FIM Synchronization Service doesn't start

Hi,
Recently we have migreated FIM database from the local SQL server to an SQL 2012 Cluster. I used the following guide to configure DB related settings. Things worked fine.
http://social.technet.microsoft.com/wiki/contents/articles/5465.fimilm-how-to-move-the-backend-sql-server-synchronization-service-database.aspx
However after I uninstalled local SQL and rebooted the server FIM service doesn't start. The error message is:
The Forefront Identity Manager Sychronization Service depends the following service: MSSQLSERVER. This service might not be installed. (Event ID 7003).
How to fix this problem?
Thank you for your help.

I assume that you have uninstalled MS SQL Server, right? If so, please try the following:
Remove MSSQLServer from the DependOnService Value Name, a REG_MULTI_SZ data type
at HKLM\System\CurrentControlSet\Services\<ServiceKey>
Run as admin - it would remove dependency from FIMSynchronizationService.
Keep trying If you found my post helpful, please give it a Helpful vote. If it answered your question, remember to mark it as an Answer.

Similar Messages

DBConsole Service doesn't start after Install OAS F&R-Services Win 10g

Windows DBConsole Service doesn't start after Install OAS F&R-Services
Hello,
we have installed:
WINDOWS Server 2003 with SP 2
Oracle 10.2.0.1
OAS F&R Services 10.1.2.0.2
after Install DBR2 EM / DBConsole did work
after Install OAS F&R-Service
the windows-service for DBConsole
doesn't start, return with an Error Code 2
see below
the file named emdbconsole.nohup from output log
is not to find
the ias_console does work fine
OAS F_R-Services do work too
whats may be wrong ?
regards
Norbert
OracleDBConsoleorclsrvc.log :
EMDROOT=D:\oracle\product\10.2.0\db_1
ORACLE_HOME=D:\oracle\product\10.2.0\db_1
EMDSTATE=D:\oracle\product\10.2.0\db_1\kfin_orcl
CONSOLE_CFG=dbconsole
TRACE_LEVEL=16
TIMEOUT=15
12/14/09 13:13:08 Start pending...
12/14/09 13:13:08 Verifying dbconsole is not started already. Command line "D:\oracle\product\10.2.0\db_1\bin\emctl.bat" istatus dbconsole
12/14/09 13:13:09 dbconsole launch commandline is "D:\oracle\product\10.2.0\db_1\bin\emctl.bat" istart dbconsole
12/14/09 13:13:09 Tracking process launch...
12/14/09 13:13:39 dbconsole exited with retCode 2.
12/14/09 13:13:39 Check D:\oracle\product\10.2.0\db_1\kfin_orcl\sysman\log\emdbconsole.nohup for details
Edited by: astramare on Dec 15, 2009 8:43 AM

Hi,
1. Stop the DBConsole. (set ORACLE_SID first & ORACLE_HOME)
cd %ORACLE_HOME%\bin
emctl stop dbconsole
2. Update the <ORACLE_HOME>/<hostname_sid>/sysman/config/emd.properties file.
Change line from:
tracelevel.main=WARN
To
tracelevel.main=DEBUG
Decomment this line, so that the line becomes :
EMAGENT_PERL_TRACE_LEVEL=DEBUG
3. Update the <ORACLE__HOME>/<hostname_sid>/sysman/config/emomslogging.properties
Change line from:
log4j.rootCategory=WARN, emlogAppender, emtrcAppender
To
log4j.rootCategory=DEBUG, emlogAppender, emtrcAppender
4. Remove/backup all log files from ORACLE_HOME/<hostname_sid>/sysman/log
5. Start the dbconsole and upload the output of each command
- start the dbconsole: "emctl start dbconsole"
- issue "emctl clearstate"
- status the dbconsole: "emctl status dbconsole"
- check the status of the agent until it comes up: "emctl status agent"
- force an upload: emctl upload
6. Check If you are able to view the dbconsole Page & login
check below logs may be you can see the close error messages to solve the issue.
<ORACLE_HOME>/<hostname_sid>/sysman/log directory
<ORACLE_HOME>/<hostname_sid>/sysman/config/emoms.properties
Otherwise re-create the DBconsole using the metalink doc 278100.1 : How To Drop, Create And Recreate DB Control In A 10g Database. (Please check the steps from Recreate/ReConfig DB Control, if you want to re-create)
Thanks.

SUP 2.0 Why the sybase Messageing Service doesn't start?

Hellow experts,
SUP 2.0 Why the sybase Messageing Service doesn't start?
When I start the service, it starts and ends indicating "if they are not in use by other services or programs; it will end automatically"
What should I do for this?
Thanks
Prabakar

sometimes you only have to restart your pc. STOP SUP SERVICE ( AS ADMINISTRATOR ) and START SERVICE ( AS ADMINISTRATOR AGAIN ) ...
That happens to me very often!

FIM Synchronization Service Event ID 6050 , 6126

FIM Synchronization Service
Event ID 6050 , 6126
Version : SharePoint 2010 Sp1+ CU12 14.0.6129.5000
i have saw daily in my logs regarding User profile Service and FIM Errror . Daily 1 AM scheduled time for User Profile Incremental Running.
And also.
MsiInstaller Error 1015, 1001,1004,1015,1001,
The management agent "MOSSAD-Sync" failed on run profile "DS_FULLIMPORT" because of connectivity issues.
Additional Information
Discovery Errors       : "0"
Synchronization Errors : "0"
Metaverse Retry Errors : "0"
Export Errors          : "0"
Warnings               : "0"
User Action
View the management agent run history for details.
The management agent "MOSSAD- Sync" failed on run profile "DS_FULLIMPORT" because of connectivity issues.
Additional Information
Discovery Errors       : "0"
Synchronization Errors : "0"
Metaverse Retry Errors : "0"
Export Errors          : "0"
Warnings               : "0"
User Action
View the management agent run history for details.
The management agent "MOSSAD- Sync" failed on run profile "DS_FULLIMPORT" because of connectivity issues.
Additional Information
Discovery Errors       : "0"
Synchronization Errors : "0"
Metaverse Retry Errors : "0"
Export Errors          : "0"
Warnings               : "0"
User Action
View the management agent run history for details.
The management agent "MOSS-7ffc718e-5920-45ab-9cae-5c435e3769c0" completed run profile "MOSS_DELTAIMPORT_b23eb677-e1bd-4079-9feb-b769fd6ff90a" with a delta import or delta synchronization step type. The rules configuration has changed
since the last full import or full synchronization.
User Action
To ensure the updated rules are applied to all objects, a run with step type of full import and full synchronization should be completed.
Please suggest .
Deepesh Yevle - MCTS MCITP

Hi
Deepesh,
Please confirm that the Service Account you used to run the Forefront Identity Manager Synchronization Service(FIM Synchronization
Service) has the Active Directory Security Rights for “ Replicating Directory Changes”.
For more detailed information, see
http://themossblog.com/sharepoint-2010/sharepoint-2010-user-profile-synchronization-failing-event-id-6050
Best Regards.
Kelly Chen
TechNet Community Support

Fim Synchronization service 2010 r2

hello,
I am running FIM Synchronization service with different management agents. sometimes thing goes wrong. how can i monitor those tasks? I want to use powershell for than because i have a lot of other hings that i monitor that way.
is it possible to "GET" the status and dates with some kind of FIM cmdlets? or maybe via event log?
third-party modules is no option.
I hope one of u guys can point me in the right direction.
Kind regards
Harm Schutte

Hi Harm,
In addition to the FIM Cmdlets the FIM Synchronization Service event log also contains log entries when the Management Agent runs have warnings/errors. You would though need to filter down to the find the specific entries that you are after.
If third party products/modules aren't an option you could also look at using a scheduled task that gets triggered based on particular events happening in the Sync Service log - I probably wouldn't recommend it though.
Andrew.

FIM Synchronization Service Manager Service Stopped infrequently

Hi All,
FIM Synchronization Service Manager Service Stopped infrequently, When run the Full Sync of the SQL Management Agent, the service stopped automatically.The issue occur randomly, there are instance when the Full Sync run successfully. Kindly advice
Thanks and Regards,
RajaVillage Sync

Please look in the Application Event log for more data. Post what you find here and the community will help out. Also tell us what version of FIM, what version of SQL is hosting FIM and what version of SQL your MA is talking to.
David Lundell, Get your copy of FIM Best Practices Volume 1 http://blog.ilmbestpractices.com/2010/08/book-is-here-fim-best-practices-volume.html

Report service doesn't start after installing 9iAS

Forms are fine after installing 9iAS, but report server doesn't
start, and is not listed in Control Panel, Services.
If I try start it as RWMTS60.exe -install oracledev2 tcpip I got
the error "Please consult the installation guides for how to set
up and run this program", if I start it as RWMTS60.exe -listen
oracledev2 I got the error "Rep 0001:Unable to find the report
builder message file. Please verify your installation". Attempt
to run any Reports product (Runtime, for instance) causes
Dr.Watson on RWRUN60.exe. The registry parameter RW60 points to
the ORACLE_HOME/report60 for the Reports Server that is failing.
What do I do to start Reports ?
Thank you,
Kate

Hi,
1. Stop the DBConsole. (set ORACLE_SID first & ORACLE_HOME)
cd %ORACLE_HOME%\bin
emctl stop dbconsole
2. Update the <ORACLE_HOME>/<hostname_sid>/sysman/config/emd.properties file.
Change line from:
tracelevel.main=WARN
To
tracelevel.main=DEBUG
Decomment this line, so that the line becomes :
EMAGENT_PERL_TRACE_LEVEL=DEBUG
3. Update the <ORACLE__HOME>/<hostname_sid>/sysman/config/emomslogging.properties
Change line from:
log4j.rootCategory=WARN, emlogAppender, emtrcAppender
To
log4j.rootCategory=DEBUG, emlogAppender, emtrcAppender
4. Remove/backup all log files from ORACLE_HOME/<hostname_sid>/sysman/log
5. Start the dbconsole and upload the output of each command
- start the dbconsole: "emctl start dbconsole"
- issue "emctl clearstate"
- status the dbconsole: "emctl status dbconsole"
- check the status of the agent until it comes up: "emctl status agent"
- force an upload: emctl upload
6. Check If you are able to view the dbconsole Page & login
check below logs may be you can see the close error messages to solve the issue.
<ORACLE_HOME>/<hostname_sid>/sysman/log directory
<ORACLE_HOME>/<hostname_sid>/sysman/config/emoms.properties
Otherwise re-create the DBconsole using the metalink doc 278100.1 : How To Drop, Create And Recreate DB Control In A 10g Database. (Please check the steps from Recreate/ReConfig DB Control, if you want to re-create)
Thanks.

Opmn services doesn't start on Apps tier

Hi All,
We have issue in starting apps tier services via adstrtal.sh. It doesn't start anything other than listener and rest all opmn process timed out.
In the server I can see only
"opmn -a -q ping"
and
sh <path>/opmnct
sh <path>/adapcctl.sh
etc, but it doesn't start anything and even doesn't reach the stage where it writes in log file. No actually no log present. Its a new server and clone went well, no issues faced. But not sure what is the issue here and why it is not starting anything. I increased the time out value from 600 to 1800 in opmn.xml file for all components but no help. It keep on waiting and time out.
Server side I did check ping localhost DNS entries in /etc/resolv.conf. But everything works well.
Any clue ?

Sundeep,
Please mention your application release along with the database version and OS.
Was this working before? If yes, any changes have been done recently?
Can you find any details about the error in the opmnctl.sh script log file?
Please run AutoConfig and make sure it completes successfully.
Thanks,
Hussein

Why RAC services doesn't start automatically?

Hi All,
I have 2-node 10gR2 RAC installed on RHEL4. Whenever i restart the server, the services related to RAC are not starting automatically except VIP related services. Manually i have to start the services using crs_stop and crs_start commands. then, everything will be fine and working. There was no problems or error occurred while installation.
Whenever i restart my node VIP addresses which are in DNS takes about 10-15 mins to resolve, means to show up in ifconfig -a output. Is this related to service not starting automatically?
Can anybody tell me what might be the problem?
Thanks,
Praveen.

when a failure occurs, the cluster will put things back to the state they were in at the time of failure. So if your database is running and the node crashes or is rebooted, then the services should start because the target state is ONLINE. If you do a srvctl stop database, then this is a assumed a planned shutdown so we stop the database and the services (dependent resource as Erik says). If after you have successfully stopped the database, the target state of the service is OFFLINE. If you reboot at this point, then the database and service should not start.
All databases should work the same if they were created the same. There is not enough information in your post to know why they did not start. If it continues to be a problem, contact Oracle Support and they can help figure out the differences.

Windows service doesn't start at boot

When our Xserve starts up, the Windows service does not start.
I've got SMBSERVER=-YES- in /etc/hostconfig.
Once the xserve is running, clicking on the Start Service button for Windows in Server Admin starts the service with no problems. Once it's running, it's fine. The server has no other problems that I'm aware of.
Any suggestions would be greatly appreciated.
Xserve Mac OS X (10.4.6)

I have exactly the same problem. Did you ever find a solution?

[SOLVED] Opendias service doesn't start

Hello,
I've just installed the package opendias built from the AUR. But I'm facing 2 problems:
1) I cannot start the service using systemctl. The binary starts fine by running it directly.
2) I also have issues finding the scanner that works properly using SANE.
My user was added to the opendias group. Any idea on how to solve this? Thank you in advance.
[paulo@SonyVaio ~]$ systemctl status opendias.service -l
● opendias.service - OpenDIAS (Document Imaging Archive System)
Loaded: loaded (/usr/lib/systemd/system/opendias.service; enabled)
Active: failed (Result: start-limit) since Sáb 2014-05-10 23:24:05 WEST; 1min 32s ago
Process: 3005 ExecStart=/usr/bin/opendias (code=exited, status=1/FAILURE)
Mai 10 23:24:05 SonyVaio systemd[1]: Failed to start OpenDIAS (Document Imaging Archive System).
Mai 10 23:24:05 SonyVaio systemd[1]: Unit opendias.service entered failed state.
Mai 10 23:24:05 SonyVaio systemd[1]: opendias.service holdoff time over, scheduling restart.
Mai 10 23:24:05 SonyVaio systemd[1]: Stopping OpenDIAS (Document Imaging Archive System)...
Mai 10 23:24:05 SonyVaio systemd[1]: Starting OpenDIAS (Document Imaging Archive System)...
Mai 10 23:24:05 SonyVaio systemd[1]: opendias.service start request repeated too quickly, refusing to start.
Mai 10 23:24:05 SonyVaio systemd[1]: Failed to start OpenDIAS (Document Imaging Archive System).
Mai 10 23:24:05 SonyVaio systemd[1]: Unit opendias.service entered failed state.
[paulo@SonyVaio ~]$ whereis opendias
opendias: /usr/bin/opendias /usr/lib/opendias /etc/opendias /usr/etc/opendias /usr/share/opendias
Last edited by BullGates (2014-05-11 00:11:19)

Update: service start solved. the database and the log files were set as root, after fixing it to the user opendias it works fine.
Regarding 2) when I use scanimage -L, the output is:
[paulo@SonyVaio ~]$ scanimage -L
device `epkowa:net:192.168.1.67:1865' is a Epson Stylus NX330/SX430W/TX430W/ME OFFICE 570W Series flatbed scanner
but if I issue a command sane-find-scanner it doesn't seem to find the scanner. Seems like a problem from opendias

Communication services doesn't starts

Hi to all,
I've got a MacBook and I have just upgraded it from Snow Leopard to Lion.
Now, often, it's impossible to access to network services (Wi-Fi, TCP/IP), bluetooth,...
In the bar at the top of the screen, after login, doesn't apper any icon relevant to bluetooth, netwotk (wi-fi and wired), battery status, time and so on. Onòly the Finder menu appears.
But one time every a dozen of restarts all it's ok. But if I shutdown the system I don't know if the next time it starts normally.
Why this? What can i do?
I urgent for communications with internet. Now I'm using another computer.
Help me, please

In the new account it did work. I did a new restart and now it worked in the old account too. For some reason I had to do several restart. Anyway it behaves as it should now,
Many thanks, baltwo!

Contacts and Calendar Services doesn't start

After upgrading from Lion Server to Mavericks all seem to works except Contacts and Calendar. I can not start both services from the Server.app and neither from the Terminal.
servidor:~ admin$ sudo serveradmin start calendar
calendar:readWriteSettingsVersion = 1
calendar:setStateVersion = 1
calendar:state = "STOPPED"
calendar:contactsState = "STOPPED"
calendar:calendarState = "STOPPED"
servidor:~ admin$ sudo serveradmin start contacts
contacts:error = "CANNOT_LOAD_BUNDLE_ERR"
servidor:~ admin$
This are the logs
19/07/14 07:09:37,134 com.apple.launchd[1]: (org.calendarserver.calendarserver[34005]) Exited with code: 1
error.log:
Reading configuration from file: /Applications/Server.app/Contents/ServerRoot/private/etc/caldavd/caldavd-apple. plist
Neither EnableCalDAV nor EnableCardDAV are set to True.
migration.log
2014-07-18 23:20:14+0100 received postgres stdout '2014-07-18 23:20:14 XPG.8756: Executing pg_ctl [\'/Applications/Server.app/Contents/ServerRoot/usr/bin/pg_ctl\', \'-p\', \'/Applications/Server.app/Contents/ServerRoot/usr/bin/xpostgres\', \'start\', \'-l\', \'/var/log/caldavd/xpg_ctl.log\', \'-w\', \'-o\', "-c listen_addresses=\'\' -k \'/var/run/caldavd/PostgresSocket\' -c shared_buffers=75 -c max_connections=50 -c standard_conforming_strings=on -c unix_socket_permissions=0770 -c log_lock_waits=TRUE -c deadlock_timeout=10 -c log_line_prefix=\'%m [%p] \' -c logging_collector=on -c log_truncate_on_rotation=on -c log_directory=/var/log/caldavd/postgresql -c log_filename=postgresql_%w.log -c log_rotation_age=1440"]\n2014-07-18 23:20:14 XPG.8756: Spawning... [\'/Applications/Server.app/Contents/ServerRoot/usr/bin/pg_ctl\', \'-p\', \'/Applications/Server.app/Contents/ServerRoot/usr/bin/xpostgres\', \'start\', \'-l\', \'/var/log/caldavd/xpg_ctl.log\', \'-w\', \'-o\', "-c listen_addresses=\'\' -k \'/var/run/caldavd/PostgresSocket\' -c shared_buffers=75 -c max_connections=50 -c standard_conforming_strings=on -c unix_socket_permissions=0770 -c log_lock_waits=TRUE -c deadlock_timeout=10 -c log_line_prefix=\'%m [%p] \' -c logging_collector=on -c log_truncate_on_rotation=on -c log_directory=/var/log/caldavd/postgresql -c log_filename=postgresql_%w.log -c log_rotation_age=1440"]\n'
servermgr_calendar.log
[cal] 19/07/14 07:40:21 GMT+2 : EnableCalDAV = 0
[cal] 19/07/14 07:40:21 GMT+2 : CalDAV = {
Someone may help me?. Do you need more logs?

Back up all files.
Quit the Server application and drag it to the Trash, but don't empty. You'll be prompted to confirm that you want to stop all services. You won't lose any server data.
Put the app back where it was and launch it. Test.

FIM Synchronization Service - How to provsion a group to another object type

Hi,
i'm new to fim and use just the fim2010 synchronization engine with some rules extensions.
I have 2 ActiveDirectories and want to Provision a Group(used as Distribution list) from ActiveDirectory A as a contact object in ActiveDirectory B with the SMTP address of the Group as the targetaddress of the contact.
Can you give me a hint how to accomplish that?
Should i use the ShouldProjectToMV() Method in the rulesextension from the AD Connector of Domain A and out the Group as a Special mvtype? How do i join (what anchor to use) the Group to Domain B if i also sync normal contact objects as well?
Thanks you for your help!

If you want to decide that object is deleted you need to implement your de-provisioning logic.
De-provisioning logic should be implemented in Provision method as well. You need there something like:
if(I_dont_have_contact_for_group)
Provison_new_one
} else
if(do_I_Have_email_on_my_group_in_mv)
No -> delete_contact_in_other_forest
Depends on the target agent scope, if you have there other object types than contacts, you may want to implement Deprovision() method in agent extension to decide that contact should be deleted but other type of objects not.
Tomek Onyszko, memberOf Predica FIM Team (http://www.predica.pl), IdAM knowledge provider @ http://blog.predica.pl

[ Solved (?) ] CUPS error - service doesn't start

I've posted this here, because it is a print server problem.
I've installed cups as usual on a machine (Yes, as in the wiki).
The packages installed were: cups gsfonts ghostscript and hplip (for a HP printer ).
If I do /etc/rc.d/cupsd start ( or anything else ) to launch the cupsd service,
it tells me that cupsd has failed to start ( child exited with status 4 ).
Nothing in the logs.
Somebody has an idea, what could this mean?
Last edited by scar (2012-03-23 08:08:50)

Well, I've checked a working cups install, and when I set LogLevel in cupsd.conf to debug, I get this ( normal ) messages:
I [09/Mar/2012:22:18:04 +0100] Full reload complete.
D [09/Mar/2012:22:18:04 +0100] cupsdCleanFiles(path="/var/spool/cups/tmp", pattern="(null)")
I [09/Mar/2012:22:18:04 +0100] Cleaning out old files in "/var/spool/cups/tmp"...
D [09/Mar/2012:22:18:04 +0100] cupsdCleanFiles(path="/var/cache/cups", pattern="*.ipp")
I [09/Mar/2012:22:18:04 +0100] Cleaning out old files in "/var/cache/cups"...
( this far I get them on the "failing" machine too)
but the below lines appear only on a working install, not on the machine that fails to start:
I [09/Mar/2012:22:18:04 +0100] Listening to 0.0.0.0:631 on fd 8...
I [09/Mar/2012:22:18:04 +0100] Listening to [v1.::]:631 on fd 9...
I [09/Mar/2012:22:18:04 +0100] Listening to /var/run/cups/cups.sock:631 on fd 10...

FIM Synchronization Service doesn't start

Similar Messages

Maybe you are looking for