FIM Synchronization Service Manager Service Stopped infrequently

Hi All,
FIM Synchronization Service Manager Service Stopped infrequently, When run the Full Sync of the SQL Management Agent, the service stopped automatically.The issue occur randomly, there are instance when the Full Sync run successfully. Kindly advice
Thanks and Regards,
RajaVillage Sync

Please look in the Application Event log for more data. Post what you find here and the community will help out. Also tell us what version of FIM, what version of SQL is hosting FIM and what version of SQL your MA is talking to.
David Lundell, Get your copy of FIM Best Practices Volume 1 http://blog.ilmbestpractices.com/2010/08/book-is-here-fim-best-practices-volume.html

Similar Messages

Adobe CEP Service Manager has stopped working

I had repeated problems installing Creative Cloud for the desktop, after it asked me to upgrade.
After renaming OOBE and using the cleaning tool several times, i got Creative Cloud to finally install.
But when I tried to run it, I get "Adobe CEP Service Manager has stopped working".
So I'm still dead in the water. This is just the latest of a string of problems I've had in installing
Creative Cloud for the desktop on my several PCs.
Any suggestions?

Hi Ken,
Does right click run and Administrator when launching the Creative Cloud for desktop make any difference?
-Dave

CS6 Service Manager has stopped working?

Installed trial version and it seems to download but then when I try to use the program a pop up box that says Adobe CS6 Service Manager has stopped working keeps popping up. How to fix?

Which Adobe software in specific is giving you this error message? Which operating system are you using? Did you receive any error messages during the installation process?

CS5 Service Manager crash

My system: Windows 7 Ultimate 64-bit; Dual 3.2GHz XEON CPUs; 16GB RAM; 500GB HD; Radeon X1700 (Dual monitors); fully updated and in good health.
I installed CS5 Master Suite fresh (not an upgrade) from the Student/Teacher distribution DVDs, and immediately following this I allowed it to download and install all updates.
However, as soon as I start any application in the suite (except Acrobat), I get a message saying that "Adobe CS5 Service Manager has stopped working". The details are as follows:
Problem signature:
Problem Event Name:    APPCRASH
Application Name:    CS5ServiceManager.exe
Application Version:    5.0.1.134
Application Timestamp:    4c48a5c7
Fault Module Name:    CS5ServiceManager.exe
Fault Module Version:    5.0.1.134
Fault Module Timestamp:    4c48a5c7
Exception Code:    c0000005
Exception Offset:    0000fee2
OS Version:    6.1.7600.2.0.0.256.1
Locale ID:    6153
Additional Information 1:    0a9e
Additional Information 2:    0a9e372d3b4ad19135b953a78882e789
Additional Information 3:    0a9e
Additional Information 4:    0a9e372d3b4ad19135b953a78882e789
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
I have trawled the forums and FAQs but have not found any idea what might cause this. Has anybody come across this problem before and have any suggestions about how to fix it?
Thanks

Thanks for the input.
My issue isn’t so much with CC (it’s working fine), but when I open indesignCC I got the message that CS5 Service manager needed a legacy version of java to run.
This issue seems to be a legacy issue going back from CS5. When you click on more info, it just takes you to a blank HTML page.
I went through the Hardrive/Library/ApplicationSupport/Adobe/CS5ServiceManager Folder... and simply deleted it.
Theres lots more out-dated junk in there. Uninstall doesn't get everything I guess.
Thanks,

CS6 Service Manager?

I recently downloaded CS6 Photoshop, successfully, supposedly. When I try to load the program I get 32 instances of "dynamic link manager has stopped working". The program loads and appears to work (it loads files) but I haven't done anything with it because I am constantly interupted with a CS6 Service Manager. exe msg; "Application has failed to start because MSVPC100.Dll was not found. Re installing the application may fix the problem." I am not sure which program this is refering to. I went to the control panel but found no program resembling CS6 Service Manager to unisntall. Should I unistall photoshop and reinstall it
? I also can't find much about what MSVPC100.Dll does. Is this some sort of cloud related thing that the Service Manager is constantly monitoring the program? My old CS4 still works fine. Installed Premier Pro on my computer and got the same problem Any suggestions on how I can make CS6 useable? Thanx

I reinstalled photoshop and still have the same problem though Photoshop will now load with out the 32 dynamic link manager has stopped working msgs, when I try to use the program I am interrupted every 15 seconds with a msg that CS6 service manager has stopped working - unable to locate component MSVPC100.Dll.
I did do a quick search of my computer and it did not find MSVPC100.Dll either. Is there away to get it onto my computer so that the service manager can find it.? (I assume there is no way to get the service manager to stop looking for it)
All suggestions welcome.
Thanks in advance.

I can't see the Reporting Workspace in Service Manager Console PLEASE HELP

I can't see the Reporting Workspace in Service Manager Console PLEASE HELP

Hello,
If you don't have an entry like "SQL Server Reporting Services (InstanceName)" in Windows Service Manager (Services.msc) then because SSRS service not installed on that machine. Install it, then you will see such an entry.
Olaf Helper
This is not an SQL issue it's a SC Service Manager issue. Reporting Services is installed and running on the SQL side. The problem is that as I am now aware I cannot get the Data Warehouse Server to register in the Service Manager consoles to connect that
with the canned reports and turn on Reporting Workspace. Any thoughts?
[ Blog] [ Xing] [ MVP]

HP Service Manager vs HP Service Anywhere.

Hello ,
Does HP Service Anywhere has any module level differences from HP Service Manager.
Regards,
Somya

Somya_Tyagi, welcome to the forum.
Here are links to each of the services:
http://www8.hp.com/us/en/software-solutions/service-anywhere-itsm-itil-service-desk/
http://www8.hp.com/us/en/software-solutions/service-manager-service-desk/
This is a peer to peer help forum. The only presence that HP has on it are the Admins and the Mods. Otherwise, none of us works for HP. Therefore, I suggest contacting the Sales rep for each of the products. There is a phone number in the "Contact Us" section of each link.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Which sharepoint service applications & services are required for Project server 2013 to work fine.

HI,
Can any one help me,
I am planning to install project server 2013, what are the service applications and Services ( Manage services on server in central admin ) in sharepoint are required for project server 2013 to work fine, so that i will run only service
application and services to increase server performance..i don't want to configure all service applications when i am configuring.
Thanks in Advance..
vijay kommireddi

Hi Vijay,
If you are installing Project Server on SharePoint farm, You need to start the service Project Application Service which would be available after you install project Server 2013.
For Project Server Reporting you need to start Excel service and Secure Store service.
http://technet.microsoft.com/en-us/library/ee662106(v=office.15).aspx
Thanks,
Phani

FIM Synchronization Service Event ID 6050 , 6126

FIM Synchronization Service
Event ID 6050 , 6126
Version : SharePoint 2010 Sp1+ CU12 14.0.6129.5000
i have saw daily in my logs regarding User profile Service and FIM Errror . Daily 1 AM scheduled time for User Profile Incremental Running.
And also.
MsiInstaller Error 1015, 1001,1004,1015,1001,
The management agent "MOSSAD-Sync" failed on run profile "DS_FULLIMPORT" because of connectivity issues.
Additional Information
Discovery Errors       : "0"
Synchronization Errors : "0"
Metaverse Retry Errors : "0"
Export Errors          : "0"
Warnings               : "0"
User Action
View the management agent run history for details.
The management agent "MOSSAD- Sync" failed on run profile "DS_FULLIMPORT" because of connectivity issues.
Additional Information
Discovery Errors       : "0"
Synchronization Errors : "0"
Metaverse Retry Errors : "0"
Export Errors          : "0"
Warnings               : "0"
User Action
View the management agent run history for details.
The management agent "MOSSAD- Sync" failed on run profile "DS_FULLIMPORT" because of connectivity issues.
Additional Information
Discovery Errors       : "0"
Synchronization Errors : "0"
Metaverse Retry Errors : "0"
Export Errors          : "0"
Warnings               : "0"
User Action
View the management agent run history for details.
The management agent "MOSS-7ffc718e-5920-45ab-9cae-5c435e3769c0" completed run profile "MOSS_DELTAIMPORT_b23eb677-e1bd-4079-9feb-b769fd6ff90a" with a delta import or delta synchronization step type. The rules configuration has changed
since the last full import or full synchronization.
User Action
To ensure the updated rules are applied to all objects, a run with step type of full import and full synchronization should be completed.
Please suggest .
Deepesh Yevle - MCTS MCITP

Hi
Deepesh,
Please confirm that the Service Account you used to run the Forefront Identity Manager Synchronization Service(FIM Synchronization
Service) has the Active Directory Security Rights for “ Replicating Directory Changes”.
For more detailed information, see
http://themossblog.com/sharepoint-2010/sharepoint-2010-user-profile-synchronization-failing-event-id-6050
Best Regards.
Kelly Chen
TechNet Community Support

Fim Synchronization service 2010 r2

hello,
I am running FIM Synchronization service with different management agents. sometimes thing goes wrong. how can i monitor those tasks? I want to use powershell for than because i have a lot of other hings that i monitor that way.
is it possible to "GET" the status and dates with some kind of FIM cmdlets? or maybe via event log?
third-party modules is no option.
I hope one of u guys can point me in the right direction.
Kind regards
Harm Schutte

Hi Harm,
In addition to the FIM Cmdlets the FIM Synchronization Service event log also contains log entries when the Management Agent runs have warnings/errors. You would though need to filter down to the find the specific entries that you are after.
If third party products/modules aren't an option you could also look at using a scheduled task that gets triggered based on particular events happening in the Sync Service log - I probably wouldn't recommend it though.
Andrew.

Unable to refresh the schema of FIM MA.Getting an error in Event viewer ""the current version of database is not compatible with the one expected by Forefront Identity Manager service. The current version of database is : 1116. The expected version is :1"

Hi,
We have installed FIM MA with an account that have all the sufficient rights.It got created successfully and worked for Full Import and Full Sync. But, due to some version incompatabilities, we have installed a patch.PFB link for the patch.
http://support.microsoft.com/en-us/kb/2969673/en-us
Now, we are trying to refresh the schema of FIM MA. While doing that we are facing an error "Failed to connect to database". The user account with which we are connecting has read and write permissions on DB.In the event viewer some errors are
logged like "the current version of database is not compatible with the one expected by Forefront Identity Manager service. The current version of database is : 1116. The expected version is :1122" with event ID 3. PFB images for more detailed
view.
Please advice how to fix the issue.
Thanks
Prasanthi.

Hello,
seems to me that you maybe only updated the syncengine but not portal/webservice.
I had that error once after an recovery from scratch and forgot one of the hotfixes to apply to all services.
-Peter
Peter Stapf - ExpertCircle GmbH - My blog:
JustIDM.wordpress.com

Windows Service Manager 32-Bit Has Stopped Responding/iPod not showing up in iTunes

Hello,
I've scoured this forum for answers but I cannot find any result that works. I have an iPod classic that I've connected to my Gateway running Windows Vista for over four years without issue. When I was using iTunes 9 the other day, I plugged my iPod into my computer, but it only connected to My Computer and didn't connect to iTunes and update my iPod accordingly. So, the iPod is charging and the iPod is showing the "Connected, Eject before disconnecting" screen, but it isn't adding new music (which kind of defeats the purpose of buying new music). I thought it was because I was using 9, so I downloaded iTunes 10, but the issue still popped up.
This hasn't pop up today after I installed 10, but back when I was using iTunes 9 the following error came up on my computer: "Windows Service Manager 32-bit Has Stopped Working." Now, no error messages pop up, even though the problem persists.
I've tried suggestions in this post as well as in this post. Also, with the fix being recommended in those threads to change the code in Notepad by clicking "edit" under the System tab under My Computer? There's one problem - there is no edit button on my options. I've included a screen grab to prove this.
I don't know if the relative age of the discussions makes any difference - maybe a new fix has com up and i'm just not finding it? Plus, since this issue began with iTunes 9, I can't help but feel like getting rid of iTunes 10 is going to help the issue, either.
This is incredibly frustrating, not being able to add new music to my iPod, so if anyone can help me out, I would greatly appreciate it, as previously recommended ones aren't useful.
Screen grab of iPod connecting to My Computer, but not iTunes:
Screen grab of the lack of an "Edit" button in the place to edit codes as recommended in previous topics:

One again shamelessly asking for help

SQL 2012 Management Studio Remote Servers Service Status Slow/Stops Working

This is a huge annoyance. I manage about 50 SQL instances of SQL Server versions 2005-2012 and I noticed that it takes 1-2 seconds to load the service status (green arrow) on each individual server. If you then connect to a server, you have to
wait for all the statuses to be loaded first in the Registered Servers list before it loads the statuses for servers in the Object Explorer. This happens whether the servers are registered in Local Server Groups or Central Management Servers, and whether
I have access to all servers (as windows local administrator and sa), or not. It also happens regardless of whether I run as Administrator or normally on my instance of SSMS (which is SQL 2012 Development on Windows Server 2008 R2).
These servers are also registered in alphabetical order by group and server name, which means that if I have "DEV" groups, they will be registered before "PROD", unless I rename accordingly. It sometimes takes a few minutes, if
I'm lucky, to get a server I connect to to load, which means I can't use SSMS to really manage any remote servers and start/stop/pause/resume/restart services.
Worse, sometimes due to a server becoming unavailable (due to updates/patches/failovers), SSMS is unable to load the service statuses anymore for any new server connections made to object explorer, resulting in the loss of ability to view/change service statuses.
In this case, there is no way to recover (Refresh of Central Management Servers does nothing), except to close SSMS and open it again, and then wait again for all the statuses to load.
I have lived with this since first installing SQL, and regardless of the Windows Updates and SQL patches applied, the problem has never gone away. This also happens if I load SSMS in Windows Server 2012. Its starting to become a huge issue now
that I have to patch several servers each month.
I have already checked WMI permissions, GPO, firewall, etc. as per all the suggestion on the internet, including this post
http://www.sqlservercentral.com/Forums/Topic825246-146-1.aspx. None of these suggestions have made a difference, as my real problem is one of connectivity and performance, and
not security, which most of these suggestions apply to. Of note, all servers are in the same domain, firewall is disabled across the board, correct permissions for local administrators exist for remote registry settings, WMI, GPO, etc, and all service
accounts and windows accounts that are used are local admins and sysadmins.
My work-around has been to delete the Central Management Server and any local server group registered servers, close and re-launch SSMS, and then connect to a server I'm interested in via Object Explorer. Otherwise, close and re-launch will take forever.
My other alternative is to RDP into the remote server and manage services via SQL Configuration Manager locally.
If anyone has any ideas on how to fix this, or make it go faster, I'd really appreciate it.
Diane

Hi Satish,
Thanks for taking the time to reply. Yes, I actually am already using work-arounds (i.e. methods other than SSMS) to accomplish my tasks. My issue is that this is supposed to be working and provide a nice GUI so that you can easily visualize
any issues, and address them directly, without having to hodge-podge access via scripts or 3rd-Party tools.
Since no one else has any comments, I guess there are no plans to make remote server administration work with SSMS properly then, and that kludge methods are the only ones being advocated.
Diane

Need to stop the pop and Imap receive connectors to be able to start the pop and Imap services in Service Manager

Hello All,
I am hoping that someone else has run across this issue (may have started after CU5 was installed).
Upon every reboot I have found that the "Microsoft Exchange IMAP4" and "Microsoft Exchange POP3" services in the service manager will not start... basic reason in the event viewer is that the ports are already in use.
If I go into the ECP and disable my POP and Imap receive connectors I am able to then start the services.
After the services are started I can then go back to ECP and enable the receive connectors again and everything is fine .
Can anyone shed any light on this?
Thanks in advance ;)
Chris

Hello Winnie,
I bounced the Transport service tonight (adjusting spam filter levels)... so I was able to issue a stop and re-start of the IMAP4 and POP3 services in the service manager.
I stopped both the IMAP4 and POP3 services in service manager.
I issued the start of the services with PowerShell as requested:
PS C:\Users\administrator.XXXXXXXX> Start-service MSExchangePOP3
WARNING: Waiting for service 'Microsoft Exchange POP3 (MSExchangePOP3)' to start...
WARNING: Waiting for service 'Microsoft Exchange POP3 (MSExchangePOP3)' to start...
WARNING: Waiting for service 'Microsoft Exchange POP3 (MSExchangePOP3)' to start...
Start-service : Failed to start service 'Microsoft Exchange POP3 (MSExchangePOP3)'.
At line:1 char:1
+ Start-service MSExchangePOP3
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : OpenError: (System.ServiceProcess.ServiceController:ServiceController) [Start-Service],
   ServiceCommandException
    + FullyQualifiedErrorId : StartServiceFailed,Microsoft.PowerShell.Commands.StartServiceCommand
Then I first stopped the receive connector in ECP and issued the command:
PS C:\Users\administrator.XXXXXXXX> Start-service MSExchangePOP3
WARNING: Waiting for service 'Microsoft Exchange POP3 (MSExchangePOP3)' to start...
WARNING: Waiting for service 'Microsoft Exchange POP3 (MSExchangePOP3
With the receive connector disabled in ECP it was successfully started.... then I enabled the receive connector in ECP and all is fine now
repeated the same with IMAP4
to recap....
If I stop the IMAP4 and/or POP3 service in service manager, I must first disable the IMAP and/or POP receive connector in the ECP, then start the service in service manage.. and then finally go into ECP and enable the receive connector.
Thanks,
Chris
Chris

Stopping connections to Service Manager server during an upgrade

Planning an upgrade from 2012 SP1 to R2. The more I read, the more questions I have. Document from MS says to make sure there are no connections to the Service Manager server during the upgrade. How is this possible? Most of our connections are through
Citrix so we can check Citrix connections and disconnect them but what about local installs of the console on client computers? Is there some shell command to run to see active connections and terminate them? If so, how to you keep them from reconnecting?

It's not really a big deal. just declare downtime and shut down your load balancer. a few errant connections won't cause a problem, but any changes that are submitted may not be saved.

FIM Synchronization Service Manager Service Stopped infrequently

Similar Messages

Maybe you are looking for