Finally i connected to my wifi network
i did not remember what i did in the settings but now my İphone 3GS connected the my wifi point clearly!
okay, I reset my router to factory defaults, unplug and plug in the cable modem, unplug and plug in the router, and now it seems to be working (crosses fingers).
Similar Messages
-
Deskjet 3050 not connecting to my wifi network
Accidentally pressed Restore Default and my printer will not connect to my wifi network. How do reinstall it please?
Hi @Rotini
A full feature driver for Yosemite is not available for your printer, either from the CD that shipped with your printer or from the HP website. This document applies to HP printers supported in Mac OS X versions 10.6 (Snow Leopard), 10.7 (Lion), 10.8 (Mountain Lion), 10.9 (Mavericks), and 10.10 (Yosemite) that only have drivers available through Apple Software Update.
With that being said, I can help you put the printer on your wireless network without software. I use this method for iPads, iPhones and other devices that do not have software.
Restore the network defaults on the printer by pushing the wireless button, going to settings, and then restore defaults. The wireless button should then start flashing, this means it is now in autowireless mode.
Connect to the network that the printer is broadcasting. It is usually HP-setup-3050a and then part of the MAC address. The wireless light will still be flashing on the printer at this point, this is normal since this is not an actual adhoc connection.
Load up the Embedded Web Server (EWS) in the browser on your mobile device. The default IP for autowireless is 192.168.223.1.
Go to the network tab along the top of the EWS.
Click on Wireless Setup Wizard along the lefthand side to begin configuring the printer.
You have now completed the Wireless configuration, follow the next 3 steps to start printing.
The blue wireless light will go solid, put the Mac back on your own network.
Add the printer to the System Preferences.
Print
Please let me know if this resolves the issue. I look forward to hear from you.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP -
when i click on safari to use the internet it says "safari cannot open the page because it is not connected to the internet", but i am connected to a wifi network so how do i get safari to work?
you may be connected to the wireless network but the question is the internet working properly on the wireless network...
what i mean is that i can make a wireless network without the internet so i can save and share files and have other devices connected to the same network access them... but you have to make sure that your internet it running properly... may have to reconfigure the router is your using PPPOE or if it was working prior to your post then try to restart your modem... that usually resolves most issues. -
Hello all, I could use some help with my iPhone 4, I hope this is the best place to ask!
The Problem:
I want to do a full backup of my iphone to either itunes or to icloud. Unfortunately the iphone got wet and isn’t working properly. The phone turns on and still works, but the touch screen no longer works. I have a passcode lock on the phone so iTunes will not allow me to backup it up until I type in the passcode (which I cannot physically do). WiFi had been turned off before it got wet so it won’t connect to any known WiFi networks either to backup automatically to iCloud.
What happened:
I had been travelling for 6 months and went tubing on a river with my iphone in a dry bag. Unfortunately the dry bag failed and filled with water ruining my iphone.
What I’d like to do:
It’s an old phone and I was planning on buying a new iPhone anyway. I would love to do a full backup to either iCloud or to my computer so when I get a new iPhone I don’t lose anything. I’ve already connected it to my PC and downloaded all the photos and videos off the phone so at least I haven’t lost that, but I would like to be able to recover all the text messages, WhatsApp messages and notes I had created during my 6 months of travel.
The last time it was backed up to my pc or to icloud was in April, so there are 6 months worth of very meaningful data I would love to keep to remind me of my travels!
Is there anyway to force a full backup of the iPhone without typing in my passcode lock or is there anyway to force it to connect to a WiFi network so the phone can backup to iCloud??
iTunes recognizes the phone just now and I tried upgrading the phone to iOS7 in the hopes that it would first backup and then upgrade. Unfortunately all that happened is the phone upgraded to iOS7, but it didn’t backup to iTunes. Now the phone is stuck at the iOS7 welcome screen and I can’t do anything else with it.
Any ideas or tips would be welcome!
NOTE: This is NOT a jailbroken iPhone.If there is no other way around this, is there anyway to completely wipe the phone then??
The Apple store agreed to give me a new iPhone 4 as a warranty replacement for $150 (I travel a lot and I have a factory unlocked phone, so this is still worth it for me). But before I trade it in, I would like to make sure all my data is backed up on the device first.
When I try and restore the phone now on iTunes, it says I have to turn off Find My iPhone on the phone first before I can restore it. Now since I can't use the screen I can't really do that.
So how do I completely wipe the iPhone???
Thanks! -
My apple TV is finding and connecting to the Wifi network but then says it is not connected to the internet and then I cannot find it on the iPad through airplay. I don't want it connected to the internet (as in www.) because for the use I have I only need to use the Apple tvs locally in a sports hall as scoreboards. I have 3 others working on the same router and they are working fine (as of yesterday)
On my screen I see (obviously not written like this)
network connect- yes
signal strength- fine
Ip address- fine
DCN- fine
Activation- Failed
This is the only negative I can find and the statement that the Apple TV has connected to the wifi but is not connected to the internet.
Where has it gone wrong for me. Please helpIt is not properly connected to the network.
Make sure location is set correctly
DNS should be on auto (settings - general - network)
Try ethernet
Signal strength on device won't account for issues, you would need a network report from istumbler, netstumbler or similar. This will show accurate signal strength along with noise and nearby networks -
Can't Connect to any WiFi network
I just got my iPhone yesterday and I'm already having a serious problem,I can't connect to any WiFi networks.
I can see the networks around me and I can select networks that I've setup and I know are open or I know the security passwords, I can even enter the network passwords for the ones that require them and it accepts them without complaint. When I select a network I get a little check mark next to that network which I assumes means it should be connected to that network. However, the iPhone never actually connects to them, i.e. no IP address, no router no nothing in the network settings screen for each network, and always appears to the using the Edge wireless network when accessing the internet.
I've tried DHCP and static IP but neither works.
I updated the phones software to 1.1.4, has anybody reported problems like this with this or any version of the software.
Any help would be much appriciated.
If I can't get this resolved today I'm returning to the AT&T store tonight for a new one.
Thanks
Matt S.theevilone,
I have personally used an iPhone with routers from D-Link, Netgear, Linksys, Apple and Belkin.
Some routers, regardless of manufacturer need to have their firmware updated. Generally speaking if you look at the release notes, the same updates that resolve issues with DHCP for game systems and PDAs, also resolves them for the iPhone.
In addition hardware or MAC address filtering can cause issues where you connect to the network and not get DHCP.
Hope this helps,
Nathan C. -
Hi
When I try to connect to my wifi network I receive message "Unable to join network "Netgear" this starated as of 8/16 before thsn I never had this problem
connecting to this network previously .I have attempted after manually entry of DNS still nothing a;so did the network reset, and full reset of settings and still
get nothing I even have my network unsecured at this very moment still nothing changed it does not show the network info ; no DNS address or anything any suggestions- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router.
- Reset networks settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points -
My ipad mini is not connecting to the wifi network. I have the correct network and password chosen, but the message I get is that "unable to join". I have reset my ipad and it still says the same thing. What can I do about this?
Hey Dr kris,
Thanks for the question, and welcome to Apple Support Communities.
I understand that you are having issues connecting to Wi-Fi networks with your iPad mini. The following troubleshooting assistant may lead to a resolution:
Apple - Support - iPhone - Join a network Assistant
http://www.apple.com/support/iphone/assistant/wifi/
For more in-depth troubleshooting, refer to the following article (refer to the "Unable to connect to a Wi-Fi network):
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
Thanks,
Matt M. -
my ipod 5 was just recently stolen in a waterpark (same with my best friend) and when i went on to find my ipod I pressed play sound and lost mode but it never successfully did all those things because my ipod wasn't or isn't connected to a wifi network as it says in the app. so how will I ever find my ipod if it never is going to connect to a wifi network without the thief accessing my ipod (I have a passcode). and also when I check the app once in a while it says ipod is online but cannot find location, so does that mean the thief is using my ipod or is trying to get in?
Yo are correct. It has to connect to internet for the FindMyiPhne features to be transmitted to the iPod
lost/stolen
No app on the iPod is required.
- If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected, on a computer browser go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up or conbtinue to show off-line.
- You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
iCloud: Erase your device
iCloud: Use Lost Mode
- If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the iPod and report to police
- There is no way to prevent someone from restoring the iPod (it erases it) using it unless you had iOS 7 on the device. With iOS 7, one has to enter the Apple ID and password to restore the device.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number -
Setting up my brand new MacBook Pro and it will not connect to the wifi network. Nothing wrong with the network which is happily working for my iPhone and iPad! Suggestions accepted for making this connection.
Fixing this is a two step process:
1) System preferences > WiFi/Airport ...
... check [√] Ask to join new networks
"Known networks will be joined automatically.
If no known networks are available, you will
be asked before joining a new network."
2) Remove unwanted networks from the list of "known" networks under
System preferences > WiFi/Airport > (Advanced) > | Airport/WiFi pane ...
Close the window and save changes. If no joy, do a restart to ensure you are playing under the new rules. -
I am able to connect to my wifi network but am not able to connect to other computers on my network
I am able to connect to my wifi network but am not able to connect to other computers on my network. I have installed windows 7 on parallels desktop, from windows i am able to access my network computers. But from Mac i can only access internet but not network computers Please help
Ok, well if you're sure that there are shared folders on your PC's, then try this:
Click somewhere on desktop, so you're in finder > Go > Connect to Server (shortcut to all of this is Command + K) then type in: smb://ipaddresshere
eg:
smb://192.168.1.7
Then either connect as guest, or login with the PC's (not your mac's) username & password. -
Can't send emails from a btinternet address unless connected to a WiFi network
I am a UK user with an iPhone 5 and Vodafone as my ISP. After installing IOS 7 both gmail and btinternet addresses continued to work well until I upgraded to IOS 7.0.2 since when while I have been able to receive emails with a btinternet address I cannot send when not connected to a WiFi network and 3G makes no difference - gmail will still receive and send however.
Does anyone have a solution please?
Mike SearchfieldReally hard to diagnose without being there, but check with your friend that they don't have any softward filters on wireless router that block ports etc. If it's not your friends wireless, it could be something much more simple like needing to just restart your ipad to reset settings. Good Luck!
-
After updating my iPhone 5 to iOS 8.1 it will not connect to the wifi network at work even though it recognizes it. It however still automatically connects to the network at home (this is the network I used to update the phone). My iPad however does not seem to have any problem connecting. I have restared the phone, toggled the router, re-entered the network password but there's still no connection.
When your device is trying to connect to the work Wi-Fi network, go to Settings > Wi-Fi > then tap on the name of the Netowrk that she is having trouble with. Then tap on forget this network. Let the device attempt to connect again and make absolutely sure she is trying to connect to the work network and not a nearby network, then make absolutely sure the password is entered correctly.
-
my mini is connected to the wifi network, but is not able to connect to the working internet... can anybody help, please?
192 is local address within your network.
Unless the adddress is of a server that can reolve URL names to ip addresses you wont be able to load an external web page.
You can check what it should be by checking your router status page.
Or if you have an iOS device check under settings, W-Fi, select the network your attched to, then see what is next to DNS.
DG -
Connect MacBook to wifi network via Ethernet
I am looking for a way to connect my MacBook to my wifi network via my Ethernet port. I'm not having any trouble with the wifi but am looking at getting an apple tv and wish to be able to use wolan. As far as I know, wowlan is only available using the apple airport routers. Is there something I can get that plugs into my Ethernet port on my MacBook, connects to the wifi network and lets my MacBook treat it as a wired connection so I can use wolan? I assume something like this would. E cheaper than buying an apple router that supports wowlan...?
Also, how do I make sure that my current router actually supports wolan?
Thanks.We assume that you are trying to configure the AirPort Express to "join" your wireless network. In order to do so, you must enter in the wireless network name, exact type of security and password that your network is using.
Mistakes are often made with the security settings because different manufacturers use different nomenclature to mean the same thing. For example
WPA2 Personal on Apple = WPA2-PSK-AES on other wireless routers
or
WPA/WPA2 Personal on Apple = WPA-PSK-TKIP on other wireless routers
Can you dig a bit deeper into your settings on your router to find out whether you are using AES or TKIP? Once you find that info, you should be able to match up the correct setting on the AirPort Express during the configuration.
Don't be fooled by the the message that you see when you click Update during the configuration process. The message states something to the effect that the settings have been stored successfully on the AirPort Express. What it doe not tell you is whether the settings that were stored are the correct settings.
You will know that you have the correct settings when you see a green light on the AirPort Express 40-45 seconds after you click the Update button.
Maybe you are looking for
-
How to use 2 ALVs in a Single view. I need to take refernce of them individually, so that i can confgure them, independant of each other Thanks, Selvakumar M.
-
Thunderbolt Display USB ports not working after 1.2 firmware update
I installed the Thunderbolt Display Firmware Update 1.2 a few days back, and following that update, the USB ports on my display have stopped working completely. The display's Thunderbolt port and Ethernet jacks are working fine, as is the Thunderbolt
-
Price updation in Material Master after confirmation
Dear Gurus, When we create a production order for Semi finished which is maintained with Moving Average Price(MAP) in material master and we do confirmation of the order with "CO15'. My client wants after goods receipts against 101 movement type the
-
Colors not printing correctly. Only blue and black work.
I just got a new HP OfficeJet all in one inkjet 8620 printer. The colors aren't printing correctly. Everything comes out light blue with black lettering. I tried installing new cartridges (genuine HP) and also tried gently shaking the cartridges. But
-
I went with Nokia N70 on orange because of various features including quickword. I have purchased UIQ software that does the same thing including editing etc for my previous phone. On getting the phone a few things were not as I expected including th