File to BAPI scenario

Hi guys,
I have the following scenario:
A file is picked up that has multiple rows and for each row that contains a material, I have to call a BAPI, which it was not possible to wrap inside an Idoc.
Initially, I had increased the cardinality of the BAPI in message mapping from 1 to 1..unbounded, in order to be able to call it for each record of the file. Since the messages tag was added in XML document, the RFC receiver adapter was not able to execute it.
I have now set up file sender adapter to create one XI message per file record/line (in order to avoid the messages tag in the target XML from the mapping) and the problem that we face is that the BAPI is not always executed. Actually the BAPI is creating and changing materials' classification and is called BAPI_OBJCL_CHANGE.
I have set up correctly the RFC receiver adapter, and I do not have checked the "Commit single BAPI Calls" checkbox.
In log of RFC adapter in RWB, I can see only the successful RFC calls. And if for example I have 5 lines in the file, i.e. 5 materials, then only 3-4 will be created successfully. And in RWB I will get "Success" for correct ones and not for the failed ones.
Any ideas?
Evaggelos

Hi Evaggelos,
In the message you can remove the messages tag and send the message. Check out my reply in a similar thread:           <<<1:2 Message Mapping WithOut BPM - Split mapping created no messages Error>>> That way the input message can be read by the BAPI and it wont throw error.
Regards,
Sanjeev.

Similar Messages

  • File to BAPI error

    hi,
    iam getting following error in file to bapi scenario.plz help me
    2007-11-02 17:21:20     Success     RFC adapter received a synchronous message. Attempting to send sRFC for BAPI_SALESORDER_CREATEFROMDAT1
    2007-11-02 17:21:21     Error     Exception caught by adapter framework: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: failed to parse BAPI response due to: com.sap.aii.af.rfc.util.bapi.BapiException: Parameter RETURN has type "BAPIRETURN1" which is unknown.
    2007-11-02 17:21:21     Error     The message status set to NDLV.
    2007-11-02 17:21:21     Error     Delivery of the message to the application using connection AFW failed, due to: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: failed to parse BAPI response due to: com.sap.aii.af.rfc.util.bapi.BapiException: Parameter RETURN has type "BAPIRETURN1" which is unknown..
    T & G
    viju

    hi vijendra
    check this forum discussion
    Treating BAPI return in RFC Receiver Adapter
    regards
    Ramesh P

  • Problem in storing data in BAPI in File to RFC Scenario

    Hi everyone,
    I m doing File to RFC Scenario.......I completed design and configuration part and actived the Communication Channels.....
    Now when I check in Runtime workbench I am getting succefully executed both at outbound and Inbound Channels.......but
    data is not updated in BAPI...........
    I m getting following error when I check in Component monitoring......
    Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: RfcAdapter: receiver channel has static errors: configuration exception caused by: com.sap.aii.af.rfc.core.config.RfcChannelInactiveException: channel has status inactive: com.sap.aii.af.rfc.afcommunication.RfcAFWException: RfcAdapter: receiver channel has static errors: configuration exception caused by: com.sap.aii.af.rfc.core.config.RfcChannelInactiveException: channel has status inactive
    Please help me out.......
    Regards,
    Sudheer.

    Hi
    "I took Business Service as Service but not Business System.....Will it effect the scenario???......"
    I suggest While dealing with the SAP Systems we should use Business systems.
    Pls check the foolowing Threads for the above Query
    RFC - Business Service
    Re: business service for file to rfc
    Regards
    Abhijit

  • Xi file to rfc scenario

    hi,
    I have to pass an excel file from  server pass , all the contents and name(both are changing everyday) as a string to a filed of wrapper ZRFC(bapi ),based on return code of zrfc (return code for error )it will shoot mail to concerned person

    If the RFC call is used to insert data in some database, then you will have to use BPM, with async-sync bridge. File - RFCreq - RFC Resp - Mail.
    If just a lookup from RFC is required, then you may avoid BPM by creating file to mail scenario with RFC lookup.
    Regards,
    Prateek

  • File to BAPI with out BPM

    can we do File---> BAPI with out BPM

    Which version of XI you are using??
    XI 3.0 or PI 7.0?? and SP for it?
    Reffer this File to RFC Scenario without BPM
    FOr solution reffer this : File - RFC - File without a BPM - Possible from SP 19.
    Thanks
    Farooq.

  • XI 3 File to IDoc scenario - Still referencing Old Logical system

    Hi
    Dont know if you can help. I have a file to idoc scenario  using XI 3 to R/3 4.6c system.
    I had the interface working from a third party system XMLHUB to SAP R/3. The Logical system name for the XMLHUB was XMLHUB01 in the SLD which I have set up as a partner profile in R/3. I have recently changed the logical system name to XMLHUBDEV01 in the SLD and created that logical system in R/3 and changed the partner profile to XMLHUBDEV01.
    Unfortunately in the sender information of the IDoc the partner number is still XMLHUB01 and not XMLHUBDEV01. I don't understand where this partner is sent from to get into the control record of the IDoc.
    I have cleared the SLD cache in both the Repository and the directory. Is there somewhere else I should be looking? Any help would be appreciated.
    Regards
    Daniel

    hi daniel...
    this thread wud answer ur query....
    Re: IDOC Payload
    regards..
    vishal

  • Step by Step Guide Details for RFC to File and File to RFC scenario

    Hi Guru's
    Good day to you. I am tyring to develop some scenarios based on RFC adaptor. so i want to start up with basic scenarios like RFC to File  scenario(Here i just want to pull some data from SAP using RFC and put it in destination folder as an text file) and FILE to RFC scenario (Here i just want to take some data from the file and update into SAP).
    For doing these scenarios i would like to request you people to send me the step by step guide which explains me about the complete steps of configurations required to do the RFC to FILE scenario and FILE to RFC scenario.
    I found some scenarios and i am in confused state. so i request you to please put your experience to help me out.
    thanks in advance.
    Regards
    Raj

    Hi Aaron,
    I don't know your scenario and your ECC and PI versions but I learned how to use ABAP Proxy more than 1 year ago with the following tutorial:
    Edit--> The forum doesn't allow me to post external link, just search "ABAP Proxy Communication Scenario" in google and visit the 1st result
    The way to develop ABAP Proxys has changed a little if your PI is 7.1. In the ECC side, the transaction SPROXY looks much better too if you have a recent version of the ECC.
    Edited by: Marshal on Oct 8, 2009 5:08 PM
    I've found that SDN Document. Maybe the scenario is not the most simple to start with ABAP Proxy but is very well documented and is for PI 7.1. The document also handles the inbound and outbound proxys
    [http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c00ca32e-f991-2b10-f5be-97114bd2b08f&overridelayout=true]
    Edited by: Marshal on Oct 8, 2009 5:22 PM

  • Message has error status at outbound side File To Idoc Scenario

    hi ,
    In my File to Idoc scenario , when i go to sxmb_moni , i found that its showing red flag at Outbound Status Tab and showing message "Message has error status at outbound side".
    When i go to IDX5 and and select my idoc and click on Transaction Id it shows "Password logon no longer possible - too many faile" .
    Please suggest what may be the problem ?
    Regards,
    Rohit

    1. First check the RFC destination name used in receiver Idoc adapter communication channel.
    2. As i said earlier, in sm59 transaction in XI gui, u can check same rfc destination under type 3. There check the logon credentials and the username.
    3. Now goto the R3 system GUI and check in su01 that same user is locked or not. If locked unlock it.
    4. And if u change the password of that user, then do the similar change in XI -> sm59 -> rfc destination logon credential
    Regards,
    Prateek

  • Error in File to IDOC Scenario

    Hi,
    I have File to IDOC scenario.
    I am getting error in sender file channel.
    "Conversion initialization failed: java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Mandatory parameter 'xml.keyfieldName': no value found "
    Although I have used this parameter in content conversion 'xml.keyfieldName' (for each sub structure and defined a key field).
    Despite of this error in sender channel I am receiving the message in XI.
    But in XI also it throws error :
    "Unable to convert the sender service PG_TOM_CEEMEA_RU_SFA to an ALE logical system"
    Any help on this ?
    Thanks,
    Vikas

    Hello Vikas,
    I am getting error in sender file channel.
    "Conversion initialization failed: java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Mandatory parameter 'xml.keyfieldName': no value found "
    Although I have used this parameter in content conversion 'xml.keyfieldName' (for each sub structure and defined a key field).
    Check your flat file structure whether the key field you have chosen is appropriate and also recheck the FCC details whether you have assigned the value for the key field i.e.  keyFieldValue.
    "Unable to convert the sender service PG_TOM_CEEMEA_RU_SFA to an ALE logical system"
    regarding the above error refer this
    https://wiki.sdn.sap.com/wiki/display/XI/Unable%20to%20convert%20Sender%20system%20to%20ALE%20logical%20system
    Regards,
    Prasanna

  • Error while doing a File to IDOC scenario

    Hi Experts,
    I have created a File to IDOC scenario where in i have sent a file which has to pass data to ABSEN1 IDOC.I could see the IDOC reaching R/3 ,but with the status 56: "EDI: Partner profile inbound not available"
    I have checked with all the configurations and couldnt find where it went wrong.
    Kindly help me in this regard.
    Thanks.

    Hi
    Check the inbound parameter and the process code.
    To find Process code for IDoc use Tcode WE42.
    ALE idoc trouble shooting use
    Troubleshooting of ALE Process
    look also this configuration
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6bd6f69a-0701-0010-a88b-adbb6ee89b34

  • Error while calling RFC adapter(FILE-XI-RFC scenario)

    Hi,
    I am trying for FILE-XI-RFC scenario. I am getting the following error. I have checked in message monitoring. The error is coming while calling the RFC adapter. Can any body tell what problem is this?
    Regards,
    Dhana
      <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Adapter
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
      <SAP:P1>af.f23.sofd00001530a</SAP:P1>
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText>2: Unable to find URL for Adapter Engine af.u7a.us4296</SAP:AdditionalText>
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Error while reading access data (URL, user, password) for the Adapter Engine af.f23.sofd00001530a</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>

    Hi,
    I did SLD check.
    The status says 'Summary: Connection to SLD works correctly'.
    But it fails while checking the access to XI profile.
    Here is the status
    Summary: Connection to SLD works correctly
    Now checking access to the XI Profile
    Properties of RFC destination LCRSAPRFC
      RFC host:
    %%RFCSERVER%%
      program id:      LCRSAPRFC_DZ1
      gateway host:
      gateway service:
    Testing the RFC connection to the SLD java client...
    RFC ping returned exception with message:
    / CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679#Transaction program not registere

  • Reading XML file using BAPI and then uploading that xml file data into SAP

    I am getting a xml file from Java server. I need to take
    data from this file using BAPI and need to upload into SAP using SAP.
    Please tell me how to read XML files using BAPI's.

    <b>SDIXML_DATA_TO_DOM</b> Convert SAP data (elementary/structured/table types) into DOM (XML
    <b>SDIXML_DOM_TO_XML</b>  Convert DOM (XML) into string of bytes that can be downloaded to PC or application server
    <b>SDIXML_DOM_TO_SCREEN</b> Display DOM (XML)
    <b>SDIXML_DOM_TO_DATA</b>
    data: it_table like t001 occurs 0.
    data: l_dom      TYPE REF TO IF_IXML_ELEMENT,
          m_document TYPE REF TO IF_IXML_DOCUMENT,
          g_ixml     TYPE REF TO IF_IXML,
          w_string   TYPE XSTRING,
          w_size     TYPE I,
          w_result   TYPE I,
          w_line     TYPE STRING,
          it_xml     TYPE DCXMLLINES,
          s_xml      like line of it_xml,
          w_rc       like sy-subrc.
    start-of-selection.
      select * from t001 into table it_table.
    end-of-selection.
    initialize iXML-Framework          ****
      write: / 'initialiazing iXML:'.
      class cl_ixml definition load.
      g_ixml = cl_ixml=>create( ).
      check not g_ixml is initial.
      write: 'ok'.
    create DOM from SAP data           ****
      write: / 'creating iXML doc:'.
      m_document = g_ixml->create_document( ).
      check not m_document is initial.
      write: 'ok'.
      write: / 'converting DATA TO DOM 1:'.
      CALL FUNCTION 'SDIXML_DATA_TO_DOM'
        EXPORTING
          NAME               = 'IT_TABLE'
          DATAOBJECT         = it_table[]
        IMPORTING
          DATA_AS_DOM        = l_dom
        CHANGING
          DOCUMENT           = m_document
        EXCEPTIONS
          ILLEGAL_NAME       = 1
          OTHERS             = 2.
      if sy-subrc = 0.  write  'ok'.
      else.             write: 'Err =', sy-subrc.
      endif.
      check not l_dom is initial.
      write: / 'appending DOM to iXML doc:'.
      w_rc = m_document->append_child( new_child = l_dom ).
      if w_rc is initial.  write  'ok'.
      else.                write: 'Err =', w_rc.
      endif.
    visualize iXML (DOM)               ****
      write: / 'displaying DOM:'.
      CALL FUNCTION 'SDIXML_DOM_TO_SCREEN'
        EXPORTING
          DOCUMENT          = m_document
        EXCEPTIONS
          NO_DOCUMENT       = 1
          OTHERS            = 2.
      if sy-subrc = 0.  write  'ok'.
      else.             write: 'Err =', sy-subrc.
      endif.
    convert DOM to XML doc (table)     ****
      write: / 'converting DOM TO XML:'.
      CALL FUNCTION 'SDIXML_DOM_TO_XML'
        EXPORTING
          DOCUMENT            = m_document
        PRETTY_PRINT        = ' '
        IMPORTING
          XML_AS_STRING       = w_string
          SIZE                = w_size
        TABLES
          XML_AS_TABLE        = it_xml
        EXCEPTIONS
          NO_DOCUMENT         = 1
          OTHERS              = 2.
      if sy-subrc = 0.   write  'ok'.
      else.              write: 'Err =', sy-subrc.
      endif.
      write: / 'XML as string of size:', w_size, / w_string.
      describe table it_xml lines w_result.
      write: / 'XML as table of', w_result, 'lines:'..
      loop at it_xml into s_xml.
        write s_xml.
      endloop.
      write: / 'end of processing'.
    end of code
    Hope this will be useful.
    regards
    vinod

  • Reading XML file using BAPI  I must use adapters .

    Reading XML file using BAPI and then uploading that xml file data into SAP using BDC.
    I cant take file on to my Application server I am getting the file dynamically from other file server and I need to use BAPis to read data from XML file.please tell me what should be my Import,Export and Tables parameterrs should be.
    Thanks

    Hi,
    Import, export and table parameters for BAPI is required, without that BAPI will not able to collect the data from XML. What you need to do is write a Zprogram and collect the data, store that data in internal table and call the BAPI by passing required parameters.
    Different Scanarios:
    1) Before calling a BAPI write some other program which collects the data from XML and create a UNIX file. Try to get the data from UNIX FILE
    2) If you see the XML tags, data will be in side that tags, try to get the data from XML tags and store that data in one SAP table. You can use the BAPI by fetching the data from table
    3)Create a table and store the data in the table. Use the table in SAP to extract the data.
    BAPI won't work without any parameters, you have to pass some parameters then the BAPI will return some values.
    Hope i am clear.
    Thanks&Regards,
    -Suresh Revuru

  • How to handle the control records in case of file to idoc scenario.

    Hi All,
    can you please clarify me how to handle the control records in case of file to idoc scenario.

    Hi,
    In File to Idoc scenario even though you selected apply control record values from payload and you are not getting those correct values which you have provided in the mapping.
    Also check the checkboxes Take sender from payload and Take receiver from payload along with the Apply control record values from payload checkbox
    Regards
    Seshagiri

  • File to RFC scenario with no BPM

    I want to create File to RFC scenario with no BPM. I want to invoke RFC synchronously to verify that I'm getting correct response back, but i dont wanna process the response. So, In SXMB_MONI i can check the response back from RFC right? Or do I need to have BPM if want to see the response back from RFC?
    What kind of business system i need to create for RFC? can i use same business system for both File and RFC? I'm using one Business System created on Third party technical system, which i'm using for file Input, also for RFC. Is that OK?
    Thanks,
    Deepesh

    Hi,
    I need to have BPM if want to see the response back from RFC? ... yes
    The BPM will help you find the response very comfortable.
    What kind of business system i need to create for RFC? can i use same business system for both File and RFC? I'm using one Business System created on Third party technical system, which i'm using for file Input, also for RFC. Is that OK? ..Yes you can .
    Regards
    Agasthuri Doss

Maybe you are looking for