Filter criteria in ALV report not working

Hi,
In ALV report , when i click on filter button , it does not filter the report according to the filtered criteria. this happens in the cases where the selection criteria is a lengthy field. when i debug after the filter criteria it goes into standard function.
i am using REUSE_ALV_GRID_DISPLAY
is there any way in which i can correct this?
thanks,
Amit
null

chk this useful thread
Re: ALV problem (with filter use)

Similar Messages

Multiple ALV reports not working in batch mode

All,
I have a report that creates a detail and a summary ALV report in one program.
When run in the foreground it works great - runs the ALV detail first and displays it and you arrow back and then the runs the ALV summary report and displays it.
But when run in the background - I get the ALV detail report sent to the spooler but nothing for the ALV summary report. Well I do get a second report sent to the spooler but it does not have any data displayed.
I ran this in debug mode - faking out the program to believe it was in Batch Mode.
Everything appears to look correct when it does the call to ALV - the outtab table has the summary data in it.
Here is the calls to ALV:
Function Module to display report in ALV List Format
IF l_detail = 'X'.
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
      EXPORTING
        i_callback_program      = l_repid
        i_callback_user_command = c_ucomm
        i_grid_title            = p_title
        i_grid_settings         = w_alv_grid
        is_layout               = w_alv_layout
        it_fieldcat             = w_alv_field
        it_sort                 = w_alv_sort
        i_default               = 'X'
        i_save                  = ' '
        it_events               = w_alv_event
        is_print                = w_alv_print
      TABLES
        t_outtab                = t_detail
      EXCEPTIONS
        program_error           = 1
        OTHERS                  = 2.
ELSEIF l_summry = 'X'.
be sure th file has the new SNO values assigned B4 calling!
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
      EXPORTING
        i_callback_program      = l_repid
        i_callback_user_command = c_ucomm
        i_grid_title            = p_title
        i_grid_settings         = w_alv_grid
        is_layout               = w_alv_layout
        it_fieldcat             = w_alv_field
        it_sort                 = w_alv_sort
        i_default               = 'X'
        i_save                  = ' '
        it_events               = w_alv_event
        is_print                = w_alv_print
      TABLES
        t_outtab                = t_summry
      EXCEPTIONS
        program_error           = 1
        OTHERS                  = 2.
ENDIF.
Maybe there something I should be calling or clearing out in the above parms when trying to create to spoolfiles from ALV in background mode.
Any suggestions are most apprecaited.
Thanks.
Scott

before calling the ALV create a separate spool for each list.
if sy-batch = 'X'.
get the print parameters with FM GET_PRINT_RARAMETERS
pass the parameters (you can change them if you like) to
NEW-PAGE PRINT ON PARAMETERS your_parameters NO DIALOG
endif.

Filter Based on other report not working

Hi Gurus,
I am using OBIEE 10g.
I have a Dashboard page in that i have a prompt and 2 reports,(A, B reports). Report B is using the same columns as prompt where as report A not.
Report A has columns which hold the same data as report B, so i thougt to pass the values based on Report B column using the filter based on other report. I am able to complete it succssfuly but Report A is not having amount of data that i was excepting. When i started investigating i found out that the column which i am using in the prompt and report B have values ( NEW, OLD, NULL) report A able to take the values NEW and OLD but the NULL values are not passing to report A. In report B it is taking null value as it has filter as prompted.
Is it any way to have the values (NEW, OLD, NULL) in report A?
Thanks in Advance.
Regards
Ali

Hi Deep,
Thanks for taking time to answer my question.
I have to display null. If i Mask with something then i dont get proper data in report A, couse in the table it is null.
Thanks
Ali

CDR report not working

Hi,
We have LYNC 2013 and Monitoring is enabled. the CDR report is not working. even User Activity summary for telconferencing and for audio, reports not working.
Kindly suggest troubleshooting steps.
Can we have any SQL query to fetch the report from database?
Thanks
jitender

Hi Raju,
From Monitoring server , CDR report is not working. Even "User Activity Report" not working and giving below error for "Telephony Conference" and as well for "A/V Conference"
" No results match the report filters. Change the filter values and submit the query again."
Thanks
jitender

IPS event monitor and reports not working

Dear after upgrading my IPS from E3 to E4  the event monitor and reports not working, can you please advice my to solve this issues

Hi All,
Filter settings below:
The filter works partially as I don't get alerts on the IPS itself.
Firewall LOG:
4          Feb 14 2014          15:33:22                              39715                    514          IPS requested to drop UDP packet from SOURCE_VLAN_NUMBER:/39715 to DESTINATION_VLAN_NUMBER:/514
IPS LOG (when enabled):
evIdsAlert: eventId=1352793300955167909 vendor=Cisco severity=low
originator:
    hostId: SSM02
    appName: sensorApp
    appInstanceId: 1192
time: Feb 14, 2014 15:33:22 UTC offset=0 timeZone=GMT00:00
signature:   description=IP Fragment Too Small id=1206 version=S212 type=anomaly created=20030801
    subsigId: 0
    sigDetails: Too many small IP fragments in datagram
interfaceGroup: vs0
vlan: 0
participants:
    attacker:
      addr: 172.x.x.x locality=OUT
      port: 39715
    target:
      addr: x.x.x.x locality=OUT
      port: 514
      os:   idSource=unknown type=unknown relevance=relevant
alertDetails: InterfaceAttributes: context="single_vf" physical="Unknown" backplane="GigabitEthernet0/1" ;
riskRatingValue: 50 targetValueRating=medium attackRelevanceRating=relevant
threatRatingValue: 50
interface: GigabitEthernet0/1 context=single_vf physical=Unknown backplane=GigabitEthernet0/1
protocol: udp
Our next step is to make a service policy exception on the firewall itself. We are also considering reloading the IPS device or at least the analysis engine.
Thanks for all your help so far. Any more suggestions are most welcome. I'll keep you up to date.
Regards
Mariusz

Output of a "report_attribute_error_message" in a sorted ALV does not work!

Hi all/SAP,
in my thread editable ALV - how to throw an error message for a specific line & field I figured out, that the output of a "report_attribute_error_message" in the ON_DATA_CHECK event of an editable ALV does not work, if sorting is active for a column.
Thanks to The specified item was not found. for reproducing this problem.
A similar problem exists, using an aggregation of a column. This will lead to a runtime exception.
I've found no fix in the OSS to this problem.
So is there a way to use sorting together with the output of a "report_attribute_error_message"
or if this is a bug, can/will this be fixed in the (near) future?
Thanks,
Andreas

Hi,
Yes, it doesnot work with those (RB,CB) UI elements...Have you checked for any note..I have also tried but no luck..
Regards,
Lekha.

Drill down report not working in 1og report

hi all,
Drill down report not working in 1og.
in 6i it working good but 10g not working .
plz help any one.
thanks

Hello,
For detailled instructions about hyperlinks :
Oracle® Reports Building Reports
10g Release 2 (10.1.2)
B13895-01
3.6.10.1.8 Creating a hyperlink using the Property Inspector
http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b13895/orbr_howto.htm#i1062802
Regards

After i install Visual-Studio 2013 crystal-report not working

hi
after i install Visual-Studio 2013 crystal-report not working on my Visual-Studio 2010 projects
when i try to open crystal-report i see this:

Hi E_gold,
Crystal Reports forum may be a better place for you.
Thanks for your understanding.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Interactive Reports not working with APEX listener

Hi,
I have posted this question APEX listener forum couple of weeks ago but very few responses.
If any one from here can help then it would be great.
Interactive Reports not working with APEX listener
Best Regards,
Baig

Sorry for late response.
It was a firewall issue

ALV Report not getting displayed in Background

Hi All,
I am using Object Oriented approach of ALV to display the Report, in foreground it works fine but in background I don't get the Report.
I am using the below piece of code but doesn't seems to be working well.
CALL METHOD cl_gui_alv_grid=>offline
    RECEIVING
e_offline = OFF.
if OFF is initial.
*----Creating custom container instance
    CREATE OBJECT gr_ccontainer
     EXPORTING
       container_name = gc_custom_control_name
     EXCEPTIONS
       cntl_error = 1
       cntl_system_error = 2
       create_error = 3
       lifetime_error = 4
       lifetime_dynpro_dynpro_link = 5
       others = 6 .
    IF sy-subrc <> 0.
*--Exception handling
    ENDIF.
    CREATE OBJECT gr_alvgrid
     EXPORTING
       i_parent = gr_ccontainer.
Its not working. If anyone of you could let me know what can be done to get the ALV report with all the fields in the background.
Thanks.

Hi Geeta,
I was about to say this...
If that is the case u don hav to design a custom control in ur screen, instead use ur screen as a
dummy container which will work well in fore/back ground
CREATE OBJECT go_grid
    EXPORTING
      i_parent = cl_gui_container=>default_screen. "Default scrren taken as dummy container
But u got the answer in previous post : )..
For ur second question:
goto SP01->give spool no->exec->select the spool no(check)-> press shift+F4...
Cheers,
Jose.

Report Not working in the Web Browser

Hi ALL ,
Am working on a item SKU report . The report is running fine in the BIDS but once i try to view the report in the WEB Browser
tried both Mozilla and Internet Explorer no data is shows up .
The report has 2 report filter one is on the service and the other one is the item sku its a multi - parameter that contains
a list of more than 6000 different SKU . Can the filter be the reason for the report not displaying in the web browser.
If yes kindly advice me what the workaround for it .
I tried having the filter in the SQL main query but it was of no use no data it was showing after having the ssrs report filter
at least right information its showing but in the BIDS not in the main web browser.
Kindly Help
Priya

Hi Priya,
According to the description, I understand that there are parameters (@SKU and @SKUlist) in the report, and SKUlist parameter is multi-value parameter. When selecting values of the SKU parameter, the parameter SKUlist will display corresponding values. In this
case, you should create cascading parameters, right? And you use parameters to filter the report.
Because the data of the report can be shown in the Business Intelligence Development Studio (BIDS) environment, the issue only occurs after deploying the report to report server. Based on my research, I think it may occur because of web browser issue. I have
known you use Mozilla and Internet Explorer to view the report but there is still no data.
In Reporting Services, not all report functionality is supported by all browsers. In this scenario, I suggest you considering the aspects of the setting or third party add-ons of Internet Explorer (IE). You can refer to the steps below:
1. Click Tools -> Internet options.
2. Switch to the Security tab, click Local intranet, and then select Default level.
3. Switch to the Advanced tab, and click Restore advanced settings.
4. Temporarily disable third party add-ons. For detailed steps, please see the link:
http://windows.microsoft.com/en-IN/internet-explorer/manage-add-ons#ie=ie-10
Reference:http://technet.microsoft.com/en-us/library/ms156511(v=sql.105).aspx
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support

MiniSAP 6.20: ALV tree not working in background

Good day!
SAP provides a sample ALV tree program, BCALV_TREE_DEMO, which could be submitted in the background.
However, it does not work in MiniSAP 6.20. It's kind of bizarre as it works in our Test system.
Does anyone has any idea what's happening.

Good day!
The ALV tree report is submitted in the background.
By right, it should produce an ALV tree report in the print spool.
However, it does not seem to work. I checked the program and found there is a logic to check whether it's a background job or not. If it is, it would not create the container.
It's bizarre that it does not work in MiniSAP 6.20 but it works in 6.10

ALV Editable not working

Hello Abapers,
I am not getting the desired output as per example.
I have followed all the steps as per the example but still a looser can anyone help me in this.
When I execute the program I get the following run time error
Field symbol has not been assigned.
I tried commenting the subroutine call
1} perform Change_fieldcatalogue and fetch data.
and i was getting the 2 custom container (top, bottom) on the screen output this time.
I have also created a screen 600 with all the attributes.
But i have doubt with this statement
Create a Custom container and name it CCONT and OK code as OK_CODE.
Save check and Activate the screen painter.
I hope on the layout screen the one which says custom control is only the custom container but i see that the fct code box is not highlighted then how can i assign a fctcode.
Could you plz also clear this.
Thanks in advance.
Ranjith Nambiar
Program code below
A small note about this program
*& AS : ALV report which displays the contents of the table T006
*& (as a docking container in the bottom) along with the
*& editable ALV which contains the ALV fieldcatalogue table structure.
*& With the available toolbar options of the editable ALV in the output,
*& user can change the fieldcatalogue as per his requirement.
*& When the user clicks 'SUBMIT',the display of the ALV with table T006
*& gets modified and customised accordingly to the user's requirement.
REPORT ZNRD_ALV_EDITABLE.
* Structure declaration for t006
types : begin of ty_t006.
        include structure t006.
types : end of ty_t006.
* Internal table and work area declaration for t006.
data : it_t006 type standard table of ty_t006,
       wa_t006 type ty_t006.
* Declaration for ALV
data : ok_code type sy-ucomm,            " Ok code.
       it_fcat type lvc_t_fcat,          " Fieldcatalogue.
       it_fieldcat type lvc_t_fcat,      " Fieldcatalogue for Fieldcatalogue itself.
       it_layout type lvc_s_layo.
*Declaration for toolbar functions
data : it_excl_func type ui_functions,
* Controls to display it_t006 and its fieldcatalogue
       cont_dock type ref to cl_gui_docking_container,
       cont_alvgd type ref to cl_gui_alv_grid,
* Controls to display fieldcatalogue as editable alv gridand container
       cont_cust type ref to cl_gui_custom_container,
       cont_editalvgd type ref to cl_gui_alv_grid.
initialization.
start-of-selection.
* Local class definition for data changed in fieldcatalogue alv
CLASS lcl_event_receiver definition.
public section.
methods handle_data_changed
for event data_changed of cl_gui_alv_grid
    importing er_data_changed.
endclass.        " lcl_event_receiver definition.
* Local class implementation for data changed in fieldcatalogue alv
CLASS lcl_event_receiver implementation.
method handle_data_changed.
endmethod.     " handle_data_changed.
endclass.        "lcl_event_receiver implementation
* Data declaration for event receiver
data : event_receiver type ref to lcl_event_receiver.
end-of-selection.
* Setting the screen for alv output for table display and changed fieldcatalogue display
set screen 600.
*&      Module STATUS_0600 OUTPUT
*       text
MODULE STATUS_0600 OUTPUT.
SET PF-STATUS 'STATUS600'.
SET TITLEBAR 'TITLE600'.
* Create ALV grid if doesn't exits.
if cont_dock is initial.
perform Create_alv.
endif.
ENDMODULE.                 " STATUS_0600 OUTPUT
*&      Form Create_alv
*       text
* --> p1        text
* <-- p2        text
FORM Create_alv.
* Create a docking container and dock the control at the bottom
create object cont_dock
exporting
    dynnr = '600'
    extension = 100
    side = cl_gui_docking_container=>dock_at_bottom.
* Create ALV grid for displaying the table
create object cont_alvgd
exporting
    i_parent = cont_dock.
* Create custom container for ALV
create object cont_cust
exporting
    container_name = 'CCONT'.
* Create alv editable grid
create object cont_editalvgd
exporting
   i_parent = cont_cust.
* Register events for the editable alv
create object event_receiver.
set handler event_receiver->handle_data_changed for cont_editalvgd.
call method cont_editalvgd->register_edit_event
exporting
    i_event_id = cl_gui_alv_grid=>mc_evt_modified.
*Building fieldcatalogue for the initial display
perform Build_fieldcatalogue changing it_fcat it_fieldcat.
* Building the fieldcatalogue after the user has changed it
perform Change_fieldcatalogue changing it_fieldcat.
* Fetch data from the table.
perform Fetch_data.
* Get excluding functions for the alv editable tool bar
APPEND cl_gui_alv_grid=>mc_fc_loc_append_row TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_loc_insert_row TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_loc_cut TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_sort TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_sort_asc TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_sort_dsc TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_subtot TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_sum TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_graph TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_info TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_print TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_filter TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_views TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_mb_export TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_mb_sum TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_mb_sum TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_mb_paste TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_find TO it_excl_func.
APPEND cl_gui_alv_grid=>mc_fc_loc_copy TO it_excl_func.
*Alv display for the T006 table at the bottom
CALL METHOD cont_alvgd->set_table_for_first_display
    CHANGING
      it_outtab       = it_t006[]
      it_fieldcatalog = it_fcat[].
* optimize column width of grid displaying fieldcatalog
it_layout-cwidth_opt = 'X'.
* Get fieldcatalog of table T006 - alv might have
* modified it after passing.
CALL METHOD cont_alvgd->get_frontend_fieldcatalog
    IMPORTING
      et_fieldcatalog = it_fcat[].
*to Send Buffered Automation Queue to Frontend
CALL METHOD cl_gui_cfw=>flush.
* Display fieldcatalog of table T006 in editable alv grid
CALL METHOD cont_editalvgd->set_table_for_first_display
    EXPORTING
      is_layout            = it_layout
      it_toolbar_excluding = it_excl_func
    CHANGING
      it_outtab            = it_fcat[]
      it_fieldcatalog      = it_fieldcat[].
ENDFORM.                    " Create_alv
*&      Module USER_COMMAND_0600 INPUT
*       text
MODULE USER_COMMAND_0600 INPUT.
case ok_code.
when 'SUBMIT'.
* To get the current fieldcatalogue from the front end
    call method cont_alvgd->set_frontend_fieldcatalog
    exporting
      it_fieldcatalog = it_fieldcat.
    call method cont_alvgd->refresh_table_display.
    call method cl_gui_cfw=>flush.
when 'EXIT'.
    leave program.
endcase.
ENDMODULE.                 " USER_COMMAND_0600 INPUT
*&      Form Build_fieldcatalogue
*       text
*      <--P_IT_FCAT text
*      <--P_IT_FIELDCAT text
FORM Build_fieldcatalogue CHANGING P_IT_FCAT
                                    P_IT_FIELDCAT.
* Fieldcatalog for table T006: it_fldcat
* to generate the fields automatically
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
    EXPORTING
      i_structure_name       = 'T006'
    CHANGING
      ct_fieldcat            = it_fieldcat[]
    EXCEPTIONS
      inconsistent_interface = 1
      program_error          = 2
      OTHERS                 = 3.
* Fieldcatalog for table LVC_T_FCAT:it_fcat
* Generate fieldcatalog of fieldcatalog structure.
* This fieldcatalog is used to display fieldcatalog 'it_fldcat'
* on the top of the screen.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
    EXPORTING
      i_structure_name       = 'LVC_S_FCAT'
    CHANGING
      ct_fieldcat            = it_fcat[]
    EXCEPTIONS
      inconsistent_interface = 1
      program_error          = 2
      OTHERS                 = 3.
ENDFORM.                    " Build_fieldcatalogue
*&      Form Change_fieldcatalogue
* After the user has modified the fieldcatalogue we build another fieldcat
* for the modified alv display
*      <--P_IT_FIELDCAT text
FORM Change_fieldcatalogue CHANGING P_IT_FIELDCAT.
DATA ls_fcat TYPE lvc_s_fcat.
LOOP AT it_fcat INTO ls_fcat.
    ls_fcat-coltext = ls_fcat-fieldname.
    ls_fcat-edit = 'X'.
    IF ls_fcat-fieldname = 'COL_POS' OR ls_fcat-fieldname = 'FIELDNAME'.
      ls_fcat-key = 'X'.
    ENDIF.
    MODIFY it_fcat FROM ls_fcat.
ENDLOOP.
ENDFORM.                    " Change_fieldcatalogue
*&      Form Fetch_data
*       text
* --> p1        text
* <-- p2        text
FORM Fetch_data .
select * from t006 into table it_t006 up to 50 rows.
ENDFORM.                    " Fetch_data

comment this particular section deals with top container.
CALL METHOD cont_editalvgd->set_table_for_first_display
    EXPORTING
      is_layout            = it_layout
      it_toolbar_excluding = it_excl_func
    CHANGING
      it_outtab            = it_fcat[]
      it_fieldcatalog      = it_fieldcat[].
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
    EXPORTING
      i_structure_name       = 'LVC_S_FCAT' "This is deep strucure
    CHANGING
      ct_fieldcat            = it_fcat[]
    EXCEPTIONS
      inconsistent_interface = 1
      program_error          = 2
      OTHERS                 = 3.
LVC_S_FCAT is a deep structure , so try to comment that section and see. if you want that part , populate the fieldcatalog manually.

Discoverer report not working on R12 !

We have just migrated to R12 from 11i and some of the discoverer query is not working, but the same is working fine when we ran thru SQL Developer or TOAD.
Is there any context (mo_global.set_policy_context) needs to be set in Discoverer report to get the data?
Thanks

Thanks Srini,
There is no any specific error message, the strange thing is if I run the Discoverer report is not returning any data, but if I set the mo_global.set_policy_context ('S',111) in SQL Developer or TOAD and then run the discoverer report it return data...
Any pointers?

Crystal Report not works in JAR File

I'm using Eclipse All in one, which includes Crystal Reports.. I Connected my Java program with Crystal Reports and its working properly. Now my problem is that the Report is not working in JAR files.. It throws some exception as
"com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: com.businessobjects
com.businessobjects.reports.sdk.JRCCommunicationAdapter---- Error code:-2147215357 Error code name:internal"
Whats the Error.. I don't know. I think that i may missed some CLASSPATH Files. The included CLASSPATH Files are:
ReportViewer.jar
jrcerom.jar
Concurrent.jar
CrystalCharting.jar
CrystalCommon.jar
CrystalContentModels.jar
CrystalExporters.jar
CrystalExportingBase.jar
CrystalFormulas.jar
CrystalQueryEngine.jar
CrystalReportEngine.jar
CrystalReportingCommon.jar
icu4j.jar
keycodeDecoder.jar
log4j.jar
MetafileRenderer.jar
rasapp.jar
rascore.jar
rpoifs.jar
Serialization.jar
URIUtil.jar
xercesImpl.jar
xml-apis.jar
and the mysql-connector jar file
Anybody help me please...

Unable to load database connector
'com.crystaldecisions.reports.queryengine..driverImpl.
DriverLoader
now you have any idea.. pleaseIs that a typo where you have two periods below?
queryengine..driverImplOther than that I don't think anybody here can help you with that. If your classpath includes all necessary JAR files and you are able to access all your resources from within your application JAR file, then I imagine there is a problem with the third-party crystal decisions JAR file or how you are attempting to use it.
My advice to you is to try and contact support with the vendor or provider of this API or possibly try posting on a support forum on their website to see if somebody can help you there.

Filter criteria in ALV report not working

Similar Messages

Maybe you are looking for