File to (IDOc and File)

Hi,
I have to design a File to IDoc Sceanrio in PI. From the file, i llpick up the vendor(during mapping) thorough RFC look up. If the more than one vendor comes for the particular condition then I should throw an error log(in the form of file) and no idoc should get posted. If one comes, then idoc should get posted. they do not need BPM.Is there any way to do without BPM?
Points will be awarded for sure.
Regards
Manikandan

No there isn't another way.

Similar Messages

PI 7.1 scenario -- File to File , File to IDOC and IDoc to File Scenario

Hi All,
*I have PI 7.0 . I have in that File to File , File to IDOC and IDoc to File Scenarios*
File to File -- This scenario is working fine.
File to IDOC -- Setting done in PI 7.0 like SM59, IDXI, IDX2 and in R/3 like SALE (logical system)--- This scenario is working fine.
IDoc to File -- Seeting done in R/3 like SALE (Logical system, Distrubtion Model (Port, Partner Profile)) -- This scenario is working fine.
Now I need to move to PI 7.1 -- for File to File , File to IDOC and IDoc to File Scenarios.
Please let me know do I require to make any changes in Design and Configuration and settings in PI 7.1 and R/3 for above scenarios or it will work fine as it is already working for PI 7.0
If changes are required please let me know what changes to do for each scaenario and pls also send blogs for that.
Regards

>
Rickkk wrote:
> Hi,
>
> Idoc metadeta is updated through idx2?
>
> Regards
If there is no metadata maintained for an idoc type, the metadata for that idoc type gets loaded when an idoc of that type is received by PI for the first time. If you are looking at loading metadata of all idoc types before the first run, its really not required. Just make sure that the port is configured properly. Although, there is no harm in preloading the metadata using IDX2.
You need to use IDX2 mandatorily when the the metadata changes and the metadata in ECC and PI is different. In that case, you need to delete metadata for the changed IDoc type and then either you can update the metada through IDX2 or let the system take care of.

Pass through scenario in SAP PI with no mapping for File to IDoc and Idoc to file scenarios

Hi Experts,
Can i have step by step process in SAP PI for pass through scenario with no mapping in case of file to Idoc and Idoc to file both cases please.
What objects i can skip.
My PI system is 7.3 dual stack.
I have seen below blogs, still its confusing to me.
When and how to create an scenario in SAP PI without mapping objects.
Pass Through Scenario with no Mapping in PI 7.1
Appreciate your help on this.
Regards,
Mohan.

Hi Mohan
In pass thru interface you don't need to create any ESR objects, only ID objects are required.
Just Create a Receiver Determination and Receiver Agreement for your scenario (no need for Interface Det. and Sender Agreement).
Specify the IDOC in the Sender Interface and namespace as urn:sap-com:document:sap:idoc:messages
Or instead of creating objects manually, Run the wizard with Idoc name/namespace in sender/receiver interface
Regards
Osman

IDOC --BPM--IDOC AND FILE

Hi Experts,
My scenario is idoc to idoc and file through BPM.
so I hve one integration process and 2 receiver.The prob is frm IP it is pointing to only file not to IDOC
1) 1 sender agreement
2) 3 receiver determination
3) 3 interface determination
please help me out..

Why are you using BPM for this?it is not good design.
If you want to still use bpm then
1)1 receive step,
2)2 transformations steps(if or are executing Operation mapping in IP).
3)2 send steps.
check your BPM design and monitor Integration process work flow.
Regards,
Raj

Need Information for transporting a file as IDOC through File Port!!!

Hi,
All configurations are present in the system to transfer a file as IDOC using File Port.
Now we are creating a custom program to transfer the same. Now i have all the data in an internal table which has to be send to Non SAP system. So can i know the process how to send the same.
I have a SAP Directory where i need to place the system. I also have all ports required.
So please let me know how to code the same ASAP.
Thanks and Regards,
sagar..

You may want to try using the IDOC Test tool WE19 in order to test out your ports and partner profiles.
Also sending from SAP to XI / PI you might be better configuring RFC Destination / SM59.
See this Wiki for more info...
http://wiki.sdn.sap.com/wiki/display/XI/ALE+Configuration

FileChooser - "switch off" file name field and file type drop down choice..

Hi there,
I'm wondering, is there a simple way of not displaying the file name field and file type drop down choice that anyone knows of?
Reason being; my FileChooser is embedded in an application window and does not pop up as a dialog - the users are only acessing one file type, but it could be in any folder on their machine.
many thanks,
Fergus.

Moved to legacy SDK forum

File to idoc and no mapping?

Hi
We are using PI 7.0
IDOCFileSender->PI7.0->ALERECEIVER
we have a file in the "native" file format for an idoc, we now would like to process this file through PI and sending it to our SAP systems ALE layer. We are not allowed to call the ALE adapter directly in our SAP system from the system generating the native idoc format - it must be done only through PI !
My question is if it is possible using the fileadapter to read this file and with pass it throug PI to IDOC receiver adapter without any mapping? In that case what should the Message Type we are using in the file-sender adapter look like?
Hope for some help.
Thx

Hi,
>is possible using the fileadapter to read this file and with pass it throug PI to IDOC receiver adapter without any mapping?
yes
>In that case what should the Message Type we are using in the file-sender adapter look like?
If you have no mapping it doesnt matter, the message type will not be validated during runtime. You can take the IDoc type imported from the SAP system
Regards,
Udo

File to Idoc and Jdbc

Hi Guys,
Can I implement a scenario wherein the data is sent to Idoc and JDBC parallelly without using BPM?
Regards,
Ashish

Ashish,
>If i add multiple recievers in receiver determination step without any condition, then how do i add multiple interface determinations in the area below?
Once you add multiple Receivers and save the same, the Receivers will be available in the Window Below and you would need to create an Interface Determination for each of these Receivers.
As you do not have any condition, no need to add conditions.
>created seperate Receiver determinations
You would need only ONE RECEIVER DETERMINATION and this receiver determination would in turn have multiple Interface Determinations.
Like mentioned, add multiple receivers save the Receiver Determination and in the window below, you will nopw be able to add an Interface determination for each of the receiver.
Regards,
Bhavesh

File to Idoc OR File to AbapProxy

Hello,
Let me expose my problem.
In fact, I need to integrate new Goods Movements sent by a non-Sap system to ECC system.
To do that, the non-sap system sends a file.
Then, I need to generate from this file an Idoc (MBGMCR), fill this Idoc with some extra data (from Ecc tables) and then to integrate it into ECC.
The question here is to find the best solution (according to performance and feasibility) to do that using PI (7.0).
We are hesitating between two scenarios:
1- File to Abap Proxy
We get the data sent by an abap proxy, and then we complete it with the necessary extra data from ECC tables in order to create complete the Idoc segments.
In this case, I canu2019t see the need of SAP PI because we could have just basically read the file directly with ECC.
Even, using PI will be a waste of performance/time (due to mappingu2026)
2- File to IDOC
This alternative looks more interesting (at least in the PI way).
But this scenario may lead to the following problem: there are a lot of fields not filled by the data coming from the non-sap system (even whole segments).
For example, the file contains Orders headers and I need to generate Goods Movements for the materials contained in the orders. So I need to access Orders posts, to retrieve the materials data.
Is there a way to retrieve simple information in PI using ECC data?
Any other suggestion/comment is welcome.
(Any other scenario is also welcome)
Thanks you in advance.
Saber L.
SAP PI consultant.
Edited by: LMS LMS on Nov 7, 2008 10:24 AM
Edited by: LMS LMS on Nov 7, 2008 10:25 AM
Edited by: LMS LMS on Nov 7, 2008 10:25 AM

ABAP proxy would improve performance in terms of providing adapterless communication.
In this case, I canu2019t see the need of SAP PI because we could have just basically read the file directly with ECC.
Making a direct connection would increase point to point connectivity across the organization whose reduction is one of the reason why XI is used.
If ur communication is async and u have the idoc structure ready, then u may proceed with Idocs.
But this scenario may lead to the following problem: there are a lot of fields not filled by the data coming from the non-sap system (even whole segments).
If you want to prevent the node from getting generated, simply disable it in mapping.
I hope u have seen this
Choose the Right Adapter to integrate with SAP systems
Regards,
Prateek

How to eliminate empty tags in out put XML file in IDOC to File scenario

Hi Experts,
I am doing IDOC to File scenario.
My Out put XML is in to FTP is as below
<ITEMS>
 <item>
 <A>asdf<A>
 GHIJ
 </item>
 <item>
 <A>123<A>
 G098
 </item>
</ITEMS>
<ITEMS/> -
> Means no data
<ITEMS/> -
> Means no data
<ITEMS>
 <item>
 <A>yyy<A>
 zzz
 </item>
 <item>
 <A>arrr<A>
 Ghhh
 </item>
</ITEMS>
Now I want to eliminate tages <ITEMS/> in out out put XML file ( PIwhich writes in File server).
1) Is there any setting in communication channel to do this
2) Is there any settings in Mapping proram to suppress parent tag if child tags are not available.
I want output as below .
<ITEMS>
 <item>
 <A>asdf<A>
 GHIJ
 </item>
 <item>
 <A>123<A>
 G098
 </item>
</ITEMS>
<ITEMS>
 <item>
 <A>yyy<A>
 zzz
 </item>
 <item>
 <A>arrr<A>
 Ghhh
 </item>
</ITEMS>
Thanks,
Subbu

items->mapwithdefalut(just empty in the value)-> euqals(check with empty constant)->not->createif->target node
and make sure that as Ravi kanth said ...occurance is min is 0 at target side
Regards,
Prasad.
Edited by: PRASAD KONDA on May 21, 2009 1:50 PM

Complete file not displayed in File server(Idoc - XI File scenerio)

Hi,
Am working on Idoc-XI-File scenerio.
The target file is getting generated properly and complete xml n Adapter Monitoring in RWB.
But in the file server(in the directory)only part of the xml is displayed.The size of the file is 82KB.
Is there any configuration need to see the complete file in File Server.

Hi Amit,
This could be due to Network. How far is the file server from XI server?
I suggest putting the file in to local machine or in the same network and check whether it is OK.
- Pinkle

Cannot send file to XI ,and File Adapter Error in RWB- Adapter Monitor

i develop the file to file scenario, and everything in Integration Builder is right, and the configuration is no problem
but it cannot send file to XI, so the whole process
cannot start. The file adapter seems not work
how can i solve the problem?
Thank you for your reply

Hi Leo,
I Guess you should first see if the file is being picked... for that do the following.
While configuring your Sender File Adapter, let the mode be DELETE. This way, we will know if the file is being picked by the File adapter. The file will be deleted and you can be sure that it has been picked up.
In your runtime workbench home, there will be a tab, Component Monitoring, click on it. Select status as all, and click on display. The components will be displayed on ur screen. In that, under Integration Server, there will be a link for Adapter Engine. Click on it. Now, scroll down, and u will see a link to adapter monitoring, there under FILE ADAPTER see the log of the file adapter
and also, you can see the flow of your message in the integration engine in SXMB_MONI.
Do this and let us know what is happening...
Meanwhile i would also suggest you to go through the explanation of a simmilar scenario that i have explained below and compare it with what you have done..
Please go thru the following links and clear all your doubts.
Communication channel:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/65/b11c409ce22402e10000000a1550b0/frameset.htm">Assigning Communication Channels</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/2b/d5653fd1d3b81ae10000000a114084/content.htm">Communication Channel</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/content.htm">Configuring the Sender File/FTP Adapter</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm">Configuring the Receiver File/FTP Adapter</a>
Receiver agreement:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/56/02e63f48e58f15e10000000a155106/frameset.htm">Receiver Agreement</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/c1/5194426b44c56ae10000000a155106/frameset.htm">Creating a Receiver Agreement</a>
Sender agreement:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/db/73e03fc2269615e10000000a155106/frameset.htm">Sender Agreement</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/22/522041cfb7f423e10000000a155106/frameset.htm">Creating a Sender Agreement</a>
For detailed info, I would suggest that you go through these weblogs:
<a href="/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1">Introduction to simple(File-XI-File)scenario for Starters</a>
<a href="/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2">Introduction to simple (File-XI-File)scenario for starters part2</a>
I hope it helps.
Regards,
Abhy

Save as swf file using httpconnection and file io

I have one application which is fatch the swf file from web and i want to save as in same to swf file format.
when i have fatch the swf file and save as .swf format i have unable to view as flash animation in browser and micromedia.
Anyone suggest me ?
URL url = new URL("http://nileshpatel.com/abc.swf");
HttpURLConnection con = (HttpURLConnection) url.openConnection();
con.setRequestProperty( "User-Agent", "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.0)" );
BufferedReader rd;
rd = new BufferedReader(new InputStreamReader(con.getInputStream()));
String line="";
String content="";
File f = new File("users/nileshpatel/neo.swf");
FileWriter fw = new FileWriter(f);
while ((line = rd.readLine()) != null) {
content += line;
rd.close();
fw.write(content);
fw.close();
############################################################

BTW sometimes flash uses communication with server to obtain some information before/during running. In such case you'll need to provide kind of your own HTTP server, pass swf to browser using HTTP protocol (not directly from HDD) then pass all additional data.
Hope this is not your case :)

Where to get the image file of directory and file icon??

I've wrote a "file chooser" by my self and
I need different icons to denote directories and
files. Does anyone know where to get this icons??
thanks

use print screen and paste it in paint shop
cut what you need

Converting WMV files to QuickTime and file size

I have QT Pro and I have no problem doing a "save as..." for converting WMV files to .mov. I also have Flip4Mac converting the file to be viewed in QT first.
My question is that if I do a straight-ahead "save as..." it'll make the file's size about 25% larger. If I try to do "export" with default settings it takes far longer and I have an even larger file. I've also tried playing with different compression in QT to save these files and haven't come up with anything that works better. Is there a way to manage the file size so it's the same or smaller, not bigger?
Thanks in advance all!

File size is dicated by the bitrate of the file. From my review of (thousands) of WMV files there appears to be some compression in the WMV format that is not reapplied when save as to a MOV container is performed. You can see in get info the WMV file say 100MB has maybe 125-150MB of data when it is fully loaded in Quicktime.
Thus save as does not apply the WMV compression the same as native WMV is all I can assume and the new QT file (MOV container) is bigger than the source file is.
Exporting to any new QT format (say H264) is going to make a file that is dependent on the new QT bitrate you select but if it is higher than the bitrate shown in the Get Info Inspector box when the original WMV has been opened it will be bigger without a doubt. So if you have a 3Mb/sec WMV file that you export to 700 kb/sec for iPod basic it should be 1/4 of the size. Use 5Mb/sec fo Apple TV it should be 2/3 larger.
I rarely use QT Pro to export and when I do I don't use default settings. I prefer MPEG Streamclip which offers easier control of variables, batch file processing, deinterlacing and other things and it is free.

File to (IDOc and File)

Similar Messages

Maybe you are looking for