File structure error
My source code file structure is the same as my Tomcat structure:
/app/web-inf/classes/beans
1) In my JSP (stored at /app/entry.jsp), the only way I can access my bean is by specifying class="beans.ErrorBean", then putting my bean in the /beans folder and specifying 'package beans;' in my bean.
Why can't I have my bean in my 'classes' folder, no package declaration, and in my JSP use class="ErrorBean"?
2) Now, I have a class (/classes/Aclass.class - no 'package' declaration) that I need to access in my bean. But since the bean is in a package below, it cannot find Aclass. How do I get to it? If I move the bean up to the /classes folder, it sees Aclass, but then my JSP doesn't see the bean.
This structure all worked fine for another app where I didn't need to access a class in the /classes folder with one of my beans, but now it's an issue. If it matters, I'm using Sun ONE IDE.
The structure has worked on other applications for me, with only the beans in the classes/beans folder having a package declaration. This time, I can't even get all my code to compile.
Also, I thought when you have a package declaration, your classes should be in a folder with that package name. If your classes are in the /classes folder, I don't think Tomcat needs a 'package classes;' declaration. I haven't needed to use the 'package' declaration much, so I could be wrong.
Similar Messages
-
MacBook HD Failure - worry of carrying over file structure errors?
Hello all
Please excuse my intrusion .... I'm a composer and usually hang out on the Logic forum but have popped in to see if anyone has any experience with MacBook Internal Hard Drives?
I have a 2008 MacBook Duo 4,1 and have today had a hard drive go down for the second time this year. The Hardware test says ... ALERT ERROR 4HDD/11/40000004:SATA(0,0) I tried to bring it round with Disk Warrior but no joy.
My worry is that having once again installed a new hard drive and re-built everything from a Time Machine back-up, a clever Mac friend suggests that I may be carrying over a FILE STRUCTURE ERROR that exists on the TM back up which could cause the same issue over an over again?
If this is a possibility - is there anything I can do that negates my having to re-install everything again from scratch? (including copious authorisations and licenses for a huge amount of software from Quicktime AVID codecs for use with locking movies to my DAW and Music Sample Libraries!)
Does anyone have any experience of File Structure Errors being carried over from HD back ups?
Many thanks in anticipation of help.
Best
DickHey Dick,
just to get down and technical, since it feels like you did not understand all the facts (no offense, please, I will try to explain).
When a hard drive fails mechanically or physically, and, let's say, makes the computer crash, there is a pretty good possibility that files that were open at the time of the crash were not saved properly, and thus are broken. It's just a consequence from the failure and the crash, if it happened. It's not DUE to the failure itself.
So, if you have a TM backup, which, as was stated before, is just files copied to some other drive somewhere on the network, there is no way you could reintroduce some physical damage, that was on your internal drive, back to a new one. If you HAD a utility that would do a 1:1 copy of a drive, there would be the possibility that defective blocks would be copied, but not with TimeMachine.
Let's be theoretical.
Let's say your hard drive failed in stages. Let's say you were working on a project. And let's assume you had a bunch of files open, when the drive initially failed. The system crashed, and some of those files were damaged. Let's further assume that you rebooted the system, and did a backup. And let's finally assume that you THEN changed the drive and restored the backup to the new drive.
Now, in THIS particular case, that would mean that there is a possibility that you backed up one or more damaged files to the TM (since a damaged file is still that: A file) and then restored it.
Now let's finally assume that THEN, after the restore, was the first time you tried to open those particular files after the first crash. You would then see that they are broken.
To sum this up: That's the only scenario I can imagine how to get something damaged "back from the grave". Apart from that, it may just be bad luck that your drive failed for the second time, and I am pretty certain that you don't have a defective backup.
I hope I made some things clear. Please let us know if you have any further questions, and don't be afraid if they might sound dumb to you. There's no such thing as a dumb question. Just dumb answers
i. -
Memory Management, Crit Structure Corrupt, Bad Pool Caller, ntfs file system error
So after freshly installing Win 8.1 I was happy, untill I started to play some games that I previously played on Win 7, I've started to get a whole heap of errors, I did have more written down but have lost the bit of paper they were written on.
Here are the list of errors I can remember.
Memory Management, Crit Structure Corrupt, Bad Pool Caller, ntfs file system error
Specs:
Operating System
Windows 8.1 Pro 64-bit
CPU
AMD Athlon II X2 250
35 °C
Regor 45nm Technology
RAM
6.00GB Dual-Channel DDR2 @ 400MHz (5-5-5-18)
Motherboard
ASUSTeK Computer INC. M3N-H/HDMI (Socket AM2 )
40 °C
Graphics
SyncMaster (1440x900@60Hz)
SAMSUNG (1440x900@60Hz)
ATI Radeon HD 4800 Series (Microsoft Corporation - WDDM v1.1) (Sapphire/PCPartner)
Storage
698GB Western Digital WDC WD7500AAKS-00RBA0 ATA Device (SATA)Adam
These are Related to
atikmdag.sys ATI Radeon Kernel Mode Driver. Yours is 2+ years old. I would update to the newest driver available.
Microsoft (R) Windows Debugger Version 6.3.9600.16384 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Ken\Desktop\A040614-65203-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred SRV*H:\symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*H:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 8 Kernel Version 9600 MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 9600.16384.amd64fre.winblue_rtm.130821-1623
Machine Name:
Kernel base = 0xfffff803`be013000 PsLoadedModuleList = 0xfffff803`be2da9b0
Debug session time: Mon Apr 7 00:35:03.785 2014 (UTC - 4:00)
System Uptime: 0 days 0:08:48.334
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck 3B, {c0000005, fffff80001cf7d73, ffffd0002305c470, 0}
*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
Probably caused by : atikmdag.sys ( atikmdag+70d73 )
Followup: MachineOwner
0: kd> !analyze -v
* Bugcheck Analysis *
SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff80001cf7d73, Address of the instruction which caused the bugcheck
Arg3: ffffd0002305c470, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.
Debugging Details:
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
FAULTING_IP:
atikmdag+70d73
fffff800`01cf7d73 8a040a mov al,byte ptr [rdx+rcx]
CONTEXT: ffffd0002305c470 -- (.cxr 0xffffd0002305c470;r)
rax=0000000000000000 rbx=ffffcf80021783a0 rcx=ffffcf8002334ff5
rdx=0000307ffdccb010 rsi=ffffcf8004734470 rdi=ffffcf80021783a0
rip=fffff80001cf7d73 rsp=ffffd0002305cea8 rbp=ffffd0002305cf00
r8=0000000000000006 r9=0000000000000000 r10=0000000000000384
r11=ffffcf8002334ff0 r12=0000000000000001 r13=ffffcf8004734470
r14=0000000000000000 r15=ffffcf8004734470
iopl=0 nv up ei ng nz na po nc
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010286
atikmdag+0x70d73:
fffff800`01cf7d73 8a040a mov al,byte ptr [rdx+rcx] ds:002b:00000000`00000005=??
Last set context:
rax=0000000000000000 rbx=ffffcf80021783a0 rcx=ffffcf8002334ff5
rdx=0000307ffdccb010 rsi=ffffcf8004734470 rdi=ffffcf80021783a0
rip=fffff80001cf7d73 rsp=ffffd0002305cea8 rbp=ffffd0002305cf00
r8=0000000000000006 r9=0000000000000000 r10=0000000000000384
r11=ffffcf8002334ff0 r12=0000000000000001 r13=ffffcf8004734470
r14=0000000000000000 r15=ffffcf8004734470
iopl=0 nv up ei ng nz na po nc
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010286
atikmdag+0x70d73:
fffff800`01cf7d73 8a040a mov al,byte ptr [rdx+rcx] ds:002b:00000000`00000005=??
Resetting default scope
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VERIFIER_ENABLED_VISTA_MINIDUMP
BUGCHECK_STR: 0x3B
PROCESS_NAME: csrss.exe
CURRENT_IRQL: 0
ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre
LAST_CONTROL_TRANSFER: from fffff800025cf3d7 to fffff80001cf7d73
STACK_TEXT:
ffffd000`2305cea8 fffff800`025cf3d7 : ffffcf80`04734470 ffffcf80`04734470 00000000`00000000 ffffcf80`01f52450 : atikmdag+0x70d73
ffffd000`2305ceb0 ffffcf80`04734470 : ffffcf80`04734470 00000000`00000000 ffffcf80`01f52450 ffffd000`2305cf00 : atikmdag+0x9483d7
ffffd000`2305ceb8 ffffcf80`04734470 : 00000000`00000000 ffffcf80`01f52450 ffffd000`2305cf00 fffff800`025f48d3 : 0xffffcf80`04734470
ffffd000`2305cec0 00000000`00000000 : ffffcf80`01f52450 ffffd000`2305cf00 fffff800`025f48d3 ffffcf80`04734470 : 0xffffcf80`04734470
FOLLOWUP_IP:
atikmdag+70d73
fffff800`01cf7d73 8a040a mov al,byte ptr [rdx+rcx]
SYMBOL_STACK_INDEX: 0
SYMBOL_NAME: atikmdag+70d73
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: atikmdag
IMAGE_NAME: atikmdag.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 4fdf9bbd
STACK_COMMAND: .cxr 0xffffd0002305c470 ; kb
FAILURE_BUCKET_ID: 0x3B_VRF_atikmdag+70d73
BUCKET_ID: 0x3B_VRF_atikmdag+70d73
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:0x3b_vrf_atikmdag+70d73
FAILURE_ID_HASH: {1ec4cdaf-008d-03dd-4ca9-ade1993441da}
Followup: MachineOwner
Wanikiya and Dyami--Team Zigzag -
Imported par file to NWDS, jar file missing. Where find par file structure?
Hi All,
We want to implement idle session timeout on the portal. We found a wiki here on the subject. In order to implement the solution we need to make adjuestments to com.sap.portal.navigation.masthead.par.bak. When we import this par file to Netweaver Developer Studio, the libraries and jar files are missing. So obviously it errors then in portal as files are missing.
So I could add them manually but I don't know what the file structure is on this par file so don't where to add what. Does anyone know?
Also when I export the file after manually adding the missing files, will it export all the files or will it behave the same way as the import and leave out the additional files?
If anyone could help, I'd really appreciate it,
Kind regards,
Liz.Hi Bala,
I thought of that just before you responded and it worked!! Thanks for the response..
Regards,
Liz. -
Invalid File Name Errors when syncing to Ipod
Ever since an update last fall I have been getting Invalid file name errors when I try to sync my ipod. A window would pop up saying "Windows could not copy 'SONGNAME' to the iPod 'IPODNAME' because an unkown error occurred (-37)." I would press OK and another window would immediately pop up that would say, "Attempting to copy to the disk 'IPODNAME' failed. the file name is invalid or too long."
The windows would keep popping up countless times until the sync would just seem to time out and stop.
The problem songs would have no problem playing in iTunes.
Prior to the update this did not happen. No new songs were added around this time and nothing was changed to my file directory structure. I was too busy to troubleshoot this problem at the time and hoped that another update would fix it. Well, here I am many months and updates later and still no fix. After fiddling with iTunes and resetting my Ipod multiple times (goodbye saved angry bird games)I have found out that:
1. By writing down the file name when the error windows pop up I can get a partial list of the problem file names. I could not get a complete list of the problem files because the sync would time out before a full list could be compiled (the list appears to be in the hundreds).
2. If I changed the name of the file by adding OR deleting one character, remapping the song in itunes, the song would then sync properly.
3. If I changed the name of the file, remapped the location of the file within iTunes, changed the name of the file BACK to the original name that iTunes supposedly had a problem with, and then remapped the location of the song within iTunes, the song would then sync properly
4. If I moved the song to a different directory without changing the file name, remapped the song within iTunes, the song would sync properly.
5. If I moved the song to a different directory without changing the file name, remapped the song within iTunes, moved the file BACK to the original directory, remapped the song again, the song would sync properly.
6. If I renamed the file and then named it back to the original file name WITHOUT remapping the file location in iTunes, the song would still not sync properly
7. If I moved the file into a different directory and then back again without remapping the file location, the song would still not sync properly.
8. Changing or deleting the tags has no effect at all.
9. File name lengths are already under 200 characters and there are no special characters used.
So, to sum up, I have found out a way to fix the issue. The problem is, that there are hundreds of songs that appear to be affected and renaming or moving every single one individually and then remapping is extremely inefficient and ignores the cause of the problem. I also did not want to delete the itunes library and then add all of the songs back in because I have many custom playlists that I have spent hours creating and I do not want to delete them.
Is there a better way to fix the problem? Especially if someone knows the root cause?I got a procmon log file and examined it. I have the file and I could also provide you with that or screenshots of it.
There is nothing unusual about it. I can see entires in which CR has successfully opened the report and has cached in a c:\windows\temp.
However there is one or two non-successful entries that may be related, especially that examining the stack trace brings us to a call to get_ProductLocaleID():
- A call to read reg entry HKU\S-1-5-20\Software\Business Objects\Suite 12.0\Crystal Reports\Locale fails with NAME NOT FOUND.
- immediately after that and from the same process (w3wp.ex) there is a call to open directory "c:\" which is logged as ACCESS DENIED.
Any subsequent unsuccessful calls seem to be results of exception handling in the debug code.
Does this point to any setup issues with CR? We always run the redistributable x86 runtime when installing it. -
File Structure with iTunes on an External Drive
This is an image of the file structure on my external drive that holds all of my iTunes music:
Is this correct, or should I have set it up differently? I am asking since it is differnet the the iTunes file structure on my MacBook Pro and some files will get uploaded to my external drive and others will go onto my MBP,s iTunes Music folder. All of my iPhone/iPad apps, Album Artwork, Mobile Applications. I have Book folders on both drives and the both have books on them.
I should say that I had a major problem a few years ago, which has nothing to do with the above problem, with one of the iTunes updates which disconnected most of my songs from their respective files. I tried a solution a friend sugested, which really messed up the files and now many of the files have different info inside the song files, i.e., Otis Redding as the Artist on a Radiohead track. Or another groups cover for a Beatles album. I have a large library and have gone through slowly and fixed many things, but it is still quite messy and a huge bummer.. As a proud new owner of a Late 2011 MacBook Pro, I would love to be able to have a solution for this as well.
TIAWell I just went through the same thing. I had a Lacie Porsche mobile drive at 80GB and changed to a Lacie Rugged 250. I keep all my music on external never local. Not a fan of loading my laptop. Anyways.... I was getting those same errors. I had copied all the itunes library contents from the Porsche drive to the Rugged drive. It took quite some time to transfer so you knew it was working. Then changed in the preferences of iTunes to save in the Rugged drive. If you trashed or deleted any files from the new drive and just put them in the trash without emptying you get that 501 trashes path. I found I had multiple duplicates of songs with the name of the song followed by a 1.mp4a. I think the library.xml file is the key to a clean transfer of music. I think this file is stored locally in your user folder and then it's used to direct to the alternate drive but from what I've read it's the file with all the playlist information and stuff on it. If you find it and move it over to the mobile drive then hold option and boot up itunes then tell it to look for that file on the new mobile I think you'll have no worries. I'm actually gonna try this myself.
You don't want to know how it got it working. I physically opened every music file on the rugged drive to make sure the were all where they were supposed to be. All 70'gb's of music. Never doing that again. -
Corrupted file structure in iPhoto library?
This is a little like the "disappeared library" problem that someone else reported, but my library looks OK. It's just that several years worth of photos have disappeared (i.e. folders show as empty).
A quick check into the library folder suggests that originals and modifieds are still there. There seems to be a "disconnect" in linking the library structure to the contents.
As with the other guy, I wouldn't want to restore everything one roll at a time and rebuild my folders.
I have daily backups (using Backup). 10 days ago everything was fine; but if I do a Restore from 15 days ago, I get a successful restore msg, but nothing has changed. Maybe there are bugs in Backup too. You put some faith in Backup working, but I've had Restoring problems with Backup of Mail files as well in the past.
I'm no expert at this sort of thing, but it might be helpful to just know what the iPhoto file structure is supposed to look like. Then maybeI could try to restore specific items on a trial-and-error basis.Thanks for the prompt reply, TD...
You've come close to describing my situation, but I don't see the solution.
In my case I have the following in my iPhoto folder (quite similar to your list...
In my case I have folders labelled 2001 through 2007 in my Originals folder, and the same for Modified, although oddly enough there's no 2002. It's possible that I didn't make mods for that full year, but doubtful.
If this is the case you have nothing to worry about.
In earlier versions of iPhoto the folder structure
was based in Date. With v6 a new structure was
created:
Originals are the photos as they were
downloaded from your camera or scanner.
(ii) Modified contains edited pics, shots that
you have cropped, rotated or changed in any way.
This allows the Photos -> Revert to Original command
- very useful if you don't like the changes you've
made.
(iii) Data holds the thumbnails the the app
needs to show you the photos in the iPhoto Window.
OK, you've explained that well, but here is the real problem. If I can call that thing on the left of my screen a Table of Contents, I have folders labelled by year, Last 6 rolls, Last 18 months and dozens that I have created myself... plus some slide shows. That whole structure seems intact from the way I left it before things went wrong.
The issue is that it's the most recent years.. 2006, 2007 have (0) beside them and don't show any photos when clicked on. The same is true of all of the folders (albums) I've created with pictures from those years.
I can see from a file listing of 2006/2007 that I have 3GB of photos in Originals and another 1 GB on Modified. Sampling the photos in Preview shows that they're OK as far as I can tell. What I'm calling the Table of Contents simply isn't accessing them.
Hopefully you have a simpler solution for me, but what would happen if I did an import on the 2006 and 2007 files? I suppose the 100 or so albums I've created would all have to be created???
And, I still don't understand why my Backup Restore isn't recreating what I had working fine just 10 days ago. -
Hi gurus,
I am trying to send IORDER01(pm order) from an R/3 system to a file, which works fine.
but when i try to use some business logic like if order type = 'PM01' then only i have to write to the file, using ccBPM, it fails...
this is my first BPM scenario and am having trouble....have read lot of blogs etc...can u please tell me where i am going wrong...
I have a data type DT_FILE for writing to the file.
I have interfaces:
si_oa_iorder(outbound asynchronous interface for file)
si_aa_iorder(abstract asynchronous interface for idoc)
si_aa_file( abstract asynchronous interface for file)
si_ia_file (inbound asynchronous interface for file)
I have message mapping MM_IORDER2FILE mapping IDoc to flat file structure
I have operation mapping OM_IORDER2FILE where I have mapped si_aa_iorder and si_aa_file
(( Is this right? are both abstract interfaces to be mapped? or do i need to create more mappings like si_oa_iorder to si_aa_iorder etc? please clarify...))
My IP is very simple with just a 'recv step' having container element of type si_aa_iorder and 'send step' having container element of type si_aa_file to start with..i haven't yet put the switch control etc...even such simple IP fails....
I have created Configuration objects like
Business System for file receiver
Business component for Idoc sender with adapter specific details set
Communication channels for Idoc and file adapters
No sender agreement as it is Idoc communication
Receiver agreement between the Integration Process(IP_IORDER2FILE) and the file server
2 Receiver determinations between BC_idoc_send to IP and other from IP to FileRecv system
2 interface determinations , one from si_oa_iorder of BC_idoc_send to IP and other from si_aa_file of IP to file recv system.
This is my setup and this fails....
My question is..is my message mapping and operation mappings correct? and can u see any obvious blunders i am doing?
please bear in mind that with same interfaces and sending and recv components, it runs fine without BPM....so please look at the BPM bit of mappings/config that i might have missed and please advice asap..
Thanks in advance and i am sure there would be lot of gurus for whome it is just a peanut...so please reply...
Regards
JhansiHello,
I am trying to implement one pi scenario :
File -> file adapter -> ccBPM -> soap receiver adapter -> web service request -> web service response -> ccBPM -> output file adapter.
The web service that I call works file from wsnavigator. I have created all the design and configuration objects
needed for the scenario.
I place a file with following contents:
<?xml version="1.0" encoding="utf-8"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<SOAP-ENV:Body>
<pns:GetSetNameWS xmlns:pns="urn:file2soap2fileWSVi">
<pns:name1>ajeet</pns:name1>
<pns:name2>phadnis</pns:name2>
</pns:GetSetNameWS>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
When I look at the process monitor I get this:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Receiver Determination
-->
- <SAP:Error SOAP:mustUnderstand="" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="RCVR_DETERMINATION">CX_RD_PLSRV</SAP:Code>
<SAP:P1>Problem while determining receivers using interface mapping: No operation with XML root tag http://schemas.xmlsoap.org/soap/envelope/.Envelope exists.</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Error when determining the receiver: Problem while determining receivers using interface mapping: No operation with XML root tag http://schemas.xmlsoap.org/soap/envelope/.Envelope exists. Problem while determining receivers using interface mapping: No operation with XML root tag http://schemas.xmlsoap.org/soap/envelope/.Envelope exists. No operation with XML root tag http://schemas.xmlsoap.org/soap/envelope/.Envelope exists.</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I have no clue about this error. Can you help me with this ?
If yes I can send you more details, if you liked
Hoping to get help from you,
Cheers,
Ajeet Phadnis -
Import Manager Usage : Approaches for developing Import file structure and text validations
Hi Experts,
We are having 50+ import maps. We have provided option to users to drop the files for data import. Currently Import Manager(7.1 Sp08) does not have capability of pre-import validation of file data such as
a. file structure - number of columns specific to import map
b. file text validations - special characters, empty lines, empty cells
c. Uniqueness of the records in the file
For this, we are planning to build temporary folder(port specific) in which user drops in the file. We use the custom development to do above mentioned validations and then move the files to actual import ports.
Please let us know if you have worked on similar requirements and how you have fulfilled such requirements.
Regards,
GangaHi Ganga,
Assuming you have a well defined xsd and are getting valid xmls from source in the Inbound Port of MDM. Also,you have a Primary key in form of External ID (say).
So just by making and defining a XSD you get most of what you want in your questions a and b.
Now if you wish to use PI to drop files in the inbound port then you can build all the validations in PI itself and you would not need Staging table.
Otherwise,you can have another table (preferably Main table) in the same repository or other dummy repository where records are created on import based on External ID.
Here you can launch an MDM workflow on import of these records and run assignments to replace unwanted characters and Validations to give error for rejecting some records based on the data quality level desired.Once unwanted characters are removed and data is validated it can be syndicated using a syndication step in the Workflow.So records which fail are not sent and which pass are sent to a outbound port.
From the outbound port PI or some other job can pick the file from this outbound folder and drop to Inbound folder of the same repository which imports to the required Primary Main table.Here again you have the option to leverage validations in PI and further check if data is fine.
Once this activity is done you can delete the records from the staging table.
Thanks,
Ravi -
Finder File Structure of iMovie 08
Is there any documentation on the Finder file structure that iMovie 08 uses for Events and Projects?
While trying to move files to an external hard drive because the start-up disk was getting full, my father messed up his iMovie 08 files. I recombined all of them back into one Movie Events folder and one Movie Projects folder (both within one Movies folder), but when viewed in iMovie 08, some events are out of date order, plus a few other issues.Joe Seidler wrote:
Is there any documentation on the Finder file structure that iMovie 08 uses for Events and Projects? ..
Apple is a lil' shy in publishing details ..
probably, as a registered Apple Developer, in the Developer boards and papers you'll find some.
transferring Events and Projects OUTSIDE iM08 is never a good idea.. there're some internal links, which get broken..
probably, my advice here..
http://karsten.schluter.googlepages.com/im08changeeventdate
and
*Project Library (and Events) on External Harddrive*
http://karsten.schluter.googlepages.com/im08tricks
can give you some advice.. hints.
but, me no programmer nor engineer.. advice is based on trial and error, not know-how -
Volume structure error -694???
Ran tech tool cd and it could not fix volume structure error and showed error -694. Does anyone know what this means?
Just archived and reinstalled OSX yesterday to fix a boot up problem, which it did. But now after doing the needed updates - whenever I try to type something in firefox a gray screen with the power button logo pops up and says I have to restart - and when I try to open multiple documents into photoshop it won't open them - only individually.
So I figured something must be wrong - and ran the apple hardware test, disk utility and then the tech tool deluxe. Then I got the volume structure error which tech tool could not fix. Could it have something to do with permissions errors? I was trying to fix permissions and everytime I do, I get the same corrections which seems weird. Anyone got any suggestions?
I have an imac G5 with OSX version 10.3.9. 1.8 Ghz with 768MB Memory.
Here's the permissions errors I am having :
: for architecture i386 object: ./Applications/iTunes.app/Contents/MacOS/iTunes malformed object (unknown flavor for flavor number 0 in LC_UNIXTHREAD command 27 can't byte swap it)
: for architecture i386 object: ./Applications/iTunes.app/Contents/Resources/iTunesHelper.app/Contents/MacOS/iT unesHelper malformed object (unknown flavor for flavor number 0 in LC_UNIXTHREAD command 13 can't byte swap it)
We are using special permissions for the file or directory ./Library/ColorSync/Profiles/Displays. New permissions are 16893
We are using special permissions for the file or directory ./Library/ColorSync/Profiles. New permissions are 16893
We are using special permissions for the file or directory ./System/Library/Filesystems/cd9660.fs/cd9660.util. New permissions are 33261
We are using a special uid for the file or directory ./private/var/at/jobs. New uid is 1
We are using a special uid for the file or directory ./private/var/at/spool. New uid is 1
The privileges have been verified or repaired on the selected volume
Verify/repair finished permissions on disk disk0s3 Macintosh HD
Any help would be great. I can still use my computer - but I want to get this fixed before bigger things happen...The error -694 message means that one part of your hard disk is listed as being part of two or more files; using the Disk Utility's Repair Disk option may identify these files.
The output of the Repair Permissions command indicates that you're using a version of iTunes which the mechanism can't properly handle, and the others are status messages. You shouldn't be concerned about any of those messages.
(12347) -
Recurring "Invalid Node Structure error"
Hello all,
Starting a new thread with this one....
Have done 5 complete re-partitions, clean SL installs and back ups from TM in the last four days. DU disk checks out fine after re-install, DU comes up clean.
After a few hours, the hanging beach ball returns, I run DU and get the "Invalid Node Structure" error message.
This in on the iMac that is 42 days out of Apple care......
Ran techTool after the last install, and it comes up clean....
What's the soultion? Nuke the drive and get a new on on my dime?
I've repartitioned, zeroed out the data and sit here with a naked drive, I really don't want to spend another day loading it up if it's shot....
The TM files and drive I'm backing up from check out fine.
Thanks,
MarkTook 3+ hours. Came up clean. I have not restored from TM yet. Did the SL updates ect.
Repaired permissions, ran DU it comes up clean.
I will do some net surfing tonight (that's all I did this morning) still without loading the back up data, and we'll see if I get the beachball of death.
I will run another surface scan when I hit the hay, and see what it says in the morning.
If that is clean, I will restore the back up data, and run the surface scan again.
One step at a time until I can recreate (or not) the failure mode.
Tedious, but I have to get to the bottom of this. I don't want to load any of the TM back up on to the Mac Air until I'm sure it's not a software issue.
Mark -
Hi All,
I need some information on how I might solve a problem. I ran my Disk Utility earlier today to verify the HD on my MacBook Pro because my computer just seemed a bit off. It froze the other night when I shut it down.
Here is the message I received:
Verifying volume "Macintosh HD"
Checking HFS Plus volume
Checking Extents Overflow file
Checking Catalog file
Invalid node structure
The volume Macintosh HD needs to be repaired
ERROR: The underlying task reported failure on exit
1HFS volume checked
Volume needs repair
I booted the computer from the original OS X Install Disc and tried to repair the hard drive, which didn't work. That's when I started reading the Tiger Forum. I have since discovered that this error cannot be repaired from the Install Disc and probably will require an erase and re-install. However, I did read about a 'fsck' command.
I would like to give this a try, but am not at all comfortable with running commands. Would someone be willing to walk me through this and/or offer any other suggestion for fixing this?
ThanksMichelle,
Sounds like you are really learning a lot in a hurry. That's good. I can't tell you how long it will be before your system "acts up." I would take this opportunity to backup any really important data to DVD/CDs while you are in the process of getting an external drive and Disk Warrior.
Good question about whether your file system error will be copied to you external drive when you clone with SuperDuper or Carbon Copy Cloner. I don't know exactly but it will certainly be better to have a backup that may be slightly imperfect than to have no backup at all. Of course, after you fix the error on your internal drive with Disk Warrior, then you will reclone your repaired system to your external.
Regards,
Steve M. -
What is the best way to manage file structure in an Edge Animate project
I started an Edge Animate project, but halfway through I realized that one of the folders I created was misspelled. In Windows Explorer, I renamed the folder, but that caused the Edge Animate project keep crashing. Is there a way to manage/edit the file structure of a project within Edge Animate? If not, is it possible to make alterations to the project's file structure in Windows Explorer without causing errors in Edge Animate?
Thanks,
PaulDoes anyone have any comments or know of any possible solutions for this?
-
Invalid node structure error when verifying hard disk, please help
My 27" Mid 2011 iMac is having hard disk issues. I attempted to repair the disk but received an error that said the disk cannot be repaired and needs to be re-formatted. I have all my files backed up to an external hard drive so I erased and formatted the disk. After reformatting, I ran the verify disk function and got the message saying the HD appears to working properly. I reload OSX Lion and within a day, my computer freezes up and acts as if something is wrong. When I run the verify disk, I get the Invalid Node Structure error multiple times and then the message saying the disk cannot be repaired and I need to reformat the drive. I have completed this process several times and have had no luck. I have looked at a few forums with people who have had somewhat similar problems but am still unsure. I have seen people recommend programs like Disk Warrior to repair issues the hard disk utility cannot but I don't want to spend $100 dollars on this program if my hard disk is damaged and needs to be replaced. Any suggestions? Thank you
Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.
Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional — ask if you need guidance.
Maybe you are looking for
-
Syncing multiple iPhones to iTunes
My Mac has 2 accounts, one for Parents and the other for Kids. That way, all our photos, music, documents and bookmarks are common and at the same place. I also have a MobileMe account into which I got an alternate email account for my wife, back whe
-
How to import multiple DNG files into Premiere
I want to import multiple raw DNG files from a 2.5K blackmagic camera. Each clip is recorded in a separate folder: I can import each clip separately by selecting its folder and clicking on a DNG file, but -for obvious practical reasons- I would like
-
User interface corrupted on new iMac 24
Hi, Does anyone else experienced graphic corruptions on 10.5 with a brand new iMac 24? By corruption I mean dock bottom becoming black, black rectangles in icons, images scrambled, etc... Thanks.
-
I have problem installing my snow leopard
I have problem installing my snow leopard. it says that installing will continue after restart of my computer. But after it has restared, no installation happened. also it keeps ejecting the cd. What am i going to do? I've tried so many times.
-
HT1657 Can I watch a rented movie without Internet access?
I hv rented a movie for a trip but then realized, am I able to watch it without I telnet access?