File processing issue

All,
I am using a file - file scenario.The file adapter is picking up all my files from the source directory and i see successfully processed in Tcode sxmb_moni.
But the files are not delivered to my target location.
Any ideas.
Thanks,
Nandini

Hi Nandini,
If you want to find the exact error about this check the CC monitoring in Receiver side and log. so that it will say what could be the problem
I hope you have problem with the Receiver CC FCC parameters. Double check them.
If you want to see the CC monitoring, you can see them using RWB->adapte->CC monitoring
Warm Regards,
Vijay

Similar Messages

Large file processing issue

Hi,
A 2MB source file is found to be generating a file of over 180 MB causing it to fail in pre prod and production. The processes successfully in Development Box where there is no web dispatcher or restrictions on size.
The recommendation from SAP is that we try to reduce the outout file size.
Kindly look into the issue ASAP.
Appreciate your help.
Thanks,
Satya Kumar

Hi Satya,
There are many ways are available check the below links
/people/stefan.grube/blog/2007/02/20/working-with-the-payloadzipbean-module-of-the-xi-adapter-framework
/people/aayush.dubey2/blog/2007/10/10/zip-transfer-unzip-increase-the-performance-of-your-java-abap-applications
/people/pooja.pandey/blog/2005/10/17/number-formatting-to-handle-large-numbers
/people/alessandro.guarneri/blog/2007/02/21/sap-xi-acting-as-a-huge-file-mover
/people/alessandro.guarneri/blog/2006/03/05/managing-bulky-flat-messages-with-sap-xi-tunneling-once-again--updated
One more way is we have to develope the ZIP Adapter and send the zip file after processing again we have to unzip the file.
Regards
Ramesh

File processing issue -File- PI- RFC

Dear Experts,
I have struck with this source file while processing the scenerio FTP(File) ->PI->RFC
I need to take the data from CSV file,
Just push the first row data to Char field and second row data to Mean field in RFC.
FCC structure:
The source data is simple but i struck with some logic,Kindly guide me how to process this data by using FCC or we can handle by mapping.Also check the source structure whether i followed correctly.
Best Regards,
Monikandan

Hi Amit,
Exactly i need to send the entire 1st row data to CHAR Description field and 2nd row data to mean field.
While i am testing in message mapping using the source file will getting the below output
Exact output i need is Process -001,Date row data will go to CHAR field and 10000,20-02-05 row data will go to MEAN field in RFC.
How to split it.kindly guide.
Best Regards,
Monikandan.

Huge size file processing in PI

Hi Experts,
1. I have seen blogs which explains processing huge files. for file and sftp
SFTP Adapter - Handling Large File
File/FTP Adapter - Large File Transfer (Chunk Mode)
Here also we have constrain that we can not do any mapping. it has to be EOIO Qos.
would it be possible, to process 1 GB size file and do mapping? which hardware factor will decide that sytem is capable of processing large size with mapping?
is it number of CPUs,Applications server(JAVA and ABAP),no of server nodes,java,heap size?
if my system if able to process 10 MB file with mapping there should be something which is determining the capability.
this kind of huge size file processing will fit into some scenarios. for example,Proxy to soap scenario with 1GB size message exchange does not make sense. no idea if there is any web service will handle such huge file.
2. consider pi is able to process 50 MB size message with mapping. in order to increase the performance what are the options we have in PI
i have come across these two point many times during design phase of my project. looking for your suggestion
Thanks.

Hi Ram,
You have not mentioned what sort of Integration it is.You just mentioned as FILE.I presume it is FILE To FILE scenario.In this case in PI 711 i am able to process 100MB(more than 1Million records ) file size with mapping(File is in the delta extract in SAP ECC AL11).In the sender file adapter i have chosen recordset per message and processed the messages in bit and pieces.Please note this is not the actual standard chunk mode.The initial run of the sender adapter will load the 100MB file size into the memory and after that messages will be sent to IE based on recordset per message.If it is more than 100MB PI Java starts bouncing because of memory issues.Later we have redesigned the interface from proxy to file asyn and proxy will send the messages to PI in chunks.In a single run it will sent 5000 messages.
For PI 711 i believe we have the memory limtation of the cluster node.Each cluster node can't be more than 5GB again processing depends on the number of Java app servers and i think this is no more the limitation from PI 730 version and we can use 16GB memory as the cluser node.
this kind of huge size file processing will fit into some scenarios. for example,Proxy to soap scenario with 1GB size message exchange does not make sense. no idea if there is any web service will handle such huge file.
If i understand this i think if it is asyn communication then definitely 1GB data can sent to webservice however messages from Proxy should sent to PI in batches.May be the same idea can work for Sync communication as well however timeouts in receiver channel will be the next issue.Increasing time outs globally is not best practice however if you are on 730 or later version you can increase timeouts specific to your scenario.
To handle 50 MB file size make sure you have the additional java app servers.I don't remember exactly how many app server we have in my case to handle 100 MB file size.
Thanks

Large file processing in file adapter

Hi,
We are trying to process a large file of ~280 MB file size and we are getting timeout errors. I followed all the required tunings for memory and heap sizes and still the problem exists. I want to know if installation of decentral adapter engine just for this large file processing might solve the problem which I doubt.
Based on my personal experience there might be a limitation of file size processing in XI may upto 100 MB with minimul mapping and no BPM.
Any comments on this would be appreciated.
Thanks
Steve

Dear Steve,
This might help you,
Topic #3.42
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/70ada5ef-0201-0010-1f8b-c935e444b0ad#search=%22XI%20sizing%20guide%22
/people/sap.user72/blog/2004/11/28/how-robust-is-sap-exchange-infrastructure-xi
This sizing guide & the memory calculations it will be usefull for you to deal further on this issue.
http://help.sap.com/bp_bpmv130/Documentation/Planning/XISizingGuide.pdf#search=%22Message%20size%20in%20SAP%20XI%22
File Adpater: Size of your processed messages
Regards
Agasthuri Doss

Java.lang.AssertionError: WSDL not found in the class file "processes

Hi,
I am using WLI 10.3 workshop to build process application. I have designed one JPD which inturn call another process JPD. So i have used worklist process control to create the process and tried to access the process. When i am executing the code, i am getting below error message.
13-Jun-2011 14:13:00 o'clock BST> <Error> <WLI> <BEA-000000> <Exception processing processes.ISPSSQMsgLisnt
Java.lang.reflect.InvocationTargetException
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at com.bea.wli.knex.runtime.core.dispatcher.DispUnit.loadDispFile(DispUnit.java:219)
Truncated. see log file for complete stacktrace
Java.lang.AssertionError: WSDL not found in the class file "processes.ISPSSQMsgLisnt", annotated class = processes.ISPSSQMsgLisnt
--ClassAnnotations:
--Method Annotations:
--Field Annotations:
can't continue
at com.bea.wli.knex.runtime.jws.dispatcher.JwsDispClass.<init>(JwsDispClass.java:392)
at com.bea.wli.bpm.runtime.JpdDispClass.<init>(JpdDispClass.java:65)
at com.bea.wli.bpm.runtime.JpdDispClass.<init>(JpdDispClass.java:55)
at com.bea.wli.bpm.runtime.JpdDispFile.createPrimaryDispClass(JpdDispFile.java:382)
at com.bea.wli.knex.runtime.core.dispatcher.DispFile.<init>(DispFile.java:154)
Truncated. see log file for complete stacktrace
xception processing processes.ISPSSQMsgLisnt
ava.lang.reflect.InvocationTargetException
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at com.bea.wli.knex.runtime.core.dispatcher.DispUnit.loadDispFile(DispUnit.java:219)
at com.bea.wli.knex.runtime.core.dispatcher.DispUnit.<init>(DispUnit.java:153)
at com.bea.wli.knex.runtime.core.dispatcher.DispCache.ensureDispUnit(DispCache.java:628)
at com.bea.wli.knex.runtime.core.dispatcher.DispCache.ensureDispUnitForURI(DispCache.java:1029)
at com.bea.wli.knex.runtime.core.dispatcher.DispCache.ensureDispUnitForURI(DispCache.java:950)
at com.bea.wli.broker.JWSSubscriber.getDispClass(JWSSubscriber.java:231)
at com.bea.wli.broker.JWSSubscriber.getRequest(JWSSubscriber.java:184)
at com.bea.wli.broker.JWSSubscriber.doDispatch(JWSSubscriber.java:358)
at com.bea.wli.broker.JWSSubscriber.doDispatch(JWSSubscriber.java:348)
at com.bea.wli.broker.SubscriptionDispatcher.doDispatch(SubscriptionDispatcher.java:87)
at com.bea.wli.broker.MessageBroker$PrivilegedSubscriptionDispatcher.run(MessageBroker.java:179)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at com.bea.wli.security.authentication.AuthenticationService.runAs(AuthenticationService.java:108)
at com.bea.wli.broker.MsgBrokerSecurityHelper.doDispatch(MsgBrokerSecurityHelper.java:231)
at com.bea.wli.broker.MessageBroker$PrivilegedSubscriptionDispatcher.doDispatch(MessageBroker.java:165)
at com.bea.wli.broker.MessageBroker.publishMessage(MessageBroker.java:984)
at com.bea.wli.mbconnector.jms.JmsConnMDB.publishMBMessage(JmsConnMDB.java:343)
at com.bea.wli.mbconnector.jms.JmsConnMDB.onMessage(JmsConnMDB.java:475)
at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:466)
at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:371)
at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:327)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4547)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:4233)
at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3709)
at weblogic.jms.client.JMSSession.access$000(JMSSession.java:114)
at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5058)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
aused by: java.lang.AssertionError: WSDL not found in the class file "processes.ISPSSQMsgLisnt", annotated class = processes.ISPSSQMsgLisnt
--ClassAnnotations:
--Method Annotations:
--Field Annotations:
can't continue
at com.bea.wli.knex.runtime.jws.dispatcher.JwsDispClass.<init>(JwsDispClass.java:392)
at com.bea.wli.bpm.runtime.JpdDispClass.<init>(JpdDispClass.java:65)
at com.bea.wli.bpm.runtime.JpdDispClass.<init>(JpdDispClass.java:55)
at com.bea.wli.bpm.runtime.JpdDispFile.createPrimaryDispClass(JpdDispFile.java:382)
at com.bea.wli.knex.runtime.core.dispatcher.DispFile.<init>(DispFile.java:154)
at com.bea.wli.knex.runtime.jws.dispatcher.JwsDispFile.<init>(JwsDispFile.java:24)
at com.bea.wli.bpm.runtime.JpdDispFile.<init>(JpdDispFile.java:108)
... 34 more

Hi
Are you using wli process control?
That uses wsdl and could cause the issue.
I also saw couple of internal bugs CR264315 and CR288904 on the same issue on 9.2.
Since this is a wli issue could you post in the wli newsgroup to get more answers http://forums.bea.com/forum.jspa?forumID=2047 ?
Also you can open a BEA support case at http://support.bea.com and an wli support engineer would help you. Please refer to the Cr numbers above in your support case.
Thanks
Vimala

LR3 Missing File Naming Issue

Hello,
I accidently deleted a number of images from two different collections. Luckily my partner had exported copies of all the keepers with the same file names.
LR3 never lost the catalog info, and the thumbnails were still present, albeit with the question marks for missing files.
In order to preserve at least the thumbnails of the non-keeper files, I simply used Windows explorer to copy the backups into the original location. (I realize I could have just deleted the old files and re-imported all of them via LR, but as I said I wanted to keep the ~10% of non-keepers as well.)
In one collection, the Locate Missing File process worked like a champ, and all the images have been reconnected in the LR catalog.
In the other collection, the Locate Missing File dialogue results in another dialogue that says the file name is not the same, even though, to my eyes, it is identical. I am not sure if it's an issue with .jpg vs .jpeg vs .JPEG or something else. When I do force the link, I get an additional dialogue that says the metadata has changes and it prompts me to overwrite it.
So my question is - Any idea why LR thinks the filenames are different when they are identical to the naked eye? Obviously I could do this one by one, but I have a few thousand images and was looking for a batch process to re-link them all. And I realize also that I could just re-import all the keepers, but I'm trying to preserve the non-keepers (they are indexing images and still have their uses, even in thumbnail form).
Any help would be appreciated.
Thanks,
Peter C

web-weaver,
Thanks for the response. I would say that it could be a factor because the files from my partner were obviously kept in a different folder. However, the move and Locate function worked fine on one set of images, but not the other. I'm guessing my partner ran the other images through some kind of processing that altered the filename in a way that is not apparent.
I'll keep trying to figure it out.
Thanks for the thought at least,
Peter

Two SAP systems in the same host "no files processing"

Hello!
I have two SAP Systems installed on the same host.
If I execute redo logs archiving from DB13 I get the error "no files processing", because of I already executed redo logs for the other SAP system on the same host.
<b>How can I set up this issue?</b>
Thank you very much
regards
Thank you very much
regards

Hello!
I have two SAP Systems installed on the same host.
If I execute redo logs archiving from DB13 I get the error "no files processing", because of I already executed redo logs for the other SAP system on the same host.
<b>How can I set up this issue?</b>
Thank you very much
regards
Thank you very much
regards

B1if File process

Hi All,
I am using SAP B1 9.1 Patch Level 3. In one of my scenario xml file pushing to SAP B1 Order. Scenario working fine until Error occured. In case in xml file item not available in B1 It's Show message in Failure. my next file also not process all item having in SAP B1. How i solve this issue?
and also success message also not showing in success list but file processed successfully

Hi Experts
SAP Version = 8.81 Pl08
I need your help , after i upgraded my B1if framework to higher version i get this error as shown below( we don't have any customization) all is standard SAP packages.
The Error: Server Side cannot respond your request (no scenario step (vBIU) associated for this step for the incoming system (SYSID)[0009].
what has gone wrong.
Thank you best Regards
Dayal

Error message by periodic weekly: No output from the 1 file processed

Hi there,
since four weeks, I got a problem with the maintenance script periodic weekly. Up to December 22nd, the script did, what it should do: rebuilding the database of locate and whatis, rotating log-files. Since one week later, I got the error message: No output from the 1 file processed.
Normally, I use Anacron to do the job. When I noticed the problem, I tried to start the script with Tinker Tool System getting the same result. Another try using the Terminal (sudo periodic weekly) also failed. The commands locate and whatis are working, locate.updatedb and makewhatis also. I'm running 10.4.8; in the past, I did not have such problems. Anyone with an idea or solution?
Thanks
Klaus
MacBook Pro Mac OS X (10.4.8)

Hi Gary,
here is the output you were asking for:
Last login: Thu Jan 25 20:03:55 on console
Welcome to Darwin!
DeepThought:~ dirk$ sudo /private/etc/periodic/weekly/500.weekly; echo $?
Password:
Sorry, try again.
Password:
Rebuilding locate database:
Rebuilding whatis database:
find: /usr/local/man: No such file or directory
makewhatis: /usr/share/man/man1/fetchmailconf.1.gz: No such file or directory
Rotating log files: ftp.log lpr.log mail.log netinfo.log ipfw.log ppp.log secure.log
access_log error_log
Running weekly.local:
Rotating psync log files:/etc/weekly.local: line 17: syntax error near unexpected token `)'
/etc/weekly.local: line 17: `if [ -f /var/run/syslog.pid ]; then kill -HUP 0 80 79 81 0cat /var/run/syslog.pid | head -1); fi'
2
DeepThought:~ dirk$ ls -loe /private/etc/periodic/weekly/500.weekly
-r-xr-xr-x 1 root wheel - 2532 Jan 13 2006 /private/etc/periodic/weekly/500.weekly
DeepThought:~ dirk$
It seems, Rogers idea, PsynX respectively the deficient uninstalling by me is responsible for my problems, is correct. Should I remove the whole file weekly.local or should I only remove the content? I prefer removing the whole file, because it was created while installing PsyncX. The date of creation is the same as the date of installing the app (December 25).
Klaus
By the way: it seems to me, the solution of my problem is in sight. So I want to thank you all for the amazing aid I got from you!

A DNG File Processed by an Earlier Version of ACR--How to Re-Process in ACR 8.4

I have thousands of DNG files processed by the ACR versions that came with CS4 and CS5. I was hoping to re-process some of them with the later ACR versions that came with CS6. But when I open a previously edited DNG file in ACR 8.4, it seems to revert to the earlier version in which the file was originally edited/processed. I made a duplicate of a file and reverted it to Default--sort of like restoring its virginity--but ACR 8.4 was not fooled; it still opened the earlier version. What to do???????

The earlier version of ACR was using a previous Process Version.
If you want the newer adjustment sliders, set your Process Version to 2012 on the Camera Calibration tab.

Sender File adapter and duplicate file processing

If I set the sender file adapter to delete or archive and when a file gets picked up and processed, this file will not get deleted/archived unless it was successfully processed. However, if it errors out during processing, the file remains but it's message will get persisted in the integration engine or adapter engine. Since there's automatic retry, we have the potential for duplicate processing as in addition to the retry, the file is still continously polling for this file. In other words, how do we stop this duplicate file processing?
Thanks.

Hi Bevan,
However, if it errors out during processing, the file remains but it's message will get persisted in the integration engine or adapter engine.
your file wont get deleted unless adapter engine sucesfull pickups. if does not picked up at adapter engine then is not stored in adapter engine . if it reached Intergation Server and failed their then file would be deleted.
please let me know if you haveany questions
please reward points
Regards
Sreeram.G.Reddy

FTP - Run OS Command before file processing

Hi,
I have a requirement wherein I need to FTP a file from XI to a folder in a FTP server . Now FTP Server is set up in such a way that I cannot put the file directly. Before transferring the file , I have to use CD ( change directory command ) to access a particular folder and then transfer the file. This means that I cannot give the folder information directly to TARGET DIRECTORY.
To address this, I decided to use the feature "Run OS Command BEFORE file processing " . And wrote a command 'cd <foldername> .It is not working. Then I tried using "Run OS Command AFTER file processing " and it also didnot work.
Does anyone have any clue how can I address this requirement using FILE Adapter.
thanks,
rakesh

HI,
OS commands will be executed in XI server not in the FTP server. So first you need to connect into FTP server and then you need execute CD command.
option 1) Get the absolute path ie direct path from FTP server so that you can directly connect to FTP server's specific directoty
22) In this case , write the file into your XI server itself by NFS File Transport protocol. Then ftp this file from your XI server into FTP server using Shell Script.
So write a shell script which will be executed in the XI server, inside this write a logic of tranfer of files with FTP protocol. This shell script is executed from the Reciever File adapter with the option OS command.
Hope this helps,
Regards,
Moorthy

Large file processing in XI 3.0

Hi,
We are trying to process a large file of ~280 MB file size and we are getting timeout errors. I followed all the required tunings for memory and heap sizes and still the problem exists. I want to know if installation of decentral adapter engine for just this file processing might solve the problem which I doubt.
Based on my personal experience there might be a limitation of file size processing in XI may upto 100 MB with minimul mapping and no BPM.
Any comments on this would be appreciated.
Thanks
Steve

Hi Debnilay,
We do have 64 bit architecture and still we have the file processing problem. Currently we are splitting the file into smaller chuncks and processsing. But we want to process as a whole file.
Thanks
Steve

File Splitting for Large File processing in XI using EOIO QoS.

Hi
I am currently working on a scenario to split a large file (700MB) using sender file adapter "Recordset Structure" property (eg; Row, 5000). As the files are split and mapped, they are, appended to a destination file. In an example scenario a file of 700MB comes in (say with 20000 records) the destination file should have 20000 records.
To ensure no records are missed during the process through XI, EOIO, QoS is used. A trigger record is appended to the incoming file (trigger record structure is the same as the main payload recordset) using UNIX shellscript before it is read by the Sender file adapter.
XPATH conditions are evaluated in the receiver determination to eighther append the record to the main destination file or create a trigger file with only the trigger record in it.
Problem that we are faced is that the "Recordset Structure" (eg; Row, 5000) splits in the chunks of 5000 and when the remaining records of the main payload are less than 5000 (say 1300) those remaining 1300 lines get grouped up with the trigger record and written to the trigger file instead of the actual destination file.
For the sake of this forum I have a listed a sample scenario xml file representing the inbound file with the last record wih duns = "9999" as the trigger record that will be used to mark the end of the file after splitting and appending.
<?xml version="1.0" encoding="utf-8"?>
<ns:File xmlns:ns="somenamespace">
<Data>
     <Row>
          <Duns>"001001924"</Duns>
          <Duns_Plus_4>""</Duns_Plus_4>
          <Cage_Code>"3NQN1"</Cage_Code>
          <Extract_Code>"A"</Extract_Code>
     </Row>
     <Row>
          <Duns>"001001925"</Duns>
          <Duns_Plus_4>""</Duns_Plus_4>
          <Cage_Code>"3NQN1"</Cage_Code>
          <Extract_Code>"A"</Extract_Code>
     </Row>
     <Row>
          <Duns>"001001926"</Duns>
          <Duns_Plus_4>""</Duns_Plus_4>
          <Cage_Code>"3NQN1"</Cage_Code>
          <Extract_Code>"A"</Extract_Code>
     </Row>
     <Row>
          <Duns>"001001927"</Duns>
          <Duns_Plus_4>""</Duns_Plus_4>
          <Cage_Code>"3NQN1"</Cage_Code>
          <Extract_Code>"A"</Extract_Code>
     </Row>
     <Row>
          <Duns>"001001928"</Duns>
          <Duns_Plus_4>""</Duns_Plus_4>
          <Cage_Code>"3NQN1"</Cage_Code>
          <Extract_Code>"A"</Extract_Code>
     </Row>
     <Row>
          <Duns>"001001929"</Duns>
          <Duns_Plus_4>""</Duns_Plus_4>
          <Cage_Code>"3NQN1"</Cage_Code>
          <Extract_Code>"A"</Extract_Code>
     </Row>
     <Row>
          <Duns>"9999"</Duns>
          <Duns_Plus_4>""</Duns_Plus_4>
          <Cage_Code>"3NQN1"</Cage_Code>
          <Extract_Code>"A"</Extract_Code>
     </Row>
</Data>
</ns:File>
In the sender file adapter I have for test purpose changed the "Recordset structure" set as "Row,5" for this sample xml inbound file above.
I have two XPATH expressions in the receiver determination to take the last record set with the Duns = "9999" and send it to the receiver (coominication channel) to create the trigger file.
In my test case the first 5 records get appended to the correct destination file. But the last two records (6th and 7th record get sent to the receiver channel that is only supposed to take the trigger record (last record with Duns = "9999").
Destination file: (This is were all the records with "Duns NE "9999") are supposed to get appended)
<?xml version="1.0" encoding="UTF-8"?>
<R3File>
     <R3Row>
          <Duns>"001001924"</Duns>
          <Duns_Plus_4>""</Duns_Plus_4>
          <Extract_Code>"A"</Extract_Code>
     </R3Row>
     <R3Row>
          <Duns>"001001925"</Duns>
          <Duns_Plus_4>""</Duns_Plus_4>
          <Extract_Code>"A"</Extract_Code>
     </R3Row>
     <R3Row>
          <Duns>"001001926"</Duns>
          <Duns_Plus_4>""</Duns_Plus_4>
          <Extract_Code>"A"</xtract_Code>
     </R3Row>
          <R3Row>
          <Duns>"001001927"</Duns>
          <Duns_Plus_4>""</Duns_Plus_4>
          <Extract_Code>"A"</Extract_Code>
     </R3Row>
          <R3Row>
          <Duns>"001001928"</Duns>
          <Duns_Plus_4>""</Duns_Plus_4>
          <Extract_Code>"A"</Extract_Code>
     </R3Row>
</R3File>
Trigger File:
<?xml version="1.0" encoding="UTF-8"?>
<R3File>
          <R3Row>
          <Duns>"001001929"</Duns>
          <Duns_Plus_4>""</Duns_Plus_4>
          <Ccr_Extract_Code>"A"</Ccr_Extract_Code>
     </R3Row>
          <R3Row>
          <Duns>"9999"</Duns>
          <Duns_Plus_4>""</Duns_Plus_4>
          <Ccr_Extract_Code>"A"</Ccr_Extract_Code>
     </R3Row>
</R3File>
I ve tested the XPATH condition in XML Spy and that works fine. My doubts are on the property "Recordset structure" set as "Row,5".
Any suggestions on this will be very helpful.
Thanks,
Mujtaba

Hi Debnilay,
We do have 64 bit architecture and still we have the file processing problem. Currently we are splitting the file into smaller chuncks and processsing. But we want to process as a whole file.
Thanks
Steve

File processing issue

Similar Messages

Maybe you are looking for