Files failing to render completely. HELP!

Hi, we have rendered around 50+ wedding movies in the last ranging 1-3 hours long videos, but since yesterday, when Im rendering its failing.
Not sure, whats wrong.
Here is an example.
We finished our Premiere Pro Work and exported it to media encoder h264, mp4 file.
Its 12GB file.
Media encoder showed me 12 hours rendering time, and it started.
It reached 92% after 9 hours and immediately stopped.
When I checked the folder, the final rendered file was missing and I saw this 3 files.
http://d.pr/i/yzwB
I guess, since the render did not finish successfully, those are unfinished files.
When I checked the logs, I could see this,
<code> - Source File: Sequence 01
- Output File: C:\Users\Joomla\Documents\Adobe\Premiere Pro\6.0\piyush\piyush_final_3dec.mp4
- Preset Used: YouTube HD 1080p 23.976
- Video: 1920x1080 (1.0), 23.976 fps, Progressive
- Audio: AAC, 320 kbps, 48 kHz, Stereo
- Bitrate: VBR, 2 pass, Target 8.00 Mbps, Max 8.00 Mbps
- Encoding Time: 13:35:46
12/04/2013 06:02:21 AM : File Encoded with warning
File importer detected an inconsistency in the file structure of piyush_final_3dec.mp4. Reading and writing this file's metadata (XMP) has been disabled.
Adobe Media Encoder
Could not write XMP data in output file.
------------------------------------------------------------</code>
So, what does that mean ?
How do I fix this ?
Please let me know asap, as I need to finish and deliver 2 videos before tomorrow evening.

What are the specs of your system? Particularly the OS version and your RAM. A similar bug way back in 2008--same error message, also involving a sizeable sequence--ended up being a Windows problem, which was resolved by Microsoft in October 2008.
That bug was reproducible only with a particular clip, and we were able to isolate a single frame where the decoder choked. If one of your clips likewise has a glitch, you could try to isolate it by exporting the sequence in chunks (via In/Out Points). Given that encoding had reached 92%, I'd start with the last quarter of the sequence. When you isolate a segment that fails, then keep dividing it in two until you narrow it down pretty tightly. At a certain point, you'll want to limit the test exports to individual clips.

Similar Messages

ERROR: validate with data file failed

Hi,
We are using SAP BPC 7.5 NW SP08(Admin & client). We are trying to load transaction data from BW actual cube to BPC application for which we have written the following transformation file.
*MAPPING
CATEGORY=*NEWCOL(ACTUAL)
P_ACCT2=MVAL(0RECTOTSTCK|NEWCOL(PRODQU))
P_DATASRC=*NEWCOL(INPUT)
MATERIALBW=0MATERIAL
RPTCURRENCY=0LOC_CURRY
TIME=0CALMONTH
SIGNEDDATA=0RECTOTSTCK
*CONVERSION
TIME=Conversion for IM Actuals.XLS!CONVERSION
We want to map BW keyfigure 0RECTOTSTK (production quantity) to PRODQU - a member of the dimension P_ACCT2. And also we want to load the data from that key figure into our SIGNEDDATA field in BPC.
We have validated and processed the conversion file without error, but getting the following error while validating definition of the transformation file:
"ERROR: validate with data file failed"
Can you please help on this.
Thanks in advance.
Appu

Issue was resolved.We were trying to load data from the cube 0IC_C03.However, that cube had some non-cumulative key figures. BPC 7.5 SP08 does not allow data to be loaded from BW cubes having non-cumulative key-figures to BPC Cubes.This is a bug which will be rectified in SP11 according to SAP.
Since we needed only 0RECTOTSTCK which is a cumulative key figure we created a separate BW cube and loaded it from 0IC_C03 using only the necessary cumulative key figures and other dimensions.We then used the new cube to load data into BPC cube and it worked.

HT1751 Consolidating ITunes Library Failed - message received: "Copying files failed. The file name was invalid or too long" . Please help - how to i fix this issue?

I consulted your website for details on how to back up my ITunes Library on my PC-found the article very helpful-I reached step 7 - clicked ok and the following message came up: "Copying files failed. The file name was invalid or too long." Please can you help and advise what I should do or how to fix this issue. My pc operating system is Windows 7 Home Basic

You can select a group of tracks and consolidate from the right-click context menu. You coud try consolidating in batches, say all songs by artists beginning with A, then B, etc, then the other media types, until you can isolate a problem track and then try moving that by hand and fixing the broken link.
I also have two scripts that could help you, Unconsolidated and ConsolidateByMoving. The first can make a playlist of all unconsolidated tracks, the second can consolidate a selection of tracks by moving them instead of copying.
tt2

Newbie help please: "Validation of XML file failed."

Hopefully my question is short and easy.
I'm a developer and haven't used FrameMaker before. However for unforeseen reasons, I've inherited our technical help documentation constructed in FrameMaker which I've never used. Unfortunately I'm under a very tight deadline and I'm attempting to update our already existing and fairly extensive application help files.
However, I'm getting a "Validation of XML file failed" error for 90% of our .xml help docs. I opened our .book file in FrameMaker fairly easily, and can see all of our .xml files. However the variables already embedded in the documents aren't being recognized and seem to be causing the above error. I've located our variable definition files (xml) in the concepts folder, but FrameMaker doesn't seem to recognize them. Any suggestions on what I can check or how I can get FM to refer to the variable definitions? I'm working with a new installation of FM, is there some setup I overlooked?
Many thanks,
dana.

Sheila and Rick,
Thank you both so much for your offer of help. My apologies for not replying earlier. Other 'emergencies' and priorities at work took me in other directions. It turns out another solution has been found for the time being. But thank you again for your replies. They say a lot about this community and its support. :)
Thanks again,
dana.

Is it OKAY to delte render files once a project completed?

I am feeling the FCP 6th sense that I should NOT delete my render files even once I've completed a project. If I want to revisit that project and I've deleted my render files from the render files folder on my hard drive, what happens? They are taking up a lot of space (167GB!) and it's slowing down my system.
thanks for any advice!
jenna

Sure, you can delete the render files. The worst thing that will happen is that if you later want to go back and work on that project, you will need to re-render everything. Personally, I tend to archive my rendered files as well as my captured files off of my main system. That way, if I do need to go back to a project, getting ready to work doesn't take nearly as long.

HT1766 I have an I pad Mini. Since i down loaded the new update ISO 7, my I Pad is not running certain media files either from Chrome or Safari browser. I called technical support but they failed to provide any help stating the media files may not be comp

I have an I pad Mini. Since i down loaded the new update ISO 7, my I Pad is not running certain media files either from Chrome or Safari browser. I called technical support but they failed to provide any help stating the media files may not be compctable with new soft ware. I do bnot agree with their finding because i have I phone with ISO 7 updated soft ware and same files run on my I phone but not on I Pad. This was working fine before updating new software. This device is useless for me if i can not watch the program that i bought this for. I want device to replaced or taken back by the company. Thank you

Here are the iPad Mini specifications:
iPad mini - Technical SpecificationsNov 1, 2012
The specifications explain exactly what types of files are supported under "TV and Video".

Photoshop CS6 updated Raw and now get message saying "Could no complete your request the file was not found." Help

I updated CS6 Camera Raw as it would not read my D7100 raw files. Since that I cannot open jpegs.
Also, I go to Photoshop - About Plug-In - Camera Raw and get a pop up window saying "Could not complete the Camera Raw command because the file was not found."

I apologize, guess I wasn't very good in giving info. It is on a Mac running Snow Leopard. I did the CS6 updates through Help/Updates but that did not update to where my camera (Nikon D7100) raw files could be read. I searched around on Adobe's site for the Camera Raw update that took care of reading them, forget what page I finally found a download link on but the update was a singular installer for Camera Raw. Once updated Photoshop CS6 stopped being able to 'find files' even when the file is dragged onto the Photoshop icon, or through the menu's Open. I have since uninstalled everything reinstalled the suite from the original installer. I know have a Photoshop that will open jpegs but just not my camera's raw files. Thanks for any help that you think might take care of the problem. I am not going to update the Camera Raw unless I can find out what happened and what to do to prevent it. I switched my camera to take jpegs until if and when I solve the mystery. :-) Thanks!

Pse12 sometimes fails to close completely leaving exe file running in background

pse12 sometimes fails to close completely leaving exe file running in background which must be closed with Task Manager before reopening in Windows 8.1.

Try to use "Firefox/File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit") to close Firefox if you are currently doing that by clicking the close X on the title bar.
See "Hang at exit":
*http://kb.mozillazine.org/Firefox_hangs
See "Firefox hangs when you quit it":
*https://support.mozilla.org/kb/Firefox+hangs

HT1449 Help! This all runs quite smoothly until i get to 'consolidate library'. Then, tracks start copying, then stop followed by a pop up saying 'Copying files failed. The disc could not be read from or written to.' Any suggestions? Thank you!

Help! This all runs quite smoothly until I get to 'consolidate library'. Then, tracks start copying, then stop followed by a pop up saying 'Copying files failed. The disc could not be read from or written to.' Any suggestions? Thank you!

I had similar problems, it was a nightmare and on a 3 month ipod too!. I use a Powerbook G4 at home and a G5 at work - both were returning the same problems. so I sent it off to apple, they quickly sent it back saying there was nothing wrong with and it didn't need to be repaired. I tried it again and the same problems occurred "disc cannot be written to or read from." I could copy 20 songs onto it at the very most. A couple of guys at my work suggested updating it on a PC, then adding tunes via my mac as normal - guess what!? it works a treat!?. How ridiculous is that!? an Apple product works best on a PC. these generations of ipods are obviously designed to work best on Intel based Macs. What is wrong Apple? are you abandoning the G-generation!? still, atleast my ipod works for now - it will prove a problem when I have to update the iPod's software since I don't own a PC or an intel-based Mac.

Where can I download the complete help file?

I just need complete help file.
because I have had a version2.0 for Japanese.
who can tell me how to get complete help file.

I am trying to download the JDK 1.3 from the url
www.java.sun.com. the actual file is 31.7MB but after
downloading upto 20.7MB the the process is getting
discontinued. The same is the case if I try to
download JDK 1.4.2_06( actual size is 51.5MB but am
able to get only 22MB. Can any body suggest the
reason for this problem and also a solution for this.
I would like to have a link where in I can download
the complete JDK exe file. Please help out.
thanks.rfug

Updating Adobe Community Help files fails every time after starting

Hello,
I e.g. go to «Support Center for Photoshop» from the menu within the app. Adobe Community Help starts up and tells me theres new content, do I want to download that. It seems to start the dl just fine, then reports an error «16882» (if I'm remembering it right).
Why? We have very fast very broadband internet connection and I use a 2011 27" iMac with max Gig RAM installed.
Any hints there would be appreciated.
Thanks!

Thanks, Mister Kapoor,
that solved my problem!
All the best to you, sincerely,
Olaf Mueller
Mit freundlichen Grüssen,
Olaf Müller
COMPLOT AG Multimedia Project, Gerberngasse 44, Postfach, 3000 Bern 13
Tel. ++41 31.313 30 33
Fax ++41 31.313 30 39
[email protected]
http://www.complot.ch
THE ULTIMATE PARTNERS
- RITTER KREATIV
Unternehmensberatung+Kommunikation,
integrales Marketing, Werbung, Promotion, PR
- Complot AG Multimedia Project
Interactive Solutions, Internet, Intranet, E-Business, CD-ROM, DVD, Hosting
- FOTarena
Studio-Pool für Foto, Video, Bildbearbeitung
Am 24.04.2012 um 12:30 schrieb Arpit Kapoor:
Re: Updating Adobe Community Help files fails every time after starting
created by Arpit Kapoor in Downloading, Installing, Setting Up - View the full discussion
Seems Adobe Air or Cummunity help has gone cprrupt. Lets follow the below suggestions:
Step 1: Uninstall adobe air from Utilities and re-install the latest adobe AIR from "http://get.adobe.com/air/otherversions/"
Step 2: Follow "http://kb2.adobe.com/cps/842/cpsid_84215.html" and re-install the Community Help Air application.
Step 3: Restart the machine and launch adobe Community Help and try to install all the updates and check if it works fine.
Hope that Helps!.
Arpit
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4356729#4356729
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4356729#4356729. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Tried to updated to new ios 6.1 but the prep file failed in itunes...now my iphone4s is stuck on the screen to connect usb to itunes BUT nothhing happens when connected. HELP HELP

tried to updated to new ios 6.1 but the prep file failed in itunes...now my iphone4s is stuck on the screen to connect usb to itunes BUT nothing happens when connected. HELP HELP
I tired reboot the phone and placing the DFU BUT still the phone reverts back to itunes logo and ucb connection sceen

Place the device in DFU mode, connect to the computer and restore.

EPS files does not render correctly in CS4 & CS5, but looks fine in CS2

Hello,
I am experiencing rendering issues with EPS files under CS4 and CS5. I don't believe there is anything wrong with the EPS file, as the file will render correctly under CS2.
The EPS is a map of Australia, and it's the hill shading that fails to render correctly:
CS2 (rendes correctly):
CS4 (hill shading corruption):
CS5 (hill shading corruption):
Any help would be greatly appreciated.
Many thanks,
-nav.

Is it possible that you see the native AI data in CS2 because it has been embedded in the EPS? To me it very much looks this way, since the actual EPSdata never even has complete outlines in your other images. This is a strong indication that the paths were never properly segmented for EPS export to begin with...
Mylenium

I am using itunes 10 and trying to consolidate my files. I keep getting the error "Copying files failed. The file name was invalid or too long". How can I indentify what file is causing this problem or resolve this issue?

I am using itunes 10 and trying to consolidate my files. I keep getting the error "Copying files failed. The file name was invalid or too long". How can I indentify what file is causing this problem or resolve this issue?

BUMP
Yes, I just get that message. I don't see how I could investigate this problem.
I didn't mention that this happened when I was consolidating my library, not copying files to another computer.
In other words, I'm using a "normal" itunes procedure, itunes won't complete it, and won't tell me exactly why or how to figure out how to fix it...
Is there at least some easy way to tell which files were successfully copied to my itunes music folder so I can work on moving the uncopied files?
Can anybody help me?

Attempt to process file failed with ClassCastException

Hi
I have checked in <b>http://host:por/MessageSystem</b> there i got the following error...
<b>Attempt to process file failed with ClassCastException</b>
Can any one please tell me how to resolve the problem
Best Regards
Ravi Shankar B

Ravi,
I dont think it is feasible. Eventhough you have two files with the same name do you have the data same? Practically it should not be. Let us know your complete requiremens. Also see this link for some help on file validations:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.highlightedcontent?documenturi=%2flibrary%2fxi%2fxi-design_configuration%2ffileValidationsinSAPXI-ACaseStudy.pdf
---Satish

Files failing to render completely. HELP!

Similar Messages

Maybe you are looking for