Fill spilling out of selection in Illustrator CC

Hey,
I recently upgraded from Illustrator CS5 to CC and have run into this problem. The screenshot shows what happens when I draw a square on the canvas. The fill seems to spill outside of the selection. This happens on new objects I make as well as old documents I open.
Can anyone tell me what I need to do to change this?

Thanks for the help but after doing what you recommended it didn't really have much effect. I did however open a new document and created an object which looks fine (this was after aligning to grid and artboard). But when I open the transform panel is shows that it is 239,5 px on the Y axis. How can this be when I have snap to pixel activated?

Similar Messages

Filling in the Colors of an Illustration Efficiently

I have the following illustration:
What I need to do is fill in certain aspects of this illustration with different colors. For instance, I might need to change the color of the hair, or the shirt or the jacket. Currently the way I've been doing this is by using live paint. The only problem with this is that when using Live Paint, it nearly doubles the size of the file and also adds about twice the amount of paths. For what I'm trying to do, it's extremely important to me that I keep the file size and the amount of paths at a bare minimum. I've tried using paths -> simplify after using Live Paint, and the problem with this is it skews the illustration a little, and also puts some "holes" in it (ie the dead spaces I was referring to in my other thread).
Ultimately, what I'd like to be able to do is just select the path for a certain area of the drawing and fill it. However, there isn't always a neat path for the part of the drawing I want to fill. What I'm wondering is, what is the best way to go about separate the one ginormous path that engulfs much of the illustration into some other smaller paths that I can fill. Or in general, can anyone think of a better way to go about doing this so I get the most efficient illustration possible?
For your reference, here is the svg version of the file: https://sendnow.acrobat.com/?i=0HBJVDJKKp*sXdjhyzeV3A
Thanks,
KiSS

However, there isn't always a neat path for the part of the drawing I want to fill.
Then you have to create one.
...what is the best way to go about separate the one ginormous path that engulfs much of the illustration into some other smaller paths that I can fill....
That's essentially what LivePaint does. It creates new paths in the shapes of areas that are merely visually enclosed by portions of existing paths. When it does this "flood fill" behaviour, it creates additional closed paths with fills.
If the area that you want to flood fill is too large, or has gaps that let the flood fill bleed out to areas you don't want it to, you can control that by drawing additional, temporary paths (for example, across the bottom) to "contain" or "limit" the areas of flood fill.
Or in general, can anyone think of a better way to go about doing this so I get the most efficient illustration possible?
Sure. Understand that you don't get something (elegant, efficient results) for nothing (sloppy drawing with over-automated instant-gratification features). Learn to draw with the Pen tool, placing and modifying anchor points deliberately; drawing optimal paths to begin with instead of drawing paths that merely look like they enclose the right areas by dragging things like the Brush or Pencil tool.
...when I try to join the line to that anchor point, it's giving me the "to join, you must select two open..."
If you're using LivePaint, you don't have to join the paths to contain the flood fill if you're relying on LivePaint to automatically detect and trace around the new visually-enclosed areas.
When you do want to join paths (as when drawing/constructing paths deliberately), you don't have to select endpoints to join paths. You can just select the paths with the black pointer and invoke the Join command. The joins will occur at the nearest ends. You can do the same thing to close a single open path.
If the ends where you want the joins to occur are not the nearest ends, you can, again, draw a temporary path to cause the desired ends to be the nearest, and then delete/modify unwanted anchors/segments thereafter.
Your stated goal here is to get optimal paths. You just don't get that by using the loosey-goosey, artsy-tartsy "painterly" features (Pen, Pencil, LivePaint, autotracing, etc., etc.) You get it by learning how to draw Bezier paths deliberately and accurately.
JET

I recently upgraded my Mac to Yosemite and I can't use the custom function (grayed out) in Image Trace Illustrator CS6 (physical version). Anyone else having this issue?

I recently upgraded my Mac to Yosemite and I can't use the custom function (grayed out) in Image Trace Illustrator CS6 (physical version). Anyone else having this issue?

Custom will show automatically as soon as you just edit some options. So just go ahead, you don't need to select "custom"

Having troble editing forms after I have filled them out I Adobe9

I have downloaded a form from the Internet and filled it out. Subsequently I needed to make a correction to the form. I position the add text cursor over, near, around... the text to be edited without success. I have cheked the page has not been secured in any way. Any suggestions from the Forum members?

Alternatives for Help Resetting Security Questions and Rescue Mail
     1. Apple ID- All about Apple ID security questions.
     2. Rescue email address and how to reset Apple ID security questions
     3. Apple ID- Contacting Apple for help with Apple ID account security.
     4. Fill out and submit this form. Select the topic, Account Security.
     5. Call Apple Customer Service: Contacting Apple for support in your
          country and ask to speak to Account Security.
How to Manage your Apple ID: Manage My Apple ID

How to find out the selected column in Table Control

Hi all,
      How to find out the selected column in Table Control?
Thanks & Regards,
YJR

Hi,
Let your table control name in Screen painter be TC1.
READ TABLE TC1-COLS INTO WA_COLS (some wok area)
             WITH KEY SELECTED = 'X'.
        IF SY-SUBRC = 0.
          CLEAR: W_DUMMY, W_COL_NAME.
          SPLIT WA_COLS-SCREEN-NAME AT '-' INTO W_DUMMY
                                               W_COL_NAME.
        endif.
W_COL_NAME gives you the column name.
Hope it helps.
cheers
sharmistha

ICal's month view events are spilling out and overlapping making unreadable

iCal's month view events are spilling out of their day boxes and overlapping the events below them making it impossible to look at the month view and discern one's schedule.
What's really odd is it only seems really a problem with the current month. January 2009.
What can I do to remedy this situation?

Okay, I figured out a simple remedy that was probably always intended by Apple. I had been pasting long text paragraphs from emails into the 'Subject' Header. When I paste the long paragraph of information in the "NOTES" area at the bottom of the dialogue box and just put a brief subject line in the header area this fixes the problem.
This might seem like common sense, but Palm Desktop did not require this. I figured this out by trying Entourage. Entourage synching with the iPhone however works through iCal and deleted all my color coded Calendars that I had not backed up. In Palm Desktop I had 15 categories each with a color code.
Now, when I put an address into the "Location" window why can't I tap that on the iPhone Calendar and have the GPS/Googlemap display this location on a map?

How to find out the selected line in list

Hi all,
Can any one tell me how to find out the selected event in the list

Your subject said 'selected <b>line</b> in list' and your description says 'selected <b>event</b> in the list'. Which one is it you want to know?
For line you will use the event AT LINE-SELECTION and for event you will use AT USER-COMMAND.
Please reward and close if answered, if not, please revert back to the forum with more details.
Thanks,
Srinivas

Adobe Acrobat form created and emailed but recipient cannot save the form in reader after filling it out

When I purchased Acrobat today, the Adobe sales rep told me I could create fill-in forms that I could email to others, who could fill them out using Adobe Reader. When the recipient tried to save the completed form, he was unable to save it to his computer, only able to print. Is this correct, or is there a step we are unaware of? He owns Adobe Acrobat Pro 9, but I'm using Acrobat 11 (purchased it today). Acrobat Pro 9 cannot open the forms I sent... now we are stuck.
Solutions?

Hi DMOliver,
Please try saving the form as 'Reader Extended' and check.
Regards,
Rave

How do I put a fillable form on our website so people can fill it out and send back to me

How do I put a fillable form on our website so people can fill it out and get it back to me.

Hi;
This is a bit of a broad question, let me try to understand your needs a little better.
Are you looking to use FormsCentral to either create your form or create the form and collect and manage the responses? Are you looking for a web/HTML form or a PDF?
FormsCentral allows you to create web/html forms that when they are submitted the data is sent to FormsCentral and in a Paid level subscription you can configure Email Notifications to email the results to you, they are also always available in FormsCentral to view and analyze. For the web/HTML form you can simply add a link to the form on your website, or the web/HTML form can also be "Embedded" into your web site (there is Embed code on the Distribute tab).
FormsCentral can also create a PDF form, the PDF can either send the responses to FormsCentral like the web form with the same options (Notifications etc), and can also be a PDF form without a "Submit" button where you can then add a Submit button of your own that would email the responses to you. This requires having Adobe Acrobat to edit the form and add your own Submit button.
If you do use PDF see this FAQ on PDF in the web - we do not recommend "embedding" the PDF into your web page, do not have the PDF open in the browser, the users should download the PDF and fill it out using the Free Adobe Reader: http://forums.adobe.com/docs/DOC-4142
Thanks,
Josh

After upgrade to v26.0 - text in textarea boxes is spilling out onto the page

After upgrading to version 26.0 - I'm on windows XP, all the text in textarea boxes spills out of the box and onto the page. Text-wrapping is turned off.
It consistently happens like this: I load up a page with a textarea box that contains a lot of text in it. Textwrapping is off. At first everything looks fine. Then about 3-5 seconds later, the text spills onto the scrollbars, then another 2-3 seconds later it spills out onto the page. Sometimes in both directions, usually spills to the right.
Resizing the browser window makes no difference.
Using the scroll bars in the textarea also makes no difference.
I've uploaded a screen shot of the problem here:
http://studiox.com/loremipsum.jpg
thanks for any recommendations and help you can provide

Is it preformatted text? In that case, of course, the overflow should be hidden and not pour out of the Firefox window.
When the display goes haywire, I first suspect a graphics card driver incompatibility. Sometimes this will be triggered by a change in Firefox, while in other cases, it may result from a driver or OS update. Try disabling Firefox's use of hardware acceleration for graphics as a workaround.
orange Firefox button (or Tools menu) > Options > Advanced
On the "General" mini-tab, uncheck the box for "Use hardware acceleration when available"
This will take effect after you restart Firefox. Any difference?

How to find out the selected item in the lsit

Hi all,
How to find out the selected item in the list,can any please post some examples which easy to understand,because iam not a good programmer

This sample program uses a checkbox as selection, you could also use a HOTSPOT.
report zrich_0002 no standard page heading.
data: imara type table of mara with header line.
data: check_box(1) type c,
   report_lines type i.
start-of-selection.
* Create the gui status with BACK button in standard place
* and a READ button in the application toolbar
set pf-status 'CHECK'.
select * into corresponding fields of table imara           from mara up to 100 rows.
loop at imara.
write:/ check_box as checkbox, imara-matnr, imara-matkl.
hide imara-matnr.
endloop.
report_lines = sy-linno - 1.
top-of-page.
write: 'List of materials'. uline.
top-of-page during line-selection. write: 'Material.....'. uline.
at user-command.
case sy-ucomm.
when 'READ'.
check_box = space.
set pf-status 'CHECK' excluding 'READ'.
      do report_lines times.
read line sy-index field value check_box.
   if check_box = 'X'.
write:/ 'You have selected material',
imara-matnr.
endif.
enddo.
endcase.
Regards,
Rich Heilman

How to do outer join select query for an APEX report

Hello everyone,
I am Ann.
I have one select statement that calculate the statistics for one month(October 2012 in this example)
select ph.phase_number
, sum ( (case
WHEN ph.date_finished IS NULL OR ph.date_finished > last_day(TO_DATE('Oct 2012','MON YYYY'))
THEN last_day(TO_DATE('Oct 2012','MON YYYY'))
ELSE ph.date_finished
END )
- ph.date_started + 1) / count(def.def_id) as avg_days
from phase_membership ph
inner join court_engagement ce on ph.mpm_eng_id = ce.engagement_id
inner join defendant def on ce.defendant_id = def.def_id
where def.active = 1
and ph.date_started <= last_day(TO_DATE('Oct 2012','MON YYYY'))
and ph.active = 1
and UPPER(ce.court_name) LIKE '%'
group by rollup(phase_number)
Result is as below
Phase_Number     AVG_DAYS
Phase One     8.6666666666666667
Phase Two     14.6
Phase Three     12
     11.4615365
I have other select list mainly list the months between two date value.
select to_char(which_month, 'MON YYYY') as display_month
from (
select add_months(to_date('Aug 2012','MON YYYY'), rownum-1) which_month
from all_objects
where
rownum <= months_between(to_date('Oct 2012','MON YYYY'), add_months(to_date('Aug 2012','MON YYYY'), -1))
order by which_month )
Query result is as below
DISPLAY_MONTH
AUG 2012
SEP 2012
OCT 2012
Is there any way that I can join these two select statement above to generate a result like:
Month          Phase Number     Avg days
Aug 2012     Phase One     8.666
Sep 2012     Phase One     7.66
Oct 2012     Phase One     5.66
Aug 2012     Phase Two     8.666
Sep 2012     Phase Two     7.66
Oct 2012     Phase Two     5.66
Aug 2012     Phase Three     8.666
Sep 2012     Phase Three     7.66
Oct 2012     Phase Three     5.66
Or
Month          Phase Number     Avg days
Aug 2012     Phase One     8.666
Aug 2012     Phase Two     7.66
Aug 2012     Phase Three     5.66
Sep 2012     Phase One     8.666
Sep 2012     Phase Two     7.66
Sep 2012     Phase Three     5.66
Oct 2012     Phase One     8.666
Oct 2012     Phase Two     7.66
Oct 2012     Phase Three     5.66
And it can be order by either Phase Number or Month.
My other colleague suggest I should use an left outer join but after trying so many ways, I am still stuck.
One of the select I tried is
select a.display_month,b.* from (
select to_char(which_month, 'MON YYYY') as display_month
from (
select add_months(to_date('Aug 2012','MON YYYY'), rownum-1) which_month
from all_objects
where
rownum <= months_between(to_date('Oct 2012','MON YYYY'), add_months(to_date('Aug 2012','MON YYYY'), -1))
order by which_month )) a left outer join
( select to_char(ph.date_finished,'MON YYYY') as join_month, ph.phase_number
, sum ( (case
WHEN ph.date_finished IS NULL OR ph.date_finished > last_day(TO_DATE(a.display_month,'MON YYYY'))
THEN last_day(TO_DATE(a.display_month,'MON YYYY'))
ELSE ph.date_finished
END )
- ph.date_started + 1) / count(def.def_id) as avg_days
from phase_membership ph
inner join court_engagement ce on ph.mpm_eng_id = ce.engagement_id
inner join defendant def on ce.defendant_id = def.def_id
where def.active = 1
and ph.date_started <= last_day(TO_DATE(a.display_month,'MON YYYY'))
and ph.active = 1
and UPPER(ce.court_name) LIKE '%'
group by to_char(ph.date_finished,'MON YYYY') , rollup(phase_number)) b
on a.display_month = b.join_month
but then I get an error
SQL Error: ORA-00904: "A"."DISPLAY_MONTH": invalid identifier
I need to display a report on APEX with option for people to download at least CSV format.
I already have 1 inteactive report in the page, so don’t think can add another interactive report without using the iframe trick.
If any of you have any ideas, please help.
Thanks a lot.
Ann

First of all, a huge thanks for following this Frank.
I have just started working here, I think the Oracle version is 11g, but not sure.
To run Oracle APEX version 4, I think they must have at least 10g R2.
This report is a bit challenging for me.I has never worked with PARTITION before.
About the select query you suggested, I run , and it seems working fine, but if I try this,
it return error ORA-01843: not a valid month
DEFINE startmonth = "Aug 2012";
DEFINE endmonth   = "Oct 2012";
WITH     all_months     AS
     select add_months(to_date('&startmonth','MON YYYY'), rownum-1) AS which_month
     ,      add_months(to_date('&startmonth','MON YYYY'), rownum ) AS next_month
     from all_objects
     where
     rownum <= months_between(to_date('&endmonth','MON YYYY'), add_months(to_date('&startmonth','MON YYYY'), -1))
select TO_CHAR (am.which_month, 'Mon YYYY')     AS month
,      ph.phase_number
, sum ( (case
WHEN ph.date_finished IS NULL OR ph.date_finished > last_day(TO_DATE(am.which_month,'MON YYYY'))
THEN last_day(TO_DATE(am.which_month,'MON YYYY'))
ELSE ph.date_finished
END )
- ph.date_started + 1) / count(def.def_id) as avg_days
FROM           all_months         am
LEFT OUTER JOIN phase_membership ph PARTITION BY (ph.phase_number)
                                    ON am.which_month <= ph.date_started
                           AND am.next_month > ph.date_started
                           AND ph.date_started <= last_day(TO_DATE(am.which_month,'MON YYYY')) -- May not be needed
                           AND ph.active = 1
LEFT OUTER join court_engagement ce on ph.mpm_eng_id = ce.engagement_id
                                    and ce.court_name IS NOT NULL -- or something involving LIKE
LEFT OUTER join defendant         def on ce.defendant_id = def.def_id
                                    AND def.active = 1
group by rollup(phase_number, am.which_month)
ORDER BY am.which_month
,            ph.phase_number
;Here is the shorted versions of the three tables:
A_DEFENDANT, A_ENGAGEMENT, A_PHASE_MEMBERSHIP
CREATE TABLE "A_DEFENDANT"
    "DEF_ID"     NUMBER NOT NULL ENABLE,
    "FIRST_NAME" VARCHAR2(50 BYTE),
    "SURNAME"    VARCHAR2(20 BYTE) NOT NULL ENABLE,
    "DOB" DATE NOT NULL ENABLE,
    "ACTIVE" NUMBER(2,0) DEFAULT 1 NOT NULL ENABLE,
    CONSTRAINT "A_DEFENDANT_PK" PRIMARY KEY ("DEF_ID"))
Sample Data
Insert into A_DEFENDANT (DEF_ID,FIRST_NAME,SURNAME,DOB,ACTIVE) values (101,'Joe','Bloggs',to_date('12/12/99','DD/MM/RR'),1);
Insert into A_DEFENDANT (DEF_ID,FIRST_NAME,SURNAME,DOB,ACTIVE) values (102,'John','Smith',to_date('20/05/00','DD/MM/RR'),1);
Insert into A_DEFENDANT (DEF_ID,FIRST_NAME,SURNAME,DOB,ACTIVE) values (103,'Jane','Black',to_date('15/02/98','DD/MM/RR'),1);
Insert into A_DEFENDANT (DEF_ID,FIRST_NAME,SURNAME,DOB,ACTIVE) values (104,'Minnie','Mouse',to_date('13/12/88','DD/MM/RR'),0);
Insert into A_DEFENDANT (DEF_ID,FIRST_NAME,SURNAME,DOB,ACTIVE) values (105,'Daisy','Duck',to_date('05/08/00','DD/MM/RR'),1);
CREATE TABLE "A_ENGAGEMENT"
    "ENGAGEMENT_ID" NUMBER NOT NULL ENABLE,
    "COURT_NAME"    VARCHAR2(50 BYTE) NOT NULL ENABLE,
    "DATE_REFERRED" DATE,
    "DETERMINATION_HEARING_DATE" DATE,
    "DATE_JOINED_COURT" DATE,
    "DATE_TREATMENT_STARTED" DATE,
    "DATE_TERMINATED" DATE,
    "TERMINATION_TYPE" VARCHAR2(50 BYTE),
    "ACTIVE"           NUMBER(2,0) DEFAULT 1 NOT NULL ENABLE,
    "DEFENDANT_ID"     NUMBER,
    CONSTRAINT "A_ENGAGEMENT_PK" PRIMARY KEY ("ENGAGEMENT_ID"))
Insert into A_ENGAGEMENT (ENGAGEMENT_ID,COURT_NAME,DATE_REFERRED,DETERMINATION_HEARING_DATE,DATE_JOINED_COURT,DATE_TREATMENT_STARTED,DATE_TERMINATED,TERMINATION_TYPE,ACTIVE,DEFENDANT_ID) values (1,'AA',to_date('12/08/12','DD/MM/RR'),null,to_date('12/08/12','DD/MM/RR'),null,null,null,1,101);
Insert into A_ENGAGEMENT (ENGAGEMENT_ID,COURT_NAME,DATE_REFERRED,DETERMINATION_HEARING_DATE,DATE_JOINED_COURT,DATE_TREATMENT_STARTED,DATE_TERMINATED,TERMINATION_TYPE,ACTIVE,DEFENDANT_ID) values (2,'BB',to_date('01/09/12','DD/MM/RR'),null,to_date('02/09/12','DD/MM/RR'),null,null,null,1,102);
Insert into A_ENGAGEMENT (ENGAGEMENT_ID,COURT_NAME,DATE_REFERRED,DETERMINATION_HEARING_DATE,DATE_JOINED_COURT,DATE_TREATMENT_STARTED,DATE_TERMINATED,TERMINATION_TYPE,ACTIVE,DEFENDANT_ID) values (3,'AA',to_date('02/09/12','DD/MM/RR'),null,to_date('15/09/12','DD/MM/RR'),null,null,null,1,103);
Insert into A_ENGAGEMENT (ENGAGEMENT_ID,COURT_NAME,DATE_REFERRED,DETERMINATION_HEARING_DATE,DATE_JOINED_COURT,DATE_TREATMENT_STARTED,DATE_TERMINATED,TERMINATION_TYPE,ACTIVE,DEFENDANT_ID) values (4,'BB',to_date('01/10/12','DD/MM/RR'),null,to_date('02/10/12','DD/MM/RR'),null,null,null,1,105);
CREATE TABLE "A_PHASE_MEMBERSHIP"
    "MPM_ID"       NUMBER NOT NULL ENABLE,
    "MPM_ENG_ID"   NUMBER NOT NULL ENABLE,
    "PHASE_NUMBER" VARCHAR2(50 BYTE),
    "DATE_STARTED" DATE NOT NULL ENABLE,
    "DATE_FINISHED" DATE,
    "NOTES" VARCHAR2(2000 BYTE),
    "ACTIVE" NUMBER(2,0) DEFAULT 1 NOT NULL ENABLE,
    CONSTRAINT "A_PHASE_MEMBERSHIP_PK" PRIMARY KEY ("MPM_ID"))
Insert into A_PHASE_MEMBERSHIP (MPM_ID,MPM_ENG_ID,PHASE_NUMBER,DATE_STARTED,DATE_FINISHED,NOTES,ACTIVE) values (1,1,'PHASE ONE',to_date('15/09/12','DD/MM/RR'),to_date('20/09/12','DD/MM/RR'),null,1);
Insert into A_PHASE_MEMBERSHIP (MPM_ID,MPM_ENG_ID,PHASE_NUMBER,DATE_STARTED,DATE_FINISHED,NOTES,ACTIVE) values (2,1,'PHASE TWO',to_date('21/09/12','DD/MM/RR'),to_date('29/09/12','DD/MM/RR'),null,1);
Insert into A_PHASE_MEMBERSHIP (MPM_ID,MPM_ENG_ID,PHASE_NUMBER,DATE_STARTED,DATE_FINISHED,NOTES,ACTIVE) values (3,2,'PHASE ONE',to_date('12/09/12','DD/MM/RR'),null,null,1);
Insert into A_PHASE_MEMBERSHIP (MPM_ID,MPM_ENG_ID,PHASE_NUMBER,DATE_STARTED,DATE_FINISHED,NOTES,ACTIVE) values (4,3,'PHASE ONE',to_date('20/09/12','DD/MM/RR'),to_date('01/10/12','DD/MM/RR'),null,1);
Insert into A_PHASE_MEMBERSHIP (MPM_ID,MPM_ENG_ID,PHASE_NUMBER,DATE_STARTED,DATE_FINISHED,NOTES,ACTIVE) values (5,3,'PHASE TWO',to_date('02/10/12','DD/MM/RR'),to_date('15/10/12','DD/MM/RR'),null,1);
Insert into A_PHASE_MEMBERSHIP (MPM_ID,MPM_ENG_ID,PHASE_NUMBER,DATE_STARTED,DATE_FINISHED,NOTES,ACTIVE) values (6,4,'PHASE ONE',to_date('03/10/12','DD/MM/RR'),to_date('10/10/12','DD/MM/RR'),null,1);
Insert into A_PHASE_MEMBERSHIP (MPM_ID,MPM_ENG_ID,PHASE_NUMBER,DATE_STARTED,DATE_FINISHED,NOTES,ACTIVE) values (7,3,'PHASE THREE',to_date('17/10/12','DD/MM/RR'),null,null,0);
Insert into A_PHASE_MEMBERSHIP (MPM_ID,MPM_ENG_ID,PHASE_NUMBER,DATE_STARTED,DATE_FINISHED,NOTES,ACTIVE) values (8,1,'PHASE THREE',to_date('30/09/12','DD/MM/RR'),to_date('16/10/12','DD/MM/RR'),null,1);
The requirements are:
The user must be able to request the extract for one or more calendar months, e.g.
May 2013
May 2013 – Sep 2013.
The file must contain a separate row for each calendar month in the requested range. Each row must contain the statistics computed for that calendar month.
The file must also include a row of totals.
The user must be able to request the extract for either Waitakere or Auckland or Consolidated (both courts’ statistics accumulated).
Then the part that I am stuck is
For each monitoring phase:
Phase name (e.g. “Phase One”)
Avg_time_in_phase_all_particip
for each phase name,
Add up days in each “phase name” Monitoring Phase, calculated as:
If Monitoring Phase.Date Finished is NULL or > month end date,
+(*Month end date* Minus Monitoring Phase.Date Started Plus 1)+
Otherwise (phase is complete)
+(Monitoring Phase.Date Finished Minus Monitoring Phase.Date Started Plus 1.)+
Divide by the numbers of all participants who have engaged in “phase name”.
This is the words of the Business Analyst,
I try to do as required but still struggle to identify end_month for the above formula to display for the range of months.
Of course, I can write two nested cursor. The first one run the list of month, then for each month, run the parameterised report.
But I prefer if possible just use SQL statements, or at least a PL/SQL but return a query.
With this way, I can create an APEX report, and use their CSV Extract function.
Yes, you are right, court_name is one of the selection parameters.
And the statistics is not exactly for one month. It is kind of trying to identify all phases that are running through the specified month (even phase.date_started is before the month start).
This is the reason why I put the condition AND ph.date_started <= last_day(TO_DATE('Oct 2012','MON YYYY')) (otherwise I get negative avg_days)
User can choose either one court "AA" or "BB" or combined which is all figures.
Sorry for bombarding you a lot of information.
Thanks a lot, again.
Edited by: Ann586341 on Oct 29, 2012 9:57 PM
Edited by: Ann586341 on Oct 29, 2012 9:59 PM

TS3276 i received a housing application in my gmail acct. and am able to view and download it but am unable to fill it out, unable to get a cursor to begin typing and fill it out

i recieved a housing application as an email, i am able to view and download the document but am unable to fill it out

If you can't fill it in in Preview, try downloading Adobe Reader and fill it in that way.
Also, it may not be electronically fillable. You may have to print it and fill it out by hand.

Stamp tool Paste clipboard image as stamp is greyed out & not selectable -

Stamp tool Paste clipboard image as stamp - This command is greyed out & not selectable - I have copied an image to the clipboard Acrobat X v10.1.4 o OS X 10.7.4 Lion does not find it. Under OS X 10.6.8 Snow Leopard it worked
Has anyone else got this working with OSX 10.7.4 Lion with Acrobat X ?- Its a consistent problem for me on both my MacBookPro & IMac computers

Exactly, that feature was so valuable for me in previous versions. I am not sure why someone who sells something would eliminate a feature that customers use. What person made that call? They are probably working at Microsoft now making those "great products" (though I do like Excel, but only because they haven't changed it, esentially, for years...of course, how much can you really change a calculator?).
Please fix this Adobe...I would be your biggest fan

Someone sends me a PDF form when I fill it out and email it back to them they receive it blank-why?

Someone sends me a PDF form when I fill it out and email it back to them they receive it blank-why?

All the fill-in PDF forms I've used are read/only. Meaning that whatever you fill in does not get stored and saved back with the file.
As Linc suggests, you will be creating a new PDF, that will not have fillable fields but that will contain whatever you filled in.

Fill spilling out of selection in Illustrator CC

Similar Messages

Maybe you are looking for