Filters Issue - urgent please!!
Hello Experts,
After checking the DBA guide, I did not find a limit for the number of filter rows that can be inside one filter nor the number of filters a group can have assigned to it (assuming more than one database).
For instance, I have several filters on one database based off a large dimension with approximately 75 "read @IDESC("member")" and I wanted to know what the actual limit on filter rows are since 75 might be approaching that number (we normally have one or two rows).
Also, in a related question, what is the maximum total number of filters (e.g., databases) that a group can have assigned to it? That is, if I have one filter like the above for N databases, and I assign them all to one group for filter access, what's the maximum number than N can represent?
Please suggest.
Thank You,
Sonu
I just went digging through the API and I don't see anything specific about limiting how many filters you can have. I would guess that the limit isn't strictly defined, however, the more you have the more processing has to be done on them. If there is some sort of limit I'd think maybe it's a power of 2 (like 128 or 256). If you want to check, maybe you can setup a quick filter-granting script that creates a hundred or two hundred filters and sees if the system takes it. Of course, hopefully there'd be a better way to dole out permissions than this -- like using a UDA or the DESCENDANTS of some member or something.
Jason Jones
[jasons hyperion blog|http://www.jasonwjones.com]
Edited by: Jason Jones on Jan 23, 2009 11:30 AM
Similar Messages
-
0P_FYEAR issue - Urgent - Please help
Hi,
We are developing six new BCS queries. We have already have about 30 reports.
1. We are using the Fiscal Year variable (0FISCYEAR) - 0P_FYEAR in most of the queries. In the new reports, particularly in one query, the previous year is not working with -1 offset value. but, the same variable is working in other new reports for previous year. Please help how to rectify the issue.
2. I have started trying many options in QA environment and found that there was a option to choose CONSTANT SELECTION in the 0FISCYEAR. So, I tried to select the Constant selection and found that the PREVIOUS YEAR IS WORKING for the query, for which earlier it was not working. Now, my another issue is that previous year is not working for all other queries which we have used the 0P_FYEAR as variable.
Since I have tried this in QA, all the reports in QA are not working for previuos year. Please advise urgently to correct the same.
Thanks & Regards,Hi ,
Have you used Fiscal Yaer variant in your query?
When you use these variables you should restrict querieswith correct fiscal yaer Variant.
Jaya -
**dir sync major issues urgent please**
our dir sync is not working correctly the last sync was over 6 hours ago - all settings are fine i ran
the force utility Import-Module DirSync and Start-OnlineCoexistenceSync but no joy the azure directory C:\Program Files\Windows Azure Active Directory Sync only has one file in it which is coexistenceInstall.log i dont know where the sync
manager is or how to find it as it doesnt appear to be there, our portal azure setting show AD as syncing fine any ideas? this is a major issue as we have exchange online migrations to run and users to add etc we have tried everything our event viewer
also shows as sync failing any assistance?Hi,
this is the forum for Office client software.
Your question seems related to the online/hosted service aspects, and the better community for those topics is here:
http://community.office365.com/en-us/f/default.aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!) -
TableLayout issues ***Urgent, please help***
Gurus,
First off, singleDefaultColumn layout is not an option. I'm using tableLayout to format my UIX.
The problem lies with the fact that I'm using for cellformat to form a 1X4 grid. In order to align the messageTextInput properly, I'm having to supress it's prompt. The label for it is created as a messageStyledText in a different cell. Basically, the format of the page is as follows...
Pickup Contact: <pickup_contact> Delivery contact: <delivery_contact>
Pickup Address: <pickup_address> Delivery address: <delivery_address>
Pickup City: <pickup_city> Delivery City: <delivery_city>
Pickup State: <pickup_state> Delivery State: <delivery_state>
Pickup Zip: <pickup_zip> Delivery Zip: <delivery_zip>
Pickup Country: <pickup_country> Delivery Country: <delivery_country>
Here's the problem. When configuring messageTextInput as required, it misaligns the input boxes with the other inputs and doesn't provide a proper warning message (since there is no prompt). The UIonly option allows me to visually assign a required icon but provides no validation when assigning to messageStyledText since it's not related to the messageInput text.
So basically what I have is ... (and doesn't look very pretty) ... notice the (*) fields are not aligned with Contact and Country fields.
Pickup Contact: <pickup_contact> Delivery contact: <delivery_contact>
Pickup Address: *<pickup_address> Delivery address: *<delivery_address>
Pickup City: *<pickup_city> Delivery City: *<delivery_city>
Pickup State: *<pickup_state> Delivery State: *<delivery_state>
Pickup Zip: *<pickup_zip> Delivery Zip: *<delivery_zip>
Pickup Country: <pickup_country> Delivery Country: <delivery_country>
Any help would be greatly appreciated.
Thanks,
-ScottI was able to resolve this issue by creating a 1x2 table layout. Setting the display lengths of messageTextInput equally. Adjusting both cellFormats to "right align". In doing so, I achieve desired results along with displaying correct labels for NOT NULL validation.
-
Urgent Please - Receiving Transaction Processor Issue
Hi,
We are on 11.5.10. I am trying to create PO receipts using the interface program "Receiving Transaction Processor". I inserted data into the rcv_headers_interface and rcv_transactions_interface tables. As this dta is for contract labor, i am assuming that there is no need to insert data into shipment_related interface table. Following shows the insert statement I made sure that I am running the process from the correct org (the org that i used in the filed destination_oprganization field). But still the process completes normally but po_interface_errors has a record with error message as :
"RVTSH-189: Subroutine rvtshiline() returned error
Cause: Subroutine rvtshiline() returned an internal error.
Action: Note this error number and the actions you are trying to perform.
Contact your system administrator for"
The receipt gets created succesfully from the form. Anyone knows the issue? Please help me...thanks
Here are the insert statements...
--Insert data into Interface tables
INSERT INTO rcv_headers_interface
(header_interface_id,
GROUP_ID,
processing_status_code,
receipt_source_code,
transaction_type,
auto_transact_code,
last_update_date,
last_updated_by,
creation_date,
created_by,
expected_receipt_date,
comments,
validation_flag,
packing_slip,
vendor_id,
vendor_site_id,
ship_to_organization_id
VALUES (rcv_headers_interface_s.NEXTVAL,
rcv_interface_groups_s.NEXTVAL,
'PENDING',
'VENDOR',
'NEW',
'RECEIVE',
SYSDATE,
fnd_global.user_id,
SYSDATE,
fnd_global.user_id,
SYSDATE,
'test',
'Y',
'ABC',
po_headers.vendor_id,
po_headers.vendor_site_id
po_distributions.destination_organization_id
--Insert record in transactions_interface
INSERT INTO rcv_transactions_interface
(interface_transaction_id,
header_interface_id,
processing_status_code,
receipt_source_code,
transaction_date,
GROUP_ID,
last_update_date,
last_updated_by,
creation_date,
created_by,
transaction_type,
processing_mode_code,
transaction_status_code,
quantity,
unit_of_measure,
source_document_code,
po_header_id,
po_line_id,
po_line_location_id,
po_distribution_id,
to_organization_id,
comments,
interface_source_code,
employee_id,
auto_transact_code,
destination_type_code,
attribute_category,
category_id,
item_description
VALUES (rcv_transactions_interface_s.NEXTVAL,
rcv_headers_interface_s.CURRVAL,
'PENDING',
'VENDOR',
SYSDATE,
rcv_interface_groups_s.CURRVAL,
SYSDATE,
fnd_global.user_id,
SYSDATE,
fnd_global.user_id,
'RECEIVE', --'NEW',
'BATCH',
'PENDING',
2,
po_lines.unit_meas_lookup_code,
'PO',
po_headers..po_header_id,
po_lines.po_line_id,
po_line_locations.po_line_location_id,
po_distributions.po_distribution_id,
po_distributions.destination_organization_id,
'TEST',
'RCV',
1234, --employee_id
'RECEIVE',
'RECEIVING',
po_distributions.destination_organization_id,
45074,
'Standard'
);Pl see you duplicate post here - PO Receipts Interface Error!!
For urgent issues, pl open an SR with Support
Srini -
Set Page "HEIGHT" ---Very Urgent, Please Help me on this issue. Please.
Hi all ,
Very Urgent, Please Help me on this issue.
when_now_form trigger i set set maximize the window and MDI. And my window and canvas is same height (1500). The formsweb.cfg also changed to 1500. But still I can not view full page on web. Where to I change the properties. Please help.
SelvamIs your form running inside the browser window (with SeparateFrame=False)? If the browser is maximized, and your form is maximized, yet you cannot see the entire screen, you can run with SeparateFrame=True. You can do that on the browser line.
-
Urgent Please - Receiving Transaction Processor
Hi,
We are on 11.5.10. I am trying to create PO receipts using the interface program "Receiving Transaction Processor". I inserted data into the rcv_headers_interface and rcv_transactions_interface tables. As this dta is for contract labor, i am assuming that there is no need to insert data into shipment_related interface table. Following shows the insert statement I made sure that I am running the process from the correct org (the org that i used in the filed destination_oprganization field). But still the process completes normally but po_interface_errors has a record with error message as :
"RVTSH-189: Subroutine rvtshiline() returned error
Cause: Subroutine rvtshiline() returned an internal error.
Action: Note this error number and the actions you are trying to perform.
Contact your system administrator for"
The receipt gets created succesfully from the form. Anyone knows the issue? Please help me...thanks
Here are the insert statements...
--Insert data into Interface tables
INSERT INTO rcv_headers_interface
(header_interface_id,
GROUP_ID,
processing_status_code,
receipt_source_code,
transaction_type,
auto_transact_code,
last_update_date,
last_updated_by,
creation_date,
created_by,
expected_receipt_date,
comments,
validation_flag,
packing_slip,
vendor_id,
vendor_site_id,
ship_to_organization_id
VALUES (rcv_headers_interface_s.NEXTVAL,
rcv_interface_groups_s.NEXTVAL,
'PENDING',
'VENDOR',
'NEW',
'RECEIVE',
SYSDATE,
fnd_global.user_id,
SYSDATE,
fnd_global.user_id,
SYSDATE,
'test',
'Y',
'ABC',
po_headers.vendor_id,
po_headers.vendor_site_id
po_distributions.destination_organization_id
--Insert record in transactions_interface
INSERT INTO rcv_transactions_interface
(interface_transaction_id,
header_interface_id,
processing_status_code,
receipt_source_code,
transaction_date,
GROUP_ID,
last_update_date,
last_updated_by,
creation_date,
created_by,
transaction_type,
processing_mode_code,
transaction_status_code,
quantity,
unit_of_measure,
source_document_code,
po_header_id,
po_line_id,
po_line_location_id,
po_distribution_id,
to_organization_id,
comments,
interface_source_code,
employee_id,
auto_transact_code,
destination_type_code,
attribute_category,
category_id,
item_description
VALUES (rcv_transactions_interface_s.NEXTVAL,
rcv_headers_interface_s.CURRVAL,
'PENDING',
'VENDOR',
SYSDATE,
rcv_interface_groups_s.CURRVAL,
SYSDATE,
fnd_global.user_id,
SYSDATE,
fnd_global.user_id,
'RECEIVE', --'NEW',
'BATCH',
'PENDING',
2,
po_lines.unit_meas_lookup_code,
'PO',
po_headers..po_header_id,
po_lines.po_line_id,
po_line_locations.po_line_location_id,
po_distributions.po_distribution_id,
po_distributions.destination_organization_id,
'TEST',
'RCV',
1234, --employee_id
'RECEIVE',
'RECEIVING',
po_distributions.destination_organization_id,
45074,
'Standard'
);Pl see your triplicate post here - PO Receipts Interface Error!!
For urgent issues, pl open an SR with Support.
Srini -
Date format Problem in OAF R12 Urgent Please help!!!
We have acustom application in OAF which was developed in 11i. Now we migrated the same to R12.
In this there are two date fileds getting dispayed on the page and the query for the same is
SELECT TO_CHAR (SYSDATE, 'dd-mm-yyyy') AS CURRENT_DATE, UPPER (TO_CHAR (SYSDATE - 10, 'mon-yy')) AS g_period, UPPER (TO_CHAR (SYSDATE + 5, 'mon-yy')) AS gnext_period, TO_CHAR (sysdate,'dd-mon-yyyy') as today_date, TO_CHAR (sysdate - 1,'dd-mon-yyyy') as yesterday_date FROM DUAL
In 11i version the output is dispaying correctly but in R12 the current date is dispayed as
Start Date 04-Nov-5242
End Date 04-Nov-5241
As per logic it should be
Start Date 09-Feb-2012
End Date 10-Feb-2012
Please help..Urgent issue.Here are the answers to your problems :
1. Once u restart , the oracle services and the database is not mounting automatically.That is because, when you install the Oracle Oracle8i Standard Edition Release (8.1.7), the two key services namely
OracleOraHome81TNSListner and
OracleService<your SID name>
are configured as manual start ( check the NT --> start>setting>control panel>services. )
For the database to start automatically the next time you start your machine, these two services will have to be put into "Automatic Start" mode.
< for this double click on the respective service, select the "Automatic" radio button and click on ok>.
Now when you restart the machine, your database will be automatically mounted.
2. this as explained above is a corollory to the above problem. you can start or stop your database on NT using the "Services" window....
hope this helps.
bye.
Hi All,
I have installed Oracle Oracle8i Standard Edition Release (8.1.7) from technet site.
I have installed it on windows NT 4.0 .
Installation is fine.
I can access or get into SQL prompt .
I have created a database also.
1st problem
My problem is once I restart the Machine and try to access SQL plus .it gives me an error
ORA-01034: Oracle not available
ORA-27101: shared memory realm does not exist.
2nd problem
I dont know how to start and stop the database , as there is nothing to do that in the start menu of Oracle .
How do i do this .
This is very urgent please help.
regards,
Preeti -
Master with two details issue --- urgent
Hi,
This is an urgent issue. Please help solve this.
Page has one sub-tab layout region and beneath it advanced table - in advanced table region. The sub-tab region shows the master data(vo1) whereas the advanced table - in advanced table is used to display the details (vo2) and its details (vo3) data.
The relationship between 3 vos in AM is as follows:
vo1
|--------- conencted to vo2 via vl1
-----------------------------|-------------- connected to vo3 via vl2
How to set the CHILD_VIEW_ATTRIBUTE_NAME and VIEW_LINK_NAME on each of this region so that when vo1 is queried the data of vo2 and vo3 is fetched automatically and displayed?
Or is there any other way to make this haapen with the above mentioned region layout?
Appreciate your help. Thanks in advance.
Mitiksha
Edited by: Mitiksha on Sep 17, 2009 2:00 PMYou could use "New"/"BC" and create a ViewLink with the same name as the FK Assoc. If you edit the PackageModule, you should be able to see your FK link in there.
-
Hai frnds
I have got a new dell studio 15 laptop.iam much interested in oracle applications and for the purpose of learning oracle applications i got it.when i tried to install redhat enterprise linux 4 replacing windows xp on my machine it throws the error message as driver not found and the installation does not proceed.when i asked the computer dealers they said that i have to go for some newer rhel version for installing linux in my laptop since its a new brand.
before few days i tried to install oracle applications 11.5.10.2 on rhel 5 but i got a lot of errors and the oracle forums advised me to go for rhel 4 for installing oracle applications 11.5.10.2.now iam confused and dont know wat to do .
my aim is install oracle applications 11.5.10.2 on some newer version other than rhel 4 which supports my dell laptop
i want to know whether installation of oracle applications 11.5.10.2 is possible on rhel 8 or rhel 9.will the installation goes properly.
Thanks and Regards
Parithi.A.Hi,
Please see your other thread.
install issue -urgent
install issue -urgent
Regards,
Hussein -
BEx Report Display - Transformation Rule Issue - Urgent
I have 2 fields one Key Figure : "Amount (Datatype-CURR / length-13)" and one Characteristics : "Indicator (Datatype-CHAR / length-1)" in the source system.
I need to display the Amount field with +/- depending on the Indicator field which has only 2 values S(Credit) and H(Debit) in the BEx Report.
How can I handle this issue. Please provide your suggestions.
Thanks,
ShekarCreate 2 Key Figures.
One restricted with S(Credit) and another restricted with H(Debit).
Create another canculated Key Figure and multiply with -1 for the u want to do.
Then add the 2 filed if you want to and display and keep the others in No Display.
Regards, Siva -
Hello Guys,
I am creating resultsource from central admin. If I create it from central admin it works fine. But if I am creating result source from power shell scripts it shows me following error message.
An exception of type 'Microsoft.Office.Server.Search.Query.InternalQueryErrorException' occurred in Microsoft.Office.Server.Search.dll but was not handled in user code
Additional information: Search has encountered a problem that prevents results from being returned. If the issue persists, please contact your administrator.
Any suggestion ?
Thanks in Advance.Hi,
Please provide more specific information about the issue. What type of content source you tried creating via powershell?
Make sure you are using the approproate permission and search service application.
Here is the reference for creating content resource via script:
http://technet.microsoft.com/en-us/library/ff607867(v=office.15).aspx
Regards,
Rebecca Tu
TechNet Community Support -
urgent please: I have a new iphone 4S and while sync with itunes, it was not done using the data of my old iphone but with a new virgin iphone. how can I retrieve and sync with my old datas? through icloud? or have I lost everything? please help
to be more precise
I have saved all my datas of my old iphone on itunes and icloud. I got a new phone 4s that I connected to itunes in order to load it and sync with my old datas. but I don't konw how but when itunes sync my new iphone i did not take my old datas. at the end of the sync process, I got an iphone totally virgin, but none of my previous apps, neither contact neither calendar neither anything. what happened? did itunes erased all my previous datas?? i hope not but if it's the case, can I recuperate my old datas through icloud? please help because as a lot of us, all my life is in this iphone.. (contacts, photos of my 18months girl, etc etc)
thank you very much -
How to fix this error "this iPad is not able to complete the activation process. Please press Home and start over. If the issue persists, please visit your nearest Apple Store or Authorized service provider for more information or replacement"? When I plugged in my iPad this popped up!
Hi csreddy,
If you are receiving a message to contact an Apple Retail Store or Authorized Service Provider for help updating from iOS 3, click on the link below to initiate that support:
Update the iOS software on your iPhone, iPad, and iPod touch - Apple Support
http://support.apple.com/en-us/HT204204
Update your device using iTunes
If you can’t update wirelessly, or if you want to update with iTunes, follow these steps:
Install the latest version of iTunes on your computer.
Plug in your device to your computer.
In iTunes, select your device.
In the Summary pane, click Check for Update.
Click Download and Update.
If you don't have enough free space to update using iTunes, you'll need to delete content manually from your device.
Find out what to do if you get other error messages while updating your device.
Last Modified: Jan 12, 2015
Apple - Find Locations
https://locate.apple.com
Contact Apple for support and service - Apple Support
http://support.apple.com/en-us/HT201232
Regards,
- Judy -
I have a Macbook Pro purchased brand new. I take high quality pictures for customers, these display perfect on my laptop but appear CORRUPT on a USB stick. What is causing this? I can't seem to fix this issue. PLEASE HELP!!
I really need this issue resolved it is driving me insane!!! How can the images appear perfectly fine on my laptop then when transferring over to a USB stick they just corrupt!?Check out this site:
http://osxdaily.com/2012/04/22/format-drive-mac-pc-compatible/
That will show you how to format a USB stick for use on both PC and Mac.
If the problem continues take it to an Apple store and have them check it out.
>Also what s exFAT?<
From:
http://en.wikipedia.org/wiki/ExFAT
"exFAT (Extended File Allocation Table) is a Microsoft file system optimized for flash drives.[3] It is proprietary and patented."
That first site explains it at length.
Maybe you are looking for
-
Do I really need to buy an external drive to burn DVDs on my eMac (10.4)?
I have been trying to burn DVDs (using DVD-Rs, not DVD+Rs) on my eMac (OS 10.4) without success. The machine just acts as if nothing has been put in the drive; it whirrs and whirrs, no icon appears, no error message, nothing, until after half an hour
-
Hi folks! I've got the most frustrating issue I've ever experienced. Single Sign on for my wireless clients (laptops/tablets). It's literally hit or miss whether it happens or not. The most recent one is a rebuild of an ASUS T100TA. I installed 8.1 P
-
Checking a value against a BC set
I have a BC set with different ranges of values, and I need to check if one particular value is included on the set. Are there any function to check that? I was searching on forum posts and I've found some answers referring to some functions, but I
-
I upgraded my video card not too long ago to the 7800GT. Works like a charm. All in all I love the card. Although, the fan is real noisy. There was a period of time when I booted the computer that the fan wouldn't be overly loud. It was only on a fre
-
Student discount on Logic Pro X?
Is there any way of getting student/education price discounts on Logic Pro X