','SID');
end;
SID:18
CALL:
begin
f(p=>?);
commit;
end;
BINDS
p:106:3:4503262208013405:::::PAGE CALL:
declare
nlns number := 999999;
l_clob CLOB;
lines htp.htbuf_arr;
l_buff varchar2(32767);
l_clob_init boolean:= false;
l_file varchar2(5);
begin
OWA.GET_PAGE(lines, nlns);
if (nlns > 1) then
for i in 1..nlns loop
if ( length(lines(i)) > 0 ) then
if ( ( lengthb(l_buff) + lengthb(lines(i))) > 32767) then
               if (NOT l_clob_init) then
                    dbms_lob.createtemporary(l_clob, TRUE);
                    dbms_lob.open(l_clob, dbms_lob.lob_readwrite);
                    l_clob_init:=true;
               end if;
dbms_lob.writeappend(l_clob,length(l_buff),l_buff);
l_buff := lines(i);
else
l_buff := l_buff || lines(i);
end if;
end if;
end loop;
end if;
if (l_clob_init) then
dbms_lob.writeappend(l_clob,length(l_buff),l_buff);
l_buff := '';
end if;
? := l_clob;
? := l_buff;
if (wpg_docload.is_file_download) then l_file:='TRUE'; else l_file := 'FALSE'; end if; ? := l_file;
end;
get_page FAILED:ORA-06502: PL/SQL: errore : buffer della stringa di caratteri troppo piccolo di numero o valore
ORA-06512: a line 32
^^^^^^^^^^^^ERROR^^^^^^^^
ORA-06502: PL/SQL: errore : buffer della stringa di caratteri troppo piccolo di numero o valore
ORA-06512: a line 32
***********ERROR***********
init: # headers=46
declare nm owa.vc_arr := ?;
     vl owa.vc_arr := ?;
begin
owa.init_cgi_env( ?, nm, vl );
htp.init; htp.HTBUF_LEN := 63;
? := sys_context('USERENV','SID');
end;
SID:18
CALL:
begin
f(p=>?);
commit;
end;
BINDS
p:106:3:3777982020408238:::::PAGE CALL:
declare
nlns number := 999999;
l_clob CLOB;
lines htp.htbuf_arr;
l_buff varchar2(32767);
l_clob_init boolean:= false;
l_file varchar2(5);
begin
OWA.GET_PAGE(lines, nlns);
if (nlns > 1) then
for i in 1..nlns loop
if ( length(lines(i)) > 0 ) then
if ( ( lengthb(l_buff) + lengthb(lines(i))) > 32767) then
               if (NOT l_clob_init) then
                    dbms_lob.createtemporary(l_clob, TRUE);
                    dbms_lob.open(l_clob, dbms_lob.lob_readwrite);
                    l_clob_init:=true;
               end if;
dbms_lob.writeappend(l_clob,length(l_buff),l_buff);
l_buff := lines(i);
else
l_buff := l_buff || lines(i);
end if;
end if;
end loop;
end if;
if (l_clob_init) then
dbms_lob.writeappend(l_clob,length(l_buff),l_buff);
l_buff := '';
end if;
? := l_clob;
? := l_buff;
if (wpg_docload.is_file_download) then l_file:='TRUE'; else l_file := 'FALSE'; end if; ? := l_file;
end;
get_page FAILED:ORA-06502: PL/SQL: errore : buffer della stringa di caratteri troppo piccolo di numero o valore
ORA-06512: a line 32
^^^^^^^^^^^^ERROR^^^^^^^^
ORA-06502: PL/SQL: errore : buffer della stringa di caratteri troppo piccolo di numero o valore
ORA-06512: a line 32
Could you kindly help me.
Thanks in advance for your help
Best Regards

Hi Paolo,
which APEX version do you use?
There are only a few reasons that might lead to the behaviour you describe. These are
- configured header size for Tomcat Connector is too small
- configured character encoding for Tomcat Connector doesn't fit for APEX (you need UTF-8)
- you don't have the required version of OWA_UTIL in your XE if you upgraded to a more recent APEX release (e.g. APEX 4.0)
Have you configured the Tomcat's HTTP Connector to use the appropriate header size and character encoding?
(see {thread:id=2174509})
If you've upgraded your XEs APEX, e.g. to 4.0, you also have to update the OWA_UTIL in your XE. APEX versions from 3.0 onwards require at least 10.1.2.0.6, which is the version provided in the installation package. You may just update to that version by changing to the subdirectory owa of your APEX installation package and running
@owainst.sqlas sys (just like in the steps before).
You can check if you have the appropriate version of OWA_UTIL installed by running
select owa_util.get_version from dual;In addition you may also want to check if you performed all steps of this small [url http://www.oracle.com/technetwork/developer-tools/apex/upgrade-apex-for-xe-154969.html]HowTo for the upgrade of APEX in XE databases.
-Udo

2 users can't login - HTTP Status 500 - on Teaming 2.0

I have 2 user that can't login to Teaming 2.0. They get this error: "HTTP Status 500". Even if I enter a bogus password for them the "HTTP Status 500" error occurs. I use LDAP authentication to eDirectory. These users DON'T have duplicate objects in my tree. In eDirectory they have first name, last name, full name, phone number and email address entries. All other users can login. Where are the Apache Tomcat/6.0.18 logs on a SLES 10 install of Teaming 2.0? There are log files in /opt/novell/teaming/
Browser screen content:
HTTP Status 500 -
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
org.springframework.dao.IncorrectResultSizeDataAcc essException: Incorrect result size: expected 1, actual 2
org.springframework.security.ldap.SpringSecurityLd apTemplate$3.executeWithContext(SpringSecurityLdap Template.java:204)
org.springframework.ldap.core.LdapTemplate.execute WithContext(LdapTemplate.java:807)
org.springframework.ldap.core.LdapTemplate.execute ReadOnly(LdapTemplate.java:793)
org.springframework.security.ldap.SpringSecurityLd apTemplate.searchForSingleEntry(SpringSecurityLdap Template.java:190)
org.springframework.security.ldap.search.FilterBas edLdapUserSearch.searchForUser(FilterBasedLdapUser Search.java:118)
org.springframework.security.providers.ldap.authen ticator.BindAuthenticator.authenticate(BindAuthent icator.java:82)
org.springframework.security.providers.ldap.LdapAu thenticationProvider.authenticate(LdapAuthenticati onProvider.java:229)
org.springframework.security.providers.ProviderMan ager.doAuthentication(ProviderManager.java:195)
org.springframework.security.AbstractAuthenticatio nManager.authenticate(AbstractAuthenticationManage r.java:46)
org.kablink.teaming.module.authentication.impl.Aut henticationModuleImpl.doAuthenticate(Authenticatio nModuleImpl.java:280)
org.kablink.teaming.module.authentication.impl.Aut henticationModuleImpl.authenticate(AuthenticationM oduleImpl.java:245)
sun.reflect.GeneratedMethodAccessor660.invoke(Unkn own Source)
sun.reflect.DelegatingMethodAccessorImpl.invoke(De legatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:585)
org.springframework.aop.support.AopUtils.invokeJoi npointUsingReflection(AopUtils.java:307)
org.springframework.aop.framework.ReflectiveMethod Invocation.invokeJoinpoint(ReflectiveMethodInvocat ion.java:182)
org.springframework.aop.framework.ReflectiveMethod Invocation.proceed(ReflectiveMethodInvocation.java :149)
org.kablink.teaming.search.interceptor.IndexSynchr onizationManagerInterceptor.invoke(IndexSynchroniz ationManagerInterceptor.java:67)
org.springframework.aop.framework.ReflectiveMethod Invocation.proceed(ReflectiveMethodInvocation.java :171)
org.springframework.aop.interceptor.AbstractTraceI nterceptor.invoke(AbstractTraceInterceptor.java:11 3)
org.springframework.aop.framework.ReflectiveMethod Invocation.proceed(ReflectiveMethodInvocation.java :171)
org.springframework.aop.framework.JdkDynamicAopPro xy.invoke(JdkDynamicAopProxy.java:204)
$Proxy21.authenticate(Unknown Source)
org.springframework.security.providers.ProviderMan ager.doAuthentication(ProviderManager.java:195)
org.springframework.security.AbstractAuthenticatio nManager.authenticate(AbstractAuthenticationManage r.java:46)
org.springframework.security.ui.webapp.Authenticat ionProcessingFilter.attemptAuthentication(Authenti cationProcessingFilter.java:82)
org.springframework.security.ui.AbstractProcessing Filter.doFilterHttp(AbstractProcessingFilter.java: 252)
org.springframework.security.ui.SpringSecurityFilt er.doFilter(SpringSecurityFilter.java:53)
org.springframework.security.util.FilterChainProxy $VirtualFilterChain.doFilter(FilterChainProxy.java :371)
org.springframework.security.ui.logout.LogoutFilte r.doFilterHttp(LogoutFilter.java:89)
org.springframework.security.ui.SpringSecurityFilt er.doFilter(SpringSecurityFilter.java:53)
org.springframework.security.util.FilterChainProxy $VirtualFilterChain.doFilter(FilterChainProxy.java :371)
org.springframework.security.context.HttpSessionCo ntextIntegrationFilter.doFilterHttp(HttpSessionCon textIntegrationFilter.java:235)
org.springframework.security.ui.SpringSecurityFilt er.doFilter(SpringSecurityFilter.java:53)
org.springframework.security.util.FilterChainProxy $VirtualFilterChain.doFilter(FilterChainProxy.java :371)
org.kablink.teaming.spring.security.ZoneGrabbingFi lter.doFilterHttp(ZoneGrabbingFilter.java:58)
org.springframework.security.ui.SpringSecurityFilt er.doFilter(SpringSecurityFilter.java:53)
org.springframework.security.util.FilterChainProxy $VirtualFilterChain.doFilter(FilterChainProxy.java :371)
org.springframework.security.util.FilterChainProxy .doFilter(FilterChainProxy.java:174)
org.springframework.web.filter.DelegatingFilterPro xy.invokeDelegate(DelegatingFilterProxy.java:236)
org.springframework.web.filter.DelegatingFilterPro xy.doFilter(DelegatingFilterProxy.java:167)
note The full stack trace of the root cause is available in the Apache Tomcat/6.0.18 logs.

You need to be sure that it is not an LDAP problem... the best way is to start from LDAP to investigate. Enable the LDAP trace on eDir with imonitor, during the teaming login. Also you can use ldapsearch to have full details on the accounts in order to compare them with a working user (a space somewhere, an additional attribute, etc...).

HTTP Status 500 Error java.lang.NullPointerException on BO 4.0 SP2

Hello,
we installed BO 4.0 SP2 with Tomcat 6 on Windows Server 2008 R2 64 Bit.
After installation it is not possible to open the CMC, BI-Launchpad or LCM in a browser. It presents the following error page:
HTTP Status 500 -
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
java.lang.NullPointerException
     com.businessobjects.servletbridge.customconfig.Config.<init>(Config.java:37)
     com.businessobjects.servletbridge.customconfig.ConfigReader.getConfig(ConfigReader.java:274)
     com.businessobjects.pinger.TimeoutManagerFilter.getSessionState(TimeoutManagerFilter.java:192)
     com.businessobjects.pinger.TimeoutManagerFilter.doFilter(TimeoutManagerFilter.java:75)
note The full stack trace of the root cause is available in the Apache Tomcat/6.0.24 logs.
Apache Tomcat/6.0.24
This is the error message from Tomcat log:
28.09.2011 08:56:46 org.apache.catalina.core.StandardWrapperValve invoke
SCHWERWIEGEND: Servlet.service() for servlet equinoxbridgeservlet threw exception
java.lang.NullPointerException
     at com.businessobjects.servletbridge.customconfig.Config.<init>(Config.java:37)
     at com.businessobjects.servletbridge.customconfig.ConfigReader.getConfig(ConfigReader.java:274)
     at com.businessobjects.pinger.TimeoutManagerFilter.getSessionState(TimeoutManagerFilter.java:192)
     at com.businessobjects.pinger.TimeoutManagerFilter.doFilter(TimeoutManagerFilter.java:75)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
     at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:298)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:852)
     at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:588)
     at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:489)
     at java.lang.Thread.run(Thread.java:619)
The installation of 'SBOP BI Platform Servers 4.0 SP02 Patch 5' didn't affect this problem, it still has the same error.
BusinessObjects XI 3.1 is running without problems on that server.
Any help would be very appreciated!
Thanks in advance.

Hello together,
I could fix this issue without any reinstalling of tomcat. I had the same problem after installtion of Patch 9 of SP2 for BOE 4.0.
Directly after the installation I changed the session-timeout parameter in some web.xml's because it was requested by our customer. Because I wanted to have a good documentation of those changes in the web.xml's I created a bigger comment in these files.
First I got 404 errors after that - to solve this I followed Knowledgebase article [1639813|https://websmp230.sap-ag.de/sap/support/notes/1639813] but first it didn't help.
So the before mentioned bigger comments seemed to be a problem (or maybe the special characters in there) because after shortening these comments and restarting SIA and Tomcat the 404 error disappeared and suddenly the above described 500 error occured.
After that I changed the Tomcat's localhost directory to localhost.old during downtime of Tomcat (as recommended by Lukas Kostrab). localhost was newly created but it didn't help either.
So last but not least I redeployed tomcat following article [1639813|https://websmp230.sap-ag.de/sap/support/notes/1639813] (wdeploy.bat tomcat6 u2013DAPP=BOE deploy) and started Tomcat and SIA again. I decided to wait a little bit longer with trying to start CMC - maybe 15min - and suddenly it worked.
So in conclusion I would say:
- check any changes you made in any config-files (like e.g. web.xml) and shorten them or remove special characters
- stop SIA and Tomcat
- rename localhost directory (or copy and remove) so it will be recreated at startup of Tomcat
- if that doesn't help check tomcat config according to article [1639813|https://websmp230.sap-ag.de/sap/support/notes/1639813] and redeploy tomcat as mentioned in that arcitle and be a little bit patient
Hope this might help some of you.
Best wishes
Marie

HTTP Status 500 -

Add_Product.java
import java.io.*;
import java.net.*;
import java.sql.*;
import javax.servlet.*;
import javax.servlet.http.*;
import mysql.daofactory.DaoFactory;
import mysql.daoqueryclass.DaoQueryClass;
import mysql.daoqueryinterface.DaoQueryInterface;
public class Add_Product extends HttpServlet
public void doGet(HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException {
response.setContentType("text/html;charset=UTF-8");
PrintWriter out = response.getWriter();
try {
String product_code=request.getParameter("product_code");
String product_name=request.getParameter("product_name");
String quantity=request.getParameter("quantity");
String dom=request.getParameter("dom");
String uom=request.getParameter("uom");
String packag=request.getParameter("packag");
DaoFactory dao=new DaoFactory();
Connection con1=dao.getConnection();
DaoQueryInterface daoi=(DaoQueryInterface) new DaoQueryClass();
Connection con2=dao.getConnection();
// int rs=daoi.addproduct(con2, product_code, product_name, quantity, dom, uom, packag);
int add=daoi.addproduct(con2, product_code, product_name, quantity, dom, uom, packag);
// if(rs.next())
if(add!=0)
request.setAttribute("SUCCESS", "new product addess");
RequestDispatcher rd=getServletContext().getRequestDispatcher("/Product_details.jsp");
rd.forward(request, response);
else
catch (Exception ex) {
request.setAttribute("ERROR","Error While Loading the Form..Now Go ahead...");
RequestDispatcher rd = getServletContext ( ) .getRequestDispatcher ( "/Product_details.jsp" ) ;
rd.forward ( request, response ) ;
ex.printStackTrace();
out.close();
Product_details.jsp
<%@page contentType="text/html"%>
<%@page pageEncoding="UTF-8"%>
<%@page import="mysql.daofactory.DaoFactory,mysql.daoqueryclass.DaoQueryClass,mysql.daoqueryinterface.DaoQueryInterface"%>
<%@page import="java.sql.*"%>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
<script language="javascript" src="JSCRIPTcalendar\calenda.js" type="text/javascript"></script>
<link href="JSCRIPTcalendar\calendar.css" rel="stylesheet" type="text/css"></link>
<SCRIPT src="JSCRIPTcalendar\check.js"></SCRIPT>
<title>JSP Page</title>
</head>
<body>
<form method=post action= "/src/java/Add_Product">
<p> </p>
<center>
<table border="0" cellpadding="0" cellspacing="0" style="border-collapse: collapse" bordercolor="#111111" width="77%" id="AutoNumber1">
<tr>
<td width="50%">Product Code</td>
<td width="50%"><input type="text" name="product_code" size="20"></td>
</tr>
<tr>
<td width="50%">Product Name</td>
<td width="50%"><input type="text" name="product_name" size="20"></td>
</tr>
<tr>
<td width="50%">Quantity</td>
<td width="50%"><input type="text" name="quantity" size="20"></td>
</tr>
<tr>
<td width="50%">Date of Manufacture</td>
<td width="50%"><input type="text" name="dom" size="20"></td>
</tr>
<tr>
<td width="50%">Unit of Manufacture</td>
<td width="50%"><input type="text" name="uom" size="20"></td>
</tr>
<tr>
<td width="50%">Package Type</td>
<td width="50%"><input type="text" name="package" size="20"></td>
</tr>
</table></center>
<p> </p>
<p align="center"><input type="submit" value="Submit" name="B1" onclick="javascript:return check();" style="color: #FFFFFF; font-weight: bold; border: 1px solid #FFFFFF; background-color: #003366; width:100; height:30; font-family:Arialsans-serif; font-size:12pt"> <input type="reset" value="Reset" name="B2"></p>
<p align="center"> </p>
</form>
<% if(request.getAttribute("SUCCESS")!=null){%>
<%= request.getAttribute("SUCCESS")%>
</body>
</html>
<script language ="javascript" type="text/javascript">
function check()
if(
isBlank('AddingProject','product_code') && isNumber('AddingProject','product_name') && isNumber('AddingProject','quantity') && isNumber('AddingProject','dom') && isNumber('AddingProject','uom') && isBlank('AddingProject','package')
{ return true; }
else { return false; }
</script>
I have the following error
HTTP Status 500 -
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException: Unable to compile class for JSP
An error occurred at line: -1 in the jsp file: null
Generated servlet error:
[javac] Compiling 1 source file
C:\Program Files\Apache Software Foundation\Tomcat 5.0\work\Catalina\localhost\Logistics\org\apache\jsp\Product_005fdetails_jsp.java:123: 'catch' without 'try'
} catch (Throwable t) {
^
C:\Program Files\Apache Software Foundation\Tomcat 5.0\work\Catalina\localhost\Logistics\org\apache\jsp\Product_005fdetails_jsp.java:34: 'try' without 'catch' or 'finally'
try {
^
C:\Program Files\Apache Software Foundation\Tomcat 5.0\work\Catalina\localhost\Logistics\org\apache\jsp\Product_005fdetails_jsp.java:135: '}' expected
^
3 errors
     org.apache.jasper.compiler.DefaultErrorHandler.javacError(DefaultErrorHandler.java:127)
     org.apache.jasper.compiler.ErrorDispatcher.javacError(ErrorDispatcher.java:351)
     org.apache.jasper.compiler.Compiler.generateClass(Compiler.java:415)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:458)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:439)
     org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:553)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:291)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:301)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:248)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     Add_Product.doGet(Add_Product.java:53)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
note The full stack trace of the root cause is available in the Tomcat logs.
Apache Tomcat/5.0.19
please help me.....
Edited by: GeethaKaliyamoorthy on Aug 9, 2008 2:49 AM
Edited by: GeethaKaliyamoorthy on Aug 9, 2008 2:50 AM

hi Mam,
A simple mistake done in your code i.e in jsp code(product_details.jsp)
you open the bracket for jsp code but not closed thats why error coming
just close the bracket after the condition error will be solved

SOAP:1.026 SRT: HTTP-Code 500: ("Internal Server Error")    Exception of class CX_AI_SYSTEM_FAULT

Hi All,
        while Running Client Proxies from se80 im getting Following error. i already checked all the Services All are active only. can any one suggest me:
SOAP:1.026 SRT: HTTP-Code 500: ("Internal Server Error")
Exception of class CX_AI_SYSTEM_FAULT
RFC Trace:
**** Trace file opened at 20140630 124650 IST, by disp+work
    **** Versions SAP-REL 721,0,201 RFC-VER U 3 1460390 MT-SL
    XRFC> Begin of user trace
    XRFC>
    XRFC>
<
    XRFC> TRACE SOAP RUNTIME - header
<
    XRFC>
<
    XRFC>
    XRFC> SESSION_ID : 0002425553A5ECFC63B114C4E1000000C0A80141
    XRFC> TS_CALL
: 20140630071647.5930180
<
    XRFC> SY_UNAME   : SAPADMIN
<
    XRFC> HOSTNAME   : SOLAR-DEV
<
    XRFC> SY_SID
: DEV
<
    XRFC> SY_MANDT   : 001
<
    XRFC> SYS_NR
: 01
<
    XRFC> APPLSERVER : SOLAR-DEV_DEV_01
<
    XRFC> ISPRESCHED : X
<
    XRFC> PARENT_ID : ROOT_CALL_ID
<
    XRFC> REQ_SIZE   : 1821
<
    XRFC> RESP_SIZE : 75
<
    XRFC> DURATION   : 2246
<
    XRFC> NETHDRTIME : 2246
<
XRFC> CALL_STATE : 2
<
XRFC> ERRORTYPE : SYSFAIL
<
XRFC> ERRORAREA : COREMSG
<
XRFC> CTXDP_TYPE : SOAP_RUNTIME
<
XRFC> SYNC_ASYNC : S
<
XRFC> LOCATION   : C
<
XRFC> DIRECTION : O
<
XRFC> REQ_ID
: 52EDA553B163C414E1000000C0A80141
<
XRFC> RESP_ID
: 00000000000000000000000000000000
<
XRFC> MSG_STATE : 114
<
XRFC> IF_NAME_I : YSCO_SAPORDERS_SOAP
<
XRFC> IF_NS_E
<
XRFC> IF_NAME_E :
<
XRFC> ISSHORTCUT :
<
XRFC> TRC_PATT   : WSTEST
<
XRFC> TRC_KEY
: 50EDA553B163C414E1000000C0A80141
<
XRFC> TRC_SSID   : DEV_01
<
XRFC> TRC_USER   : SAPADMIN
<
XRFC> TRC_TS
: 20140630071647
<
XRFC> TRC_COUNT : 98
<
XRFC> TRC_EXT
<
XRFC> COMPLETE   : OK
<
XRFC> CALLEDPROG : YSCO_SAPORDERS_SOAP
<
XRFC> SOAP_APPLI : urn:sap-com:soap:runtime:application:client
<
XRFC> CONF_ID
<
XRFC> BIND_ID
<
XRFC> OP_NAME
: InsertPPOrders_Development
<
XRFC> COMM_PATRN : Method:InsertPPOrders_Development
<
XRFC> OP_NS
: http://microsoft.com/webservices/
<
XRFC> REMADDRESS :
<
XRFC> LP_NAME
: YSLP1
<
XRFC> DT_OBJ
: YSCO_SAPORDERS_SOAP
<
XRFC> MEMCONSUMP : 198
<
XRFC> BONAME
<
XRFC> PROCCOMP   :
<
XRFC> DEPLOYUNIT :
<
XRFC>       <
XRFC>
<
XRFC> TRACE SOAP RUNTIME - trace records
<
XRFC>
<
XRFC>       <
XRFC> E SOAP_RUNTIME 20140630071649.8380110 : CL_SOAP_RUNTIME_CLIENT
<
XRFC> ->EXECUTE_PROCESSING Exception handling in SOAP runtime
<
XRFC>
<
XRFC>
<
XRFC> E SOAP_APPLICATION 20140630071649.8382410 : CL_SOAP_APPLICATION
<
    XRFC> _CLIENT ->IF_SOAP_APPLICATION_CS~EXECUTE_PROCESSING Exception
<
    XRFC> handling in SOAP runtime
<
    XRFC>
<
    XRFC>
<
    XRFC> E HTTP_TRANSPORT_BINDING 20140630071649.8368980 : CL_SOAP_HTTP
<
    XRFC> _TPBND_ROOT ->HANDLE_STATUS_CODE Received return code 500 (
<
    XRFC> Internal Server Error )
<
    XRFC>
<
    XRFC>
<
    XRFC> E SOAP_RUNTIME 20140630071649.8379970 : CL_SOAP_RUNTIME_CLIENT
<
    XRFC> ->EXECUTE_PROCESSING A SOAP Runtime Core Exception occurred in
<
    XRFC> method get_http_headers of class CL_SOAP_HTTP_TPBND_ROOT at
<
    XRFC> position id 3 with internal error id 1026 and error text SRT:
<
    XRFC> HTTP-Code 500: ("Internal Server Error") (fault location is 1 ).
<
    XRFC>
<
    XRFC>
<
    XRFC> E SOAP_APPLICATION 20140630071649.8382290 : CL_SOAP_APPLICATION
<
    XRFC> _CLIENT ->IF_SOAP_APPLICATION_CS~EXECUTE_PROCESSING A SOAP Runtime <
    XRFC> Core Exception occurred in method get_http_headers of class
<
    XRFC> CL_SOAP_HTTP_TPBND_ROOT at position id 3 with internal error id
<
    XRFC> 1026 and error text SRT: HTTP-Code 500: ("Internal Server Error")   <
    XRFC> (fault location is 1 ).
<
    XRFC>
<
Find The Attachment for error:

Hi Brahmaji,
i also faced with the above problem, activete the srt services in SICF Transaction.
Regards,
Kumar.
Edited by: kmikkili on Nov 18, 2009 11:39 PM

Apache Tomcat/4.0.4 - HTTP Status 500 - Internal Server Error

Can someone give my a hand with this problem because the unix administrator of my website don't know how to fixes.
When I try to run a servlet name SimpleServer or other servlet from my website I received the following error:
Apache Tomcat/4.0.4 - HTTP Status 500 - Internal Server Error
type Exception report
message Internal Server Error
description The server encountered an internal error (Internal Server Error) that prevented it from fulfilling this request.
exception
javax.servlet.ServletException: Cannot allocate servlet instance for path /servlet/SimpleServlet
     at org.apache.catalina.servlets.InvokerServlet.serveRequest(InvokerServlet.java:419)
     at org.apache.catalina.servlets.InvokerServlet.doGet(InvokerServlet.java:180)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:247)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:193)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:243)
     at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:190)
     at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
     at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2347)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:180)
     at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
     at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:170)
     at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:170)
     at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:174)
     at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
     at org.apache.ajp.tomcat4.Ajp13Processor.process(Ajp13Processor.java:458)
     at org.apache.ajp.tomcat4.Ajp13Processor.run(Ajp13Processor.java:551)
     at java.lang.Thread.run(Thread.java:484)
root cause
java.lang.ClassFormatError: SimpleServlet (Illegal constant pool type)
     at java.lang.ClassLoader.defineClass0(Native Method)
     at java.lang.ClassLoader.defineClass(ClassLoader.java:486)
     at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:111)
     at org.apache.catalina.loader.WebappClassLoader.findClassInternal(WebappClassLoader.java:1643)
     at org.apache.catalina.loader.WebappClassLoader.findClass(WebappClassLoader.java:937)
     at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1372)
     at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1254)
     at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:867)
     at org.apache.catalina.core.StandardWrapper.allocate(StandardWrapper.java:655)
     at org.apache.catalina.servlets.InvokerServlet.serveRequest(InvokerServlet.java:400)
     at org.apache.catalina.servlets.InvokerServlet.doGet(InvokerServlet.java:180)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:247)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:193)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:243)
     at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:190)
     at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
     at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2347)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:180)
     at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
     at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:170)
     at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:170)
     at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:174)
     at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
     at org.apache.ajp.tomcat4.Ajp13Processor.process(Ajp13Processor.java:458)
     at org.apache.ajp.tomcat4.Ajp13Processor.run(Ajp13Processor.java:551)
     at java.lang.Thread.run(Thread.java:484)
Thanks in advance,
Jose

Hi,
ClassFormatError is Thrown when the Java Virtual Machine attempts to read a class file and determines that the file is malformed or otherwise cannot be interpreted as a class file.
So check whether you have properly configured servlet and whether class file is VALID and is in right place or not.
Sandesh

Help HTTP status 500 error using tomcat 5.0.16

Hi,
I am getting the below mentioned erors using Tomcat 5.0.16 in a directory structure like this
E:\sampleapp\WEB-INF
\WEB-INF\classes
\WEB-INF\lib
\WEB-INF\sourcefile
\WEB-INF\web.xml
HTTP Status 500 -
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
javax.servlet.ServletException: Wrapper cannot find servlet class package1.structure.HelloServlet or a class it depends on
     org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:164)
     org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:211)
     org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:805)
     org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:696)
     org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:605)
     org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:677)
     java.lang.Thread.run(Thread.java:534)
root cause
java.lang.ClassNotFoundException: package1.structure.HelloServlet
     org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1366)
     org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1213)
     org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:164)
     org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:211)
     org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:805)
     org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:696)
     org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:605)
     org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:677)
     java.lang.Thread.run(Thread.java:534)
Kindly let me know how to come around it.
Any help would be appreciated.
Thanks
AS

Hi ,
I got struct here, can any body help me out.
I am unable to tress it our, where was the error
Any help will be appreciated.
Sanju
HTTP Status 500 -
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException: File "/WEB-INF/struts-tml.tld" not found
     org.apache.jasper.compiler.DefaultErrorHandler.jspError(DefaultErrorHandler.java:50)
     org.apache.jasper.compiler.ErrorDispatcher.dispatch(ErrorDispatcher.java:407)
     org.apache.jasper.compiler.ErrorDispatcher.jspError(ErrorDispatcher.java:114)
     org.apache.jasper.compiler.TagLibraryInfoImpl.<init>(TagLibraryInfoImpl.java:159)
     org.apache.jasper.compiler.Parser.parseTaglibDirective(Parser.java:418)
     org.apache.jasper.compiler.Parser.parseDirective(Parser.java:483)
     org.apache.jasper.compiler.Parser.parseElements(Parser.java:1543)
     org.apache.jasper.compiler.Parser.parse(Parser.java:126)
     org.apache.jasper.compiler.ParserController.doParse(ParserController.java:211)
     org.apache.jasper.compiler.ParserController.parse(ParserController.java:100)
     org.apache.jasper.compiler.Compiler.generateJava(Compiler.java:146)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:286)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:267)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:255)
     org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:556)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:293)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:291)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:241)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
note The full stack trace of the root cause is available in the Apache Tomcat/5.5.9 logs.
Apache Tomcat/5.5.9

File-File HTTP ResponseCode 500

Similar Messages

Maybe you are looking for