Files not removed with Pacman Uninstall

Programs can make new files etc. upon run. How do you keep track of where these files go?
I see your user directory is where many (all?) applications store config files. But what about other possible files? Are there other places where they often are stored, except tmp and var?
In Windows you have uninstallers to keep track of left over files. Linux doesn't have a registry, but I was thinking of other files.

To quote the Pacman page in Archwiki:
Note: pacman will not remove configurations that the application itself creates (for example .dot files in the home folder).
Configurations (system wide and not current user related) are also stored in /etc. Regarding these config files, this is what the pacman page in Archwiki has to say:
Pacman saves important configuration files when removing certain applications and names them with the extension: .pacsave. To delete these backup files use the -n option
User specific config files, which are created in $HOME are left to the user to clean up
PS: The ArchWiki has a wealth of information. Please read the information there.. You can post here if you still have questions

Similar Messages

  • Can't open file--"not compatible with this version"

    I can not open a photoshop file, although it was saved with the same version. "The file is not compatible with this version" can someone help me.
    thanks

    hi kirsti
    I use windows 7 and photoshop cs5
    thank you
    Am 02.05.2012 19:06, schrieb Kirsti Aho:
    >
          Re: Can't open file--"not compatible with this version"
    created by Kirsti Aho <http://forums.adobe.com/people/Kirsti-CA> in
    /Community Help Application/ - View the full discussion
    <http://forums.adobe.com/message/4374618#4374618

  • Ctxhx temporary files not removed?

    Hi,
    I am using Context in a 8.1.6.0.0 database.
    The documents that are indexed are primarily acrobat files.
    Now I have found many thousands of zero byte files in /var/tmp ,
    in a format like "AcroAAAZcaqXn" and all created by user oracle.
    To me this looks like temporary files not cleaned up, is this
    a known problem with ctxhx?
    regards /Curt

    To quote the Pacman page in Archwiki:
    Note: pacman will not remove configurations that the application itself creates (for example .dot files in the home folder).
    Configurations (system wide and not current user related) are also stored in /etc. Regarding these config files, this is what the pacman page in Archwiki has to say:
    Pacman saves important configuration files when removing certain applications and names them with the extension: .pacsave. To delete these backup files use the -n option
    User specific config files, which are created in $HOME are left to the user to clean up
    PS: The ArchWiki has a wealth of information. Please read the information there.. You can post here if you still have questions

  • File not found error on Uninstall

    Hi,
    Got a problem with the deinstallation of Labviewer. I deployed Labviewer with all moduls using the setup.exe's and specfiles.
    Installation worked fine and the software runs well.
    But when I try to uninstall running "uninst.exe /log C:\temp\uninst.log /qb /x all"
    It immediatly starts with an error stating "File not found RegDeleteKey" (see Attachment).
    Judging by ProcMon and ProcessExplorer the Exception i caused from the nirg.exe.
    If I click ok, the deinstallation goes on and finishes. Anyone an Idea on this topic?
    Greetings, Alex
    Attachments:
    NI-Error.JPG ‏32 KB

    Yes that is excactly the problem.
    The System is Windows 7 64Bit (Enterprise) and I used Labviewer 12. We installed all Modules from the 4 DVDs provided , as this was requested by the department which will use the software.
    The error itself seems to be connected to the NIRG module. If I leave NIRG out from the installation, the deinstallation of all other modules works without an error.
    Best Regards,
    Alexander Jarke

  • Empty/underutilized log files not removed

    I have an application that runs the cleaner and the checkpointer explicitly (instead of relying on the database to do it).
    Here are the relevant environment settings: je.env.runCheckpointer=false, je.env.runCleaner=false, je.cleaner.minUtilization=5, je.cleaner.expunge=true.
    When running the application, I noticed that the few dozen log files have been removed, but later (even the cleaner was executed at regular intervals), no more log files were removed.
    I have run the DbSpace utility on the environment and found the following result:
    File Size (KB) % Used
    00000033 97656 0
    00000034 97655 0
    00000035 97656 0
    00000036 97656 0
    00000037 97656 0
    00000038 97655 2
    00000039 97656 0
    0000003a 97656 0
    0000003b 97655 0
    0000003c 97655 0
    0000003d 97655 0
    0000003e 97655 0
    0000003f 97656 0
    00000040 97655 0
    00000041 97656 0
    00000042 97656 0
    00000043 97656 0
    00000044 97655 0
    00000045 97655 0
    00000046 97656 0
    This goes on for a long time. I had the database tracing enabled at CONFIG level. Here are the last lines of the log just before the last log file (0x32) is removed:
    2009-05-06 08:41:51:111:CDT INFO CleanerRun 49 on file 0x30 begins backlog=2
    2009-05-06 08:41:52:181:CDT SEVERE CleanerRun 49 on file 0x30 invokedFromDaemon=false finished=true fileDeleted=false nEntriesRead=206347 nINsObsolete=6365 nINsCleaned=0 nINsDead=0 nINsMigrated=0 nLNsObsolete=199971 nLNsCleaned=0 nLNsDead=0 nLNsMigrated=0 nLNsMarked=0 nLNQueueHits=0 nLNsLocked=0
    2009-05-06 08:41:52:182:CDT INFO CleanerRun 50 on file 0x31 begins backlog=1
    2009-05-06 08:41:53:223:CDT SEVERE CleanerRun 50 on file 0x31 invokedFromDaemon=false finished=true fileDeleted=false nEntriesRead=205475 nINsObsolete=6319 nINsCleaned=0 nINsDead=0 nINsMigrated=0 nLNsObsolete=199144 nLNsCleaned=0 nLNsDead=0 nLNsMigrated=0 nLNsMarked=0 nLNQueueHits=0 nLNsLocked=0
    2009-05-06 08:41:53:224:CDT INFO CleanerRun 51 on file 0x32 begins backlog=0
    2009-05-06 08:41:54:292:CDT SEVERE CleanerRun 51 on file 0x32 invokedFromDaemon=false finished=true fileDeleted=false nEntriesRead=205197 nINsObsolete=6292 nINsCleaned=0 nINsDead=0 nINsMigrated=0 nLNsObsolete=198893 nLNsCleaned=0 nLNsDead=0 nLNsMigrated=0 nLNsMarked=0 nLNQueueHits=0 nLNsLocked=0
    2009-05-06 08:42:24:300:CDT INFO CleanerRun 52 on file 0x33 begins backlog=1
    2009-05-06 08:42:24:546:CDT CONFIG Checkpoint 963: source=api success=true nFullINFlushThisRun=13 nDeltaINFlushThisRun=0
    2009-05-06 08:42:24:931:CDT SEVERE Cleaner deleted file 0x32
    2009-05-06 08:42:24:938:CDT SEVERE Cleaner deleted file 0x31
    2009-05-06 08:42:24:946:CDT SEVERE Cleaner deleted file 0x30
    Here are a few log lines right after the last log message with cleaner deletion (until the next checkpoint):
    2009-05-06 08:42:25:339:CDT SEVERE CleanerRun 52 on file 0x33 invokedFromDaemon=false finished=true fileDeleted=false nEntriesRead=204164 nINsObsolete=6277 nINsCleaned=0 nINsDead=0 nINsMigrated=0 nLNsObsolete=197865 nLNsCleaned=11 nLNsDead=0 nLNsMigrated=0 nLNsMarked=11 nLNQueueHits=9 nLNsLocked=0
    2009-05-06 08:42:25:340:CDT INFO CleanerRun 53 on file 0x34 begins backlog=0
    2009-05-06 08:42:26:284:CDT SEVERE CleanerRun 53 on file 0x34 invokedFromDaemon=false finished=true fileDeleted=false nEntriesRead=203386 nINsObsolete=6281 nINsCleaned=0 nINsDead=0 nINsMigrated=0 nLNsObsolete=197091 nLNsCleaned=2 nLNsDead=2 nLNsMigrated=0 nLNsMarked=0 nLNQueueHits=0 nLNsLocked=0
    2009-05-06 08:42:56:290:CDT INFO CleanerRun 54 on file 0x35 begins backlog=4
    2009-05-06 08:42:57:252:CDT SEVERE CleanerRun 54 on file 0x35 invokedFromDaemon=false finished=true fileDeleted=false nEntriesRead=205497 nINsObsolete=6312 nINsCleaned=0 nINsDead=0 nINsMigrated=0 nLNsObsolete=199164 nLNsCleaned=10 nLNsDead=3 nLNsMigrated=0 nLNsMarked=7 nLNQueueHits=6 nLNsLocked=0
    2009-05-06 08:42:57:253:CDT INFO CleanerRun 55 on file 0x39 begins backlog=4
    2009-05-06 08:42:58:097:CDT SEVERE CleanerRun 55 on file 0x39 invokedFromDaemon=false finished=true fileDeleted=false nEntriesRead=204553 nINsObsolete=6301 nINsCleaned=0 nINsDead=0 nINsMigrated=0 nLNsObsolete=198238 nLNsCleaned=2 nLNsDead=0 nLNsMigrated=0 nLNsMarked=2 nLNQueueHits=1 nLNsLocked=0
    2009-05-06 08:42:58:098:CDT INFO CleanerRun 56 on file 0x3a begins backlog=3
    2009-05-06 08:42:59:261:CDT SEVERE CleanerRun 56 on file 0x3a invokedFromDaemon=false finished=true fileDeleted=false nEntriesRead=204867 nINsObsolete=6270 nINsCleaned=0 nINsDead=0 nINsMigrated=0 nLNsObsolete=198586 nLNsCleaned=0 nLNsDead=0 nLNsMigrated=0 nLNsMarked=0 nLNQueueHits=0 nLNsLocked=0
    2009-05-06 08:42:59:262:CDT INFO CleanerRun 57 on file 0x36 begins backlog=2
    2009-05-06 08:43:02:185:CDT SEVERE CleanerRun 57 on file 0x36 invokedFromDaemon=false finished=true fileDeleted=false nEntriesRead=206158 nINsObsolete=6359 nINsCleaned=0 nINsDead=0 nINsMigrated=0 nLNsObsolete=199786 nLNsCleaned=0 nLNsDead=0 nLNsMigrated=0 nLNsMarked=0 nLNQueueHits=0 nLNsLocked=0
    2009-05-06 08:43:02:186:CDT INFO CleanerRun 58 on file 0x37 begins backlog=2
    2009-05-06 08:43:03:243:CDT SEVERE CleanerRun 58 on file 0x37 invokedFromDaemon=false finished=true fileDeleted=false nEntriesRead=206160 nINsObsolete=6331 nINsCleaned=0 nINsDead=0 nINsMigrated=0 nLNsObsolete=199817 nLNsCleaned=0 nLNsDead=0 nLNsMigrated=0 nLNsMarked=0 nLNQueueHits=0 nLNsLocked=0
    2009-05-06 08:43:03:244:CDT INFO CleanerRun 59 on file 0x3b begins backlog=1
    2009-05-06 08:43:04:000:CDT SEVERE CleanerRun 59 on file 0x3b invokedFromDaemon=false finished=true fileDeleted=false nEntriesRead=206576 nINsObsolete=6385 nINsCleaned=0 nINsDead=0 nINsMigrated=0 nLNsObsolete=200179 nLNsCleaned=0 nLNsDead=0 nLNsMigrated=0 nLNsMarked=0 nLNQueueHits=0 nLNsLocked=0
    2009-05-06 08:43:04:001:CDT INFO CleanerRun 60 on file 0x38 begins backlog=0
    2009-05-06 08:43:08:180:CDT SEVERE CleanerRun 60 on file 0x38 invokedFromDaemon=false finished=true fileDeleted=false nEntriesRead=205460 nINsObsolete=6324 nINsCleaned=0 nINsDead=0 nINsMigrated=0 nLNsObsolete=194125 nLNsCleaned=4999 nLNsDead=0 nLNsMigrated=0 nLNsMarked=0 nLNQueueHits=0 nLNsLocked=4999
    2009-05-06 08:43:08:224:CDT INFO CleanerRun 61 on file 0x3c begins backlog=0
    2009-05-06 08:43:09:099:CDT SEVERE CleanerRun 61 on file 0x3c invokedFromDaemon=false finished=true fileDeleted=false nEntriesRead=206589 nINsObsolete=6343 nINsCleaned=0 nINsDead=0 nINsMigrated=0 nLNsObsolete=200235 nLNsCleaned=0 nLNsDead=0 nLNsMigrated=0 nLNsMarked=0 nLNQueueHits=0 nLNsLocked=0
    2009-05-06 08:43:24:548:CDT CONFIG Checkpoint 964: source=api success=true nFullINFlushThisRun=12 nDeltaINFlushThisRun=0
    I could not see anything fundamentally different between the log messages when log files were removed and when they were not. The DbSpace utility confirmed that there are plenty of log files under the minimum utilization, so I can't quite explain while the log file removal stopped all of a sudden.
    Any help would be appreciated (JE version: 3.3.75).

    Hi Bertold,
    My first guess is that one or more transactions have accidentally not been ended (committed or aborted), or cursors not closed.
    A clue is the nLNsLocked=4999 in the second set of trace messages. This means that 4999 records were locked by your application and were unable to be migrated by the cleaner. The cleaner will wait until these record locks are released before deleting any log files. Records locks are held by transactions and cursors.
    If this doesn't ring a bell and you need to look further, one thing you can do is print the EnvironmentStats periodically (System.out.println(Environment.getStats(null))). Take a look at the nPendingLNsProcessed and nPendingLNsLocked. The former is the number of records the cleaner attempts to migrate because they were locked earlier. The latter is the number that are still locked and cannot be migrated.
    --mark                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • Photoshop CS2: "file not compatible with this version of Photoshop" error

    So, I've been working with Photoshop for almost 20 years now, and lately I've been getting this error message on occasion (but not on every file) when I go to open a file I worked on just yesterday: "Could not complete your request because the file is not compatible with this version of Photoshop." I just worked on it yesterday in Photoshop. The file was saved as a PSD, and when I attempt to open it through Painter IX, that program tells me that it's not a Photoshop document. Why can't I open this file anymore, and why is it giving me this error message when I don't have Norton AntiVirus installed, and my 'maximize PSD and PSB file compatibility' is set to 'always'??
    Does anyone have an idea on how I can open my file? How can I get around this, and how do I prevent it from happening again?
    OS: OSX 10.4.11
    Photoshop CS2
    Info:
    Kind: Adobe Photoshop file
    Size: 394.4MB
    Created: December 13, 2007
    Modified: Yesterday at 3:54 PM

    This is the boilerplate text I use in connection to saving to a network (please NOTE the part where it explains that normally, it does work, but that it is impossible to troubleshoot someone else's network remotely, and that's why it's not supported by Adobe):
    If you are opening files over a network or saving them to a network server, please
    cease and desist immediately
    in the event you are currently experiencing problems with one or more files.
    Working across a network is not supported.
    See:
    http://www.adobe.com/support/techdocs/322391.html
    Copy the
    CLOSED file from your server to your local hard disk, work on it, save it again to your local hard disk, close it, and copy the closed file back to the server.
    Of course, the fact that Adobe does not support working across a network does not necessarily mean it won't work. It should.
    Adobe's position is that there are too many variables in a network environment for them to guarantee that everything will work correctly in every network, especially given the fact that if something does
    not work properly, it's probably the network's fault, and Adobe has no way of troubleshooting your network.
    If you can't work locally, you are on your own, and if something happens, you're on your own. If you must work from a server, make sure your network administrator is a competent professional.
    When problems arise, a lot of valuable work can be lost.

  • Error 1308.Source file not found with 9.4.2 Admin Install point

    I'm including as much information in this post as possible to help narrow down my problem, so if it's too wordy I appologize.
    I've created an Admin install point for Acrobat 9 patching it up to Acrobat 9.4.2 using the following commands in a batch file:
    D:
    cd \Adobe\Acrobat\AcrobatPro9
    md \Adobe\Acrobat\AcrobatPro9AIP
    start /wait msiexec /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP /Liv D:\Adobe\Acrobat\AcrobatPro9AIP\install900.log /qn
    cd \Adobe\Acrobat\AcrobatPro9AIP
    start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcroProStdUpd910_T1T2_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install910.log /qn
    start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd912_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install912.log /qn
    start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd920_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install920.log /qn
    start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd930_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install930.log /qn
    start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd932_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install932.log /qn
    start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd933_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install933.log /qn
    start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd940_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install940.log /qn
    start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd941_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install941.log /qn
    start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd942_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install942.log /qn
    I rename the folder "AcrobatPro9AIP" to reflect the current version (e.g. "Acrobat9.4.2"), copy the folder to my DFS, create an MST with the Customization Wizard, and then deploy with Group Policy.
    Before I deploy I always run a few test installations on two Windows XP 32-bit machines, and two Windows 7 64-bit workstations. I've been using this method to build my install point for the last 5 Adobe patches without a problem, but suddenly with version 9.4.2 my test workstations pop up with the following error during the installation via the standard installation method "msiexec /i acropro.msi TRANSFORMS=acropro.mst":
    I built my installation package for acrobat9.4.1, 9.4.0 and 9.3.3 exactly the same way and the installations did not have this error. The file in question "Adobe.Acrobat.Dependencies.manifest" does not exist in my 9.4.1, or 9.4.0 package folders, nor does it exist in the 9.4.2 folder. Any suggestions?

    I am having the same problem, all the relevant info was already covered in the "thewaker" post above.   I too have made a script to make a Admin install with patches up to 9.4.2.  The script worked for 9.3.3 but when I remade the AdobeAIP for 9.4.2, I too got this error when installing it, even manually.  (Error 1308.Source file not found.  Adobe.Acrobat.Dependencies.manifest ) Running on Windows 7 32bit.
    Here is my Script.
    C:
    cd\AcroBatPro9
    md \AcrobatPro9AIP
    start /wait msiexec /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP /Liv c:\AcrobatPro9AIP\install900.log /qn
    cd \AcrobatPro9AIP
    start /wait msiexec /p c:\AcrobatPro9\AcroProStdUpd910_T1T2_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install910.log /qn
    start /wait msiexec /p c:\AcrobatPro9\AcrobatUpd912_all_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install912.log /qn
    start /wait msiexec /p c:\AcrobatPro9\AcrobatUpd920_all_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install920.log /qn
    start /wait msiexec /p c:\AcrobatPro9\AcrobatUpd930_all_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install930.log /qn
    start /wait msiexec /p c:\AcrobatPro9\AcrobatUpd932_all_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install932.log /qn
    start /wait msiexec /p c:\AcrobatPro9\AcrobatUpd933_all_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install933.log /qn
    start /wait msiexec /p c:\AcrobatPro9\AcrobatUpd940_all_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install940.log /qn
    start /wait msiexec /p c:\AcrobatPro9\AcrobatUpd942_all_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install942.log /qn
    I did notice though that the "thewaker" has added AcrobatUpd941_all_incr.msp to his script, which is a security update. Which may be "a" problem, but I don’t think this is related to the problem we are having.
    Administrative deployment
    Administration Installation Point (AIP) deployments must not apply a quarterly update AIP in which a security update was the most recently applied update. Because a quarterly update includes the changes implemented in all recent security updates, the quarterly update forcibly bypasses those updates entirely. To deploy a quarterly update from an AIP, create a AIP which includes only quarterly updates as follows:
        Acceptable:      Acrobat 9.0.0 -> 9.1.0 (Quarterly) -> 9.1.2 (Quarterly) -> 9.2.0 (Quarterly) -> 9.3.0 (Quarterly) -> 9.3.2 (Quarterly) -> 9.3.3 (Quarterly) ->  9.4.0 (Quarterly) -> 9.4.1 (Security)
        Acceptable:      Acrobat 9.0.0 -> 9.1.0 (Quarterly) -> 9.1.2 (Quarterly) -> 9.2.0 (Quarterly) -> 9.3.0 (Quarterly) -> 9.3.2 (Quarterly) -> 9.3.3 (Quarterly) -> 9.4.0 (Quarterly) -> 9.4.2 (Quarterly)
        Unacceptable:  Acrobat 9.0.0 -> 9.1.0 (Quarterly) -> 9.1.2 (Quarterly) -> 9.2.0 (Quarterly) -> 9.3.0 (Quarterly) -> 9.3.2 (Quarterly) -> 9.3.3 (Quarterly) -> 9.4.0 (Quarterly) -> 9.4.1 (Security) -> 9.4.2 (Quarterly)
    Anyway.. Any help with this would be helpful as I would like to deploy it soon.
    Thanks.

  • CS6 file "not compatible with this version of Photoshop"

    We are using Adobe Creative Suit 6. Yesterday i've created a file, and today i cannot open it with any software. (Bridge shows the thumbnail but the file is corrupted.) I get the "Could not complete your request because the file is not compatible with this version of Photoshop" error. The file contains multiple layers, without any masks. Originally it was a NEF file (Nikon raw). I used vanishing point, because its an interior photo. (it doesnt relevant for the problem) I have an earlier version, where the vanishing points are defined, but the textures are missing. Main question is, how this can be??? I worked on that version for more than 2 hours. The file size is small, it's only 133.579.959 bytes (133 Mb). The image is 4288 x 2848 px, 240 DPI, RGB 8-Bit, Fogra39 ICC profile. The computer is up to date, nor the hw or the softwares are corrupted. The file saved locally, so it's not a network problem. I saved the document, and left the machine for about 15 minutes, then i went back, so the save had to be complete. (on SSD it took about a couple of secs) The biggest problem is, i have to work with a large amount of photos in Photoshop. But after this i have some bad feelings about this job. We have to create these PSD files both for ourselves and for our client for further use. (It's a huge furniture factory) The hardware has 16 gigs of RAM with an Intel i5 operating system Windows 8.1. Any ideas? (ps.: i didnt' find PSErrorlog.txt file) Oh i almost forgot. After installing CS6 my Adobe Acrobat Pro stopped working in about 2 weeks... So. The job is waiting, but we cannot wait for a long time, we gonna loose our biggest client because of a sw error?

    You write this is not compatible with this version. Did you install all updates and did you update the camera raw too?

  • CS3 file not compatible with Photoshop CS4?

    My son uses Photoshop CS3 at college. He worked all day on an image (120MB), and saved it on a USB stick. When opening at home with Photoshop CS4, the "Reading Photoshop format" appears, then an error message "Could not complete your request because the file is not compatible with this version of Photoshop."
    He has been burned before by a USB stick, but all the other files seem OK.
    Is there a solution to this?

    ^First thing I did was make a copy.
    QuickTime Picture Viewer (which seems to open other PSD files) says it is corrupted.
    Adobe Bridge can read the metadata, gives no preview, and won't open the file.
    Any other thoughts?

  • File Not Compatible With This Version

    I opened and created various files today, and after saving and trying to reopen I get this error:
    "Could not complete your request because the file is not compatible with this version of Photoshop."
    One of the same files opened just fine earlier, and after opening and making small changes to adjustment layers and resaving, I encountered this error.
    I did some searching, and all the causes seem to be related to using large files, Network Storage and Norton Anti-Virus. However, my files are under 2 gb, created locally (not on a Network Drive) on a machine that does NOT have Norton Anti-Virus. Hard drive was replaced on this machine in the last 3 weeks, so it's unlikely that there's an issue with that.
    Any other possible explanations? All of the posts I've seen on this topic seem to be related to Smart Object and/or Placed Photo/Video layers. Perhaps it is a Photoshop glitch related to certain types of Smart Objects / Placed Photo/Video layers?
    Running:
    MacBook Pro Mid-2010
    Mac OS X 10.6.4
    Adobe Photoshop CS5 Extended Version 12.0.1
    8 gb RAM
    341 gb free space
    Intel HD Graphics & NVIDIA GeForce GT 330M
    Thanks!

    What you can try..
    Create a blank doucument in photoshop .
    Try to place the file on that by Goint to File -> Place .
    It works if its not a multi layered  file.
    - Vishal

  • Server has not enough memory for operation (Some .rpt files not removing from Temp folder )

    We have web application developed in ASP.NET 4.0 ftramework and published on IIS. And we are using 13_0_8 version of CR.
    I am creating report files and exporting these as pdf. And I am disposing streams and report documents at the end. Initially, there wasn't any problem and temporary files which are created by CrystalReport were deleting all. But, now requests to the web application increeased to about 50.000 in a day and now some .rpt files are staying in Temp folder and I can't delete them. After recycling application pool all files are removed by IIS. Then, after 1 or 2 hours new .rpt files are creating in Temp folder. And after somewhile, application throws Server has not enough memory for operation. And, IMHO the reason is temp files. Here is the code I am using to export report as pdf.
    Questions:
    1. Is the reason of this exception is temp files in Temp folder?
    2. What is wrong in that code?
    ReportDocument report = DownloadPDF.GetReport(id);
       MemoryStream stream = (MemoryStream)report.ExportToStream(CrystalDecisions.Shared.ExportFormatType.PortableDocFormat);
       Response.ContentType = "application/pdf";
       Response.AddHeader("content-disposition", "attachment; filename=" + id+ ".pdf");
      report.Close();
      report.Dispose();
       try
       Response.BinaryWrite(stream.ToArray());
       Response.End();
       catch (Exception)
       finally
      stream.Flush();
      stream.Close();
      stream.Dispose();
    Here is the StackTrace

    Hi Farhad
    At 50,000 requests, you are more than likely running into the CR engine limit. E.g.; you're pushing way too hard... The following will be good reads for you:
    Crystal Reports 2008 Component Engine Scalability | SCN
    (The above doc does apply to current versions of CR - e.g.; no changes.)
    Crystal Reports Maximum Report Processing Jobs ... | SCN
    Scaling Crystal Reports for Visual Studio .NET
    Choosing the Right Business Objects SDK for Your Needs
    Choose the Right SDK for the Right Task
    How Can I Optimize Scalability?
    All of the above apply to your version of CR and thus the next question will be; how to proceed:
    1) Bigger, faster servers will not hurt.
    2) Web farms.
    How Do I Use Crystal Reports in a Web Farm or Web Garden?
    3) Crystal Reports Application Server, or perhaps even SAP BusinessObjects BI Platform 4.1
    Crystal Enterprise Report Application Server - Overview
    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada
    Follow us on Twitter

  • Files not created with iTunes do not play from remote iTunes library

    I hve ripped a large part of my CD collection into music files into FLAC format. I have since converted my music files from FLAC into Apple Lossless Audio Codec (ALAC) format and imprted them into iTunes.
    The files play with no problem on iTunes if they are on a local iTunes library. Furthermore, all metadata such as tags and album cover art information are properly displayed in iTunes. This is true whether I'm running iTunes on a Windows XP box or a Mac OS X box. I have since imported many other CDs into my iTunes library using iTunes to encode into ALAC.
    If I share the iTunes library on my Windows XP machine to iTunes running on a Mac OS X box or to an Apple TV, I can:
    *play songs that were imported directly using iTunes
    *not play any songs that were not created with iTunes
    This behavior is true whether I'm trying to play them from either a Mac or from an Apple TV.
    If I copy the *.m4a files to the Mac and import them to the iTunes library I have no problems playing them on the Mac. I have not tried sharing the iTunes library on the Mac and tried accessing the files from the Apple TV or the Windows PC.
    Any thoughts?

    Fix: optimize m4a files moving the meta data to the beginning, whilst optionally creating a hint track (used for streaming m4a over Apple Airtunes).
    see: http://www.dbpoweramp.com/codec-central-m4a.htm

  • File not compatible with the version of windows

    Already downloaded the file but when I install it says that the file is not compatible with the version of windows. But my PC is windows 7, 64bit

    I dowload from several different sites and all give the same message. from the adobe site too.

  • Bulk save as psd file not saved with Maximize Compatibility selected in preference

    I want to do a "bulk save as" for psd files that were not saved with Maximize File Compatibility selected in Preferences. I'm trying to import those files into LR5 but I get an error message. Or is there a work around for resolving this issue? I have both PS CS6 and PS CC. Also Bridge for both. I've just subscribed to LR5.

    LR does not support Layers, PSD files may have layers so you may have a problem using LR to do what you want to do.
    Set your Photoshop Preferences to always save with Max Compatibility.
    Record a save action one step menu File>save.
    Then use Adobe Bridge menu Edit>Find to find all your PSD files.
    Then select all and use menu Tools>Photoshop>Batch  and if your lucky and don't catch an Adobe Bug Photoshop will start and the Batch dialog will open,  You can the set the Save Action Set and the Save Action  all the PSD selected in the Bridge should open and saved.
    I cancelled the search short here the search for all psd files could take a very long time and did not run the batch.
    You will have a better chance not catching an Adobe bug if Photoshop is not up and running when you use the here.  Bridge may try to start a different version of Photoshop then the one running when you use menu tools>Photoshop>Batch.  Bridge CC was updated to start CC 2014 there is no bridge CC 2014.
    This site scale image poorly you can scale them if you view them in a new tab or window.

  • How do you burn a video file not compatible with quicktime?

    Hello all,
    I am very new at this so I apologize if the solution is very simple - i just can't seem to work this iDVD thing...
    I've searched through the forums and can't seem to find exactly what I need, please point me in the right direction if a solution has already been posted elsewhere.
    Okay, so my problem is trying to burn movies to DVD. I don't actually have to use iDVD, but it's the only solution i've come up with. My problem is when I add a movie file (lets say, something that will ONLY OPEN with VLC), and press preview, no movie files show up... but when i put in a video file that will play with quicktime, the preview works fine.
    So i suspect the preview wont play because the file is not compatible with quicktime.
    have any of you tried this? All i want is to be able to play a downloaded movie on the dvd player downstairs
    regards,
    Peter

    iDvd is not a general burn utility. However, there's a very good chance (whatever that file is) that Toast will burn it to Dvd-R. And if not (which is unlikely) then do as suggested already and use Mpegstream Clip. It's 100% free! However Mpeg 2 playback component may run you a few bucks (if needed).
    Or the alternative is to invest hundreds of dollars in Apple software and use apps like FCP and DVDSP (or FCS) along with QT Pro. Nine times out of ten this combination tends to work well ... but it ain't cheap (not to mention a rather steep learning curve).
    Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software / products that may be mentioned in this topic. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information above at your own discretion.
    Message was edited by: SDMacuser

Maybe you are looking for

  • Photosmart c310 not printing or copying color

    hi, my photosmart c310 is not printing color even though settings are correct on computer and cartridges are full. i tried to photocopy a color doc and it wouldn't even copy in color. I don't know hwere to look to fix. thanks

  • DMS Attachments & IH01 Search

    Hello, We have a few external documents (word/pdf/etc.) that are linked to functional locations and equipment records. If I am in the IH01 Structure and I highlight the top most superior functional location and then use the menu path Environment -> D

  • Extract to multiple BW systems

    Is it possible to extract Sales Data (order and billing documents) to both a BW 3.1 and a BI 7.0 system at the same time? does anyone have any links to how this can be done?

  • The class or interface 'MouseEvent' could not be loaded

    I am creating a swf file that would get populated with images and text taken entirely from an XML file from the local folder. All i need to do now is manouver between the images using a click of a button. Say there are some images lined up one below

  • Depreciation run from the posting date

    Hi Team My client want deprecition to be posted from the Posting date instead of start date of the document period he is trying to  post assets through F -90 it calculates depreciation from the start date of the doc. period Eg., Asset no 8000000049 D