Filter plugin not loaded everytime

Hi,
I am currently writing a filter Plug-in for Photoshop but I'm having an issue and can't find any clue of what is causing it.
My plugin is sometimes loaded by photoshop and sometimes not. When it is not, deleting the 8bf file and doing a rebuild of the project works, without modifying anything in the code. Sometimes I have to rebuild many times until the plugin gets loaded, which is anoying...
First I checked that the sdk version in the .r file was correct: Version { (latestFilterVersion << 16 ) | latestFilterSubVersion }, the entry point is the same as in the dissolve example.
I thought that photoshop may cache the plugins to load them faster and that the new version isn't seen (like when I build many times a minute), but I figured out that when a plugin is loaded once, it is always recognized.
One thing that I've noticed is that when my plugin is loaded, if I go to Help > System Info..., there is no version number for my plugin, that may cause the issue but I can't find in the dissolve example where this version 13 comes from. I thought as well that maybe the resource isn't compiled correctly sometimes but it is strange and unlikely I think (maybe still worth mentionning).
Does anybody have any clue / suggestion? It's been 2 days that I'm trying to figure out what's going on and it starts to drive me crazy...

Hi
Are you developing for Windows or Mac?
I had a similar problem with Windows. I found I wasn't compiling the correct pipl files (my .rc file wasn't including the correct pipl files). Tidy up/delete any pipl files and make sure 100% you're including correct pipl files.
I also had a problem when switching between 32/64 bit builds. For example, when compiling a 64 bit plug-in, VS2010 would sometimes not force a rebuild for the .r file (to generate .pipl for 64 bit) and would then include the 32 bit pipl (leftover from the 32 bit build). This meant that my plugin wouldn't appear in 64 bit Photoshop (because the pipl was invalid). For me the solution is to either delete any old pipl files before compiling, or being mindful to do a rebuild of pipl files when switching from 32/64 bit builds. I could also have created separate pipl builds for 32/64 bit and made sure correct one was being included.
When the plug-in doesn't appear in Photoshop, eliminate all the obvious bits (like plug-in paths), check your DLL exports, then check the pipl. I don't think it's the version number, but someone with more experience than me might point you in a better direction.
Jamie

Similar Messages

I get the "Fast Browser Plugin not loaded" message every time i run safari and I can't find an MTWB folder anywhere on my hard drive?

I get the "Fast Browser Plugin not loaded" message every time I run Safari and I can't find an MTWB folder anywhere on my hard drive? This doesn't seem to be causing a problem, but is a puzzle?

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a few minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"[$((l-25)) more line(s)]"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/(\/Users\/)[^/]+/\1-/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed -n 's/^ *//;5p;6p;8p'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps "Model"; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]|0[^2]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in FireWire Thunderbolt USB; do o=`SP $b | sed -En '/:$/{s/ *:$//;x;s/\n//;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};/Apple|Genesy|Intel|SMSC/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; fdesetup status | grep -q On && o=on || o=; Ps "FileVault"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n\t* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caug|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN' -k Message Ane 'SMC:' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|openld|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | egrep -v 'com\.apple\.(CSConfig|server)' | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; [[ "$b" && "$l" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do test -f "$d/Info.plist" || continue; ID=$($PB\ :CFBundleIdentifier "$_") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Extrinsic shared libraries"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Inserted dylibs"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^$.+$ //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{printf "not "; exit}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print $3}'`; Ps "Netmask"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc "hosts" <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "Application check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

PlugIn not loading Acrobat 8

Hi,
We migrated old version(Ver 7) plug in to Version 8 using 8 SDK libraries and VS2005.On development box it's working fine according to our requirements, but the same plug in file is copied to plug_ins folder of other machine having acrobat 8 but the plug in is not loading.
please give some solution.
Thanks

Compiled in debug and release mode.
But i took the release version to copy to other machine.
First step is to make work in other system having acrobat professional edition..
Then our final goal is to distrubute this PlugIn to external users.
Users may use any edition like professional ,reader or standard.
After completion of first step then we will do reader enable.
Both(debug and release) are working fine in development machine having Acobat 8 and VS2008.
Thanks,

CS4 plugin not loaded

Since CS4, I get a notice that a few plugins aren't being loaded and I
checked the system log, but it doesn't tell me which ones are not compatible
or not loaded... Anyway to tell which ones are not?
Jeff

Locate the plug-in in the Finder, highlight its icon and do a Get Info (Command+I). The Info box should tell you whether it's a Universal or PowerPC plug-in. PowerPC plug-ins will only run if you can run Photoshop in Rosetta emulation. Universal plug-in run native on MacIntel machines.
<br />
<br />c
<a href="http://www.pixentral.com/show.php?picture=1Qb6FtW1bXRwI1uP2TmMqSi3Mf39O0" /></a>
<img alt="Picture hosted by Pixentral" src="http://www.pixentral.com/hosted/1Qb6FtW1bXRwI1uP2TmMqSi3Mf39O0_thumb.jpg" border="0" />

IDCS5 Mac - release plugin not loading

I have several "release version" plugins that are not loading on my CS5 Mac machine.
The Porting Guide says that if the folder is inconsistently named with the plugin or if a resource file is missing, the plugin will not load.
I carefully checked the package and the folder is named the same as the app file (with the exception that the folder also has ".InDesignPlugin" added to its name--I am assuming that variation is acceptable).
I checked the folders and the files in the folders between the debug version and the release version. With one exception the release resource folder mirrors the debug resource folder. That difference is in the presence of a single file: timestamp.
Where does it come from and how can I get my release version project to generate one?
Are there other possibilities I should look into?
TIA!
R,
John

Dirk:
You correctly guessed the problem. Actually, what was happening was that I was using MySQL in both plugins. Because I was developing on my computer, I of course had the MySQL libraries loaded, but the production computers had the wrong libraries installed. With the help of a colleague (Dan Morris deserves this credit) the above fact was discovered. I dropped back a couple of versions in the libraries I was using, recompiled, and the problem was resolved.
Take care,
John

E71 local search plugins not loading since firmwar...

Has anybody else encountered the problem?
all that is showing up in the search app is the web search end the search on the mobile itself.
the plugins with the local (yellowpages...phone book.... ) information based on the region you provide are not loading.
before the firmware update local search was available.
I also notice search is no longer available for download from the nokia site (broken links)..
Please help.

this probably is a case of a bug in ur device so what u can try are: plz make a back up
take out your sim card and put in *#7780# to restore factory settings. you should not lose any data, but all settings will go into default. try that first.
the second option is a reset *#7370# this one will erase all of your data, 'wipe the phone clean' and restore to factory settings. see if any of these options work and if you are able to use your phone as you like/need to.
the third option U can go in for a hard reset which will turn ur device as it left the factory totally new
U can also update/reinstall ur firmware and see the result...
Also use ur device without the memory card and see
in case of ur memory card there are different options available to you to get rid of the corrupt/unwanted data in your card.
menu--tools--memory---options---format memory card......
remember everything including ur factory installed apps will be deleted......... but u can always download them later either from nokia or google them...
or insert ur card in any reader or laptop and check for virus and also the hidden folders.......
Articles posted courtesy engadget
keep us updated about the progress.... if u like wat I have to offer then click on khudos.

Java plugin not loading in Firefox 4.0b11, works fine in 3.6.13

Java plugin isn't loading in Firefox 4.0b11, but it works fine in 3.6.13 (and in Google Chrome too). It worked in Firefox 4 before, but broke somewhere around beta 5. libnpjp2.so is not really in the plugins folder, but is a symlink: /usr/lib/mozilla/plugins/libnpjp2.so -> /usr/lib/jvm/ia32-java-6-sun-1.6.0.12/jre/lib/i386/libnpjp2.so. When run from the command line, I see FF trying to load the other symlinked plugins (most totem related) but failing because they are amd64, and FF is built in 32bit. But no messages about libnpjp2.so (which IS 32bit).

this method works for Firefox 4.0 b11..!! [http://www.oracle.com/technetwork/java/javase/manual-plugin-install-linux-136395.html Manually install java plugin....]

Safari 3.0.4: Plugin-not-loaded alert window

Immediately after updating to Safari 3.0.4 on my G5 Mac,OS 10.4.11, I got this alert with one of the first pages I opened and from time to time, other URLs as well:
"Safari 3.0.4 (v523.12) has not been tested with the plugin (null) (null) (v0.62). As a precaution, it has not been loaded. Please contact the plugin developer for further information."
Certainly doesn't tell me what plugin or developer in any understandable way that allows me to do something about it, does it?
One page I opened that brought me that alert was this one: www.xraymag.com/

That mysterious plug-in ((null)(null)(v0.62)) is Acid Search.
This is probably installed under Macintosh HD > Library > Application Support > SIMBL > Plugins > AcidSearch.bundle. If you simply remove this, Safari should be happy. (If you installed it somewhere else, then just use Spotlight to find AcidSearch.bundle.)
There is a new BETA version (0.7b4) of Acid Search from www.pozytron.com that avoids this error message. This version was just released yesterday, and works great for me!

IDCS5 Mac - release plugin not loading (reprise)

I have ten plugins that have been converted from CS4 to CS5 on the Mac (Snow Leopard, if it matters). Out of those ten, two act fishy. The other eight are fine.
About the two fishy plugins. They show up in the Windows dropdown (they are palettes and belong there) in the release version in my computer, but if I take those same two plugins (I mean the "physical" same two packages) out onto a production Mac, they do not show up in the Windows dropdown. For kicks, I grabbed the non-functioning plugins from off of the production Mac (the same two "physical" plugins) and placed them on my computer and they showed up without a problem.
Are there any development difficulties associated with CS5 and Snow Leopard that anyone knows about?
Has anyone else had this kind of difficulty and if you did, how did you resolve the problem?
TIA!
John

Dirk:
You correctly guessed the problem. Actually, what was happening was that I was using MySQL in both plugins. Because I was developing on my computer, I of course had the MySQL libraries loaded, but the production computers had the wrong libraries installed. With the help of a colleague (Dan Morris deserves this credit) the above fact was discovered. I dropped back a couple of versions in the libraries I was using, recompiled, and the problem was resolved.
Take care,
John

Firefox flash plugin not loading external xml file?

I have a Flash based website that uses an external xml file
to load the interface and navigation. When I view the site in
Firefox it never seems to load the xml file therefore the interface
doesn't load.
Any ideas?

Hi,
I have followed your instructions and could able to get it working for firefox. The sameway i tried with mozilla, but not working. This time, I didnt see any errors but it is not working as expected (no animations / images displayed)
So could you please help me.
My system config. is X86 Solaris 5.10.
bash-3.00# pwd
/usr/sfw/lib/mozilla/plugins
bash-3.00# elfdump -e libflashplayer.so
ELF Header
ei_magic:   { 0x7f, E, L, F }
ei_class:   ELFCLASS32          ei_data:      ELFDATA2LSB
e_machine: EM_386              e_version:    EV_CURRENT
e_type:     ET_DYN
e_flags:                     0
e_entry:                  0x94 e_ehsize:     52 e_shstrndx:   37
e_shoff:              0x7fb4ac e_shentsize: 40 e_shnum:      39
e_phoff:                  0x34 e_phentsize: 32 e_phnum:       3Thanks
Ram.

Shockwave Flash Plugin not loading properly in Safari 1.3.2

Lately, I've been getting a message in Safari that it attempts to load the Shockwave Flash plugin in, but it's unsuccessful. I think that I've done just about everything possible to corect the problem (uninstalling, installing, fixing permissions, manually deleting associated files...).
Thanks in advance for any advice.

Thanks for the reply.
The Flash media box is indeed unchecked in the QT Sys. pref.'s. And I have IE 5.2.3 installed but never use it. And what's the strangest of all, is that booting up as another user on the same computer, Flash works fine (same sites, same software, etc.). The account that I'm having the problem with is the admin account. The one that works is set up as a Standard account. I've also tried reinstalling it from Macromedia's website, and I simply get an error message stating that I do not have sufficient access (while I'm signed in as Admin. The other account (standard access) allows the install to run smoothly, and as I said above, it works seamlessly.
Thanks again for any insights.
best

Audio Plugins not loading

I have a plugin suite that loads fine in all my other audio programs (Ableton Live, Fission, Amadeaus, etc...) This is the only plugin set I have that use the eLicenser dongle and the only plugins that won't load in Audition. I'm on a Macbook Pro Retina with latest Mountain Lion installed.
Here is a screenshot of my plugins window: http://note.io/VdQfdt
Here is the log entry from /var/log/system.log when I click reload on one of the plugins:
Dec 30 18:09:34 mike.local DVAAudioFilterScan[10925]: BeginScanForPlugins
Dec 30 18:09:34 mike.local DVAAudioFilterScan[10925]: terminated unexpectedly
And yes, the dongle is plugged in and verified working using Ableton Live.
-Mike
Computer info:
OSX 10.8.2
2.6 GHz Intel Core i7
16GB 1600 MHz DDR3 RAM

Parabuzzle,
Try installing Java for Mountain Lion. (http://support.apple.com/kb/DL1572?viewlocale=en_US&locale=en_US)
Then re-install the problem plug-ins.
Then click on re-scan existing plug-ins and scan again. Let us know back here if that helps.
-Matt

Plugins not load in firefox

Hello
I have weird problem in firefox, It's no loading its plugins when it load.
If I installed them again and restart Firefox, they appear with the same special configuration that I configure before, but they disappear again when today I open Firefox.
What's the problem?

AVG 9.0 is installed and the video (Flash in Flowplayer) works with IE 9 and Chrome.
Flash video works in Firefox, but not all Flash files. Flash in Firefox works with YouTube, Adobe's Flash website, and various other places, but not everywhere.
2 URL's are supplied above that contain Flash content that does not work with my Windows 7 (64-bit) Intel Core i7 Toshiba laptop with NVIDIA GeForce graphics card.
On the Flowplayer website -- someone who should know how to properly implement their player with Flash -- Flash does work with Firefox when HTTP and no streaming are used. However, nobody seems to note that this does not work for RTMP streaming.
So, Flash works -- sometimes -- but not all the time. However, the VERY same Flash files DO work on SAME laptop with SAME firewall and no problems with IE 9 and Chrome. Bottom line: RTMP streaming seems to be the issue with Firefox as pointed out on the following website:
http://flowplayer.org/setup/index.html
Attached images:
1. HTTP Streaming
2. RTMP Streaming - Faulty
3. No Streaming
NOTE: Website states, "RTMP The most advanced video streaming technology today."
The following 2 videos will not work with my Firefox:
http://www.3xconversionformula.com/replay/short -- uses Flowplayer as its Flash player.
http://www.schedulicity.com/Essentials/Video-Gallery.aspx -- uses Brightcove as its Flash player.
YouTube works. Also, the Brightcove website itself does work. So, its the implementation of Flash players -- not Flash itself -- that seems to be the problem. However, its not a problem with old versions of Firefox, nor IE 9 or Chrome.

Internet Plugins Not Loading

Hello,
I am running 10.6 with all recent updates. Currently none of my browsers are loading any of my internet plugins. I have Chrome, Firefox, and Safari installed and all of them have the same exact behavior. For instance, when I go to load any website with flash, it will redirect me to flash's website to download flash. If I download and install flash, then try to go back to the original website, it still tells me that I need flash.
This is the issue with ALL of my internet plugins.
I ran a repair permissions on the disk and also verified the disks integrity, and when i ran the repair permissions, it said that it was fixing a lot of permissions on the the Internet Plugins folder located in the library folder, but after a reboot, the problem still persists!
Any ideas

lots of permissions errors on the Internet Plugins folder? what have you done with your system recently? any new software, updates, anything? in any case I would reinstall the contents of the folder /Library/internet plugins from the SL install DVD using pacifist http://www.charlessoft.com/
then reinstall 10.6.2 update to bring everything up to the current versions. see if plugins start working after that?

Eclipse Plugins not loading

I'm on a freshly installed 64bit Arch. I installed eclipse with pacman and eclipse-wtp / eclipse-checkstyle from AUR. But they're both not showing up.
[user@host ~]$ ls /usr/share/eclipse/dropins/
checkstyle emf gef wtp
On my previous Arch installation (32bit), it worked.
Do I somehow have to enable the plugins? Is something broken?
Last edited by danilo (2011-12-02 15:27:20)

What worked 4 me:
pacman -S eclipse eclipse-cdt
Go to the eclipse website and download the latest package. Extract it.
sudo rm -r /usr/share/eclipse
sudo mv $DIR_WHERE_EXTRACTED_ECLIPSE /usr/share/eclipse
Not sure what's going on here but the latest trend in software is all about monkey business Luckily I know a little bit about monkeys jumping on the bed...
"Momma called the doctor and the doctor said.... 'This release is %&*^$@, use the stock one in its stead!'"

Filter plugin not loaded everytime

Similar Messages

Maybe you are looking for