ERROR: validate with data file failed

Hi,
We are using SAP BPC 7.5 NW SP08(Admin & client). We are trying to load transaction data from BW actual cube to BPC application for which we have written the following transformation file.
*MAPPING
CATEGORY=*NEWCOL(ACTUAL)
P_ACCT2=MVAL(0RECTOTSTCK|NEWCOL(PRODQU))
P_DATASRC=*NEWCOL(INPUT)
MATERIALBW=0MATERIAL
RPTCURRENCY=0LOC_CURRY
TIME=0CALMONTH
SIGNEDDATA=0RECTOTSTCK
*CONVERSION
TIME=Conversion for IM Actuals.XLS!CONVERSION
We want to map BW keyfigure 0RECTOTSTK (production quantity) to PRODQU - a member of the dimension P_ACCT2. And also we want to load the data from that key figure into our SIGNEDDATA field in BPC.
We have validated and processed the conversion file without error, but getting the following error while validating definition of the transformation file:
"ERROR: validate with data file failed"
Can you please help on this.
Thanks in advance.
Appu

Issue was resolved.We were trying to load data from the cube 0IC_C03.However, that cube had some non-cumulative key figures. BPC 7.5 SP08 does not allow data to be loaded from BW cubes having non-cumulative key-figures to BPC Cubes.This is a bug which will be rectified in SP11 according to SAP.
Since we needed only 0RECTOTSTCK which is a cumulative key figure we created a separate BW cube and loaded it from 0IC_C03 using only the necessary cumulative key figures and other dimensions.We then used the new cube to load data into BPC cube and it worked.

Similar Messages

Validation with data file failed

Hello All
I have loaded the Currency Exchange Rates from BW cube into Rate Model in BPC upto March 2014 and then our BW cube get updated the Exchange Rates for April 2014.
Now I am trying to load the Exchange Rates for April 2014 only into Rate model and for that I am validating the Transformation File but it was failed. It shows 'VALIDATION WITH DATA FILE FAILED'.
Rejected list option showing blank screen.
With the same Transformation file I have loaded the data upto March 2014 successfully.
I have compressed the source cube, reactivate the source cube after all am unable to validate the Transformation file. Below is my transformation file screen shot.
Please let me know if you need any more details from my side.
Thanku you all in advance.
Please help
Regards
Srikant

Hi Shaik
Thanks for your reply.
I have validate the Transformaiton file by given vlaue in MAXREJECTCOUNT= 10000 but there is no chage same error is coming. 'Validation with data file failed' without any errors.
Thanks
Srikant

Upgrading to ISE 1.3 error ISE Global data upgrade failed!

HI,
Has anyone come across this issue? when upgrading, it seems to start all well but then this happens:
- Data upgrade step 40/67, CertMgmtUpgradeService(1.3.0.616)... % Error: ISE Global data upgrade failed!
Rolling back the configuration database...
Starting application after rollback...
% Error: The node has been reverted back to its pre-upgrade state.
% Application install or upgrade cancelled.
I've also upgraded it to the latest patch and tried again but to no avail. This is an appliance (3415) that came shipped with 1.2. It's not been configured other than the initial cli wizard. I've upgraded a fair few appliances but I haven't seen this issue come up before. Any thoughts?
Thanks in advance for any info...

If this is a test setup then you can do fresh ISE install.back up existing config and restore it to 1.3. If its production then contact TAC

Outlook 2010 Sending' reported error (0x8004010F): "Outlook data file cannot be accessed.'

I recently moved my outlook directory to a different drive as my C: drive was getting full.
Everything went smoothly except for now I cannot send emails from any of my addresses with the error "Sending' reported error (0x8004010F): "Outlook data file cannot be accessed.'" that I've associated with outlook. Recently I
uninstalled all of Microsoft Office (student) and reinstalled it on the new drive, still getting the same error. I've tried following the steps at http://support.microsoft.com/kb/2659085/en-us
but when I go into the Control Panel to click on Mail (in this case Mail (32-bit) even though I run a 64-bit OS), the icon in the control panel is a piece of paper (leading me to believe it's broken) and when I click on it, nothing happens. I don't
mean my screen flickers or even thinks about doing anything with the swirly circle cursor... it does absolutely nothing.

Hi Stintedvisions,
Generally,
“0x8004010f: Outlook data file cannot be accessed” error is occurred due to wrong configuration of Outlook profile. And as you said that you have been trying all Microsoft methods to resolve, but it’s still not working, then you should use
the inbuilt utility of Microsoft called scanpst.exe. It can identify the bug and repair Outlook in minutes of times.
Thanks
Clark Kent

NWDI Creating Track Error:Communication with the CMS failed

Hi All,
We are trying to setup NWDI in our landscape.When we are going to setup an NWDI Track for EP 7.0 SP16 ,getting the message
Validation Error: Communication with the CMS failed. Ensure that the URL is correct, that the CMS is up an running, and that the given user has administrative access rights for the CMS
Can any body help us.We are new to NWDI.
Regards,
Vijay

Vijay...
In your landscape navigate to
http://<host>:<port>/webdynpro/dispatcher/sap.com/tcSLCMS~WebUI/Cms
Select "Landscape Configurator"
Now select "Domain Data"
There check the CMS credentials.....
Get it cross checked with basis team...if you are using correct CMS URL....
Second user that you have given there for login purpose must be replication of NWDI_CMSADM user id...
Compare your user with this user permissions and roles.

Excel 2007 = Refresh All = Error Message "Initialization Data Source Failed"

Excel 2007 => Data Tab - Refresh All => Error Message "Initialization Data Source Failed
2nd Error message:
The following data ranged failed to refresh: ExternalData1 - Continue to refresh all
How do I resolve this? Trying to connect to Oracle DB environment 12C

What will happen if you rebuild the PivotTable/Table ?
Make sure the external database is available and the Oracle Provider for OLE DB is installed correctly.
Wind Zhang
TechNet Community Support

ORA-01012: not logged on error while Moving data file with BrTools

Hi,
I'm trying to move a data file to another windows drive with BrTools.
It fails before it actually starts to move the file. The error it shows is:
ORA-01012: not logged on.
Thanks,
Anil.

Hi,
BRSPACE has a command option -u to specify the Database user and password. How ever BRSPACE connects to the database as SYSDBA, you do not have to specify the user and password if the operating system user belongs to the dba group.SO check if the user is falling in DBA group with proper authorizations.
PLease reward points for useful answers.
Regards,
Phani

Importing CSV file with Data Merge Fails

Specs
See pasted text from CSV at http://pastebin.com/mymhugpN
I am using InDesign CS6 (8.0.1)
I created the CSV by downloading it from a Google Spreadsheet as a CSV. I confirm with the Terminal that the character encoding is utf-8 usnig the file command.
Problem detailed
I am trying to import a CSV file (utf-8) with Data Merge via the Select Data Source... command with Show Import Options checked. When viewing the Data Source Import Options dialog, I set the following options—Delimiter:Comma, Encoding:Unicode, Platform:Macintosh. I leave Preserve Spaces in Data Source unchecked. It fails to import any variables and produces no error message. I have tried other CSV files as well (created TextEdit, Espresso, etc.) and it seems that InDesign will not import any files if Unicode is specified as the encoding, no matter which other options are specified.
Can anyone else confirm this?
Importing as ACSII works, but obviously does not display my content correctly.

Mike is having some trouble posting in this thread (and I am too), but he sent me a PM with what he wanted to say:
OK. I think I might have a positive answer for you.
I was getting lost in the upper ASCII characters you showed. In your test file I never could see any--a case of not seeing the trees for the forest.
Your quote marks are getting dropped in your test file. Now, this may or may not affect other factors but it does in some further testing. I believe ID has an issue with dropping quote marks even in a plain ASCII file if the marks are at the beginning of a sentence and the file is tab delimited. Call it a bug.
Because of all the commas and quote marks in your simple file, I think you should be exporting from Google Docs' spreadsheet as a tab-delimited file. This exported file has to be opened in a text editor capable of saving it out as a UTF-16 BE (Big Endian) type of file.
Also, I think you are going to have to use proper quote marks throughout, or change them in the exported tab-delimited file. Best to have a correct source, though.
Here is your sample ZIPped up. I think it works properly. But then again, I think I might be bleary-eyed by now.
http://www.wenzloffandsons.com/temp/merge_psalms_utf-16.zip
Take care, Mike

On load, getting error: Field in data file exceeds maximum length

Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
PL/SQL Release 11.2.0.3.0 - Production
CORE    11.2.0.3.0    Production
TNS for Solaris: Version 11.2.0.3.0 - Production
NLSRTL Version 11.2.0.3.0 - Production
I'm trying to load a table, small in size (110 rows, 6 columns). One of the columns, called NOTES is erroring when I run the load. It is saying that the column size exceeds max limit. As you can see here, the table column is set to 4000 Bytes)
CREATE TABLE NRIS.NRN_REPORT_NOTES
NOTES_CN      VARCHAR2(40 BYTE)               DEFAULT sys_guid()            NOT NULL,
REPORT_GROUP VARCHAR2(100 BYTE)              NOT NULL,
AREACODE      VARCHAR2(50 BYTE)               NOT NULL,
ROUND         NUMBER(3)                       NOT NULL,
NOTES         VARCHAR2(4000 BYTE),
LAST_UPDATE   TIMESTAMP(6) WITH TIME ZONE     DEFAULT systimestamp          NOT NULL
TABLESPACE USERS
RESULT_CACHE (MODE DEFAULT)
PCTUSED    0
PCTFREE    10
INITRANS   1
MAXTRANS   255
STORAGE    (
            INITIAL          80K
            NEXT             1M
            MINEXTENTS       1
            MAXEXTENTS       UNLIMITED
            PCTINCREASE      0
            BUFFER_POOL      DEFAULT
            FLASH_CACHE      DEFAULT
            CELL_FLASH_CACHE DEFAULT
LOGGING
NOCOMPRESS
NOCACHE
NOPARALLEL
MONITORING;
I did a little investigating, and it doesn't add up.
when i run
select max(lengthb(notes)) from NRIS.NRN_REPORT_NOTES
I get a return of
643
That tells me that the largest size instance of that column is only 643 bytes. But EVERY insert is failing.
Here is the loader file header, and first couple of inserts:
LOAD DATA
INFILE *
BADFILE './NRIS.NRN_REPORT_NOTES.BAD'
DISCARDFILE './NRIS.NRN_REPORT_NOTES.DSC'
APPEND INTO TABLE NRIS.NRN_REPORT_NOTES
Fields terminated by ";" Optionally enclosed by '|'
NOTES_CN,
REPORT_GROUP,
AREACODE,
ROUND NULLIF (ROUND="NULL"),
NOTES,
LAST_UPDATE TIMESTAMP WITH TIME ZONE "MM/DD/YYYY HH24:MI:SS.FF9 TZR" NULLIF (LAST_UPDATE="NULL")
BEGINDATA
|E2ACF256F01F46A7E0440003BA0F14C2|;|DEMOGRAPHICS|;|A01003|;3;|Demographic results show that 46 percent of visits are made by females. Among racial and ethnic minorities, the most commonly encountered are Native American (4%) and Hispanic / Latino (2%). The age distribution shows that the Bitterroot has a relatively small proportion of children under age 16 (14%) in the visiting population. People over the age of 60 account for about 22% of visits.   Most of the visitation is from the local area. More than 85% of visits come from people who live within 50 miles.|;07/29/2013 16:09:27.000000000 -06:00
|E2ACF256F02046A7E0440003BA0F14C2|;|VISIT DESCRIPTION|;|A01003|;3;|Most visits to the Bitterroot are fairly short. Over half of the visits last less than 3 hours. The median length of visit to overnight sites is about 43 hours, or about 2 days. The average Wilderness visit lasts only about 6 hours, although more than half of those visits are shorter than 3 hours long.   Most visits come from people who are fairly frequent visitors. Over thirty percent are made by people who visit between 40 and 100 times per year. Another 8 percent of visits are from people who report visiting more than 100 times per year.|;07/29/2013 16:09:27.000000000 -06:00
|E2ACF256F02146A7E0440003BA0F14C2|;|ACTIVITIES|;|A01003|;3;|The most frequently reported primary activity is hiking/walking (42%), followed by downhill skiing (12%), and hunting (8%). Over half of the visits report participating in relaxing and viewing scenery.|;07/29/2013 16:09:27.000000000 -06:00
Here is the full beginning of the loader log, ending after the first row return. (They ALL say the same error)
SQL*Loader: Release 10.2.0.4.0 - Production on Thu Aug 22 12:09:07 2013
Copyright (c) 1982, 2007, Oracle. All rights reserved.
Control File:   NRIS.NRN_REPORT_NOTES.ctl
Data File:      NRIS.NRN_REPORT_NOTES.ctl
Bad File:     ./NRIS.NRN_REPORT_NOTES.BAD
Discard File: ./NRIS.NRN_REPORT_NOTES.DSC
(Allow all discards)
Number to load: ALL
Number to skip: 0
Errors allowed: 50
Bind array:     64 rows, maximum of 256000 bytes
Continuation:    none specified
Path used:      Conventional
Table NRIS.NRN_REPORT_NOTES, loaded from every logical record.
Insert option in effect for this table: APPEND
   Column Name                  Position   Len Term Encl Datatype
NOTES_CN                            FIRST     *   ; O(|) CHARACTER
REPORT_GROUP                         NEXT     *   ; O(|) CHARACTER
AREACODE                             NEXT     *   ; O(|) CHARACTER
ROUND                                NEXT     *   ; O(|) CHARACTER
    NULL if ROUND = 0X4e554c4c(character 'NULL')
NOTES                                NEXT     *   ; O(|) CHARACTER
LAST_UPDATE                          NEXT     *   ; O(|) DATETIME MM/DD/YYYY HH24:MI:SS.FF9 TZR
    NULL if LAST_UPDATE = 0X4e554c4c(character 'NULL')
Record 1: Rejected - Error on table NRIS.NRN_REPORT_NOTES, column NOTES.
Field in data file exceeds maximum length...
I am not seeing why this would be failing.

HI,
the problem is delimited data defaults to char(255)..... Very helpful I know.....
what you need to two is tell sqlldr hat the data is longer than this.
so change notes to notes char(4000) in you control file and it should work.
cheers,
harry

About error ORA-01208: data file is an old version - not accessing current

Hi friends,
After getting an error ,what i have stated below, my database instance was crashed everytime. I have seen alert.log file nothing is there and this error never come in pattern maner it will come anytime during week.
I have check with my application client they were doing nothing during this time even they have sent me their log i found no writing process was running and no jobs were running during this time.
My oracle version is 10.2.0.3 and os version is W2k.
Thanks in advance.
PM
Thu Oct 04 21:45:37 2007
Errors in file d:\oracle\admin\prd347\bdump\prd347_ckpt_1296.trc:
ORA-01242: data file suffered media failure: database in NOARCHIVELOG mode
ORA-01122: database file 7 failed verification check
ORA-01110: data file 7: 'E:\ORADATA\PRD347\CCDM_DATA_SMALL_T01_01.DBF'
ORA-01208: data file is an old version - not accessing current version
Thu Oct 04 21:45:37 2007
Errors in file d:\oracle\admin\prd347\bdump\prd347_ckpt_1296.trc:
ORA-01242: data file suffered media failure: database in NOARCHIVELOG mode
ORA-01122: database file 7 failed verification check
ORA-01110: data file 7: 'E:\ORADATA\PRD347\CCDM_DATA_SMALL_T01_01.DBF'
ORA-01208: data file is an old version - not accessing current version
_________________________________________________________________

Hi,
I am attaching this CKPT Trace file which might helpful to you all.
V10 STYLE FILE HEADER:
Compatibility Vsn = 169869312=0xa200000
Db ID=2446524247=0x91d2ff57, Db Name='PRD347'
Activation ID=0=0x0
Control Seq=654516=0x9fcb4, File size=491520=0x78000
File Number=7, Blksiz=16384, File Type=3 DATA
Tablespace #7 - CCDM_DATA_SMALL_T01 rel_fn:7
Creation at scn: 0x0781.e33c8c09 12/13/2004 15:16:45
Backup taken at scn: 0x0000.00000000 01/01/1988 00:00:00 thread:0
reset logs count:0x201c7917 scn: 0x0000.00000001 reset logs terminal rcv data:0x0 scn: 0x0000.00000000
prev reset logs count:0x0 scn: 0x0000.00000000 prev reset logs terminal rcv data:0x0 scn: 0x0000.00000000
recovered at 09/25/2007 12:17:31
status:0x4 root dba:0x00000000 chkpt cnt: 211627 ctl cnt:211626
begin-hot-backup file size: 0
Checkpointed at scn: 0x079b.81db9e4f 10/04/2007 21:45:15
thread:1 rba:(0x33cee.2.10)
enabled threads: 01000000 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000
Backup Checkpointed at scn: 0x0000.00000000
thread:0 rba:(0x0.0.0)
enabled threads: 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000
External cache id: 0x0 0x0 0x0 0x0
Absolute fuzzy scn: 0x0000.00000000
Recovery fuzzy scn: 0x0000.00000000 01/01/1988 00:00:00
Terminal Recovery Stamp 01/01/1988 00:00:00
Platform Information: Creation Platform ID: 7
Current Platform ID: 7 Last Platform ID: 7
DATA FILE #7:
(name #18) E:\ORADATA\PRD347\CCDM_DATA_SMALL_T01_01.DBF
creation size=0 block size=16384 status=0xe head=18 tail=18 dup=1
tablespace 7, index=7 krfil=7 prev_file=0
unrecoverable scn: 0x0000.00000000 01/01/1988 00:00:00
Checkpoint cnt:211628 scn: 0x079b.81dba014 10/04/2007 21:45:20
Stop scn: 0xffff.ffffffff 10/03/2007 02:00:10
Creation Checkpointed at scn: 0x0781.e33c8c09 12/13/2004 15:16:45
thread:0 rba:(0x0.0.0)
enabled threads: 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000
Offline scn: 0x0000.00000000 prev_range: 0
Online Checkpointed at scn: 0x0000.00000000
thread:0 rba:(0x0.0.0)
enabled threads: 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000
Hot Backup end marker scn: 0x0000.00000000
aux_file is NOT DEFINED
ORA-01242: data file suffered media failure: database in NOARCHIVELOG mode
ORA-01122: database file 7 failed verification check
ORA-01110: data file 7: 'E:\ORADATA\PRD347\CCDM_DATA_SMALL_T01_01.DBF'
ORA-01208: data file is an old version - not accessing current version
error 1242 detected in background process
ORA-01242: data file suffered media failure: database in NOARCHIVELOG mode
ORA-01122: database file 7 failed verification check
ORA-01110: data file 7: 'E:\ORADATA\PRD347\CCDM_DATA_SMALL_T01_01.DBF'
ORA-01208: data file is an old versio n - not accessing current version
------------------------------------------------------------------------------------------------

Date Format error while loading *.dat file to Sataging .

Hi All ,
Loading data from *.dat file in to Staging , the dat file contains data for date in 'MM-DD-YYYY' format which is String , when it loading by control file it produce the error date format is not supported .I think ti required DD-MM-YYYY format . Is their any properties to change the date format or else need to write the function for converting date format .
I am using OWb 10g Release 1 , with same DB .
Please guide me
Thanx in advance
Regards ,

Hi,
Before loading into staging, you can use Expression operator to convert the CHAR into DATE with something like this:
TO_DATE('01-02-2005','MM-DD-YYYY')
Hope this helps.

New domain, Roaming Profiles, Outlook 2010 gives error 'Your Outlook data file cannot be configured'.

Hi there,
I have recently setup a new domain, with a new domain controller and new exchange 2013 server.
these are running on a cluster of 2 x hyper-v 2012r2 hosts. All VMs are running server 2012 r2.
although I don't think that has any bearing on my issue.
I have migrated all of my existing user machines to the new domain.
We use roaming profiles.
When a user logs into their PC for the first time, all is ok.
when a user logs into a different machine (they log off of their first machine and then log into a second machine),
they get the following error when opening outlook.
'Your Outlook data file cannot be configured. C:\Users\%username%.domain\AppData\Local\Microsoft\Outlook\[email protected]'
I can manually resolve this on each machine by doing one of the following.
1. Before the user logs in, I log in as an administrator or browse to the pc from another machine create a folder in users called 'whatevertheuserssusernameis' (please note, I actually put in the user's username, ie OKIRWAN)
when the user then logs in, their profile is created in %username%.domain instead of %username%.
I believe this is the route of the problem, as when we added the new machines to the domain, and they logged in for the first time to their 'usual machine', there was already a folder in users with their username, so when we added to the new domain and logged
in for the first time, it created a new folder called %username%.domain, however when the user logs into a pc they never have logged into before, it creates their profile in %username% but their roaming profile is looking for their OST in C:\Users\%username%.domain\AppData\Local\Microsoft\Outlook\[email protected].
2. My second way around this is to go to control panel and mail and remove and recreate the users outlook profile.
As I have 100 users, who move to various different machines, these manual options are not really viable.
I have tried redirecting the OST file to c:\OST via group policy, this did not resolve the issue.
All users are local admins on their machines.
if I open outlook as administrator then it loads ok and creates the OST file in C:\Users\%username%.domain\AppData\Local\Microsoft\Outlook\[email protected].
however if I close outlook and open it again without running as administrator I get the following error.
File access is denied. You do not have the permission required to access the file C:\Users\%username%.domain\AppData\Local\Microsoft\Outlook\[email protected]. (even administrators on that PC have full access to that folder).
All users are running outlook 2010.
Any help would be much appreciated.
Kind Regards
Owen

Hi,
We can try to set up new profiles for users via creating a PRF file using the Office Customization Tool.
http://technet.microsoft.com/en-us/library/cc179062(v=office.14).aspx
Best Regards,
Steve Fan
TechNet Community Support

SQL*Loader Error Field in data file exceeds maximum length", version 8.1.6

Hi All,
I am trying to load a data file into a database table using SQL loader. I
received the data in an data file but I saved it as a pipe delimited
file.
When I run the SQL Loader command no records are loaded - looking at the log
file I get the following error:
Rejected - Error on table FARESDATA, column FANOTESIN.
Then I tried with substr and doesnt seem to work for values greater than 4000 chars, it only works if the field value is below 4000 chars (say doing a substr for first 3000 chars).
see the code--------
LOAD DATA
INFILE 'p.dat'
APPEND INTO TABLE PROSPECTUS
FIELDS TERMINATED BY '|' OPTIONALLY ENCLOSED BY '"'
TRAILING NULLCOLS
Fanotesin char(4000) "substr(:fanotesin,1,4000)"
We get the error ORA-01461: can bind a LONG value only for insert into a LONG column when using substr for 4000 chars.
Please help!
Thanks,
Rajesh
null

I believe the problem here is that the ORACLE database regards anything > 4000chs as a CLOB (or LONG). 4000 is the maximum length of a varchar2 field in the database, although of course you can declare larger values in PL/SQL. (Since the incoming data is > 4000 chs it is regarded as a LONG and you cannot therefore use SUBSTR on it)
I think that you must either truncate your data before loading or load into a table with the offending field as a CLOB (or LONG)
and then use PL/SQL to recreate it in a table with a varchar2(4000) which is otherwise identical. (You can select from a LONG into a varchar2(32000) for example and then truncate before writing out to the new table).

ORA-01511:error in renaming data file & ORA-01516: nonexistent data file

Hi all,
DB version is 10.2.0.2 and Applications 12.0.6 on RHEL 4
While creating data file mistakenly we created with '?' as follows:
"/d01/CRP/db/apps_st/data/tx_?data53.dbf"
After that we tried to rename those data file using below steps but we are geting error message as follows:
1.SQL>ALTER TABLESPACE APPS_TS_TX_DATA OFFLINE NORMAL; at DB in OPEN stage
2.$mv /d01/CRP/db/apps_st/data/tx_?data53.dbf /d01/CRP/db/apps_st/data/tx_data53.dbf
3.ALTER TABLESPACE APPS_TS_TX_DATA RENAME DATAFILE '/d01/CRP/db/apps_st/data/tx_?data53.dbf' TO '/d01/CRP/db/apps_st/data/tx_data53.dbf';
ERROR at line 1:
ORA-01511: error in renaming log/data files
ORA-01516: nonexistent log file, datafile, or tempfile
"/d01/CRP/db/apps_st/data/tx_?data53.dbf"
After that we tried to revert back by moving to original name usinf os commnds i.e tx_?data53.dbf and tried to open the database as follows but getting error message as follows:
SQL> startup mount
ORACLE instance started.
Total System Global Area 1073741824 bytes
Fixed Size 1264892 bytes
Variable Size 440402692 bytes
Database Buffers 620756992 bytes
Redo Buffers 11317248 bytes
Database mounted.
SQL> recover database;
Media recovery complete.
SQL> alter database open ;
alter database open
ERROR at line 1:
ORA-01092: ORACLE instance terminated. Disconnection forced
Please help us t oresolve the Issue
Edited by: 912734 on Feb 15, 2012 2:43 AM

Errors in alert log file:
ALTER TABLESPACE APPS_TS_TX_DATA RENAME DATAFILE '/d01/CRP/db/apps_st/data/tx_?data53.dbf' TO '/d01/CRP/db/apps_st/data/tx_data53.dbf'
Wed Feb 15 15:38:58 2012
ORA-1525 signalled during: ALTER TABLESPACE APPS_TS_TX_DATA RENAME DATAFILE '/d01/CRP/db/apps_st/data/tx_?data53.dbf' TO '/d01/CRP/db/apps_st/data/tx_data53.dbf'...
Wed Feb 15 15:40:10 2012
ALTER TABLESPACE APPS_TS_TX_DATA RENAME DATAFILE '/d01/CRP/db/apps_st/data/tx_ data53.dbf' TO '/d01/CRP/db/apps_st/data/tx_data53.dbf'
Wed Feb 15 15:40:10 2012
ORA-1525 signalled during: ALTER TABLESPACE APPS_TS_TX_DATA RENAME DATAFILE '/d01/CRP/db/apps_st/data/tx_ data53.dbf' TO '/d01/CRP/db/apps_st/data/tx_data53.dbf'...
ALTER TABLESPACE APPS_TS_TX_DATA ONLINE
Wed Feb 15 15:41:09 2012
Errors in file /d01/CRP/db/tech_st/10.2.0/admin/CRP2_oraapps/bdump/crp2_dbw0_1605.trc:
ORA-01157: cannot identify/lock data file 11 - see DBWR trace file
ORA-01110: data file 11: '/d01/CRP/db/apps_st/data/tx_
data53.dbf'
ORA-27037: unable to obtain file status

Error 6 with Open File

My SW is running on a FP2000 with LV7.1. It generates many text files; periodically, the files are opened, a few lines are added, and the files are reclosed. The program runs fine for 15 minutes or so, then suddenly all "Open/create/replace file.vi" start to fail. I debugged them and i saw that it's "Open File" that fails. From now on it will always generate error 6 for every file, existing or new. I debugged the file paths wired to Open File, they're valid, and there's nothing new with name formats, file sizes, file contents, access mode... Also:
- during this condition, FTP server doesn't work: i can browse the FP disk but can't transfer files
- if i stop the program, FTP starts working again
- if i reboot the FP or simply restart the program, all is ok again (for 15 minutes...)
- if i run the same program under windows, i don't experience the problem
- i've already tried to reformat the flash disk
help!!!

As the error comes up after some time the code has been running and it disappears whenever you restart your target, it appears the problem has to do with something that builds up over time.
I suggest you use the Tools>>Realtime System Manager to track what happens on the FP from a Memory/CPU point of view.
Also, try and see what happens with the attached example on your FP. I tested this on mine and it does not seem to cause any problem.
Attachments:
FileWrite(RT).vi ‏48 KB

ERROR: validate with data file failed

Similar Messages

Maybe you are looking for