File name issues with Relocated Masters

I am relocating Master Images from my Managed Aperture Library on my internal disk to a Referenced Library on an external hard drive. Everything in my efforts has run smoothly, except the names of the files that are showing up in my referenced folders on the external drive.
I am setting a folder hierarchy, and this is working fine. For the file names, I am choosing the Version Name. This is where I am having a problem. Only some of the images are relocating with the Version Name. The others are relocating with the Master File Name instead.
Why won't my images transfer over with the names that I am instructing Aperture to transfer them as?

How are you connecting to the server? Using Windows file sharing with an "smb" connection? Or does the server have file services for Macintosh enabled so you're connecting with an "afp" address? Do you see these file names in the Finder? Or are you seeing it the open/save dialog boxes in your Adobe programs?
We have lots of Macs at the office (most have 10.4.x but we're moving to 10.5.x) and we share Adobe files from Windows 2003 servers without a problem seeing the correct file names. So, I don't think you should have a problem like that.
-Doug

Similar Messages

Help with add file name problem with Photoshop CS4

Frustrating problem: Help with add file name problem with Photoshop CS4. What happens is this. When I am in PS CS4 or CS3 and run the following script it runs fine. When I am in Bridge and go to tools/photoshop/batch and run the same script it runs until it wants interaction with preference.rulerunits. How do I get it to quit doing this so I can run in batch mode? Any help is appreciated. HLower
Script follows:
// this script is another variation of the script addTimeStamp.js that is installed with PS7
//Check if a document is open
if ( documents.length > 0 )
var originalRulerUnits = preferences.rulerUnits;
preferences.rulerUnits = Units.INCHES;
try
var docRef = activeDocument;
// Create a text layer at the front
var myLayerRef = docRef.artLayers.add();
myLayerRef.kind = LayerKind.TEXT;
myLayerRef.name = "Filename";
var myTextRef = myLayerRef.textItem;
//Set your parameters below this line
//If you wish to show the file extension, change the n to y in the line below, if not use n.
var ShowExtension = "n";
// Insert any text to appear before the filename, such as your name and copyright info between the quotes.
//If you do not want extra text, delete between the quotes (but leave the quotes in).
var TextBefore = "Lower© ";
// Insert any text to appear after the filename between the quotes.
//If you do not want extra text, delete between the quotes (but leave the quotes in).
var TextAfter = " ";
// Set font size in Points
myTextRef.size = 10;
//Set font - use GetFontName.jsx to get exact name
myTextRef.font = "Arial";
//Set text colour in RGB values
var newColor = new SolidColor();
newColor.rgb.red = 0;
newColor.rgb.green = 0;
newColor.rgb.blue = 0;
myTextRef.color = newColor;
// Set the position of the text - percentages from left first, then from top.
myTextRef.position = new Array( 10, 99);
// Set the Blend Mode of the Text Layer. The name must be in CAPITALS - ie change NORMAL to DIFFERENCE.
myLayerRef.blendMode = BlendMode.NORMAL;
// select opacity in percentage
myLayerRef.opacity = 100;
// The following code strips the extension and writes tha text layer. fname = file name only
di=(docRef.name).indexOf(".");
fname = (docRef.name).substr(0, di);
//use extension if set
if ( ShowExtension == "y" )
fname = docRef.name
myTextRef.contents = TextBefore + " " + fname + " " + TextAfter;
catch( e )
// An error occurred. Restore ruler units, then propagate the error back
// to the user
preferences.rulerUnits = originalRulerUnits;
throw e;
// Everything went Ok. Restore ruler units
preferences.rulerUnits = originalRulerUnits;
else
alert( "You must have a document open to add the filename!" );

you might want to try the scripting forum howard:
http://www.adobeforums.com/webx?13@@.ef7f2cb

All of a sudden File compatability issues with IPhoto & digital camera

Anyone have issues or solutions for solving file compatability issues with IPhoto & digital camera? Worked okay for years but all of a sudden giving me error messages about file format. My camera uses Jpeg.

There is an issue ongoing between 10.6 and Kodak cameras. Workround: use a USB Card Reader.
Regards
TD

I am having a file moving issue with Adobe Reader XI

I am having a file moving issue with Adobe Reader XI on a Windows 7 32bit system. When Adobe reader is set as the default program for PDF files moving files from one directory to another takes over a minute, regardless of the size of the file. When the default handler is set to another program, like Nuance or PDF Creator, this is instant. What in Adobe Reader is causing this and what can I do to speed up file moving? Any help will be greatly appreciated. Thank you.

I am using Windows 7 home edition and using Internet Explorer 10
The PDF's are online on websites that I am trying to open. Both on the site as well as trying in a new window.
Thank you
Jeff

HT1338 My fuji x100s has RAW file compatibility issue with OS 10.8.2

My fuji x100s has RAW file compatibility issue with OS 10.8.2, my iphoto11 cannot recognise the file format. Anyone know of this issue too? Appreciate if anyone can offer some helps. Thanks

Correct. The Fuji X-100s is not currently supported by iPhoto or Aperture (or the RAW converter in OS X itself). You can submit feedback via iPhoto and request this.

File name replaced with Tilde (~), name already exists error

When exporting jpg files in Lightroom 4 I've recently had an issue with some of the files containing a tilde (~), the 43rd file in the series often gets it as well as a few others. So in the series one might be named 43-MA~1.jpg instead of the 43-Maegan-details.jpg that I originally named the file.
When I've tried to rename these files from the finder I get the error "name already exists". If I rename it to something totally different it works but if I then try to rename it the original filename I wanted it gives me the error again or reverts to the name with the ~.
I'm running 10.6.8, and the problem has been happening the past few weeks but I've never had the problem before. I can't figure out what is causing the problem and it's not every export but it's a huge hassle to try and rename the files.

This is the one error message that I have gotten in years with Encore. In my case, I had created a Project to be used as a "template," and had done the layout, Imported the common Assets, and then used this as the basis for a 17 DVD set, just Importing the unique Assets to each. Everything went perfectly, until disc 15. Maybe I was sloppy, as I had just completed 14 such Projects that day, but when I went to Build, I got that error. I tried un-Linking and re-Linking Assets, and checked all Menus. Nothing - just that error. Flushed Media Cache, and only the error. I posted here, with the details and asking for ideas.
In the meantime, I just grabbed my "template" Project and Imported those same, unique Assets. Used my altered Menus from bad Project and did my linking, exactly (or so I thought) as I had just done. This time, the Build was successful and # 15 thru 17 went without a hitch.
I had Saved that bad Project, and several folk offered suggestions. I tried them all, but never could get it to Build. I always got that error. I finally gave up testing and chalked it up to OE on my part, but I never figured out what I had done wrong, as I really thought that it was by the numbers.
Based on my experience, I would just start a new Project, being careful in the workflow. That was the only thing that worked for me.
Good luck,
Hunt

File name issue in mail adapter attachement.

HI all,
i built a scenario proxy to mail in which the data will be sent as attachement to the mail id coming from proxy it self.
I added the transform bean and xi mail adapter bean correctly..
The scenario is working fine without errors...
however the issue is. i have given the file name in for module key :
Transform = Transform.ContentDisposition = attachement;filename="xyz.csv"
but while testing the attachement is coming as "untitled.txt"
i need the attachement to be named as "xyz.csv" only.
where went wrong ...please give ur inputs.
Thanx.

Hi Kiran
Then there is no need to use Transformation bean for this
In Mapping map the mail package Content_type field with
text/plain;name="xyz.csv"
and select mail package and keep attachments in receiver mail adapter
This will work
Thanks
Gaurav

File name substitution with Data pump

Hi,
I'm experimenting with Oracle data pump export, 10.2 on Windows 2003 Server.
On my current export scripts, I am able to create the dump file name dynamically.
This name includes the database name, date, and time such as the
following : exp_testdb_01192005_1105.dmp.
When I try to do the same thing with data pump, it doesn't work. Has anyone
had success with this. Thanks.
ed lewis

Hi Ed
This is an example for your issue:
[oracle@dbservertest backups]$ expdp gsmtest/gsm directory=dpdir dumpfile=exp_testdb_01192005_1105.dmp tables=ban_banco
Export: Release 10.2.0.1.0 - Production on Thursday, 19 January, 2006 12:23:55
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
Starting "GSMTEST"."SYS_EXPORT_TABLE_01": gsmtest/******** directory=dpdir dumpfile=exp_testdb_01192005_1105.dmp tables=ban_banco
Estimate in progress using BLOCKS method...
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
Total estimation using BLOCKS method: 64 KB
Processing object type TABLE_EXPORT/TABLE/TABLE
Processing object type TABLE_EXPORT/TABLE/INDEX/INDEX
Processing object type TABLE_EXPORT/TABLE/CONSTRAINT/CONSTRAINT
Processing object type TABLE_EXPORT/TABLE/INDEX/STATISTICS/INDEX_STATISTICS
Processing object type TABLE_EXPORT/TABLE/COMMENT
Processing object type TABLE_EXPORT/TABLE/CONSTRAINT/REF_CONSTRAINT
Processing object type TABLE_EXPORT/TABLE/STATISTICS/TABLE_STATISTICS
. . exported "GSMTEST"."BAN_BANCO" 7.718 KB 9 rows
Master table "GSMTEST"."SYS_EXPORT_TABLE_01" successfully loaded/unloaded
Dump file set for GSMTEST.SYS_EXPORT_TABLE_01 is:
/megadata/clona/exp_testdb_01192005_1105.dmp
Job "GSMTEST"."SYS_EXPORT_TABLE_01" successfully completed at 12:24:18
This work OK.
Regards,
Wilson

Refinement Panel show "file name" values with question mark instead of spaces

Hi,
I customized Refinement Panel to refine by file name. In some cases the value (file name) is shown with question mark instead of space. It looks like gibberish and the refine by that value doesn't bring the result.
Any ideas how to solve?
keren tsur

Hi Keren,
Please try to reset index in Central Administration > Application Management > Manage service applications > click the Search service application > Crawling > Index Reset > check the box Deactivate search
alerts during reset > Reset Now > Ok.
Then restart a full crawl in the Central Administration > Application Management > Manage service applications > click the Search service application > Crawling > Content Sources.
In addition, please capture a screenshot of the issue.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Regards,
Rebecca Tu
TechNet Community Support

Report file name error with Chinese Date format

Hello,
I am seeing an error at
step Write UUT report in the standard model files. This step is
calling the API method save on the object Runstate.Report.
The issue occurs on computers using chinese localization with the date in the report file name.
Is this a known issue? Is there a way to modify the filename before calling the above method to eliminate the problem?
Solved!
Go to Solution.

An Error Message is attached.
WE have seen this on both Vista and XP. We are using TestStand version 4.1.1. I am not sure about the localization, but I have seen this on computers from Taiwan, Korea and Japan.
If I put a breakpoint in the Model file at the Write UUT Report Step, you can see Chinese Characters in the time portion of the file name.
If you change the report name to not include the time and date, the error does not occur.
We have seen this with ASCII and xml. With XML, the error also occurs at the step "Add Root Tags to XML Report"
Attachments:
FileNameError.JPG ‏134 KB

Flex file upload issue with large image files

     Hello, I have created a sample flex application to upload an image and also created java servlet to upload and save image and deployed in local tomcat server. I am testing the application in LAN. I am able to upload small as well as large image file(1Mb) from some PCs but in some other PCs I am getting IOError while uploading large image files however it is working fine for small images. Image uploading is hanging after 10%-20% and throwing IOError. *Surprizgly it is working Ok with XP systems and causeing issues with Windows7 systems*.
Plz give me any idea to get a solution.
In Tomcat server side it is giving following error:
request: org.apache.catalina.connector.RequestFacade@c19694
org.apache.commons.fileupload.FileUploadBase$IOFileUploadException: Processing of multipart/form-data request failed. Stream ended unexpectedly
        at org.apache.commons.fileupload.FileUploadBase.parseRequest(FileUploadBase.java:371)
        at org.apache.commons.fileupload.servlet.ServletFileUpload.parseRequest(ServletFileUpload.ja va:126)
        at flex.servlets.UploadImage.doPost(UploadImage.java:47)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:637)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
        at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.j ava:290)
        at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
        at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
        at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
        at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
        at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
        at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
        at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:293)
        at org.apache.coyote.http11.Http11AprProcessor.process(Http11AprProcessor.java:877)
        at org.apache.coyote.http11.Http11AprProtocol$Http11ConnectionHandler.process(Http11AprProto col.java:594)
        at org.apache.tomcat.util.net.AprEndpoint$Worker.run(AprEndpoint.java:1675)
        at java.lang.Thread.run(Thread.java:722)
Caused by: org.apache.commons.fileupload.MultipartStream$MalformedStreamException: Stream ended unexpectedly
        at org.apache.commons.fileupload.MultipartStream$ItemInputStream.makeAvailable(MultipartStre am.java:982)
        at org.apache.commons.fileupload.MultipartStream$ItemInputStream.read(MultipartStream.java:8 86)
        at java.io.InputStream.read(InputStream.java:101)
        at org.apache.commons.fileupload.util.Streams.copy(Streams.java:96)
        at org.apache.commons.fileupload.util.Streams.copy(Streams.java:66)
        at org.apache.commons.fileupload.FileUploadBase.parseRequest(FileUploadBase.java:366)
UploadImage.java:
package flex.servlets;
import java.io.*;
import java.sql.*;
import java.util.*;
import java.text.*;
import java.util.regex.*;
import org.apache.commons.fileupload.servlet.ServletFileUpload;
import org.apache.commons.fileupload.disk.DiskFileItemFactory;
import org.apache.commons.fileupload.*;
import sun.reflect.ReflectionFactory.GetReflectionFactoryAction;
import javax.servlet.*;
import javax.servlet.http.*;
public class UploadImage extends HttpServlet{
         * @see HttpServlet#doGet(HttpServletRequest request, HttpServletResponse
         *      response)
        protected void doGet(HttpServletRequest request,
                        HttpServletResponse response) throws ServletException, IOException {
                // TODO Auto-generated method stub
                doPost(request, response);
        public void doPost(HttpServletRequest request,
                        HttpServletResponse response)
        throws ServletException, IOException {
                PrintWriter out = response.getWriter();
                boolean isMultipart = ServletFileUpload.isMultipartContent(
                                request);
                System.out.println("request: "+request);
                if (!isMultipart) {
                        System.out.println("File Not Uploaded");
                } else {
                        FileItemFactory factory = new DiskFileItemFactory();
                        ServletFileUpload upload = new ServletFileUpload(factory);
                        List items = null;
                        try {
                                items = upload.parseRequest(request);
                                System.out.println("items: "+items);
                        } catch (FileUploadException e) {
                                e.printStackTrace();
                        Iterator itr = items.iterator();
                        while (itr.hasNext()) {
                                FileItem item = (FileItem) itr.next();
                                if (item.isFormField()){
                                        String name = item.getFieldName();
                                        System.out.println("name: "+name);
                                        String value = item.getString();
                                        System.out.println("value: "+value);
                                } else {
                                        try {
                                                String itemName = item.getName();
                                                Random generator = new Random();
                                                int r = Math.abs(generator.nextInt());
                                                String reg = "[.*]";
                                                String replacingtext = "";
                                                System.out.println("Text before replacing is:-" +
                                                                itemName);
                                                Pattern pattern = Pattern.compile(reg);
                                                Matcher matcher = pattern.matcher(itemName);
                                                StringBuffer buffer = new StringBuffer();
                                                while (matcher.find()) {
                                                        matcher.appendReplacement(buffer, replacingtext);
                                                int IndexOf = itemName.indexOf(".");
                                                String domainName = itemName.substring(IndexOf);
                                                System.out.println("domainName: "+domainName);
                                                String finalimage = buffer.toString()+"_"+r+domainName;
                                                System.out.println("Final Image==="+finalimage);
                                                File savedFile = new File(getServletContext().getRealPath("assets/images/")+"/LowesFloorPlan.png");
                                                //File savedFile = new File("D:/apache-tomcat-6.0.35/webapps/ROOT/example/"+"\\test.jpeg");
                                                item.write(savedFile);
                                                out.println("<html>");
                                                out.println("<body>");
                                                out.println("<table><tr><td>");
                                                out.println("");
                                                out.println("</td></tr></table>");
                                                try {
                                                        out.println("image inserted successfully");
                                                        out.println("</body>");
                                                        out.println("</html>");
                                                } catch (Exception e) {
                                                        System.out.println(e.getMessage());
                                                } finally {
                                        } catch (Exception e) {
                                                e.printStackTrace();

It is only coming in Windows 7 systems and the root of this problem is SSL certificate.
Workaround for this:
Open application in IE and click on certificate error link at address bar . Click install certificate and you are done..
happy programming.
Thanks
DevSachin

File Name Issues while on Network.

I have a Powermac G4 at my office and I am having a huge issue with file names that are on the network for my office. The mac is connected onto the network with dell servers running windows server 2003.
The problem I am having is that the Mac wont recognize any of the file names correctly. example, say i have a document title MACFORUM.docx now on any PC's in the office that name is displayed correctly. But on my mac it appears to be returned to something similar to the dos 8.3 naming convention. So what i see on screen is some like ~9535451.MAC. Obviously this is not a real file just an exmaple.
If any one could please shed some light on to why this would be happening i would really appreciate it.
Oh and some backround on the issue is that it just recently started happening after the install of adobe CS3. I have contacted adobe and it is not on there end and i have re-installed the software with no avail. so any one with any idea i greatly welcome it and apprec

How are you connecting to the server? Using Windows file sharing with an "smb" connection? Or does the server have file services for Macintosh enabled so you're connecting with an "afp" address? Do you see these file names in the Finder? Or are you seeing it the open/save dialog boxes in your Adobe programs?
We have lots of Macs at the office (most have 10.4.x but we're moving to 10.5.x) and we share Adobe files from Windows 2003 servers without a problem seeing the correct file names. So, I don't think you should have a problem like that.
-Doug

File name end with *

Hi ,
While working with files i found that a new file is always ends with "*"
i.e
suppose if my file name is abc.txt
then my solris box displays it as abc.txt*.
It is creating problem while creating and reading files.
Please suggest , how can i get away with this "*" .
Thanks

(Not sure what the relation is to the compiler, maybe ask on opensolaris instead?)
KabhiNahin wrote:
While working with files i found that a new file is always ends with "*"Created how?
i.e
suppose if my file name is abc.txt
then my solris box displays it as abc.txt*.Displayed how?
If you create files with execution permission, "ls" is often configured to print it with a trailing '*', just like it adds / for a directory, @ for a symlink, etc. man ls to disable it.
It is creating problem while creating and reading files.What problem when you read the files how? It is hard to answer a question without some information...

Dynamic File Name issue

Hi All,
My scenario is File to File.
The source file contains cusomer bill to information of multiple sales organization( A,B,C,D...)
now my requiremnt is to create 1 output files for each sales organization and each sales organization should have corresponding cutomer bill to information... and also the file name should be
salesorganization+sourcefiled1+sourcefiled2
I have used the DynamicFile name, but its always creating only 1 file "and thats for A".. with corresponding records of A,
below is my code
String Outputfile = "";
try {
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String filename = a+b+c;
Outputfile = conf.put(key, filename);
}catch (java.lang.NullPointerException e) {
Outputfile = "FileName";
return Outputfile;
any idea.. guyz.. why its creating 1 file always.. do i need to change anything in my code???
Biplab

Hi,
If it is an array (see whetehr you are having String[] in the udf declaration part) then you can access the elements inside it by a[0] or a[1] etc...
Do a display queue for the three input nodes of the UDF and see where the values are. If there is single value it shoudl be a[0], b[0] and c[0]
Regards
Suraj

Email PDF file name issue via output determination - order confirmation etc

Hi,
I can email pdf files via output determination. Unfortunately the file name is same as sapscript name. How do I change it to the name I want for example document number.
Thanks,
Jai

Hi Jaideep,
You can change the mail title at Output determination.
T/code NACE--> Application > Outputtype> Select O/P --> select Mail title and texts --> specify your text( with language) in "title" .
Whenever Script send via e-mail the text you have entered will apear as mail title.
Hope this may help you.
Lanka

File name issues with Relocated Masters

Similar Messages

Maybe you are looking for