Filter messages on delayed send timestamp

Hi,
Is there any way to create a cursor filter that excludes messages that have a delayed delivery date set? I tried with
Code:
<element xsi:type="FilterEntry">
<op>notExist</op>
<field>delayDeliveryUntil</field>
</element>
But that doesn't accomplish anything.
I'm using Groupwise 8.0.2.
Regards,
Maarten

Sorry, there is not a way.
The soonest it could be put in is the next
major release after GW2012.
Preston
>>> On Tuesday, May 22, 2012 at 9:56 AM,
mdirkse<[email protected]> wrote:
> Hi,
> Is there any way to create a cursor filter that excludes messages that
> have a delayed delivery date set? I tried with
>
>
> Code:
> ‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑ ‑‑‑
> <element xsi:type="FilterEntry">
> <op>notExist</op>
> <field>delayDeliveryUntil</field>
> </element>
> ‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑ ‑‑‑
>
>
> But that doesn't accomplish anything.
>
> I'm using Groupwise 8.0.2.
>
> Regards,
> Maarten

Similar Messages

Getting "Error in sieve filter" message with each incoming mail and cannot recieve or send mail to or from iCloud account apart from Apple emails!! Please help!

Since approx 7am GMT I've been getting "Error in sieve filter" message with each incoming mail, worse though, since about 12 noon I cannot recieve or send mail to or from my iCloud account apart from I've been getting emails from Apple (ie I've just received a welcome one from Apple Support Communities...)!! I've had this account for years, never had a problem - it can't be the OSX Mail server because the problem is the same when I log directly into iCloud. I've tried sending emails from my Hotmail account to my iCloud account (a .mac) and just get undeliverable messages back. I'm really in the s**t now at work. : ( I just set up a Smart TV yesterday with a wireless dongle - that's the only thing I've done out of the ordinary. I've spoken to Sky who are my ISP and they say all's fine with them (although the router kept kicking my off the internet this morning which was strange...). Router seems fine now though. I'm really hoping someone here can help!!
Many thanks!!

Do you think once Apple sort this out I'll get my missing emails back?

When using Verizon message +; is there a setting for delaying sending text message?

I switched from GO SMS Pro to Verizon message +. However, I liked the ability to delay sending the text (in case of bad finger). I have not found a setting to delay sending. Has anyone found a way?

prr284
I understand how important it is to have the feature you need from your messaging service! At this time, there is not a way to set up a delayed message from Verizon Messages. I'm sorry about any inconvenience this causes! I can lift this up as a suggestion for improvement. Thanks for the idea!
RuthW_VZW
Follow us on twitter @VZWSupport

Mail - Delay sending of a composed message

Hi,
I wanted to know if there is a way in Apple mail which will delay sending mail for some time. Say I have composed a message today but I want to send that email tomorrow afternoon. Is there some way or some plugin with which I can do this ?
Thanks

I think you are looking for more of an auto-send, than what the previous user suggested. I am not sure if Mac can do this, but if you Google "send e-mail at specific time", there are many programs that will allow you to do this. I know that some of them will interface with Outlook, and Entourage, so if you are sending the Mac e-mail through Entourage, you should be able to find the right free software.
FYI. There are also services that allow you to do this with a text.

HT2488 How do I create an iCal Alarm to delay send an e-mail in my Drafts folder of Mail?

I've learned how to use iCal Alarm to schedule sending an e-mail. However, all of the instructions I read say that I have to type the e-mail inside the automator's "New Mail Message". Is there a way to type the message in Mail, save it in drafts, and then create an iCal Alarm to schedule sending it?
I got as far as "Get Specified Mail Items" --> "Display Mail Messages". This sequence displayed a message in Drafts. What next to get it to send that message it displayed? I tried adding "Send Outgoing Message" to the sequence with no success. And I tried adding "New Mail Message" --> "Send Outgoing Message" to the sequence with no success.
Sometimes there will be several e-mails I want to delay send (some that I started earlier in the day, saved in Drafts and finished up in the wee hours of the morning) and it seems a waste to have to create a new iCal Alarm for each.
Thank you!

I've learned how to use iCal Alarm to schedule sending an e-mail. However, all of the instructions I read say that I have to type the e-mail inside the automator's "New Mail Message". Is there a way to type the message in Mail, save it in drafts, and then create an iCal Alarm to schedule sending it?
I got as far as "Get Specified Mail Items" --> "Display Mail Messages". This sequence displayed a message in Drafts. What next to get it to send that message it displayed? I tried adding "Send Outgoing Message" to the sequence with no success. And I tried adding "New Mail Message" --> "Send Outgoing Message" to the sequence with no success.
Sometimes there will be several e-mails I want to delay send (some that I started earlier in the day, saved in Drafts and finished up in the wee hours of the morning) and it seems a waste to have to create a new iCal Alarm for each.
Thank you!

How to filter messages in XI (IE) using Payload value

Hi XI/PI experts,
I just would like to ask if there is a way in filtering messages using only a value in the payload?
In SAP R/3 system, we can use we09 for searching. In XI, do we have any transaction that can substitute the transaction we09?
This is because, when a message is coming from JMS or File adapter, there is no means of filtering it via IDoc number. We can only filter it using sxi_monitor (via Interface/Receiver/Sender). However, if I am looking for a particular Order/delivery, it is hard to find this because I have to open one by one the messages and then look into the payload.
I hope there is an easier way to filter messages per field value.
Thanks in advance.

Hy Mary !
        One solution is using TRex to index the XML messages processed by XI, like mentioned in the above messages, and another way is to write a ABAP program to make this work.
        You can find a sample ABAP code to do this at this link:
http://209.85.215.104/search?q=cache:JOwoNxe-F-0J:searchsap.techtarget.com/tip/0,289483,sid21_gci1273424,00.html+IF_XMS_MESSAGE&hl=pt-BR&ct=clnk&cd=3&gl=br
        It´s very useful. I did take this sample and did make some adjustements(add more filtering parameters, etc) and created another program, that will be used in the customer where I´m working now. I think that this solution is not so fast than using the indexes of TRex but, it works well, and doesn´t require license nor server/infrastructure to install a TRex. Maybe you have to consider TRex, if the message processing volume at your site is very big, something like more than 50.000 messages/hour.
        I hope that this link helps you !
        Best regards,
        Wilson

Emails sitting in Outbox - delay sending being set to 17:00 by default

I am using Outlook and Exchange 2010 on a SBS server, emails from two users are not being sent, i.e they are sitting in the Outbox. On closer inspection
the delay sending time is set to 17:00. If this is removed the email goes. I believe this is a problem with a corrupt 'normal.dotx' file but if the template is replaced Outlook replaces it with the corrupt one. In the meantime I have created a new message
template with the delay time set to 00:00 and used a macro to display it and it works fine. Is there a fix for this problem?

Hi,
From your description, emails from two users are sitting in the Outbox and not being sent when the delay sending time is set to 17:00.
Delay or schedule sending email messages is an Outlook feature. Actually, we have a dedicated support team regarding the Microsoft Office Outlook. I recommend you ask your question on our Outlook forum which is staffed by more experts specializing in this
kind of problems. Thanks for your understanding.
Hope it helps.
Best regards,
Amy Wang
TechNet Community Support

Delaying sending email

Does anyone know a way to adjust the time on sending an email in Mail 2.1 ? For instance you may want to delay sending for two hours or perhaps the next day. Other than saving as a draft?

Check this link for a collection of AppleScripts called Mail Scripts.
http://homepage.mac.com/aamann/Mail_Scripts.html
The script to use from the collection of scripts is Schedule Delivery (Mail) which allows you to send individual messages at predefined times (this script uses iCal for scheduling message delivery).

Timed out while sending ... message may be send more than once

Hi,
I regular have complaints from some clients receiving my emails 10 -15 times in their mailbox.
When checking the maillog I always see : timed out while sending ... message may be send more than once. See below
Problem can happen at any time, even when there is just 1 person connected to the server, so I rule out overload.
95% of mails send arrive without problem.
When looking the dns mx info of these clients I am having problem with, all have multiple (round-robin ?) mx-hosts (eg mx.mailprotect.be).
Is someone else having these problems ?
gr
Fonny
Nov 20 14:05:05 osxserver postfix/smtp[33385]: 3846CBE9FFC7: conversation with monitor.estrel.com[62.154.155.69] timed out while sending end of data -- message may be sent more than once
Nov 20 14:15:48 osxserver postfix/smtp[33385]: 3846CBE9FFC7: to=<[email protected]>, relay=mx-30.startplus.de[62.154.155.70]:25, delay=1826, delays=486/0.01/716/623, dsn=4.4.2, status=deferred (conversation with mx-30.startplus.de[62.154.155.70] timed out while sending end of data -- message may be sent more than once)
Nov 20 14:15:48 osxserver postfix/smtp[33385]: 3846CBE9FFC7: to=<[email protected]>, relay=mx-30.startplus.de[62.154.155.70]:25, delay=1826, delays=486/0.01/716/623, dsn=4.4.2, status=deferred (conversation with mx-30.startplus.de[62.154.155.70] timed out while sending end of data -- message may be sent more than once)
Nov 20 14:27:06 osxserver postfix/smtp[34737]: 6F586BEA0F09: lost connection with mx1.hotmail.com[65.55.92.136] while sending end of data -- message may be sent more than once

It means that Cyrus IMAP is not responding or ready to deliver mail (at least temporarily). Most likely reason is that there are too many connections/users.

Issues with Messages: Unable to Send or Receive on MacBook Air

Greetings,
My girlfriend recently purchased a 11.6-inch MacBook Air (1.4GHz Dual-core Intel Core i5) and is running OS X 10.10.1. Messages will not send or receive any messages (including SMS and MSM through the iOS/OS integration).
She has tried all of the steps before mentioned (from logging out of iMessage to reformatting the hard drive and reinstalling OS X). Nothing has worked.
Any suggestions?

HI,
Sorry about the delay (Christmas Party)
In that case check the following:- (follow each of these for with a Restart of the app)
That the System Preferences > Date and Time are set including the Automatic Time Server an Time Zone setting.
That the System Preferences > Network > Advanced Button >DNS tab lists at least two servers that are not the same IP as the "router IP" shown in the TCP/IP tab. Use Public ones if required http://pcsupport.about.com/od/tipstricks/a/free-public-dns-servers.htm
If the Messages App > Preferences > Accounts shows the Apple ID that is in use, the "Receive At" options and any "Start Conversations From" drop down and that the iMessages account is Enabled then click the Details Button (she will be required to sign in here)
Check the Country Code is correct for her location. (it lists the country or region which add a Country Code to the listed iPhone Numbers in the Contacts app unless they already exists like out of country ones already would).
In the Contacts App check the My Card (Card Menu) is the correct details.
In Applications/Utilities open the Keychain Access app.
With Login set top left and Passwords lower left find the item ids: message-protection-public-data-registered and delete it.
7:26 pm Saturday; December 20, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

How to forward e-mail messages based on sender's OU?

Hey guys,
In Exchange 2010, I'm trying to forward every e-mail from X sender to the corresponding department. In order to do this, I have to get that user's OU and then send it to [email protected]
I already have all the mailboxes created, I just need to know how to add a rule that looks at a sender's OU and forwards the message to the right e-mail address.
Many thanks in advance!
Best,
Alex

Hi,
I'm afraid we can't create a transport rule to filter user based on the user's OU.
To work around this issue, you can use the following command to get the organizational unit first, then you find the right e-mail address which you want to forward to. After that, you can create a transport rule to forward these messages from X sender to
this specific email address.
Get-Mailbox -Identity mailbox | fl Name, OrganizationalUnit
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Delayed Send of Appointments - Exchange Server- Outlook 2010

We use Exchange Server and when we try to delay the send of an appointment set up in Outlook 2010, the invite is sent immediately. We can delay send an email.
Any suggestions would be greatly appreciated.
Sheila

Hi Sheila,
You can use Outlook rule to delay send of appointments:
Apply this rule after I send the message
Which is a meeting invitation or update
Defer delivery by
a number of minutes
Thanks,
Evan

Need to notify IT if a message is delayed

Hi,
In the Exchange ECP you can go to the server and then transport limits. Here you can set the option to notify the sender if a message is delayed, we do so after 1 hour. IT also needs to be notified if their is a delay to any messages how can
I do this? Is there a way IT can be notified when the queue is backed up because we need to take measures sometimes usually one message is stuck in the queue and hanging stuff up.

You can run scripts at regular intervals to find out if the queues are piling up and you can set a threshold like if the total number of messages in the queue are beyond 50, send an email to the team mentioning the queue name and the server on which it is
stuck with the status of the queue.
A script is here
http://gallery.technet.microsoft.com/office/e0bb250e-e699-4c6c-a5be-f1af245a2219
You can keep running this through a scheduled task once every 10 minutes and send an email to IT as and when threshold is reached.

Regarding text messaging, if I send a message from my iPhone, the reply goes to my ipad, or mini ipad. How can I fix this?

Regarding text messaging, if I send a message from my iPhone, the reply goes to my ipad, or mini ipad. How can I stop this from happening?

Go to Settings/ Messaging/ Send & Receive on each device to set the contact points to be reached at, and to set the "from" address when you start a new message. It sounds like your iPhone might be sending messages out as one thing (e.g. an iCloud address) but set to not receive replies only to your phone number. Make sure you review settings on each device since you may, or may not, want to have them common.

I have a brand new iPad newest version. Wifi. The messaging won't send out but I receive messages from others. What is wrong?

I have the newest version of the iPad (3rd generation) with wifi. The messaging won't send out but I'm receiving messages from others when I'm using it. They also come through on my iphone at the same time. But I can't send them out on the iPad. I tried someone's suggestion of changing the DNS to 8.8.8.8 and that did not work to fix it. What is wrong with this thing? Thank you in advance for your help.

Are you trying to send a message to a cell number or an email address? iPad does MMS, not SMS, meaning it can't send a message to a number. It can send a message to an email address........

Filter messages on delayed send timestamp

Similar Messages

Maybe you are looking for