File operation error
Hi All.
I had a problem, and i can't understand where that from.
I have a filio with a tons of MSO in the same page, including scrollable fram into some of them and URL links too.
I tried to remove scrollable fram, and then URL but nothing happen.
When I copy and past all my MSO in another doc, it works well, but I couldn't fix this error.
Plz see attached file
Some have some advices for where that from?
Merci
Are you sure the data is correct ? Have you tried with any other file(or just remove last two line of this file)?
"Error while reading native data." comes in two scenario. Either the data in a receiving file is in incorrect format. Or the problem with schema that is used to read file.
Similar Messages
-
I am trying to do an export of a sample database i have running
on Oracle8i on Windows 2000 professional.
Whenever I schedule a job, it fails with the message 'VNI-2002 :
File Operation Error".
What should I do to elliminate this problem?
thanks a bunch.I have done as follows:
Verify that sufficient permission is granted to createfiles in the $ORACLE_HOME/network/agent directory
If connecting from a client, drop the node and rediscover
I also created an OS user (oraJob) with permissions:
read/write permissions to the $ORACLE_HOME\Net80 or $ORACLE_HOME/network directory and all of its sub directories, read/write permissions to the $TEMP directory, as described in Oracle Books.
Updated the preferred credentials with this user on the node.
Assign IMP_FULL_DATABASE to the DBA role
Assign all necessary privileges to the IMP_FULL_DATABASE role
These steps cleared up many things but unfortunately I'm still stuck with a VNI-2002 error, although (according to my logic) I have all the necessary permissions to access the jobq etc. There's almost nothing out in the Internet community relating to the VNI-2002. Apart from sites hosting Oracle Books I have only encountered two (this one posted here) and another via yahoo, complaining about it. None has a suitable explanation, that is one that could guide you onto the real cause.
So for now I still searching... -
Hi Folks,
I was trying to save basic search template master page "seattle.master" after making change to the template.
I have added just "CompanyName" folder and update the line below in seattle.master.
Change is this : <SharePoint:CssRegistration Name="Themable/CompanyName/corev15.css" runat="server"/>
When I save it, and refresh page on browser, it shows "Something went wrong" error.
ULS says the following error : "UserAgent not Available, file operation may not be optimized"
Pls let us know if there is a solution.
Any help Much appreciated !
Thanks,
Sal
Hi Salman,
Thanks for posting this issue,
Just remove this below given tag and check out. It might be happened that your control is conflicting with others.
Also, browse the below mentioned URL for more details
http://social.msdn.microsoft.com/Forums/office/en-US/b32d1968-81f1-42cd-8f45-798406896335/how-apply-custom-master-page-to-performance-point-dashboard-useragent-not-available-file?forum=sharepointcustomization
I hope this is helpful to you. If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh -
Filestream Creation Unable to Open Physical File Operating System Error 259
Hey Everybody,
I have run out of options supporting a customer that is having an error when creating a database with a file stream. The error displayed is unable to open physical file operating system error 259 (No more data is available). We're using a pretty
standard creation SQL script that we aren't having issues with other customers:
-- We are going to create our data paths for the filestreams.
DECLARE @data_path nvarchar(256);
SET @data_path = (SELECT SUBSTRING(physical_name, 1, CHARINDEX(N'master.mdf', LOWER(physical_name)) - 1)
FROM master.sys.master_files
WHERE database_id = 1 AND file_id = 1);
-- At this point, we should be able to create our database.
EXECUTE ('CREATE DATABASE AllTables
ON PRIMARY
NAME = AllTables_data
,FILENAME = ''' + @data_path + 'AllTables_data.mdf''
,SIZE = 10MB
,FILEGROWTH = 15%
FILEGROUP FileStreamAll CONTAINS FILESTREAM DEFAULT
NAME = FSAllTables
,FILENAME = ''' + @data_path + 'AllTablesFS''
LOG ON
NAME = AllTables_log
,FILENAME = ''' + @data_path + 'AllTables_log.ldf''
,SIZE = 5MB
,FILEGROWTH = 5MB
GO
We are using SQL Server 2014 Express. File streams were enabled on the installation SQL Server. The instance was created successfully and we are able to connect to the database through SSMS. The user is using an encrypted Sophos.
We have tried the following:
1. Increasing the permissions of the SQL Server server to have full access to the folders.
2. Attempted a restore of a blank database and it failed.
There doesn't seem to be any knowledge base articles on this particular error and I am not sure what else I can do to resolve this. Thanks in advance for any help!Hi Ryan,
1)SQL Server(any version) can't be installed on encrypted drives. Please see a similar scenario in the following link
https://ask.sqlservercentral.com/questions/115761/filestream-and-encrypted-drives.html
2)I don't think there is any problem with permissions on the folder, if the user can create a database in the same folder. Am not too sure. Also see the article by
Jacob on configuring the FILESTREAM for SQL Server that describes how to configure FILESTREAM access level & creating a FILESTREAM enabled database
Hope this helps,
Thanks
Bhanu -
Hi guys,
I'm new here and just have browsed
some of the related topics here regarding my problem but could not seem
to find anything to help me fix this problem so I decided to post this.
I currently have a saved waveform from an oscilloscope that is quite
big in size(around 700MB, CSV file format) and I want to view this on
my PC using SignalExpress. Unfortunately when I try to load the file
using "Load/Save Signals -> Load From ASCII", I always get the "Not
enough memory to complete this operation" error. How can we view and
analyze large waveform files in SignalExpress? Is there a workaround on
this?
Thanks,
Louie
P.S.>I'm very new to Signal Express and haven't modified any settings on it.Hi Louie,
Are you encountering a read-only message when you tried to save the boot.ini file? If so, you can try this method: right-click on My Computer >> Select "Properties", and go to the "Advanced" tab. Select "Settings", and on the next screen, there is a button called Edit. If you click on Edit you should be able to modify the "/3GB" tag in boot.ini. Are you able to change it in this manner? After reboot, you can reload the file to see if it helps.
To open a file in SignalExpress, a contiguous chunk of memory is required. If SignalExpress cannot find a contiguous memory chunk that is large enough to hold this file, then an error will be generated. This can happen when fragmentation occurs in memory, and fragmentation (memory management) is managed by Windows, so unfortunately this is a limitation that we have.
As an alternative, have you looked at NI DIAdem before? It is a software tool that allows users to manage and analyze large volumes of data, and has some unique memory management method that lets it open and work on large amounts of data. There is an evaluation version which is available for download; you can try it out and see if it is suitable for your application.
Best regards,
Victor
NI ASEAN
Attachments:
Clipboard01.jpg 181 KB -
Hey People,
Ive set up an SSL Clientless VPN on the Cisco 2821. Ive set up WINS, and the NBNS entries in the VPN config. When i log onto the VPN , i can access the file servers by typing in their names in the network fi
le box, but when i click browse network and select the network name i get the following message
"The following error occurred while attempting the file operation:
Unable to view the contents of the Domain/Workgroup. "
Has anyone come accross this before?
Im using Windows Server 2008R2 for the DC, Windows Server 2003 R2 For WINS and File Sharing.
The connection goes WAN->BROADBANDROUTER>CISCO2821
Any helo would be much greatly appreciated.
Thanks in advance!Please see old threads which discuss the same topic -- http://forums.oracle.com/forums/search.jspa?threadID=&q=An+error+occurred+while+attempting+to+establish+an+Applications+File+Server+connection+with+the+node&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein -
"Operating system file operation on file IFile failed" error.
Hi there,
Does someone got a clue about the error "Operating system file operation on file IFile failed" occurring from time to time when scheduling Webi and Deski reports?
This occurs on a cluster environment with 2 servers (BOXI R2 SP2).
Regards,
JeffHi Jeff,
-This error is usually associated with the system not being able to access the FRS when
BOE is trying to read the report.
-Also, could you please check that your document names should not have dot (.)
-It's also possible this could be permissions related could you please monitor the
system for any 'access denied' results and see if this is related to permissions.
Regards,
Sarbhjeet Kaur -
Archive file with errors in sender file adapter not working! please help!
Hi Experts,
I have a file to RFC scenario. the input is a XML file. I have setup the flag in sender file adapter channel for archiving the input files with errors. But it is not working.
For testing I have used an invalid xML file for example without the main XML tag. I have also tested with a MSWORD file saved with.xml extension. But in both the cases the files are not getting archived.
My archive location permissions are fine and in fact normal archive operation is happening. That is, if I select the processing mode as "Archive" and gave the Archive directory then files are getting archived. The problem is only with the "Archive faulty source files" option.
What am I missing? DO I need to do some more configurations?
What are the prerequisites if any for this option?
How to test this?
Please help me! I will be greatfull to you all!
Thanks & Regards
Gopaland go thru this links
Creating a Single Archive of the Version Files
http://help.sap.com/saphelp_nw04/helpdata/en/79/1e7aecc315004fb4966d1548447675/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/31/8aed3ea86d3d67e10000000a114084/frameset.htm
Note: reward points if solution found helpfull
Regards
Chandrakanth.k -
Download Helper Screen Capture worked to capture video if the default "no audio" option is active. But, no audio. The "speakers" or "microphone" audio options are confusing....the audio to be captured is from the video, so what do you choose? With either "speakers" or "microphone" selected, the captured file has poor audio and no video. Re-capture efforts (speakers) get "Invalid capture file error" and "File Creation error- Unable to rename/copy audio file"
The paid upgrade of "Converter" doesn't work.
Instructive documentation - not very good.
Suggestions - Need time delay between initiation of "Record" and starting the video to be recorded.
Could use timer tracking of the record process.
Are there operating system limitations? (Have Windows XP Pro)That is an issue for the developer of that Download Helper.
-
Hi,
I face this error message when I try to 'process update' a dimention, sometime it works but sometime it failed with the error below:
Description: File system error: The record ID is incorrect. Physical file: . Logical file: .
My environment: Window Server 2008 R2+SQL Server 2008 R2.
Note: this issue can be resolved by full cube process, but I can't to that every time if it failed, just want to know what happen at backend of SSAS, It block me neary 2 week without any finding, really appreciate that someone can help on this.
I have do some research with google, I think the root cause here is not TopCount function(It may be a problem with SQL Server2005), also not the size limitation of 4GB size of .astore file.(I check the size of my cube under 'Data\XXX.db\' folder, which only
have few MB size).
Thanks,
TomHi Tom,
Here is a microsoft fix
FIX: "File system error" occurs when you try to run a process update operation on a dimension in Microsoft SQL Server 2008 Analysis Services and in Microsoft SQL Server 2008 R2 Analysis Services
In your acenario, in order to fix this issue, please apply the latest Cumulative update and Service Pack according to your SQL Server version. Besides, there are two workarounds in that fix, plese try it and check if it works or not.
http://support.microsoft.com/default.aspx?scid=kb;en-US;2276495
Regards,
Charlie Liao
TechNet Community Support -
ACS v5.2 - Unable to update User integer attributes through File Operations
Hi,
I have created some internal users on ACS v5.2 and added some Unsigned Integer attributes for each user. I am trying to do a bulk update of these integer attributes using the File Operation facility. However no matter what number I put on the import template it doesn't get updated and displays a "0" in the user config.
The import template is validated successfully with no errors and also the string attributes are updated correctly.
There is a sort of work around of deleting the users and adding them back in with the updated values. But this is not feasible as it would reset their passwords. I have also tried saving the csv file in Open Ofifce instead of Excel
Has any one else come across this problem?
(I am unable to see this issue in the Release notes or Bug tool kit although there is a similar issue when updating devices in CSCth68051)Hi,
Thanks for the reply. I have managed to recreate the problem to show you but it is a bit more complicated than I first thought. The problem only occurs when the integer attributes are added after the user is created.
I created a dummy user. The MTL and TLS attributes were present before the user was added. I then added the XXX and ZZZ attributes afterwards and assigned them default values. The default values show up in the GUI config.
However when I export the database to a csv file only the values of the MTL and TLS attributes show up in the export file:
I then downloaded an import template and updated the integer values for TLS,MTL, XXX and ZZZ for the dummy user:
The file imports successfully with no errors. However, when I display the user config only the MTL and TLS attributes have changed. The XXX and ZZZ attributes have stayed the same.
I thought it might be because I was assigning a default value of 0 to the new attributes but I assigned ZZZ a default value of 1 and the same thing occurred. -
hi
As shown in the scenario (sc1) screencast at http://screencast.com/t/GA7OcgYZ
the JDeveloper 11.1.2.0.0 Version Application wizard can fail sometimes, showing a "File Backup Error" dialog, with the message
"Failed attempting to back up imported resource
D:\screencast\VersionAppLockedIssueApp-v0.01\VersionAppLockedIssueApp\Model.
Check that there are no file system explorers viewing files in this location and that none of the files are open in other applications before resuming."
This even occurs when there are no other processes (like Windows Explorer or an editor) using/locking the file.
It should be possible to reproduce the behaviour using the example application
at http://www.consideringred.com/files/oracle/2011/VersionAppLockedIssueApp-v0.01.zip
which is really nothing special I think, so it might also reproduce using another application.
First open the application and also open the file "browseEmployees.jsf" in design view.
After that, as it seems, the Version Application wizard fails.
Note that it might be relevant that I am using Windows 7, as I can imagine that this could behave differently when using JDeveloper on other operating systems.
Also note, if I try to ZIP the application folder (instead of using the Version Application wizard) after opening the file "browseEmployees.jsf" in design view, I get a message like "WARNING: The process cannot access the file because it is being used by another process.
: D:\screencast\VersionAppLockedIssueApp-v0.01\VersionAppLockedIssueApp\.data\00000000\je.lck ",
as can be seen in the scenario (sc2) screencast at http://screencast.com/t/rFiL47Bil
As it seems that the Version Application wizard has managed to commit the source files, one workaround could be to checkout the source in another location and continue working there.
Other suggestions to avoid this issue, or deal with it, are welcome.
questions:
- (q1) Can this "File Backup Error" behaviour for the Version Application wizard be reproduced?
- (q2) How can this "File Backup Error" behaviour for the Version Application wizard be explained?
many thanks
Jan Verveckenfyi
Today I noticed that there is a My Oracle Support note about this:
- note id 1353389.1 , "In JDeveloper11.1.2.0.0 the Version Application Wizard Failed with the Error: File Backup Error "
Its "Solution" section currently says:
"The problem is still investigated by development.
But there is a possible workaround for Bug 12912410 by unchecking the checkbox 'Perform Checkout' in step 5 of 6 in the wizard screen. "
regards
Jan -
USB Drive Resets during file copy, interrupting file operations
Fresh Arch Linux install, working USB thumb drive (Windows, previous Arch Linux setups, etc.), formatted FAT32.
Seems to randomly reset, eject, and auto-re-mount during extensive file operations (i.e. copying 4gb worth of 800 files from the USB thumb drive to disk).
I've tried various USB ports to no avail; no external hub being used.
Thoughts? Not sure where to begin diagnosing:
dmesg:
usb 1-1: configuration #1 chosen from 1 choice
scsi17 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 15
usb-storage: waiting for device to settle before scanning
scsi 17:0:0:0: Direct-Access OCZ RALLY2 1100 PQ: 0 ANSI: 0 CCS
sd 17:0:0:0: Attached scsi generic sg2 type 0
usb-storage: device scan complete
sd 17:0:0:0: [sdb] 31326208 512-byte logical blocks: (16.0 GB/14.9 GiB)
sd 17:0:0:0: [sdb] Write Protect is off
sd 17:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 17:0:0:0: [sdb] Assuming drive cache: write through
sd 17:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 17:0:0:0: [sdb] Assuming drive cache: write through
sd 17:0:0:0: [sdb] Attached SCSI removable disk
usb 1-1: reset high speed USB device using ehci_hcd and address 15
sd 17:0:0:0: [sdb] Unhandled error code
sd 17:0:0:0: [sdb] Result: hostbyte=0x07 driverbyte=0x00
end_request: I/O error, dev sdb, sector 7589504
sd 17:0:0:0: [sdb] Unhandled error code
sd 17:0:0:0: [sdb] Result: hostbyte=0x07 driverbyte=0x00
end_request: I/O error, dev sdb, sector 7589744
sd 17:0:0:0: [sdb] Unhandled error code
sd 17:0:0:0: [sdb] Result: hostbyte=0x07 driverbyte=0x00
end_request: I/O error, dev sdb, sector 7589776
usb 1-1: USB disconnect, address 15
FAT: bread failed in fat_clusters_flush
FAT: FAT read failed (blocknr 3805)
FAT: Directory bread(block 24147944) failed
FAT: FAT read failed (blocknr 3818)
<snip lots of repeats>
FAT: FAT read failed (blocknr 4032)
FAT: bread failed in fat_clusters_flush
FAT: bread failed in fat_clusters_flush
FAT: bread failed in fat_clusters_flush
usb 1-1: new high speed USB device using ehci_hcd and address 16
usb 1-1: configuration #1 chosen from 1 choice
scsi18 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 16
usb-storage: waiting for device to settle before scanning
scsi 18:0:0:0: Direct-Access OCZ RALLY2 1100 PQ: 0 ANSI: 0 CCS
sd 18:0:0:0: Attached scsi generic sg2 type 0
usb-storage: device scan complete
sd 18:0:0:0: [sdb] 31326208 512-byte logical blocks: (16.0 GB/14.9 GiB)
sd 18:0:0:0: [sdb] Write Protect is off
sd 18:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 18:0:0:0: [sdb] Assuming drive cache: write through
sd 18:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 18:0:0:0: [sdb] Assuming drive cache: write through
sd 18:0:0:0: [sdb] Attached SCSI removable disk
lsusb -v for the drive:
Bus 001 Device 016: ID 0325:ac02 OCZ Technology Inc ATV Turbo / Rally2 Dual Channel USB 2.0 Flash Drive
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0325 OCZ Technology Inc
idProduct 0xac02 ATV Turbo / Rally2 Dual Channel USB 2.0 Flash Drive
bcdDevice 11.00
iManufacturer 1 OCZ Technology
iProduct 2 RALLY2
iSerial 3 AA04012700275633
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 300mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk (Zip)
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 255
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 255
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
Last edited by lieut_data (2009-12-26 17:39:56)Jithin wrote:
When ever I copy some files or create a file in my external USB drive which is a FAT32 one. file permissions are not preserved.
From <http://support.apple.com/kb/HT3764>:
"The MS-DOS (FAT32) file system format does not support permissions, file owners, and groups. Such permissions are synthesized on Mac OS X with some default permissions. Because of this all files will have the same permissions […]"
So it's not "how it work in mac", but it's a limitation of the FAT32 file system. -
File missing (file\BCD error code 0Xc0000034 help need for work!
file missing (file\BCD error code 0Xc0000034 help need for work! what can i do?
have an p 2000 notebook pcHi bobkunkle, welcome to the HP Forums. I understand you cannot boot passed the error you are receiving.
What is the model or product number of your notebook? What version of Windows is installed?
Guide to finding your product number
Which Windows operating system am I running?
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping! -
Unable to run a Batch File Operating System Command
Using XI 3.0, I am unable to run a Batch File Operating System Command After Message Processing.
My Batch file:
gpg -se -r BOA3RSKY --armor --passphrase-fd 0 %1 < C:\Progra~1\GNU\GnuPG\gpgin
My Command Line (ID scenario)
exec "cmd.exe /c C:\Progra~1\GNU\GnuPG\boagpg.bat %F"
If I execute
exec "cmd.exe /c type C:\Progra~1\GNU\GnuPG\boagpg.bat >xis.txt"
It displays the contents of boagpg.bat file in xis.txt.
I just don't understand why when I run the batch file, I would expect an %F.asc encrypted file in the same directory as the %F unencrypted file.
Any ideas?
or will I need Basis to create commands that will allow me to run GPG from XI Command Line?Check this links if its helpful
http://help.sap.com/saphelp_nw04/helpdata/en/bb/c7423347dc488097ab705f7185c88f/frameset.htm
/people/sap.user72/blog/2004/01/30/command-line-help-utility
Check this thread a similar problem
Process Integration (PI) & SOA Middleware
Note 841704 - XI File & JDBC Adapter: Operating system command
http://service.sap.com/sap/support/notes/841704
Try to see the below links
/people/michal.krawczyk2/blog/2005/08/17/xi-operation-system-command--error-catching
OS Command on FTP
OS command line script - Need help
FTP - Run OS Command before file processing
Note: reward points if solution found helpfull
Regards
Chandrakanth.k
Maybe you are looking for
-
G5 tower - no good... what should I do?
Lightning striked my dual G5 tower. I brought to the place and was told that I need new logic board and hard drive. They are no good. I struggled to make decision so I went ahead to buy MacPro. I still have G5. I don't know what to do with it. Should
-
Internet looks fine, but isn't.
I have a macbook, running 10.6.7 and nothing else is wrong with it (assuming the problem is not elsewhere) My computer is on a local network through the house and connected to a hub. When I plug in I can see other computers and I get an ip, however I
-
Client to Server upload: File size limit
Hi, I am utilising java sockets to set up 2 way communication between a client and server program. I have successfully transferred files from the client to the server by writing/using the code shown below. However I now wish to place a limit on the s
-
ODI 12c Reusable Mapping Concept
Hello everyone, I need and want to learn ODI. Using 12.1.2 edition, the problem is now about reusable mappings. The only thing found in google is the definition, there is no samples about how to use it! Google does not help me, can you? Please, Thank
-
I have 2 computers. both have the very same software: winxp pro 2002, office 2003. The desktop has a particular KBxxxxxxxxx file and DOES open .docx files. The other computer does not have that particular KB file and does not open .docx files. I rem