Filling Idoc data in hierarchy

Hi,
I want to fill the Idoc segments which is in hierarchy
    E1IDPU1
         E1IDPU5
             E1EDU03.
for segment E1IDPU1, I am filling in this way.
    L_E1IDPU1-DOCNAME = 'FST'.
      L_E1IDPU1-DOCNUMMR = WA_BSID-BELNR.
      move L_E1IDPU1 TO wa_edidd-sdata.
      move 'E1IDPU1' TO wa_edidd-segnam.
      append wa_edidd TO TB_EDIDD.
for segment E1IDPU5 and E1EDU03 I tried to fill in the following way, but while checking the Idoc in WE05, it is not showing data in hierachy, instead it is showing all segments same level.
     read table tb_edidd with key segnam = 'E1IDPU1'.
      lv_tabix = sy-tabix.
      clear wa_edidd.
      add 1 to lv_tabix.
      L_E1IDPU5-MOAQUAL = '002'.
      L_E1IDPU5-MOABETR = WA_BSID-DMBTR.
      L_E1IDPU5-CUXWAERZ = WA_BSID-WAERS.
      L_E1IDPU5-CUXDATUM = WA_BSID-BLDAT.
Could you please tell me how to to fill hierachical segments.
Regards,
Sankar

Hi,
Please check all the mandatory segments are filled.
compare the IDOC data (tb_edidd) hierarchy and basic type hierarchy before passing to the FM MASTER_IDOC_DISTRIBUTE . It has to be same.

Similar Messages

Idoc data modified

Good afternoon:
Does anybody know how to send in an idoc only the modified data?
Thanks in advance.
regards

Hi,
From what I understand,I think you are trying to modify a segemnt with some data.
I also assume that you are working in an include.
Anyway,to do the modification what you can do is loop at the edidd section of the idoc.Then when the segment name is the segment name where you want modification,fill the data in the work area of the segment and then modify the idoc edidd section.
To understand it better please see the piece of code below.
loop at edidd into lw_edidd.
lv_index = sy-index.
when lw_eiddd-segnam = <your segment name>.
lw_segment = lw_edidd-sdata.
clear lw_segment.
lw_segment-f1 = value.
lw_segment-f2 = value.
and so on.
move segment name to <work are type edidd-segnam>.
move lw_segment to <work are type edidd-sdata>.
modify edidd from work are type edidd
index lv_index
transporting segnam sdata.
endloop.
Hope it will bw useful.
Thanks,
Sandeep.

ABAP Report for IDOC data of perticular IDOC basic type

Hi,
I have requirment to create report to display the IDOC Data of the perticular IDOC type.
However I believe in IDOC the data comes in raw format.
Is there any standard TCODE wherein we can have IDOC data of perticular IDOC type.
or Could you please let me know how is it possible to retrieve data from IDOC using SAP ABAP .
Thanks
Vinay
Moderator message: (almost) duplicate post locked.
Edited by: Thomas Zloch on May 2, 2011 12:39 PM

Hi,
Please find a sample code
* Build Control records
CONTROL_RECORD_OUT-MESTYP = MESTYP.
CONTROL_RECORD_OUT-IDOCTP = IDOC_TYPE.
CONTROL_RECORD_OUT-RCVPRT = 'LS'.   " << Fill the receiver port type US/LS
CONTROL_RECORD_OUT-RCVPRN = LOGSYS.
* Build Data records
*--- EDIDD40 data Here if you have multiple items then make a loop
loop at i_itab.                   " i_itab contains the details about EDIDD40 fields
IT_EDIDD-SEGNAM = SEGMENT.   " Will be EDIDD40
IT_EDIDD-SDATA = i_itab.
*--- Append the data
APPEND IT_EDIDD.
endloop.
aRs

Upload Master data and hierarchy from BW to BPC : Account Hierarchy

Hello,
I know that you all are aware the property "ACCTYPE" is not available in BW for Account master data.
The requirement here is to load master data and hierarchy for Account dimension from BW to BPC. Can anyone suggest the best approach to populate the priperty "ACCTYPE" in the account dimension member sheet in BPC during this automated load process?
Thanks and regards,
RJ

Sure,
For exemple:
Assume that your infoprovider is 0COSTELMNT and you'll fill the ACCTYPE with the attribute 0CSTELMNTYP. (It's just a exemple).
In the transformation file, in the mapping field you just map the attribute to the property.
*OPTIONS
*MAPPING
ID=ID
ACCTYPE=0CSTELMNTYP
SCALING=*str(Y)
RATETYPE=*str(AVG)
IS_INPUT=*str(Y)
*CONVERSION
You can also, define a hardcode for any property.
F.E: ACCTYPE=*str(EXP)
I hope this can help you.
Lucas

How do i keep only the name of a month in a cell in Numbers and not have it auto fill the date and time?

how do i keep only the name of a month in a cell in Numbers and not have it auto fill the date and time?

Hi JN and Barry,
Barry wrote:
The second case may not be included in the available D&T formats in Numbers 3
For my region, the Date & Time data formats include month.
The Date Pop-Up
This may not be the case for all regions.
Remember that the month is only the display, and the Full Date & Time is still there. If I change the format to reveal what is behind the curtain:
Regards,
Ian.

Idoc data in flat file structure

Dear Experts,
We have idoc data in flat file structure. We need to fetch it using ftp and map it to an idoc.
please tell me how to proceed .
Thanks,
Aju

Hi,
For flat file you need to use the File content conversion parameters.
Refer the blog,
SAP Network Blog: How to process flat files with multiple documents like POs, SOs etc. in a File to IDoc scenario
How to process flat files with multiple documents like POs, SOs etc. in a File to IDoc scenario
Thanks
Swarup

XML IDOC data (hosted on a web server) & handling multiple WSDLs

Hi ALL,
1)how to design an Interface for picking up an XML IDOC data (hosted on a web server) which will be uploaded to SAP or converted to a file
this is what the customer has given me ..can any one explain me this and help me how to more forward
2).This Interface must use UDDI concept because we are going to use multiple BAPIs /RFCs as WSDLs
what is this mean can any send me some document on this
3).Use web-service navigator concept as we will be handling multiple WSDLs
i worked on 1. to define a place holder in WebAS for holding the
wsdls.
2. publish the wsdls in WebAS UDDI Repostory
but i have never used web-service navigator concept as we will be handling multiple WSDLs what is the difference ..send me some step by step docs ..
thanks very much
RK..

1.I am not clear with the requirement too. THere is no big deal in sending XML to IDOC or File. Based on your requirement you have to import IDOC structure or ify ou are using file, create a structure for the file.
If u are asking about sendin the XML directly without mapping, even you can do that without MM and even IM.
Please be more elaborate and if you are not clear with what client said, paraphrase them or ask again. Its not good to start work unless we are very clear with the requirement.
you can say to my understanding i feel this, now pI will send data like this. Is it correct?
2. More information on UDDI
http://en.wikipedia.org/wiki/UDDI
I dont think you need to worry much about this now with many features provided in ESR especially
3. http://<Host>:<port>/wsnavigator/
The webservices going out of PI are published here.
provide host and port are host and port details of ext system.
Once you enter link in your browser, it shows the available webservices hosted there.
All you need is to click on the required wsdl and test it.
It is as good as sending your data from PI to other system.
It is similar to Altova XML spy but the difference here is you enter the values directly here but in XML spy we send XML .

Read MULTIPLE idocs data with all sgmn to my internal table in a single

Dear SAP Folks!
I have a question, I know to read SINGLE idoc data with all segments, we have FM IDOC_READ_COMPLETELY but my requirement is to Read MULTIPLE idocs data with all segments to my internal table in a single shot without keeping this FM in loop! since it is performance issue, at a time i may want to read 1000 idocs data!
Could anyone please let me know is there any way to get this, keeping mind of performance and any other FM?
Best Regards,
Srini

Hi,
I know idoc numbers and i can write a select Query to DB table EDID4 to get all segments data to my internal table. But i am looking for FM to do this. because i have too many number of idocs and each idoc is having many segments(I am thinking in performance point of view!) The FM IDOC_READ_COMPLETELY can accept only ONE IDOC number as import parameters at a time to get segment data. in similar way do we have any other FM? or other way? except select query to EDID4 table?
Best Regards,
Srini

How to fill the data in extraction queue (LBWQ)?

Hi,
I modified the structure of datasource 2LIS_02_SCL (change an append structure), since an error occurs when I check the datasource, I deleted the the deltaqueue in RSA7, before that, I also checked the extractorqueue, it was empty.
But when I excute OLI3BW to fill the extractor queue, it happens nothing.
How can I fill the data in extractor queue so that I can extract data from R3 to BW?
Thanks .
Regards

Whta u have done is Filling setup tables not the extractor queu......
Could you please tell whether ur load is delta load or Full load?
Khaja

How to transform data from hierarchy table to taxonomy table?

Hi Friends
Regarding my issue:
1) I am having data in the hierarchy table which contains two fields(i.e. code, description) , now we have created another taxonomy table which contains two fields(i.e. code,description) same as hierarchy table.
2) hierarchy table only contains data, which we have imported data into hierarchy table using import manager. we don't have data in the taxonomy table.
3) now my issue is,we have to move that hierachical data in the hierarchy table to taxonomy without using import manager, only through the data manager using validations and assignments.
4) If any one have solution to this issue, please help me out.
Thanks in Advance
bharat.chinthapatla

Hi Ganesh,
Thanks for your reply,
I need to move data from hierarchy table to taxonomy table using validations and assignments.
Thanks in Advance
bharat.chinthapatla

IDOC data to excel file

Hi
I have downloaded the IDOC Data in my Excel file.
But the problem is that I am getting all the details in a single column.
I want the systematic data should appear on my Excel.
Thanks

hi,
    Sorry for the delay, just now i have seen your issue, here just i am trying to help you in case till now you have not got it....
Thanks
Satyasuresh
Here the code....
*& Report YSAT_IDOC_TO_EXCEL                     *
REPORT YSAT_IDOC_TO_EXCEL line-size 275.
data: idoc_control like EDIDC,
      NUMBER_OF_DATA_RECORDS like sy-dbcnt,
      NUMBER_OF_STATUS_RECORDS like sy-dbcnt,
      INT_EDIDS like edids occurs 0 with header line,
      INT_EDIDD like edidd occurs 0 with header line.
data: begin of i_split1 occurs 0,
          segment(20),
          fieldname(20),
          field1(20),
          field2(20),
          field3(20),
          field4(20),
          field5(60),
          field6(20),
          field7(20),
          field8(20),
      end of i_split1.
TYPE-POOLS : LEDID.
data: STRUCT_TYPE TYPE LEDID_STRUCT_TYPE ,
IDOC_STRUCT TYPE LEDID_T_IDOC_STRUCT,
SEGMENTS TYPE LEDID_T_SEGMENT,
SEGMENT_STRUCT TYPE LEDID_T_SEGMENT_STRUCT,
excel_tab(2000) occurs 0 with header line.
parameter: DOCNUM like edidc-docnum obligatory, "Idoc Number
sap_rel like SY-SAPRL default SY-SAPRL no-display ,
pi_ver like EDI_VERREC-VERSION default '3' no-display,
d_excel as checkbox default 'X'. "Download ?
start-of-selection.
perform read_idoc.
perform process_idoc.
if d_excel = 'X'.
    perform download_to_excel.
endif.
end-of-selection.
*& Form read_idoc
text
FORM read_idoc.
CALL FUNCTION 'IDOC_READ_COMPLETELY'
    EXPORTING
      DOCUMENT_NUMBER          = docnum
    IMPORTING
      IDOC_CONTROL             = idoc_control
      NUMBER_OF_DATA_RECORDS   = NUMBER_OF_DATA_RECORDS
      NUMBER_OF_STATUS_RECORDS = NUMBER_OF_STATUS_RECORDS
    TABLES
      INT_EDIDS                = INT_EDIDS
      INT_EDIDD                = INT_EDIDD
    EXCEPTIONS
      DOCUMENT_NOT_EXIST       = 1
      DOCUMENT_NUMBER_INVALID = 2
      OTHERS                   = 3.
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " read_idoc
*& Form process_idoc
text
FORM process_idoc.
perform read_idoc_structure.
perform display_data_records.
ENDFORM. " process_idoc
*& Form display_data_records
text
FORM display_data_records.
data: PE_seg_HEADER like EDI_SAPI01,
segname like EDI_IAPI12-SEGMENTTYP,
prev_segname like EDI_IAPI12-SEGMENTTYP value ' ',
pt_fields2 like EDI_IAPI12 occurs 0 with header line,
PT_FVALUES2 like EDI_IAPI14 occurs 0 with header line,
byte_first type i,
byte_last type i,
field_val(50),
tmp_str(15),
tmp_str3(15),
seg_repeats type i value 0,
tmp_str2(15),
tab_cr(2) type c value '@@',
tot_ctr type i value 0,
ctr type i value 0,
msg(40) type c.
data: IDOC_STRUCT_wa TYPE LEDID_IDOC_STRUCT.
sort int_edidd by segnum.
describe table int_edidd lines tot_ctr.
loop at int_edidd.
    move int_edidd-segnam to segname.
    clear msg.
    concatenate 'Reading segment ' segname
    into msg separated by space.
    if tot_ctr <> 0.
      ctr = ( 100 * sy-tabix ) / tot_ctr.
    endif.
SAPGUI_PROGRESS_INDICATOR
    CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
      EXPORTING
        PERCENTAGE = ctr
        TEXT       = msg.
    add 1 to seg_repeats.
    clear tmp_str2.
    if int_edidd-segnam <> prev_segname.
      seg_repeats = 1.
      clear: pe_seg_header, pt_fields2, pt_fvalues2.
      refresh: pt_fields2, pt_fvalues2.
SEGMENT_READ_COMPLETE
      CALL FUNCTION 'SEGMENT_READ_COMPLETE'
        EXPORTING
          PI_SEGTYP                 = segname
          PI_RELEASE                = sap_rel
          PI_VERSION                = pi_ver
        IMPORTING
          PE_HEADER                 = pe_seg_header
        TABLES
          PT_FIELDS                 = pt_fields2
          PT_FVALUES                = pt_fvalues2
        EXCEPTIONS
          SEGMENT_UNKNOWN           = 1
          SEGMENT_STRUCTURE_UNKNOWN = 2
          OTHERS                    = 3.
      IF SY-SUBRC <> 0.
        MESSAGE ID SY-MSGID TYPE 'I' NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      prev_segname = int_edidd-segnam.
    endif.
    read table idoc_struct into idoc_struct_wa with key
    segment_type = int_edidd-segnam.
    if sy-subrc = 0.
      IF IDOC_STRUCT_WA-SYNTAX_ATTRIB-MUSTFL = 'X'.
        TMP_STR = 'Mandatory'. "Mandatory
      ELSE.
        TMP_STR = 'Optional'. "Optional
      ENDIF.
      if IDOC_STRUCT_wa-SEGMENT_TYPE_ATTRIB-QUALIFIER = 'X'.
        tmp_str3 = 'Qualified'.
      else.
        tmp_str3 = 'Non-Qualified'.
      endif.
      shift IDOC_STRUCT_wa-SYNTAX_ATTRIB-OCCMAX
      left deleting leading '0'.
      move seg_repeats to tmp_str2.
      condense: IDOC_STRUCT_wa-SYNTAX_ATTRIB-OCCMAX, tmp_str2.
      concatenate tmp_str2 'of' IDOC_STRUCT_wa-SYNTAX_ATTRIB-OCCMAX
      into tmp_str2 separated by space.
      write :/ IDOC_STRUCT_wa-SEGMENT_TYPE,
      tmp_str,
      TMP_STR3,
      tmp_str2,
      IDOC_STRUCT_wa-SYNTAX_ATTRIB-HLEVEL,
      IDOC_STRUCT_wa-SEGMENT_TYPE_ATTRIB-plast,
      IDOC_STRUCT_wa-SEGMENT_TYPE_ATTRIB-DESCRP.
      if d_excel = 'X'.
        concatenate 'Segment Name' tab_cr
        'Mand / Opt ' tab_cr
        'Qual / non-Qual' tab_cr
        'Seq of Max' tab_cr
        'Level' tab_cr
        'Owner' tab_cr
        'Description'
        into excel_tab.
        append excel_tab.
        concatenate IDOC_STRUCT_wa-SEGMENT_TYPE tab_cr
        tmp_str tab_cr
        TMP_STR3 tab_cr
        tmp_str2 tab_cr
        IDOC_STRUCT_wa-SYNTAX_ATTRIB-HLEVEL tab_cr
        IDOC_STRUCT_wa-SEGMENT_TYPE_ATTRIB-plast tab_cr
        IDOC_STRUCT_wa-SEGMENT_TYPE_ATTRIB-DESCRP
        into excel_tab.
        append excel_tab.
        concatenate tab_cr
        'Field Nma' tab_cr
        'Type' tab_cr
        'Length' tab_cr
        'Byte From' tab_cr
        'Byte To' tab_cr
        'Description' tab_cr
        'Value' tab_cr
        'Qualifier Meaning'
        into excel_tab.
        append excel_tab.
      endif.
    endif.
    sort pt_fields2 by field_pos.
    byte_first = 0.
    loop at pt_fields2.
      clear: field_val.
      byte_last = pt_fields2-EXTLEN.
      write int_edidd-sdata+byte_first(byte_last) to
      field_val left-justified.
      shift pt_fields2-EXTLEN left deleting leading '0'.
      shift pt_fields2-byte_first left deleting leading '0'.
      shift pt_fields2-byte_last left deleting leading '0'.
      write:/ ' ', pt_fields2-fieldname,
      pt_fields2-datatype,
      pt_fields2-EXTLEN,
      pt_fields2-byte_first ,
      pt_fields2-byte_last,
      pt_fields2-descrp,
      field_val.
      read table pt_fvalues2 with key fieldname = pt_fields2-fieldname
      fldvalue_l = field_val.
      add byte_last to byte_first.
      if sy-subrc = 0.
        write : pt_fvalues2-descrp.
      else.
        clear pt_fvalues2-descrp.
      endif.
      if d_excel = 'X'.
        concatenate tab_cr pt_fields2-fieldname tab_cr
        pt_fields2-datatype tab_cr
        pt_fields2-EXTLEN tab_cr
        pt_fields2-byte_first tab_cr
        pt_fields2-byte_last tab_cr
        pt_fields2-descrp tab_cr
        field_val tab_cr
        pt_fvalues2-descrp
        into excel_tab.
        append excel_tab.
      endif.
    endloop.
endloop.
ENDFORM. " display_data_records
*& Form read_idoc_structure
text
FORM read_idoc_structure.
data: idoctype type LEDID_IDOCTYPE.
if not idoc_control-cimtyp is initial.
    STRUCT_TYPE = 'E'. "Extended
    idoctype = idoc_control-cimtyp.
else.
    STRUCT_TYPE = 'B'. "Basic
    idoctype = idoc_control-idoctp.
endif.
CALL FUNCTION 'IDOC_TYPE_COMPLETE_READ'
    EXPORTING
      RELEASE              = sap_rel
      STRUCT_TYPE          = STRUCT_TYPE
      IDOCTYPE             = idoctype
      VERSION              = pi_ver
    TABLES
      IDOC_STRUCT          = idoc_struct
      SEGMENTS             = segments
      SEGMENT_STRUCT       = segment_struct
    EXCEPTIONS
      IDOCTYPE_UNKNOWN     = 1
      IDOCSTRUCT_UNKNOWN   = 2
      SEGMENT_DATA_MISSING = 3
      ILLEGAL_STRUCT_TYPE = 4
      OTHERS               = 5.
IF SY-SUBRC <> 0 and sy-subrc <> 3.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " read_idoc_structure
*& Form download_to_excel
text
FORM download_to_excel.
data: name like RLGRAP-FILENAME.
data: name TYPE STRING.
shift docnum left deleting leading '0'.
concatenate docnum '-' idoc_control-idoctp '.xls'
into name.
perform to_split.
CALL FUNCTION 'RH_START_EXCEL_WITH_DATA'
   EXPORTING
     DATA_filename       = name
     WAIT                = 'X'
     DATA_TABLE          = excel_tab[]
   EXCEPTIONS
     NO_BATCH            = 1
     EXCEL_NOT_INSTALLED = 2
     WRONG_VERSION       = 3
     INTERNAL_ERROR      = 4
     INVALID_TYPE        = 5
     CANCELLED           = 6
     DOWNLOAD_ERROR      = 7
     OTHERS              = 8.
IF SY-SUBRC <> 0.
   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
   WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
break donepus.
CALL FUNCTION 'WS_DOWNLOAD'
    EXPORTING
      FILENAME                = 'C:\Documents and Settings\donepus\Desktop\test2.xls'
      FILETYPE                = 'DAT'
    TABLES
      DATA_TAB                = i_split1
    EXCEPTIONS
      CONVERSION_ERROR        = 1
      INVALID_TABLE_WIDTH     = 2
      INVALID_TYPE            = 3
      NO_BATCH                = 4
      UNKNOWN_ERROR           = 5
      GUI_REFUSE_FILETRANSFER = 6
      OTHERS                  = 7.
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " download_to_excel
*&      Form to_split
      text
--> p1        text
<-- p2        text
FORM to_split .
   break donepus.
loop at excel_tab.
    split excel_tab at '@@' into i_split1-segment
                                 i_split1-fieldname
                                 i_split1-field1
                                 i_split1-field2
                                 i_split1-field3
                                 i_split1-field4
                                 i_split1-field5
                                 i_split1-field6
                                 i_split1-field7
                                 i_split1-field8.
        append i_split1.
        clear i_split1.
endloop.
ENDFORM.                    " to_split

Idoc data in transparent tables

Hi,
There is a existing program which picks up data from Idoc and creates the output files for further processing.
My requirement is I need to pick up data with using Idoc tables, is there any SAP transparent tables which stores the data? Is it possible or is there any method available to select the data?
Regards,
Kumar.

Hi,
Use the table EDID4 to read the IDOC data.
You can also use the FM IDOC_READ_COMPLETELY
Thanks,
Naren

Idoc data comparison between different R/3 clients.

Hi ppl ,
Is there a way idoc comparison can be done between different clients without going
by Segment by Segment comparison ?
I have a requirement wherein i have thousands of idocs in QA system and i need to
compare those with the ones in PROD system. The segments in the idocs may vary
depending on the data that flows from the third party system which will post idocs in R/3.
So, the segment wise comparison of data is also ruled out .
Do we have any standard reports which will help in achieving this purpose ?
Please let me know how the idoc data comparison can be carried out .
Regards,
Nick.

Hi Nick,
There is no standared tools available for comparing the data of two idocs.
By using beyond compare s/w you can check the data, but the thing is you have to download the idoc data to file format.
By using Idoc_xml_transform function module you can download idoc data to xml format, after you can compare.
Check this
http://download.cnet.com/Beyond-Compare/3000-2242_4-10015731.html
Regards
Ramesh

Idoc data definitions- TPSDL01,SHPMNT03,TPSSHT01

My translator allows me to import idoc standards.
My customer is not sure how to export the data definitions from SAP. Are the above IDOC data type definitions available on the web?
Sample definition:
BEGIN_RECORD_SECTION
BEGIN_CONTROL_RECORD
    BEGIN_FIELDS
      NAME                 TABNAM
      TEXT                 Name of table structure
      TYPE                 CHARACTER
      LENGTH               000010
      FIELD_POS            0001
      BYTE_FIRST           000001
      BYTE_LAST            000010
      NAME                 MANDT
      TEXT                 Client
      TYPE                 CHARACTER
      LENGTH               000003
      FIELD_POS            0002
      BYTE_FIRST           000011
      BYTE_LAST            000013
      VALUE_TABLE          T000

IDOC Data transfer

Hi Experts,
I have few questions related to IDOC Data transfer. I have two different SAP Systems S1 and S2, S1 Creates sales order and send the data through IDOC Type ORDERS05 to S2, To create sales order in S1.
As i know, Program IDOC_INPUT_ORDERS is used for I/B IDocs in S2. Will be there be any programs to push the data from S1 System.
Thank you
Kris

hi,
idoc is not meant for sending files to another system, they are basically data containers which are sent to other systems like to send the data related to sales orders you can send idoc ORDERS.
you need to first be clear with the requirement for which business object you want to transfer the data, then need to look out if the Idoc is available for the same then only u can sent it.
for more info on idocs you can easily search on forums.
Reg,
NJ

Filling Idoc data in hierarchy

Similar Messages

Maybe you are looking for