Final cut express audio hangup

I'm doing a slideshow in Final Cut Express. The music plays fine in FCE but when I export it to a QT movie the music hangs in the same spot every time. Anybody?? I'm using OS 10.5.8 and FCE 4.0.1

What is the audio file?  If it's an MP3 you need to convert it to AIFF, 16-bit stereo.  MP3's do not work well in FCE.
Also, have you mixed down your audio? (Select the entire sequence, then do Sequence > Render Only  > Mixdown)

Similar Messages

  • Final Cut Express: Audio question. Please help!

    Hi, I'm new to Final Cut Express and I have a random question.
    I have a 2 minute video that I put into my timeline sequence. I added photos over some of the video and now I decided that I want to delete the rest of the video and audio since 2 minutes is too long. Well, now it will allow me to delete the video but not the audio. Does anyone know how to make in/out points for just the audio? and to cut it? Every time I make an in/out point, it only allows me to do it for the video. Now, I have this two minute-long audio that I need to get rid of that I just can't seem to delete/cut.
    If anyone out there can help me, I'd greatly appreciate it! Thanks.
    ~Alice

    You're making In and Out points in the timeline right? Make sure the autoselect buttons are black for the tracks you want to select.

  • Final Cut Express Audio Format

    I have been editing my video in Final Cut Express, setting bars and tones for -12 db, making sure my audio is peaking at -12db. I then use the "Export to Quicktime Movie" command to prepare it for making a dvd that will be used for broadcast tv.
    I then burn a dvd of this project with idvd.
    Can you tell me what kind of audio file is created by idvd and final cut express during this process? the Export to Quicktime Movie command does not give options regarding the audio file and I was under the assumption that using the Quicktime Conversion command might degrade the video quality a little.
    The network we are doing this for sends the dvd to be closed captioned and put onto a Beta tape and I just want to make sure we are compatible and that there is no audio degradation.
    Thanks so much.

    When you export from FCE to QuickTime Movie, the audio and video are both contained in the QuickTime file as parallel tracks. There is no separate file or extension for the audio. As far as I know, the audio is linear PCM, 48KHz stereo.
    On DVD there is also no separate file or extension for the audio. When iDVD encodes the audio & video for burning, the embedded audio is also linear PCM stereo.
    If you need to provide a DVD to your client, the DVD contains all the client needs and you don't need to worry about the encoding. If you were doing Dolby AC-3 or DTS it would be a different story, but iDVD only supports 2-channel stereo.

  • Final Cut Express Audio Listening Question

    I just installed Final Cut Express and have imported an iMovie project. When I listen to it the audio does not play. Instead I get a beeping sound. The wave forms show that the audio is there but I can't listen to it and I can't turn off the beeping. Is there an easy explanation for this?
    Many thanks.
    BTW, I also exported the iMovie as a quicktime movie and then imported it. Got the same result even though the quicktime movie playes perfectly.
    MacBook   Mac OS X (10.4.8)  

    Thanks, that seems to be the problem. Not very satisfactory though.
    How do I render the audio as is suggested in the link?
    MacBook   Mac OS X (10.4.8)  

  • Getting the following message on Final Cut Express "audio only capture selected video preview disabled" how can I get the video capture back?

    I'm getting the following message on screen when attempting to capture video  "audio only capture selected, video preview disabled."  How can I get the view preview back?

    FCE doesn't allow for audio only capture, it's in a twist somewhere.
    Try trashing the FCE preferences.
    Al

  • Final Cut Express won't capture audio with the video anymore, why?

    I have used Final Cut Express 4 for over a year now with no problems, but recently I am unable to capture any audio with the video from my camera. I can do it through iMovie no problem. I can't figure out if I changed a setting by accident because everything looks normal to me. Could another program be interfering with this? Quicktime Pro? I have no idea how to fix this.

    First of all, we need a bunch of information in order to help. Please provide the specs of the footage and the sequence you are using. Also, are you using DV, HDV, or AVCHD? Do you hear audio when the clip is played in the viewer, or is there no audio at all once the clip is captured/ingested?

  • Rip Audio From Final Cut Express

    Is it possible to rip audio from an MPEG Video in Final Cut Express and save a copy of JUST the audio file as .mp3? I know you can do this with QT Pro, but I'm going to be getting Final Cut Express down the road and I need to be able to do this. So I will just get FCE now if it can perform this function and not waste money on QT Pro.
    Thanks!
    A

    Well, there's all kinds of flavors of 'MPEG Video' out there, knowing what you're using would help.
    QuickTime Pro can do this, and it's not a waste of $20 to get it.
    You can also use MPEG Streamclip to extract the audio to AIFF, then use iTunes to convert to MP3 if that's what you really want.

  • Final Cut Express:  No audio when capturing from camcorder

    When capturing video from my "Sony TRV 18" digital camcorder and a Canon ZR500 digital camcorder
    into Final Cut Express 4.0.1 via fire wire to my scratch disk - a LaCie external hard drive -
    I get the video in my browser but it has no accompanying audio.
    When I move a captured clip from the browser to the viewer and time line, the video shows up, but (1) there is no accompanying audio shown in the audio time line, (2) no audio can be heard and (3) the audio meters show no action.
    My Easy Setup settings for audio match my camera audio settings.
    I've used different firewires between the camera and the scratch disk. Still the same.
    This has been a problem for about a month. Everything worked fine before. To make project deadlines, I have worked around this anomaly by capturing clips in IMovie 4 on my older Mac laptop than transferring the media clips to my Final Cut Express scratch disk. That works, but it is time consuming and requires rendering of all the audio.
    I use an IMac with OSX 10.6.5 with 266 GHz intel Core i5.
    Thank you in advance for any tips that could help.

    Hi Sid
    I get the video in my browser but it has no accompanying audio.
    YES - This is the way FinalCut Express AND Pro works !
    If You need the audio - Then You connect a small set of speakers to Your miniDV Camera
    (headphone out)
    alt. if no phono-out on Camera is to connect a small TV to the Camera analog way
    and here You can both see and hear during Capture
    (BTW - Connecting a small TV (or if §§§§§ is no problem a reference monitor
    §5-10,000 or even more) is a Very good way of keeping Quality control during
    editing process. Eg Transitions, audio levels, color fidelity etc. I do and the
    ref monitor are well compared to my final DVDs.)
    There are NO WAY that You can monitor audio during Capture in any FinalCut versions !
    Yours (been there and done that - or as said in Sweden "butted Your head at it") Bengt W

  • Audio De-Sync during Capture in Final Cut Express

    Hi, I use Final Cut Express HD and have recently come across an unusual problem. When capturing footage I find that around five minutes in or so the video freezes for a few moments. After the footage has been captured the audio now goes out of sync at the point the video froze, lasting for the remainder of the clip. I've tried different settings in the easy setup but the problem persists. I only got this new mac recently and the problem happened right after I installed it.
    The only changes I have made to the set up was that I moved the folder that all of the footage/renders etc. to another part of the mac, which cFinal cut made me reassign in it's menus. Could this be the cause?
    I do a lot of work in Final Cut and this is a large problem for me. Any help at all would be greatly appreciated.

    If you have been altering the Easy Setups a lot you may have corrupted the preferences.
    So trash them completely like this
    Misc1 Trash Prefs
    Then set the correct Easy Setup.
    If you are not sure which to use let us know exactly what video format you are using.

  • How to add audio track to Final Cut Express

    Does anyone know how to add a audio track to Final Cut Express? My default is four available tracks. What if I want to have 6? How can I add a additional two to the timeline?

    Move your cursor into the gray area below the A4 audio track, then control click and select Add Track.

  • Audio track during export corrupted in Final Cut Express 4

    I'm using final cut express in the latest version for the cut of a movie from different compresses sources from digital camperas (.mov, .avi, etc.). Everything is now set, the movie would be ready for export and looks good in preview.
    After exporting the movie (no matter, if I compress the file or not) in the middle of a 5 minute take the audio track gets a problem (at 15mins. in the movie) and repeats the same sequence of audio (2 secs) until the end of the take (sorry don't know the correct english expression for that). After that other takes code fine again. Video is no affected and code without problem.
    This error is repeatable on my machine, no matter which version of Final Cut Express I use (before and after the latest updates) and operating system (10.5 and 10.6). Also a reconnection of all videos and rendering of the complete movie did not help.
    I'm really lost here, any ideas? I don't even know a workaround.

    Thanks! Downloaded Streamclip and tried my first conversion. However, now I even made FCE crash;-) The H.264 codec seems not to be the right one. What would be the best one? Apple Intermediate Codec / Apple Motion Jpeg / Apple FCP uncompressed 10bit / Apple FCP Uncompressed 8 Bit / ..... I'm somehow lost in the possibilities and goo gle didn't help either. So I have to count on you again. Any suggestions?
    Message was edited by: pisker

  • My Final Cut Express 2 won't import any audio or export anything

    My Final Cut Express 2 won't import mp4s or any audio or export anything. I have been using compressor only. I have recently just changed to Tiger 10.4.11

    Final Cut Express does not work with MP4s.  You need to convert the MP4 video to QuickTime DV or QuickTime Apple Intermediate Codec before importing it into FCE.  Which one to use depends on the properties of the MP4 video you have ... basically, if it's standard def 4:3 then convert to QuickTime DV (NTSC if you are in North America, PAL if you are in Eurpope) ... high def 16:9 should be converted to QuickTime Apple Intermediate Codec.
    In most cases you can use MPEG Streamclip to do the conversion.
    As for audio files, they need to be AIFF, 16-bit (aka 48KHz), stereo.   If they are not AIFF format you need to convert them ... you can use iTunes or almost any audio editing software to convert audio files.

  • Audio transitions in Final Cut Express--Not Allowing

    I'm trying to drag and drop an audio transition (specifically, Cross Fade 0dB) in between two mp3s that I imported into Final Cut Express and which currently reside on the A1 and A2 audio tracks. When I attempt to do so, I get an "X" telling me that I can't. I have rendered everything that needs to be rendered, video and audio. What else do I need to do? All honest help appreciated. Screen shot available upon request.

    Okay, done...this FCE is a picky b*&ch. Hope it's worth the trouble. It's my first day playing with it, but man, what a friggin' learning curve. Not to brag, but I consider myself gifted when it comes to computers...and this thing is giving me a headache...
    While I have your attention, if you don't mind me throwing in an unrelated question, my iTunes has suddenly been experiencing slowdowns. I don't mean 0.5- to 1.0-second slowdowns. I mean 5-second slowdowns where the spinning carousel keeps me from doing anything. How can I research to see if I have inadvertently installed some software that is doing this BS? It is rather irritating!!

  • Audio problems in Final Cut Express

    I have edited 4 sequences successfully within a project. Everything was working fine audio and video. All material is saved to my external scratch disk. I left the project to take a break (saving it first of course). When I came back the audio is not working. I have not changed any settings and have tried to obvious like checking the volume on the computer. I know the audio is still there because the levels are moving and correct. I just can't hear it. This is the second or third time this is happened?
    At one point I needed to capture some material and following capture it seemed to work again. Then I lost it again. I thought I would try capturing more material to see if I would have the same luck but not this time.
    I am fairly new to editing and to Final Cut Express. Any help would be greatly appreciated.
    Thanks

    http://www.fcpbook.com/Audio2.html

  • Final Cut Express issues: Video and no audio

    Ok.. sorry about before. I posted in someone elses message, for that I'm sorry.
    My name is Justin Smith. I'm a freelance videographer out in Kansas. I have a brand new Macbook Pro. I'm shooting with a Dvx-100. I took my camera and tried to import video into Final Cut Express. When the short video clip was finished capturing, I tried putting it to the timeline, but only the video was added. So I have video, no audio and a bunch of questions. How do I get my orginal audio from the tape onto the timeline? Also, I have a question about importing audio from say Itunes. I can import the song fine, But when I lay the track down on the timeline, I'm getting a continuous beep noise. I read the FAQ and it told me I have to convert the track to AIFF? How do I do this?

    As for importing audio from iTunes, yes, you must convert it to AIFF first. iTunes can do this unless you purchased the songs from the iTunes Music Store. If you did, they are protected AAC files and won't convert. There are ways to do it but since it most likely violates the copyright, no one on this forum can legally tell you how to do it.
    If they are not protected, then go to iTunes preferences, select the Advanced icon at the top and click the Importing tab. Select AIFF encoder from the "Import Using" popup menu and make sure the settings are 48khz. Then select the song from the library and choose (from the menu bar) Advanced->Convert Selection To AIFF. A new music file in AIFF format will appear in your library.
    Another way is to use Quicktime Pro (the paid version of Quicktime). Open the music file in Quicktime, choose Export and select AIFF, 48Khz, 16bit for the format. Again, this won't work if its an iTunes protected file.

Maybe you are looking for