Filter for BAdi CRM_ORDER_STATUS does not work in WebUI

Hello,
we have made an implementation for BAdi CRM_ORDER_STATUS for our sales cycle.
In detail:
The BAdi implementation shall be triggered if the user sets a special user status within an opportunity.
Therefor we have used the standard filter functionality provided by this BAdi (giving the correct header status profile and user status).
Using transaction CRMD_ORDER in SAP GUI, creating an opportunity and setting the special user status -> the BAdi implementation is triggered as expected.
But: If we are using the WebUI the done BAdi implementation is triggered at every roundrip caused by creating/editing an opportunity and not only at setting the user status.
Does anybody of you made similar experiences with using BAdis in WebUI (SAP CRM 7.0)?
Cheers,
André
**EDIT***
It´s possible coding the filter within the BAdi implementation.
But we prefer using the provided SAP standard.
Edited by: Andre Schillack on Apr 23, 2009 8:47 PM

Hi Andre,
I just checked my system CRM2007 and below is what I found in WebUI mode:
During the build of DDLB for Status field, it calls method cl_crm_uiu_status_info=>get_status_info. What it does is:
1. It derives all status codes for the user status profile (based on customizing)
2. And then for each status code, it triggers the BADI based on filter value. In the BADI, customer can decide whether the particular status (filtered value) is allowed to see in the DDLB.
Since it is building the DDLB for Status field every time there is change on the opportunity and therefore DDLB method calls the BADI every time to build the Status code list.
If you want to do further processing based on status change in the method BEFORE_CHANGE, you can try the following code.
if is_status_wrk-active_old = 'X' and
       is_status_wrk-user_stat_proc = 'CRMACTIV' and
       is_status_wrk-status = 'E0002'.
Do something
endif.
I hope I have not confused you.
I feel that this is standard behaviour in WebUI. You may want to check with SAP OSS also.
Regards,
Paparao Undavali

Similar Messages

  • My dvd slot for imac10,1 does not work. It rejects the disc. Problem after reinstall of backup from hdd.

    My dvd slot for imac10,1 does not work. I had a new harddrive installed in November and the MacStore installed my backups from an external harddrive. I do not use it other than to upload programs, so I have not tried using it until tax season, but it rejects the disc. The ata file indicates no dvd firmware, but the serial-ata does indicate firmware for a dvdrw. What might I do about this to bring the dvd back, least expensive to most?

    Yesterday I started having the same problem. Can read disc (play movies and music) but blank disk are ejected or idvd cannot see the blank disk. I have a almost 12 month old 27" i7 imac.

  • Can't get to settings to turn on wifi because "sign in to icloud" pops up and asks for pw which does not work because i can't get to wifi  ?p

    can't get to settings to turn on wifi because "sign in to icloud" pops up and asks for pw which does not work because i can't get to wifi  ?

    The problem is I cannot turn on wireless setting.  The "sign in to icloud  -- enter appleid password" popup will not go away. when i enter the pw and click ok, the same balloon pops up again.  If I click "cancel" it pops again. Since I am not on the internet (because I cannot turn the ipad wireless on) the sign in to icloud obviously will not work.  Vicious circle.

  • What can I do for the following situation: I think my insert slot for the headphones does not work; when I put in any cable that should and can go in all I hear is low frequent static sounds.

    What can I do for the following situation: I think my insert slot for the headphones does not work; when I put in any cable that should and can go in all I hear is low frequent static sounds.

    You might try talking to the Apple store manager and see if you don't get more help...you might also contact Apple.com/support and see if they can give you a contact with the Apple Italy offices.
    Sounds like you have two levels of failure, the first shop that did the repair and broke a wire, and the second that has disabled something else and isn't helping.
    Apple officially refurbished equipment is usually good quality.  Surprising this has happened but you need to press on with complaints and try for resolution.

  • [svn:fx-trunk] 7473: Fix for 'ant asdoc' does not work.

    Revision: 7473
    Author:   [email protected]
    Date:     2009-06-01 12:09:26 -0700 (Mon, 01 Jun 2009)
    Log Message:
    Fix for 'ant asdoc' does not work.
    It should now work from both svn and package zip.
    Bugs: SDK-15306
    QE Notes: None.
    Doc Notes: None.
    tests: checkintests
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-15306
    Modified Paths:
        flex/sdk/trunk/asdoc/build.xml
        flex/sdk/trunk/build.xml

  • Logfile monitoring for MSSQL ERRORLOG does not work with sapccmsr

    Hi
    We are running MSSQL2005 and wants to monitor the ERRORLOG for certain patterns, using the logfile monitoring feature of SAPCCMSR.
    We are using logfile monitoring with sapccmsr for a lot of other logfiles without problems, but for ERRORLOG is does not work!
    To be more precise: The agent does not report alerts for the text patterns specified. The agent runs fine and in RZ20 we can see that the logfile are checked every minute (but without finding the patterns).
    The strange thing is that:
    - It works for all other logfiles
    - If we do a "type ERRORLOG >> <new file>" and runs the same monitoring on this "copy" of the ERRORLOG then it works
    Any ideas?
    Best regards
    Tom Bo

    Hi,
    Please look at SAP note 1013331 https://service.sap.com/sap/support/notes/1013331.
    In special the changes after patch collection 2007/5.
    Practical you have to use a unicode CCMS Agent to monitor the ERRORLOG file of SQL2005, and add the "ENCODING=UTF-16" parameter in the template file....
    hope this helps..
    Regards
    Rolf

  • HT3702 how do I cancel an application that I am being billed for monthly that does not work

    How do I cancel an application that I am being billed for monthly that does not work anymore?

    How to report an issue with Your iTunes Store purchase
    iTunes Store: Purchasing and managing auto-renewing subscriptions

  • Quicktime plugin for screen capture does not work in flash player 11.2

    Hello,
                   I have created a quicktime plugin (it is .component file) for screen sharing purpose.
    I have used quicktime framework for that. plugin is detected in flash player.
    This plugin is working perfectly for flash player 11 and below.But,
    It does not working in latest flash player 11.2.
    I have seen following error on console -
    Google Chrome Helper EH[240:e92b] *** QTCaptureSession warning:
    Session received the following error while decompressing video:
    Error Domain=NSOSStatusErrorDomain Code=-8974
    "The operation couldn’t be completed. (OSStatus error -8974.)".
    Make sure that the formats of all video outputs are properly configured
    Note - Compression format used in plugin is kBMPCodecType.
    Please, help me.

    The issue ended up being the change in resolution to my external monitor. Flash was unable to detect the proper coordinates of the color I was trying to select because I was running my monitor in HD mode rather than selecting an actual resolution from my monitor preferences. Changing the settings to an acutal resolution, instead of generic "HD mode" fixed the issue.

  • Customer Exit variable and Filter routine in DTP does not works?

    Hello Experts,
    Does anyone know what might be the possible reason - A customer exit variable working fine on the OLAP side does not work in a DTP??
    I have also tried to use the Filter routine, which does not give me the right results..I am trying to fetch a Fiscalyear period maintained in an infoObject as follows in my Filter routine..
    ata: sel_period like /BIC/PZPARAM-/BIC/ZPARAMVAL.
    DATA: zperiod type /BI0/OIFISCPER.
              SELECT SINGLE /BIC/ZPARAMVAL INTO sel_period
              FROM /BIC/PZPARAM
              WHERE /BIC/ZPARAM = 'ZPCA'
              AND objvers = 'A'.
              zperiod = sel_period.
    data: l_idx like sy-tabix.
              read table l_t_range with key
                   fieldname = 'FISCPER'.
              l_idx = sy-tabix.
              l_t_range-iobjnm = '0FISCPER'.
              l_t_range-fieldname = 'FISCPER'.
              l_t_range-sign = 'I'.
              l_t_range-option = 'EQ'.
              l_t_range-low = zperiod.
              if l_idx <> 0.
                modify l_t_range index l_idx.
              else.
                append l_t_range.
              endif.
              p_subrc = 0.
    Please let me know if I am making any mistakes above..
    Kind Regards,
    Kadriks

    Hi
    1.  CLEAR l_t_range-high. is missing in your code befor assigning values to l_t_range.
    2. use simple append l_t_range after the l_t_range asisgnments. remove below code :
    if l_idx 0.
    modify l_t_range index l_idx.
    else.
    append l_t_range.
    endif.
    p_subrc = 0.
    3. I dont think you need to assign infoobject.
    4. Clear sel_period and zperiod is also missing
    Hence your code should be  :
    data: l_idx like sy-tabix.
    read table l_t_range with key
    fieldname = 'FISCPER'.
    CLEAR l_t_range-high.
    l_idx = sy-tabix.
    l_t_range-fieldname = 'FISCPER'.
    l_t_range-sign = 'I'.
    l_t_range-option = 'EQ'.
    l_t_range-low = zperiod.
    append l_t_range .

  • F4 help on Parameter for ddic domain does not work

    Hello,
    I try:
    Parameters:  pa_waers TYPE WAERS.
    WAERS is a ddic data element for currencies and also a  domain with this name exists. The domain WAERS has a check table TCURC.
    When I press F4 for my field PA_WAERS in the Selection Screen, I assume a value help from the check table TCURC.
    I activated and re-generated my coding (as mentioned in the ABAP-Keyword help for "PARAMETERS") but it still does not work.
    Does anybody has a clue why this does this not work.
    The same thing is for a parameter:
    Parameters ..... type CTU_MODE.
    Domain CTU_MODE has value Fields (A, E, B) but also here on my program no F4 help occurs.
    Thanks in advance
    Stefan Berger

    A value table is assigned to a domain.  It becomes a check table when a foreign key relationship is established for a field in a table.  The field uses the data element and the data element uses the domain.
    For example, if you try:
    PARAMETERS: PA_WAERS TYPE EKKO-WAERS.
    You will get the F4 help you are looking for.  If you use tran SE11 and view EKKO, find field WAERS, use tab Entry Help/check and you will see that table TCURC has been established as a check table.  You can use the foreign key button to see the relationship that has been established between EKKO and TCURC.
    Also, domains cannot be used to type a field.  Your reference to CTU_MODE must be referring to a Data Element.  I tried this in a 4.7 system and the F4 works for me.  What version are you using?

  • Roboform adapter even for latest Firefox does not work..

    I have tried all workaround given in this forum , but still roboform plugin does not work for latest version ( 24) does not work , it dsplay first time when you install FF , but next time it disappears. Any solution ?

    I have download roboform from here [http://www.roboform.com/ Roboform] and i have installed it on my laptop. at the end of installiation i see the roboform toolbar in firefox and it operates normally. try again See also [https://support.mozilla.org/it/questions/974226?esab=a&s=&r=8&as=s https://support.mozilla.org/it/questions/974226?esab=a&s=&r=8&as=s] You must remove your old toolbar before install the new version of roboform 7.9.2.5

  • Mapping Network Drive for external user does not work

    I want to map a beehiveonline.oracle.com network drive. I am using https://beehiveonline.oracle.com/content/dav/# as mentioned in the FAQ.
    Using https://beehiveonline.oracle.com/content/dav/ (without the #) does not work either.
    I am able to map this network drive when using [email protected] as user.
    However when trying to do this for the user [email protected] I am not able to map the drive.
    I am testing this in order to simulate the client to map the network drive.
    Logging on the beehiveonline with the user id [email protected] works fine.
    Your help will be greatly appreciated.

    Ah, We have had one other case of this where an account can access BeehiveOnline OK but cannot get the webDAV to work.
    I did notice a few login failuers stating your account did not exist on the system. This can sometimes happen if there is a conflict between username and loginid - I have set them to be the same and this may help.
    Try again and let me know how it goes.
    Phil

  • Voice Over for tracks & artist does not work

    My sister has just bought FOUR new iPod shuffles 4th gen, im busy trying to set them up for the kids before xmas - it turns out that the voice over for tracks and artists does NOT work even though its installed and the ONLY fix i can find is to MANUALLY apply ENGLISH (UK) language settings to each track after theyve been put on... now SURELY this isnt right...?
    can anyone help with thise?
    thanks

    Ok so the "is it plugged in" kind of troubleshooting question is...
    When you plug in the iPod, go to the summary page of the iPod, there is a check box to enable Voiceover on that iPod. Is that checked?
    Patrick

  • Search help for cost center does not work after SP upgrade

    Hi,
    Create a shopping cart in SRM and go to the cost assignment tab. When click on the search help to enter a costcenter, we don't get any search help screen.
    Thanks

    Kindly check note: 1259735 Search help of generic account does not work
    Additionally Check the 5th question/answer of note 815849.

  • Download link for PS CC does not work

    I am in the CC area, click on PS to download and the link does not work. Here is the link. Any ideas? Working on a Mac; browser is FireFox.
    Same issue occurs when trying to download AI from CC.
    aam://SAPCode=PHSP?productVersion=14.0?passPhrase=Qrm0F9IdGKvpaqBy+4xfM5lOVjrbpmIweKyRgE7A +BqIFujuZhd6TPbicQ26g2ENYDvavIaSUbhb9BXZi83+Angu3EOQc+ntLN6A+aQp/ewWvbhau5iP8ohOSLKpfNJlYT 4bEoGiRkVT1a3siLb7QGha/SK/mjCUPNQIynZDH7M=

    Hi maurak,
    Please use Creative cloud desktop app to download all CC Apps. You can download the CC desktop app from this link.
    https://creative.adobe.com/#products
    Regards,
    Abhijit

Maybe you are looking for

  • None of the resources are being displayed in ESS

    Hi Experts, i have created test user in ESS, when i click on EMPLOYEE SEARCH----> WHO IS WHO, I get a blank page, and data field is visible, i have maintained the infotype 0105 with subtype 0001 can someone help me to troubleshoot this issue, thank y

  • Illustrator CS2 - Setting DPI resolution on PDF export

    Hi, I'd like to know how to set the PDF output resolution in DPI in Illustrator? I use Save As to save as PDF, but I am sure it must be possible to choose this DPI setting somewhere... Thank you

  • Sending IDOCS

    We are sending IDOCs from R/3 to our suppliers thru XI. Would it be possible to collect the IDOCS that are created for the day and send it at a particular time/after particular count(Say 200) from R/3 to XI in one shot? If this is possible what exact

  • PS cc 2104 downloaded but all files under the help tab are inactive

    I downloaded CC and then PS and Bridge. The CC pane stated that both were downloaded correctly and I checked that they were 64 bit versions (working with a win 7 64 bit pc). The programmes appear to be working OK and interacting correctly with my pre

  • Object for Material Master in SNRO

    Hi Friends,                              My material and vendor master numbers are missing. So i want to make the buffer 0 in SNRO. can anybody convey object for material and vendor master in SNRO. please reply... REgards,