Filter in a query
I have a query in a calendar item where i'm using a filter. This is filtered by a select list item that submit the page. The thing is when the select list item is null, obviously the calendar item will be empty... But I don't want that, I want to show all the values without any filter... for example as the query would not have the where condition.
Thanks in advance
Regards, Bernardo
This is being made a whole lot more complicated than it needs to be:
WHERE NVL(:P36_PROTOCOL, PROTOCOL) = PROTOCOLEdit: Mind you -- this won't work if you have your select list has a value in the 'Null Return Value' field. At that point you'd either need to remove the value or use something like:
WHERE DECODE(:P36_PROTOCOL, '[value from Null Return Value]', PROTOCOL, :P36_PROTOCOL) = PROTOCOLEdited by: matthew_morris on Nov 15, 2012 3:00 PM
Similar Messages
-
How do I use the Parameters from URL to filter on Content Query in ItemStyle.xsl?
Hi, I might need your help with code that Content Query under <xsl:Template...> that I need a filter for 3 parameter from url (from date, to date(for date range) and type.
eg: www.mywebsite.com/pages/Filter.aspx?DateFrom=01/01/2012&DateTo=01/01/2013&Type=sports
I've google for help and not sure they seem working so far.Hi,
If you want to filter a Content Query Web Part with the parameters from URL, we can achieve it with OOTB of Content Query Web Part by adding "Additional Filters" in "Web Part Properties"->"Query". We can add
three filters like:
date is greater than [PageQueryString:DateFrom]
And
date is less than [PageQueryString:DateTo]
And
type is equal to [PageQueryString:Type]
Then redirect to the URL: www.mywebsite.com/pages/Filter.aspx?DateFrom=01/01/2012&DateTo=01/01/2013&Type=sports, the query results will be filtered.
Please reply freely if I misunderstand your meaning or there any other questions.
best regards
Patrick Liang
TechNet Community Support -
How to Create Filter by date Query for access using Data base connectivity tool
Hello,
I had started my project by reading Access datas, by using an UDL connection,
but now i want to create an access filter using a query that would permit to select two dates, and to obtain all corresponding datas, how to do it using the Parmetrized SQL query?
Best regards,
Remark: i dont know the SQL language
~~~~~~~~~~~~~~~~~~Looking for a LABVIEW JOB (In EUROPE)>~~~~~~~~~~~~~~~~~~
**The Best Way To Predict**The**Future Is To Invent It**
Solved!
Go to Solution.Hi mike,
I want to thank you for your help, i really appreciate it,
i tried to make the code as ur picture, i had no problem to execute it, but i have no data's in the output
i changed the date format, because i suppose that its a short date format in the database.
can you just look at it, and tell me if you can find the problem,
thank you again for your help
Best regards,
~~~~~~~~~~~~~~~~~~Looking for a LABVIEW JOB (In EUROPE)>~~~~~~~~~~~~~~~~~~
**The Best Way To Predict**The**Future Is To Invent It**
Attachments:
db.JPG 126 KB
lav.JPG 82 KB -
Another BW question about filter in the query definition
Hi ,
I have another question about filter in the query definition.
<u>Question:</u>
Which of the following objects can be filtered in the query definition?
A. characteristic
B. Key figure
C. Structure
D. Units
E. Hierarchy
My answer is A,B,D,E.
The answer in the book is A,B,D
Can anybody tell me which one is wrong?
Thanks in advance,
Liu JiaHI
1.The answer could be A,B,D.you can not apply filters on hierarchies
2.Whenever there is a change in Attribute data(like Location,Num etc...)that has to be reflected in all aggregates of the cube.Thsi can be done by running "ATTRIBUTE CHANGE RUN".
sri -
Unable to select the filter value after query execution
hi,
I am unable to drill down my keyfigures.
1.i have a lC and GC values out of which GC is hidden so after the query execution i would like to filter my value between GC and LC but i do get only LC value in the filter and i do not get GC value to select .
Could any one tell me how this can be done.this is very urgent.
Thx
Subharesolved on my own,so i am closing this.
Thx
Subha -
Using a Search Filter in a Query
Hello,
Version 4.1.1.00.23
I have Tabbed Form with a query that I want to set up a filter on.
The table has 5 columns that the user can select from the filter. All five columns contains a status id for that particular column. The columns are OVERALL_STATUS, SCOPE, SCHEDULE, RESOURCES, and EXTERNAL_READINESS. The values in these columns can be R, Y, or G to represent RED, YELLOW, or GREEN.
The requirement is to return the rows that only have a 'G' (Green) for the respective column.
The LOV for the filter contains a STATIC list to represent the columns from this table.
STATIC2:Overall Status;OVERALL_STATUS, Scope;SCOPE, Schedule;SCHEDULE, Resources;RESOURCES, External Readiness;EXTERNAL_READNESS
The query looks similar to this:
[code]
SELECT <column list>
FROM table
WHERE : Pxx_SEARCH = 'G'; (NOTE: I put a space between the colon and the Pxx because the window thought I tryng to make a smiley face)
[code]
This does not return any rows. I thought that when the query was resolved the substitution would be done, but I think that APEX it putting single quotes around the value. i.e. WHERE 'OVERALL_STATUS' = 'G'.
Can someone help how to fix this?
Please let me know if I'm not clear.
Thanks,
JoeThe :PxxSEARCH isn't a substitution but a value.
If I understand you correctly this may do it:
SELECT <column list>
FROM table
WHERE DECODE(:Pxx_SEARCH, 'OVERALL_STATUS',overall_status,
'SCOPE',scope,
'SCHEDULE',schedule,
'RESOURCES',resources,
'EXTERNAL_READINESS',external_readiness) = 'G'; -
RUN Time error while use filter table in query generator
Hai..
I have 2 Functions under "Scalar valued functions" in SQL Server,i try to call this functions in Query generator its working fine,result also display correctly, but i click filter table system showing Error Message " Run Time Error,Abnormal program termination" then SAP is get closed,i tested this scenario in 3 Database am getting same error , Is this BUG in SAP B1?There is no error number in error messageThis is my function
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
-- =============================================
-- Author: <Author,,Name>
-- Create date: <Create Date, ,>
-- Description: <Description, ,>
-- =============================================
ALTER function [dbo].[Get_TransObjName](@Obj_type NUMERIC(20,5))
returns varchar(500) as
BEGIN
DECLARE @Obj_type_Name varchar(100)
select @Obj_type_Name =
case @Obj_type
when -2 then 'Opening Balance'
when -3 then 'Closing Balance'
when 1 then 'oChartOfAccounts'
when 2 then 'oBusinessPartners'
when 3 then 'oBanks'
when 4 then 'oItems'
when 5 then 'oVatGroups'
when 6 then 'oPriceLists'
when 7 then 'oSpecialPrices'
when 8 then 'oItemProperties'
when 12 then 'oUsers'
when 13 then 'A/R Invoices'
when 14 then 'A/R Credit Memo'
when 15 then 'A/R DeliveryNotes'
when 16 then 'A/R Returns'
when 17 then 'oOrders'
when 18 then 'A/P Invoice'
when 19 then 'A/P Credit Memo'
when 20 then 'Goods Receipt PO'
when 21 then 'Goods Returns'
when 22 then 'PurchaseOrders'
when 23 then 'Quotations'
when 24 then 'IncomingPayments'
when 25 then 'Deposit'
when 28 then 'oJournalVouchers'
when 30 then 'JournalEntries'
when 31 then 'oStockTakings'
when 33 then 'oContacts'
when 36 then 'oCreditCards'
when 37 then 'oCurrencyCodes'
when 40 then 'oPaymentTermsTypes'
when 42 then 'oBankPages'
when 43 then 'oManufacturers'
when 46 then 'VendorPayments'
when 48 then 'oLandedCostsCodes'
when 49 then 'oShippingTypes'
when 50 then 'oLengthMeasures'
when 51 then 'oWeightMeasures'
when 52 then 'oItemGroups'
when 53 then 'oSalesPersons'
when 56 then 'oCustomsGroups'
when 57 then 'ChecksforPayment'
when 58 then 'Stock List'
when 59 then 'Goods Receipt'
when 60 then 'Goods Issue'
when 64 then 'oWarehouses'
when 65 then 'oCommissionGroups'
when 66 then 'oProductTrees'
when 67 then 'Inventory Transfers'
when 68 then 'oWorkOrders'
when 69 then 'Landed Costs'
when 70 then 'oCreditPaymentMethods'
when 71 then 'oCreditCardPayments'
when 73 then 'oAlternateCatNum'
when 76 then 'Postdated Deposit'
when 77 then 'oBudget'
when 78 then 'oBudgetDistribution'
when 81 then 'oMessages'
when 91 then 'oBudgetScenarios'
when 97 then 'oSalesOpportunities'
when 93 then 'oUserDefaultGroups'
when 101 then 'oSalesStages'
when 103 then 'oActivityTypes'
when 104 then 'oActivityLocations'
when 112 then 'oDrafts'
when 116 then 'oDeductionTaxHierarchies'
when 117 then 'oDeductionTaxGroups'
when 125 then 'oAdditionalExpenses'
when 126 then 'oSalesTaxAuthorities'
when 127 then 'oSalesTaxAuthoritiesTypes'
when 128 then 'oSalesTaxCodes'
when 134 then 'oQueryCategories'
when 138 then 'oFactoringIndicators'
when 140 then 'oPaymentsDrafts'
when 142 then 'oAccountSegmentations'
when 143 then 'oAccountSegmentationCategories'
when 144 then 'oWarehouseLocations'
when 145 then 'oForms1099'
when 146 then 'oInventoryCycles'
when 147 then 'oWizardPaymentMethods'
when 150 then 'oBPPriorities'
when 151 then 'oDunningLetters'
when 152 then 'oUserFields'
when 153 then 'oUserTables'
when 156 then 'oPickLists'
when 158 then 'oPaymentRunExport'
when 160 then 'oUserQueries'
when 162 then 'Inventory Valuation'
when 163 then 'oCorrectionPurchaseInvoice'
when 164 then 'oCorrectionPurchaseInvoiceReversal'
when 165 then 'oCorrectionInvoice'
when 166 then 'oCorrectionInvoiceReversal'
when 170 then 'oContractTemplates'
when 171 then 'oEmployeesInfo'
when 176 then 'oCustomerEquipmentCards'
when 178 then 'oWithholdingTaxCodes'
when 182 then 'oBillOfExchangeTransactions'
when 189 then 'oKnowledgeBaseSolutions'
when 190 then 'oServiceContracts'
when 191 then 'oServiceCalls'
when 193 then 'oUserKeys'
when 194 then 'oQueue'
when 198 then 'oSalesForecast'
when 200 then 'oTerritories'
when 201 then 'oIndustries'
when 202 then 'oProductionOrders'
when 203 then 'A/R Down Payment'
when 204 then 'A/P Down Payment'
when 205 then 'oPackagesTypes'
when 206 then 'oUserObjectsMD'
when 211 then 'oTeams'
when 212 then 'oRelationships'
when 214 then 'oUserPermissionTree'
when 217 then 'oActivityStatus'
when 218 then 'oChooseFromList'
when 219 then 'oFormattedSearches'
when 221 then 'oAttachments2'
when 223 then 'oUserLanguages'
when 224 then 'oMultiLanguageTranslations'
when 229 then 'oDynamicSystemStrings'
when 231 then 'oHouseBankAccounts'
when 247 then 'oBusinessPlaces'
when 250 then 'oLocalEra'
when 280 then 'oSalesTaxInvoice'
when 281 then 'oPurchaseTaxInvoice'
when 300 then 'BoRecordset'
when 305 then 'BoBridge'
when 260 then 'oNotaFiscalUsage'
when 258 then 'oNotaFiscalCFOP'
when 259 then 'oNotaFiscalCST'
when 261 then 'oClosingDateProcedure'
when 10 then 'oBusinessPartnerGroups'
when 278 then 'oBPFiscalRegistryID'
else cast(@Obj_type as char(20)) end
return @Obj_type_Name
END -
A filter value for Query is set with some value automatically
Hello SAP sourcing Guru!
I created a query which has several filters.
Some of Filter's type is VLV.
When I preview the query somehow the filter values are already set with some value even though I did not set the default value.
For example, filter name is Region and there are four regions: Asia, NA, Europe, and SA.
I want to select one of them from drop-down menu. But Asia was already selected when I clicked the preview button for the query. I want to see "Please Select" instead of Asia from drop-down menu. I did not select "Prefill value from cache" for the filter. I made the filter Optional only. I did not set Default Value either for the filter.
Any clues?
Thank you for your response in advance.Hi,
In the Default value field of the filter prompts, you need to mention the Class Reference ID of the corresponding field. E.g., if you have Contract document phase as a filter, then in that if you want to display a blank or none value, then you should use null:2016.
Similarly for vlv type, the system has a value 616. Hence if you want to display a None value insteead of Asia, use the following in the Default value field:
0:616:null.
The way to find the class reference ID is to goto the RG > Class Reference > Look for the field that you are attempting to default on.
Hope this helps,
Vikram -
How to Filter a filtered Query with in a single query
Hi all,
Thanks in advance , Below is the query
SELECT *
FROM
(SELECT MitarbeiterListe.IDMITARBEITERLISTE,
MITARBEITERLISTE.JAHR ,
MITARBEITERLISTE.mitarbeiter ,
FIRMA.FIRMA ,
Abteilung.Abteilung ,
MitarbeiterStatus.mitarbeiterstatus ,
MitarbeiterListe.OEVON ,
MitarbeiterListe.OEBIS ,
MitarbeiterListe.SAPPERSNR ,
MitarbeiterListe.EKPreis
||'.00' "MitarbeiterListe.EKPreis",
MitarbeiterListe.InfrastrukturkostenZuschlag
||'.00' "InfrastrukturkostenZuschlag",
MitarbeiterListe.VerwaltungskostenZuschlag*100
||'%' "VerwaltungskostenZuschlag",
MitarbeiterListe.Tagessatz ,
MitarbeiterListe.Arbeitsort ,
MitarbeiterListe.Titel ,
MitarbeiterListe.Bemerkung ,
BERECHTIGUNGEN.BENUTZERNAME
FROM Firma
INNER JOIN (Abteilung
INNER JOIN MitarbeiterListe
ON Abteilung.IDAbteilung = MitarbeiterListe.IDAbteilung
INNER JOIN MitarbeiterStatus
ON MitarbeiterListe.IDMITARBEITERSTATUS=MitarbeiterStatus.IDMITARBEITERSTATUS
INNER JOIN BERECHTIGUNGEN
ON MITARBEITERLISTE.IDBEARBEITER=BERECHTIGUNGEN.IDBENUTZER )
ON Firma.IDFirma = MitarbeiterListe.IDFirma
WHERE MitarbeiterListe.Jahr = :P9_SEL_JAHR
AND Abteilung.IDOE =
( SELECT IDOE FROM OE WHERE OE = :P9_SEL_OE AND JAHR = :P9_SEL_JAHR
) temp
Requirement is : we need to filter this query again based on column in select list . As using AND / OR operator we are not able to give desired result ..
As in our case we are filtering the above query based on :P9_SEL_JAHR and :P9_SEL_OE variables ther is further requirement that we can also filter the filtered given query based on column vaue so we can get the specific columns value through bind variables and can use OR operator between them .but the problem is coming on merging the columns where case with the given query ..
As for example if we use this afer the query
OR/AND
MitarbeiterStatus.mitarbeiterstatus = :P9_SL_MA_STAT OR
MitarbeiterListe.OEVON = :P9_SL_OEVON OR
MitarbeiterListe.OEBIS = :P9_SL_OEBIS OR
MitarbeiterListe.SAPPERSNR = :P9_SL_SAPPERNR
for the OR case the first query will be always true so it will not filter it baseed on column value and in case of AND the second query would return true ..so we would get filtered column value based on column bind varaible not the complete query result based on JAHR and OE bind variable.
any way to satisfy these two cases within a single query ..suggesstions are welcomed and would be truly appreciated.
Cheers
sachinNot certain I've fully understood your required logic without examples, but I think you just need to use brackets:
WHERE MitarbeiterListe.Jahr = :P9_SEL_JAHR
AND Abteilung.IDOE =
( SELECT IDOE FROM OE WHERE OE = :P9_SEL_OE AND JAHR = :P9_SEL_JAHR)
AND
MitarbeiterStatus.mitarbeiterstatus = :P9_SL_MA_STAT
OR MitarbeiterListe.OEVON = :P9_SL_OEVON
OR MitarbeiterListe.OEBIS = :P9_SL_OEBIS
OR MitarbeiterListe.SAPPERSNR = :P9_SL_SAPPERNR
) -
Filter condition in query designer
Hi Friends,
Can any one please tell me?
Query is done on Multiprovider (made of Cube 1 to Cube 6 ) and in query designer under filter tab i have seen
case 1:
1) Fiscal year variant F4
2) Cube 1
Questions:
1) what is the use of Fiscal year variant F4 in this case?
2) Field 1 is available in all 6 cubes. In report from which cube the data is retreived for this filed 1?
Next case 2:
Under filter condition
1) Fiscal year variant F4
2) Cube 1 and cube 2
Question: Field 1 is available in all six cubes. in report from which cube the data is retrevied for this field 1.
Thanks
TonyWe have a similar situation with three cubes. However, when we run the query in Q, the filter (restriction) works well and we get the output only from one cube.
When the query is moved to Production (transport), with same restrictions, the query is not getting restricted for one cube initially, but hitting all three cubes in the multi provider...and hence taking a much longer time to process..
Any ideas what could be going wrong (the query is on an aggregate level, for IP) -
BEx Analyser: how to add filter information in query output
Hello,
When query is executed in BEx Analyser, there are three buttons with additional info. But none of them shows the selections that were made when the report was executed (variable screen) and the "static" filters within the query definition. How can I solve this problem?
Thank you.
Kind regards,
DanijelaI have place static filter left to the table on row 115 and then I copy it to desired destination in VBA callback function.
(I also have filter values on row 65)
HTH.
BR
Ondrej
Sub SAPBEXRefresh(queryID As String, resultArea As Range)
If queryID = "DATA_PROVIDER_1" Then
j = 15
i = 115
While Sheet2.Cells(i, 6) <> ""
If Sheet2.Cells(i, 7) <> "Empty selection" And Sheet2.Cells(i, 7) <> "" Then
Sheet2.Cells(j, 6) = Sheet2.Cells(i, 6)
Sheet2.Cells(j, 7) = Sheet2.Cells(i, 7)
Sheet2.Cells(j, 6).Interior.Color = RGB(239, 246, 251)
Sheet2.Cells(j, 7).Interior.Color = RGB(239, 246, 251)
Sheet2.Cells(i, 6) = ""
Sheet2.Cells(i, 7) = ""
j = j + 1
End If
i = i + 1
Wend
k = 65
While Sheet2.Cells(k, 6) <> ""
If Sheet2.Cells(k, 7) <> "" And Sheet2.Cells(k, 7) <> "Prázdné vymezení" Then
Sheet2.Cells(j, 6) = Sheet2.Cells(k, 6)
Sheet2.Cells(j, 7) = Sheet2.Cells(k, 7)
Sheet2.Cells(j, 6).Interior.Color = RGB(213, 227, 242)
Sheet2.Cells(j, 7).Interior.Color = RGB(213, 227, 242)
j = j + 1
End If
Sheet2.Cells(k, 6) = ""
Sheet2.Cells(k, 7) = ""
k = k + 1
Wend
While j < 65
Sheet2.Cells(j, 6) = ""
Sheet2.Cells(j, 7) = ""
Sheet2.Cells(j, 6).Interior.Color = RGB(255, 255, 255)
Sheet2.Cells(j, 7).Interior.Color = RGB(255, 255, 255)
j = j + 1
Wend
End If
end sub -
Problem with report with filter from other query
Hi All,
I have some report with two queries:
1. First contain Date(1) converted to int (like 20140807). This query calculate Date as getdate minus number of day which I could define (for example -8 return getdate minus 8 days).
2. The second contain also Date(2) converted to int. I would like to add filter where Date(2) will be on the list from results in query 1. When I try do this I receive:
Database error: [Microsoft][ODBC SQL Server Driver][SQL Server]Statement(s) could not be prepared.. (IES 10901) (WIS 10901)
When I have changed number of days from -8 to -30 in query 1, query 2 return some records.
I do not know why it work sometimes, sometimes not.Sathish, but I use defined by me objects (today number + days) and (today number) in BO so I do not want to change it manually.
Arijit, the second query without any filters return records with Date(2) equal 20140715. When I add filter with Date(2) = returned data from query 1 (getdate minus 8 days) I receive error. I know that getdate minus 8 days return dates (20140807...20140801) so 20140715 is out of the range. In this case query should return blank page.
When I change query 1 from 8 to 30 days is working correctly because 20140715 is in this range. Maybe it help to help me
This is condition from query1:
WHERE
dbo_Date.DateID(1) BETWEEN year( ( cast(convert(varchar, dateadd(day,@Prompt('Enter the number of X days', 'N',,Mono,Free, Persistent),getdate()) , 102) as datetime) ) )*10000 + month(( cast(convert(varchar, dateadd(day,@Prompt('Enter the number of X days', 'N',,Mono,Free, Persistent),getdate()) , 102) as datetime) ))*100 + day( ( cast(convert(varchar, dateadd(day,@Prompt('Enter the number of X days', 'N',,Mono,Free, Persistent),getdate()) , 102) as datetime) ) ) AND year( getdate() )*10000 + month(getdate())*100 + day( getdate() )
but I use the same condition in other reports and it is work. -
Form Filter Based On Query Results
How can I create a filter on a form based on the results of a query.
i.e. The Query [ESS_City] looks at the form's field [Current_User] and generate a list of cities [City_ID] that I want to use to match the form [ESS_QUEUE] field [City_ID]
Query Name: [ESS_City]
Query Field: [City_ID]
Form name: [ESS_Queue]
Form Field to filter with: [City_ID]
Thank you,
Mark MatzkeI use criteria in my queries instead of filters.
I would have a combo in the header of the form to select City_ID. Use that combo as criteria in the query that feeds the form. Have an AfterUpdate event to refresh the form.
Build a little, test a little -
Selection of Filter Values for Query Execution -Only Values in InfoProvider
I created a query based on an ODS. For the query charateristic 0NFCAT_CODE a variable was created by me. To the time of query execution F4 shows all values available in the charateristic, but only values available in the ODS are expected.
The characteristic 0NFCAT_CODE is a reference characteristic to 0CAT_CODE. 0NFCAT_CODE is compounded with 0NFCAT_TYPE (reference to 0CAT_TYPE) and 0NFCAT_GRP (reference to 0CAT_GRP). All characteristics 0CAT_CODE, 0CAT_TYPE and 0CAT_GRP are set to Query Def. Filter Value Selection = Only Values in InfoProv and Query Execution Filter Val. Selectn = Only Values in InfoProvider.
Could anybody give me a help? Thanks in advance.Hi,
that is master data of 0NFCAT_CODE.
Regards,
San! -
Using the results of one Query in a workbook as a filter in another query
Hello!
I'd like to have one workbook which my users can execute and the result from one Query (e,g, Customer Account Number) will then be used as a filter in a second query (which would be from a different cube).
Can this be done?
Cheers.Hi,
As far as I understand your requirement, you want to pass the result of one query to another query as a filter.
Well you can do this, by Using Replacement Path Variable.
For e.g. you want to pass Values of Custmomer Account Number to another query. In the second query, create one variable on Customer Account Number with type Replacment Path. Here it will ask you to enter the name of the query from which you would like to take the values of Customer Account Number.
When you will run the second query , it will execute the first query from which you want to read the customer accoutn number in the back-end. And it willl display the output the second query as per the valeus of customer account number.
This will help.
- Jaimin -
Filter results in query depending on value radio button
Hi all,
I have a "y/n" radio button group along with other fields and when submitted, you should be able to see a certain column depending on what the user chooses.
For "y" all records should be displayed, where the column value is not null and for "n" only the records where the column value is null should be displayed.
I've tried with conditional display for the column, but still get the records where the value is null in my report for "y".
Can anyone help me fix this?
kind regards,
Cleo
Edited by: Cleopatra on Jan 27, 2011 11:56 AMWhat you want is
AND {CONDTION}
AND {CONDTION}
AND {COLUMN FILTER CONDITION}so it should be
WHERE
AND {CONDITION 1}
AND {CONDITION 2}
AND (
( :ITEM_NAME = 'Y' AND <COLUMN NAME> IS NOT NULL )
OR ( :ITEM_NAME = 'N' AND <COLUMN NAME> IS NULL )
)Hope you have understood the reason why the column filter have been made together into an additional clause , rather than adding them them directly.
If you are confused about the logical structure of the query, try forming them into a sentence which you would be explaining the requirement.
Maybe you are looking for
-
does any one know why i am unable to install itunes on windows 7
-
Looking for these keyboard shortcuts in FCP X
Looked through the FCP X keyboard shortcut list and looks like I must have missed it, but can anyone tell me: What's the keyboard shortcut for: [1] advancing forward or back in the timeline by the second rather than every 10 frames? [2] Rippling forw
-
Automation for Purchase Requisition to Purchase Order
Hello All, Can someone please give me some insight on how I go about automating the process for PR to PO? This a the new process being implemented in my company. I have very little experience in Procurement. Any help would be appreciated. Many Thanks
-
Hi, Can any one tell me in which table system storing planned order number and which numbers getting converted to purchase requisition. Your response is apprecited, Thanks Dipak
-
IPad shuts down when I open Facebook, articles on CNN, newspaper articles, various videos. Many thanks